summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-07-26dma: mxs-dma: fix unterminated platform_device_id tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26dmaengine: pl330: make platform data optionalRob Herring
The pl330 needs platform data for describing peripheral connections, but some platforms may only support memory to memory dma channels. In this case, we can probe for how many channels there are and don't need the platform data. As memcpy requests don't need channel private data to hold peripheral info, allow private data to be NULL in this case. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vkoul@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-25dmaengine: imx-sdma: return proper error if kzalloc failsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-25pch_dma: Fix CTL register access issueTomoya MORINAGA
Currently, Mode-Control register is accessed by read-modify-write. According to DMA hardware specifications datasheet, prohibits this method. Because this register resets to 0 by DMA HW after DMA transfer completes. Thus, current read-modify-write processing can cause unexpected behavior. The datasheet says in case of writing Mode-Control register, set the value for only target channel, the others must set '11b'. e.g. Set DMA0=01b DMA11=10b CTL0=33333331h CTL2=00002333h NOTE: CTL0 includes DMA0~7 Mode-Control register. CTL2 includes DMA8~11 Mode-Control register. This patch modifies the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine: mxs-dma: skip request_irq for NO_IRQShawn Guo
In general, the mxs-dma users get separate irq for each channel, but gpmi is special one which has only one irq shared by all gpmi channels. It causes mxs_dma channel allocation function fail for all other gpmi channels except the first one calling into the function. The patch gets request_irq call skipped for NO_IRQ case, and leaves this gpmi specific quirk to gpmi driver to sort out. It will fix above problem if gpmi driver sets chan_irq as gpmi irq for only one channel and NO_IRQ for all the rest channels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/coh901318: fix slave submission semanticsLinus Walleij
While testing Per Forlins MMC speed improvements I noticed a semantic bug in the COH901318 driver: it will write to channel registers in the prep_slave_sg() function, instead of deferring it to later, breaking the assumption from the drivers to be able to queue up new jobs while another job is running. Fix this by storing up the initial register writes in the job descriptors and write them to hardware when we process the descriptor instead. Now the stress tests work. Acked-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: allow memory buswidth/burst to be configuredRabin Vincent
Currently the runtime config implementation forces the memory side parameters to be the same as the peripheral side. Allow these to be different, and check for misconfiguration. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Tested-by: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: use AMBA PrimeCell helper macrosLinus Walleij
The DMA40 is not a PrimeCell from ARM, but it still use the same ID registers. So let's utilize the existing macros in the PrimeCell header to identify manufacturer and revision of the IP block instead of reinventing the wheel. Cc: Robert Marklund <robert.marklund@stericsson.com> Cc: Per Forlin <per.forlin@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: make the cyclic alloc NOWAITRobert Marklund
This function may be initiated from IRQ context, so the allocation must allocate NOWAIT memory. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: fix missing kernel-docom prakash
Missing documentation creates kernel-doc warnings, so add the documenation. Signed-off-by: Om Prakash <omprakash.pal@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine: remove ste_dma40 from issue_pending TODOPer Forlin
ste_dma40 now implements issue_pending according to documentation. Submit adds descriptos to a pending queue with are flushed down to the DMAC at issue_pending. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dmaengine/ste_dma40: add a separate queue for pending requestsPer Forlin
tx_submit will add descriptors to the pending queue. Issue pending will then move the pending descriptors to the transfer queue. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14pch_dma: Fix channel lockingAlexander Stein
Fix for the following INFO message ================================= [ INFO: inconsistent lock state ] 2.6.39+ #89 --------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. rs232/822 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&pd_chan->lock)->rlock){?.....}, at: [<c123b9a1>] pdc_desc_get+0x16/0xab {HARDIRQ-ON-W} state was registered at: [<c104fe28>] mark_irqflags+0xbd/0x11a [<c1050386>] __lock_acquire+0x501/0x6bb [<c1050945>] lock_acquire+0x63/0x7b [<c131c51d>] _raw_spin_lock_bh+0x43/0x51 [<c123bee4>] pd_alloc_chan_resources+0x92/0x11e [<c123ad62>] dma_chan_get+0x9b/0x107 [<c123b2d1>] __dma_request_channel+0x61/0xdc [<c11ba24b>] pch_request_dma+0x61/0x19e [<c11bb3b8>] pch_uart_startup+0x16a/0x1a2 [<c11b8446>] uart_startup+0x87/0x147 [<c11b9183>] uart_open+0x117/0x13e [<c11a5c7d>] tty_open+0x23c/0x34c [<c1097705>] chrdev_open+0x140/0x15f [<c10930a6>] __dentry_open.clone.14+0x14a/0x22b [<c1093dfb>] nameidata_to_filp+0x36/0x40 [<c109f28b>] do_last+0x513/0x635 [<c109f4af>] path_openat+0x9c/0x2aa [<c109f6e4>] do_filp_open+0x27/0x69 [<c1093f02>] do_sys_open+0xfd/0x184 [<c1093fad>] sys_open+0x24/0x2a [<c131d58c>] sysenter_do_call+0x12/0x32 irq event stamp: 2522 hardirqs last enabled at (2521): [<c131ca3b>] _raw_spin_unlock_irqrestore+0x36/0x52 hardirqs last disabled at (2522): [<c131db27>] common_interrupt+0x27/0x34 softirqs last enabled at (2354): [<c102fa11>] __do_softirq+0x10a/0x11a softirqs last disabled at (2299): [<c10041a4>] do_softirq+0x57/0xa4 other info that might help us debug this: 2 locks held by rs232/822: #0: (&tty->atomic_write_lock){+.+.+.}, at: [<c11a4b7a>] tty_write_lock+0x14/0x3c #1: (&port_lock_key){-.....}, at: [<c11bad72>] pch_uart_interrupt+0x17/0x1e9 stack backtrace: Pid: 822, comm: rs232 Not tainted 2.6.39+ #89 Call Trace: [<c1319f90>] ? printk+0x19/0x1b [<c104f893>] print_usage_bug+0x184/0x18f [<c104e5b1>] ? print_irq_inversion_bug+0x10e/0x10e [<c104f943>] mark_lock_irq+0xa5/0x1f6 [<c104fc9c>] mark_lock+0x208/0x2d7 [<c104fdc0>] mark_irqflags+0x55/0x11a [<c1050386>] __lock_acquire+0x501/0x6bb [<c10042ee>] ? dump_trace+0x92/0xb6 [<c1050945>] lock_acquire+0x63/0x7b [<c123b9a1>] ? pdc_desc_get+0x16/0xab [<c131c2d0>] _raw_spin_lock+0x3e/0x4c [<c123b9a1>] ? pdc_desc_get+0x16/0xab [<c123b9a1>] pdc_desc_get+0x16/0xab [<c10504d8>] ? __lock_acquire+0x653/0x6bb [<c123bb2c>] pd_prep_slave_sg+0x7c/0x1cb [<c1006c3f>] ? nommu_map_sg+0x6e/0x81 [<c11bace6>] dma_handle_tx+0x2cf/0x344 [<c11bad72>] ? pch_uart_interrupt+0x17/0x1e9 [<c11baebb>] pch_uart_interrupt+0x160/0x1e9 [<c10642fb>] handle_irq_event_percpu+0x25/0x127 [<c1064429>] handle_irq_event+0x2c/0x43 [<c1065e0d>] ? handle_fasteoi_irq+0x84/0x84 [<c1065eb9>] handle_edge_irq+0xac/0xce <IRQ> [<c1003ecb>] ? do_IRQ+0x38/0x9d [<c131db2e>] ? common_interrupt+0x2e/0x34 [<c105007b>] ? __lock_acquire+0x1f6/0x6bb [<c131ca3d>] ? _raw_spin_unlock_irqrestore+0x38/0x52 [<c11b798b>] ? uart_start+0x2d/0x32 [<c11b7998>] ? uart_flush_chars+0x8/0xa [<c11a7962>] ? n_tty_write+0x12c/0x1c6 [<c1027a73>] ? try_to_wake_up+0x251/0x251 [<c11a4d0b>] ? tty_write+0x169/0x1dc [<c11a7836>] ? n_tty_ioctl+0xb7/0xb7 [<c1094841>] ? vfs_write+0x91/0x10d [<c11a4ba2>] ? tty_write_lock+0x3c/0x3c [<c1094a69>] ? sys_write+0x3e/0x63 [<c131d58c>] ? sysenter_do_call+0x12/0x32 Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Tested-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14dma: mv_xor: use resource_size()H Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Dan Williams <dan.j.williams@intel.com> (supporter:ASYNCHRONOUS TRAN...) Cc: Vinod Koul <vinod.koul@intel.com> (supporter:DMA GENERIC OFFLO...) Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-24dmaengine: failure to get a specific DMA channel is not criticalGuennadi Liakhovetski
There exist systems with multiple DMA controllers with different capabilities. For example, on some sh-mobile / rmobile systems there are DMA controllers, whose channels can be configured to be used with SD- and MMC-host controllers, serial ports etc. Besides there are also DMA controllers, that can only be used for one special function, e.g., for USB. In such cases the DMA client filter function can just choose to specify to the DMA driver, which channel it needs. Then the .device_alloc_chan_resources() method of the DMA driver will check, whether it can provide that dunction. If not, it will fail and the loop in __dma_request_channel() will continue to the next DMA device, until it finds a suitable one. This works fine with just one minor glitch: the kernel logs error messages like dmaengine: failed to get <channel name>: (-<error code>) after each such non-critical failure. This patch lowers priority of this message to the debug level. Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Magnus Damm <damm@opensource.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-16dma/ep93xx_dma.c: local symbols should be staticH Hartley Sweeten
The symbol 'ep93xx_dma_prep_dma_memcpy' is only used in this driver and should be marked static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-09Merge remote branch 'gpio/ep93xx-dma' into nextVinod Koul
2011-06-08spi/ep93xx: add DMA supportMika Westerberg
This patch adds DMA support for the EP93xx SPI driver. By default the DMA is not enabled but it can be enabled by setting ep93xx_spi_info.use_dma to true in board configuration file. Note that the SPI driver still uses PIO for small transfers (<= 8 bytes) for performance reasons. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08ep93xx: remove the old M2P DMA codeMika Westerberg
Since we have converted all existing users of the old DMA API to use the DMA engine API the old code can be dropped. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08ASoC: ep93xx: convert to use the DMA engine APIMika Westerberg
Now that we have the EP93xx DMA engine driver in place, we convert the ASoC drivers (I2S, AC97 and PCM) to take advantage of this new API. There are no functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08ep93xx: add dmaengine platform codeMika Westerberg
Add platform support code for the new EP93xx dmaengine driver. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08dmaengine: add ep93xx DMA supportMika Westerberg
The ep93xx DMA controller has 10 independent memory to peripheral (M2P) channels, and 2 dedicated memory to memory (M2M) channels. M2M channels can also be used by SPI and IDE to perform DMA transfers to/from their memory mapped FIFOs. This driver supports both M2P and M2M channels with DMA_SLAVE, DMA_CYCLIC and DMA_MEMCPY (M2M only) capabilities. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08Merge remote-tracking branch 'origin' into spi/mergeGrant Likely
2011-06-08spi/rtc-m41t93: Use spi_get_drvdata() for SPI devicesGeert Uytterhoeven
One new offender detected by the recently increased type checking in platform_get_drvdata(): drivers/rtc/rtc-m41t93.c: In function ‘m41t93_remove’: drivers/rtc/rtc-m41t93.c:192: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type Use spi_get_drvdata() instead of platform_get_drvdata(), cfr. commit 42fea15d6dc410e62dac6a764142045280624a5b ("spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06Linux 3.0-rc2v3.0-rc2Linus Torvalds
2011-06-06mm: fix ENOSPC returned by handle_mm_fault()Hugh Dickins
Al Viro observes that in the hugetlb case, handle_mm_fault() may return a value of the kind ENOSPC when its caller is expecting a value of the kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb - turn off de-emphasis in s/pdif for cm6206 ALSA: asihpi: Use angle brackets for system includes ALSA: fm801: add error handling if auto-detect fails ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd() ALSA: 6fire: Don't leak firmware in error path ASoC: Fix wm_hubs input PGA ZC bits ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared
2011-06-06Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (max6642): Better chip detection schema hwmon: (coretemp) Further relax temperature range checks hwmon: (coretemp) Fix TjMax detection for older CPUs hwmon: (coretemp) Relax target temperature range check hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault
2011-06-06dma: at_hdmac.c: use resource_sizeH Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06dma: ipu_idmac.c: use resource_size in ioremapH Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-06-06spi/ep93xx: add DMA supportMika Westerberg
This patch adds DMA support for the EP93xx SPI driver. By default the DMA is not enabled but it can be enabled by setting ep93xx_spi_info.use_dma to true in board configuration file. Note that the SPI driver still uses PIO for small transfers (<= 8 bytes) for performance reasons. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06ep93xx: remove the old M2P DMA codeMika Westerberg
Since we have converted all existing users of the old DMA API to use the DMA engine API the old code can be dropped. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06ASoC: ep93xx: convert to use the DMA engine APIMika Westerberg
Now that we have the EP93xx DMA engine driver in place, we convert the ASoC drivers (I2S, AC97 and PCM) to take advantage of this new API. There are no functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06ep93xx: add dmaengine platform codeMika Westerberg
Add platform support code for the new EP93xx dmaengine driver. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06dmaengine: add ep93xx DMA supportMika Westerberg
The ep93xx DMA controller has 10 independent memory to peripheral (M2P) channels, and 2 dedicated memory to memory (M2M) channels. M2M channels can also be used by SPI and IDE to perform DMA transfers to/from their memory mapped FIFOs. This driver supports both M2P and M2M channels with DMA_SLAVE, DMA_CYCLIC and DMA_MEMCPY (M2M only) capabilities. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-05Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: Tegra: Harmony: Fix conflicting GPIO numbering
2011-06-04ARM: Tegra: Harmony: Fix conflicting GPIO numberingStephen Warren
Currently, both the WM8903 and TPS6586x chips attempt to register with gpiolib using the same GPIO numbers. This causes the audio driver to fail to initialize. To solve this, add a define to board-harmony.h for the TPS6586x, and make board-harmony-power.c use this define, instead of directly referencing TEGRA_NR_GPIOS. This fixes a regression introduced by commit 6f168f2fa60f87e85e0df25e87e2372f22f5eb7c. ARM: tegra: harmony: initialize the TPS65862 PMIC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com>
2011-06-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) btrfs: fix uninitialized variable warning btrfs: add helper for fs_info->closing Btrfs: add mount -o inode_cache btrfs: scrub: add explicit plugging btrfs: use btrfs_ino to access inode number Btrfs: don't save the inode cache if we are deleting this root btrfs: false BUG_ON when degraded Btrfs: don't save the inode cache in non-FS roots Btrfs: make sure we don't overflow the free space cache crc page Btrfs: fix uninit variable in the delayed inode code btrfs: scrub: don't reuse bios and pages Btrfs: leave spinning on lookup and map the leaf Btrfs: check for duplicate entries in the free space cache Btrfs: don't try to allocate from a block group that doesn't have enough space Btrfs: don't always do readahead Btrfs: try not to sleep as much when doing slow caching Btrfs: kill BTRFS_I(inode)->block_group Btrfs: don't look at the extent buffer level 3 times in a row Btrfs: map the node block when looking for readahead targets Btrfs: set range_start to the right start in count_range_bits ...
2011-06-04hwmon: (max6642): Better chip detection schemaPer Dalén
Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: Per Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure
2011-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ...
2011-06-04btrfs: fix uninitialized variable warningDavid Sterba
With Linus' tree, today's linux-next build (powercp ppc64_defconfig) produced this warning: fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode': fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used uninitialized in this function Introduced by commit 16cdcec736cd ("btrfs: implement delayed inode items operation"). This fixes a bug in btrfs_update_inode(): if the returned value from btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not updated and several call paths may hit a BUG_ON or fail with strange code. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Sterba <dsterba@suse.cz>
2011-06-04btrfs: add helper for fs_info->closingDavid Sterba
wrap checking of filesystem 'closing' flag and fix a few missing memory barriers. Signed-off-by: David Sterba <dsterba@suse.cz>
2011-06-04Btrfs: add mount -o inode_cacheChris Mason
This makes the inode map cache default to off until we fix the overflow problem when the free space crcs don't fit inside a single page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04btrfs: scrub: add explicit pluggingArne Jansen
With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04btrfs: use btrfs_ino to access inode numberDavid Sterba
commit 4cb5300bc ("Btrfs: add mount -o auto_defrag") accesses inode number directly while it should use the helper with the new inode number allocator. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04Btrfs: don't save the inode cache if we are deleting this rootJosef Bacik
With xfstest 254 I can panic the box every time with the inode number caching stuff on. This is because we clean the inodes out when we delete the subvolume, but then we write out the inode cache which adds an inode to the subvolume inode tree, and then when it gets evicted again the root gets added back on the dead roots list and is deleted again, so we have a double free. To stop this from happening just return 0 if refs is 0 (and we're not the tree root since tree root always has refs of 0). With this fix 254 no longer panics. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04btrfs: false BUG_ON when degradedArne Jansen
In degraded mode the struct btrfs_device of missing devs don't have device->name set. A kstrdup of NULL correctly returns NULL. Don't BUG in this case. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04Btrfs: don't save the inode cache in non-FS rootsliubo
This adds extra checks to make sure the inode map we are caching really belongs to a FS root instead of a special relocation tree. It prevents crashes during balancing operations. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-25 23:11:40 +0000