summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-01-08ACPICA: delete utcache.cLen Brown
ACPI_USE_LOCAL_CACHE will never be defined by the Linux kernel, and thus utcache.c will always be dead code. Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-08ACPICA: delete acdisasm.hLen Brown
it is referenced only #ifdef ACPI_DISASSEMBLER, which is never set by the kernel. Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: Update version to 20081204.robert.moore@intel.com
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: FADT: Update error msgs for consistencyBob Moore
Update all messages so they look consistent. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: FADT: set acpi_gbl_use_default_register_widths to TRUE by defaultrobert.moore@intel.com
This returns the FADT support to the original behavior, which is to use default register widths. However, now check each register definition and report a warning if it differs from the default. This is a first step to moving away from the default widths, rather than outright believing the widths in all FADTs for all machines, considered rather dangerous until more data is obtained. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: FADT parsing changes and fixesBob Moore
1) Update the register lengths for the PM1 event blocks. The length must be divided by two in order to use these to access the status registers. 2) Add run-time option to use default register lengths to override a faulty FADT. 3) Add warning message if any of the X64 address structures contain a length that does not match the legacy length earlier in the FADT. 4) Move all FADT warning messages into the ValidateFadt function. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: Add ACPI_MUTEX_TYPE configuration optionBob Moore
Used to specify whether the OSL mutex interfaces should be used, or binary semaphores instead. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: Fixes for various ACPI data tablesBob Moore
Eliminate extraneous "zero length subtable" messages. Fix subtable output for ERST, MCFG, EINJ tables. Implement all subtables for HEST. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: Restructure includes into public/privateBob Moore
acpi.h now includes only the "public" acpica headers. All other acpica headers are "private" and should not be included by acpica users. One new file, accommon.h is used to include the commonly used private headers for acpica code generation. Future plans are to move all private headers to a new subdirectory. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: remove private acpica headers from driver filesLin Ming
External driver files should not include any private acpica headers. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: reboot.c: use new acpi_reset interfaceLin Ming
Use new acpi_reset interface to write to reset register Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: New: acpi_reset interface - write to reset registerBob Moore
Uses the FADT-defined reset register and reset value. Checks the FADT flags for the reset register supported bit. Supports reset register in memory or I/O space, but not in PCI config space since the host has the information to do it. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: Move all public H/W interfaces to new hwxfaceBob Moore
Move public interfaces from hwregs.c to new file, hwxface.c - similar to the structure of the other ACPICA components. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: New: acpi_read and acpi_write public interfacesBob Moore
Changed the acpi_hw_low_level_read and acpi_hw_low_level_write functions to the public acpi_read and acpi_write to allow direct access to ACPI registers. Removed the "width" parameter since the width can be obtained from the input GAS structure. Updated the FADT initialization to setup the GAS structures with the proper widths. Some widths are still hardcoded because many FADTs have incorrect register lengths. Signed-off-by: Bob Moore <robert.moore@intel.com Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: io_common.c: call acpi_get_table to avoid using ACPI_SIG_DSDTLin Ming
ACPI_SIG_DSDT is acpica internal used only. call acpi_get_table to avoid using ACPI_SIG_DSDT. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: io_acpi_init.c: call acpi_get_name to get node fullnameLin Ming
acpi_ns_print_node_pathname is internal used only use acpi_get_name instead to get node fullname Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: panasonic-laptop.c: remove ACPI_FUNCTION_TRACELin Ming
ACPI_FUNCTION_TRACE is an internal acpica function. remove ACPI_FUNCTION_TRACE from driver file Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: power.c: call acpi_get_name to get node nameLin Ming
acpi_ut_get_node_name is an internal acpica function. use acpi_get_name to get node ascii name Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: sony-laptop.c: call acpi_get_object_info to get node infoLin Ming
Avoid using internal acpica structures acpi_namespace_node and acpi_operand_object Call acpi_get_object_info to get node ascii name and method arg count Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: main.c: use new public GPE group enable/disable interfacesLin Ming
Avoid using internal functions: acpi_hw_disable_all_gpes and acpi_hw_enable_all_runtime_gpes Use new public GPE group enable/disable interfaces: acpi_disable_all_gpes and acpi_enable_all_runtime_gpes Also avoid using internal symbol ACPI_TABLE_INDEX_FACS, call acpi_get_table. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: New: Public GPE group enable/disable interfacesBob Moore
Added acpi_disable_all_gpes and acpi_enable_all_runtime_gpes for public use. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPICA: New: acpi_get_gpe_device interfaceBob Moore
This function maps an input GPE index to a GPE block device. Also Added acpi_current_gpe_count to track the current number of GPEs that are being managed by the ACPICA core (both FADT-based GPEs and the GPEs contained in GPE block devices.) Modify drivers/acpi/system.c to use these 2 new interfaces Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: wakeup.c: remove ACPI_FUNCTION_TRACELin Ming
ACPI_FUNCTION_TRACE is an internal acpica function. remove ACPI_FUNCTION_TRACE Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: proc.c: remove ACPI_FUNCTION_TRACELin Ming
ACPI_FUNCTION_TRACE and return_VALUE are internal acpica functions. remove ACPI_FUNCTION_TRACE replace return_VALUE with return Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: ec.c: call acpi_get_name to get node nameLin Ming
acpi_namespace_node is internal struct, it should not be used outside of ACPICA call acpi_get_name to get node ascii name Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: osl.c: replace return_ACPI_STATUS with returnLin Ming
return_ACPI_STATUS is an internal acpica function, replace it with return. acpi_gbl_permanent_mmap moved from acglobal.h to acpixf.h for external use Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Update version to 20081031Bob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Enhance implicit return mechanismLin Ming
For Windows compatibility, return an implicit integer of value zero for methods that have no executable code. A default implicit value of zero is provided for methods. Lin Ming. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Consolidate method arg count validation codeBob Moore
Merge the code that validates control method argument counts into the predefined validation module. Eliminates possible multiple warnings for incorrect counts. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Add Buffer->String conversion for predefined methodsBob Moore
For predefined methods (such as _BIF), add automatic conversion for objects that are required to be a String, but a Buffer was found instead. This can happen when reading string battery data from an operation region, because it used to be difficult to convert the data from buffer to string from within the ASL. Linux BZ 11822. http://bugzilla.kernel.org/show_bug.cgi?id=11822 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Allow multiple backslash prefix in namepathsLin Ming
In a fully qualified namepath, allow multiple backslash prefixes. This can happen because of the use of a double-backslash in strings (since backslash is the escape character) causing confusion. ACPICA BZ 739 Lin Ming. http://www.acpica.org/bugzilla/show_bug.cgi?id=739 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Fix to allow aliases within ASL namepathsBob Moore
Fixes a problem where the use of an alias within a namepath would result in a not found error or cause the compiler to fault. Also now allows forward references from the Alias operator itself. ACPICA BZ 738. http://www.acpica.org/bugzilla/show_bug.cgi?id=738 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Remove references to obsolete ACPI_DUMP_APPBob Moore
This define is no longer used. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Add support to externally execute _OSI methodBob Moore
The current implemenation of _OSI within ACPICA only allows other control methods to execute _OSI. This change allows the host OS to execute _OSI via the AcpiEvaluateObject interface. _OSI is a special method -- it does not exist in the AML code, it is implemented within ACPICA. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Reformat comments, no functional changesBob Moore
Reformat comments to use fewer lines. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Add global pointer for FACS table to simplify FACS accessBob Moore
Use a global pointer instead of using AcpiGetTableByIndex for each FACS access. This simplifies the code for the Global Lock and the Firmware Waking Vector(s). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Emit warning if two FACS or DSDT tables found in the FADTBob Moore
Checks if there are two valid but different addresses for the FACS and DSDT within the FADT (mismatch between the 32-bit and 64-bit fields.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Fix namestring for the SystemCMOS address spaceBob Moore
This fixes the name of this address space, changing it from the incorrect CMOS to the correct SystemCMOS. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Update debug output for IndexField I/OBob Moore
Split the "data register I/O" with more informative read and write messages. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Add a mechanism to escape infinite AML While() loopsBob Moore
Add a loop counter to force exit from AML While loops if the count becomes too large. This can occur in poorly written AML when the hardware does not respond within a while loop and the loop does not implement a timeout. The maximum loop count is configurable. A new exception code is returned when a loop is broken, AE_AML_INFINITE_LOOP. Bob Moore, Alexey Starikovskiy. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Optimize execution of AML While loopsBob Moore
Previously, a control state object was allocated and freed for each execution of the loop. The optimization is to simply reuse the control state for each iteration. This speeds up the raw loop execution time by about 5%. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Fix possible memory leak on error in parserLin Ming
Fixes a possible memory leak if an allocation failure happens in the parse loop. Must terminate an executing control method. Lin Ming, Bob Moore. ACPICA BZ 489. http://www.acpica.org/bugzilla/show_bug.cgi?id=489 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Update FACS waking vector interfacesBob Moore
Split AcpiSetFirmwareWakingVector into two: one for the 32-bit vector, another for the 64-bit vector. This is required because the host OS must setup the wake much differently for each vector (real vs. protected mode, etc.) and the interface should not be deciding which vector to use. Also eliminate the GetFirmwareWakingVector interface, as it served no purpose (only the firmware reads the vector, OS only writes the vector.) ACPICA BZ 731. http://www.acpica.org/bugzilla/show_bug.cgi?id=731 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-29ACPICA: Fix several warnings under gcc 4 compilerBob Moore
New compiler is pickier than older versions. Joerg Sonnenberger. From ACPICA BZ 732. http://www.acpica.org/bugzilla/show_bug.cgi?id=732 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-24Linux 2.6.28v2.6.28Linus Torvalds
Happy holidays..
2008-12-24Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well. V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204 V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking. V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support) V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button
2008-12-24Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable X86_PTRACE_BTS
2008-12-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing terminators in patch_sigmatel.c
2008-12-24ALSA: hda - Add missing terminators in patch_sigmatel.cHerton Ronaldo Krzesinski
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-24x86: disable X86_PTRACE_BTSIngo Molnar
there's a new ptrace arch level feature in .28: config X86_PTRACE_BTS bool "Branch Trace Store" it has broken fork() handling: the old DS area gets copied over into a new task without clearing it. Fixes exist but they came too late: c5dee61: x86, bts: memory accounting bf53de9: x86, bts: add fork and exit handling and are queued up for v2.6.29. This shows that the facility is still not tested well enough to release into a stable kernel - disable it for now and reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS facilities too - hopefully resulting in better code. Signed-off-by: Ingo Molnar <mingo@elte.hu>