summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-06-03ar9170: add AVM FRITZ devicesLuis R. Rodriguez
This adds: USB 0x057C:0x8401 AVM FRITZ!WLAN USB Stick N USB 0x057C:0x8402 AVM FRITZ!WLAN USB Stick N 2.4 These devices require the 1-stage firmware, if not present we don't continue. Cc: Peter Grabienski <Peter.Grabienski@Atheros.com> Cc: Stephen Chen <Stephen.Chen@Atheros.com> Cc: Michael Fortin <Michael.Fortin@Atheros.com> Cc: Johnny Cheng <Johnny.Cheng@Atheros.com> Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com> Cc: Joerg Albert <jal2@gmx.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ar9170: add support for 1-stage firmwareLuis R. Rodriguez
You can get the stage 1 firmware from here: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/ar9170.fw md5sum: 34feec4ec0eae3bb92c7c1ea2dfb4530 sha1sum: 6e5250498b815c2940d97242de31e054ae44e079 Its license: http://www.kernel.org/pub/linux/kernel/people/mcgrof/firmware/ar9170/LICENSE This is a new firmware, tested with WNDA3100. Cc: Peter Grabienski <Peter.Grabienski@Atheros.com> Cc: Stephen Chen <Stephen.Chen@Atheros.com> Cc: Michael Fortin <Michael.Fortin@Atheros.com> Cc: Johnny Cheng <Johnny.Cheng@Atheros.com> Cc: Yuan-Gu Wei <Yuan-Gu.Wei@atheros.com> Cc: Joerg Albert <jal2@gmx.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Add sanity check for beacon_int in adhoc/mesh caseJouni Malinen
It looks like mac80211 can request the driver to start beaconing with a beacon interval of zero in some cases (at least for mesh point). This does not sound correct and something may need to be fixed in mac80211. However, taken into account the unpleasantness of getting stuck in an infinite busy loop with rtnl_lock held, let's add a quick workaround in the driver to avoid the worst symptom while someone more familiar with the mesh implementation can figure out what should be done with mac80211 as far as beacon interval configuration is concerned. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath5k: remove conf->beacon_int usageBob Copeland
ieee80211_conf->beacon_int was deprecated and removed in a cleanup patch, however it was accidentally added back to ath5k in the change "ath5k: Allow user/driver to set txpower." Remove it once more, fixing the following warning: [13091.968902] WARNING: at drivers/net/wireless/ath/ath5k/base.c:2167 warn_slowpath_null+0x15/0x1a() [13091.968906] Hardware name: MacBook1,1 [13091.968909] Modules linked in: usb_storage fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy hid_apple arc4 ecb snd_seq_oss snd_seq_midi_event usbhid snd_seq ath5k mac80211 appletouch snd_seq_device snd_pcm_oss snd_mixer_oss sky2 snd_pcm ath processor cfg80211 snd_timer sg ohci1394 snd uhci_hcd bitrev ieee1394 joydev ehci_hcd crc32 snd_page_alloc button ac thermal battery sr_mod applesmc cdrom evdev input_polldev unix [last unloaded: microcode] [13091.968985] Pid: 2132, comm: phy0 Tainted: G W 2.6.30-rc5-wl #118 [13091.968988] Call Trace: [13091.968994] [<c0125884>] warn_slowpath_fmt+0x77/0xa6 [13091.969003] [<c03557d8>] ? _spin_unlock+0x2c/0x41 [13091.969008] [<c0355a56>] ? _spin_lock_irqsave+0x15/0x69 [13091.969012] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969019] [<c01445bb>] ? trace_hardirqs_off+0xb/0xd [13091.969024] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969029] [<c01445bb>] ? trace_hardirqs_off+0xb/0xd [13091.969034] [<c0355783>] ? _spin_unlock_irqrestore+0x34/0x5d [13091.969039] [<c01258c8>] warn_slowpath_null+0x15/0x1a [13091.969054] [<f965846d>] ath5k_beacon_update_timers+0x44/0x27f [ath5k] [13091.969059] [<c0126370>] ? vprintk+0x2dd/0x312 [13091.969063] [<c0125e50>] ? release_console_sem+0x1a6/0x1d3 [13091.969076] [<f96586c5>] ath5k_reset_tsf+0x1d/0x2c [ath5k] [13091.969095] [<f93f4426>] __ieee80211_sta_join_ibss+0x35/0x3aa [mac80211] [13091.969102] [<c0252793>] ? extract_entropy+0x47/0x8a [13091.969121] [<f93f4b21>] ieee80211_sta_find_ibss+0x2de/0x32f [mac80211] [13091.969126] [<c035422c>] ? mutex_lock_nested+0x28b/0x2a5 [13091.969145] [<f93f4b8e>] ? ieee80211_ibss_notify_scan_completed+0x1c/0x6f [mac80211] [13091.969164] [<f93f4bc9>] ieee80211_ibss_notify_scan_completed+0x57/0x6f [mac80211] [13091.969182] [<f93f26da>] ieee80211_scan_completed+0x31a/0x33f [mac80211] [13091.969201] [<f93f27ca>] ieee80211_scan_work+0xcb/0x18b [mac80211] [13091.969207] [<c0133a6a>] worker_thread+0x1b1/0x28e [13091.969212] [<c0133a25>] ? worker_thread+0x16c/0x28e [13091.969230] [<f93f26ff>] ? ieee80211_scan_work+0x0/0x18b [mac80211] [13091.969237] [<c013736e>] ? autoremove_wake_function+0x0/0x38 [13091.969242] [<c01338b9>] ? worker_thread+0x0/0x28e [13091.969246] [<c0137031>] kthread+0x4a/0x70 [13091.971460] [<c0136fe7>] ? kthread+0x0/0x70 [13091.971467] [<c0103527>] kernel_thread_helper+0x7/0x10 [13091.971470] ---[ end trace 8defaa5d15c50cef ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: handle -EALREADY on cfg80211 op assoc reqLuis R. Rodriguez
When the SME requests to associate to an open AP ieee80211_sta_set_extra_ie() can be called with zero IE length. When this happens or when the extra IE has already been set -EALREADY is passed down and the supplicant will complain that the operation is already in progress and it will not let us associate. We correct this by treating -EALREADY from ieee80211_sta_set_extra_ie() as a success just as we do for wext. Cc: Shan.Palanisamy@Atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03wireless: libertas: fix unaligned accessesCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Add "debug" file to debugfsJeff Hansen
This patch adds the debug file to the ath9k debugfs, which lets you modify the debug_mask at runtime, without having to reload the ath9k module. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Combine legacy and 11n rc statisticsJeff Hansen
This patch combines the legacy and 11n rcstats into one, using the normal rate table indices instead of two separate indices for each mode. Legacy rates also get all of the PER and retry information, now, too. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath9k: Reset SC_OP_TSF_RESET flag after stuck beaconJeff Hansen
I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beacon gets stuck maybe once a day. After Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k would nearly re-configure the beacons after it detected the stuck beacon, and did a reset. But it would fail the SC_OP_TSF_RESET check in ath_beacon_config_ap. This patch gets the beacon fully reconfigured after the reset. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: disallow interfering with stations on non-AP (part 2)Johannes Berg
On non-AP interfaces userspace has no business interfering with the station management, this can confuse mac80211 (and other drivers probably wouldn't support it anyway). Allow adding and removing stations only on AP interfaces. (Reconcile this w/ previous version of patch posted with same subject... -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: fix transposed min/max CW valuesJohannes Berg
I accidentally transposed these in the patch that "fixed" the defaults, leading to extremely low throughput because of the huge min CW. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwmc3200wifi: fix printk formatRandy Dunlap
Fix printk format for size_t variable: drivers/net/wireless/iwmc3200wifi/fw.c:75: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: ilw@linux.intel.com Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwmc3200wifi: fix fragmentation threshold settingSamuel Ortiz
We were sending the fragmentation threshold value to the wrong table, causing an LMAC assert when setting it from wext. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: avoid build warning in iwl-core.Rami Rosen
When building when CONFIG_IWLWIFI_DEBUG is not set, we get the following warning: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c: In function ‘iwl_isr’: /work/src/w/drivers/net/wireless/iwlwifi/iwl-core.c:1707: warning: unused variable ‘inta_fh’ This patch avoids this warning by adding #ifdef CONFIG_IWLWIFI_DEBUG before the declaration of inta_fh in iwl_isr() in drivers/net/wireless/iwlwifi/iwl-core.c Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: use key size constantsJohannes Berg
Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03nl80211: bounce scan request back to userspaceJohannes Berg
When a scan finishes only the program that asked for it knows what kind of scan it was; let's tell everybody else about the scan parameters as well so they can evaluate the result of the scan better. Also helps with debugging. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: validate AID of stations being addedJohannes Berg
We have some validation code in mac80211 but said code will force an invalid AID to 0 which isn't a valid AID either; instead require a valid AID (1-2007) to be passed in from userspace in cfg80211 already. Also move the code before the race comment since it can only be executed during STA addition and thus is not racy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rt2x00: Remove last usage of beacon_int from ieee80211_configIvo van Doorn
This removes the last usage of beacon_int inside the iee80211_config structure from rt2x00. The attempt is a bit hackish, and subject to change in the future when the entire rt2x00_dev structure is cleaned up and restructured. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03mac80211: deprecate conf.beacon_int properlyJohannes Berg
Ivo has updated the driver to no longer use the change flag, so we can remove that, but rt2x00 and ath5k still use the actual value so let's mark it as deprecated too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: fix WPA adhoc network creationDan Williams
Oddly enough, the firmware's JOIN/START commands don't appear to have any facility for setting custom IEs, thus the started adhoc network doesn't advertise its WPA capability in the beacon. Whee! Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: convert CMD_802_11_ASSOCIATE to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: convert CMD_802_11_AUTHENTICATE to a direct commandDan Williams
And fix up setting authentication suite for v9+ firmware too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: restyle Marvell & IEEE TLV structure namesDan Williams
Easier to read and more conformant with kernel style. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03libertas: simplify and clean up association/start/join setupDan Williams
Some of the parameters for association/join/start commands aren't used (like the FH and CF IEs for IBSS, and the FH IE for BSS), so get rid of their unions to reduce indirection. Also clean up structure names for kernel style. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: fix otp access initReinette Chatre
Polling function returns positive time if polling was needed to read value. This is still success. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03iwlwifi: fix merge errorReinette Chatre
This hunk of code was removed in patch "iwlwifi: do not cancel delayed work inside spin_lock_irqsave" submitted at http://marc.info/?l=linux-wireless&m=124267503030042&w=2 This same patch in this repo does not remove this hunk. Remove it here. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rt2x00: Add new rt2800usb USB ID'sIvo van Doorn
new patch to add more usb_dev to rt2800usb.c . IDs 'stolen' from the latest Ralink linux driver(2009_0520_RT3070_Linux_STA_v2.1.1.0.tar.gz) Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03net/libertas: make SPI interface big endian awareSebastian Andrzej Siewior
The comment (which I remove) says that the translation is done SPI routines. IMHO this can't work because the SPI driver does not know whether the incomming bytes are part of the registers/bytes which need to be flipped or part of packet data which has to remain untouched. While adding le helpers I also removed spu_write_u32() which has no users. Tested-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03ath5k: avoid leaking mutex in ath5k_configJohn W. Linville
Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03net/ucc_geth: Add SGMII support for UEC GETH driverHaiying Wang
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03fsl_pq_mido: Set the first UCC as the mii management interface masterHaiying Wang
Current code makes the UCC whose register range includes the current mdio register to be the MII managemnt interface master of the QE. If there is more than one mdio bus for QE, the UCC of the last mdio bus will be the MII management interface master which will make the primary mdio bus working unproperly, e.g. can not get the right clock. Normally the primary mdio bus is the first UEC's mdio bus. This patch allows the first UCC to be the MII management interface master of the multiple UCC mdio buses. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net/phy/marvell: update m88e1111 support for SGMII modeHaiying Wang
Disable fiber/copper auto selection for Marvell m88e1111 SGMII support. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb cleanupEric Dumazet
Can remove anonymous union now it has one field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->dst accessorsEric Dumazet
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->rtable accessorEric Dumazet
Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb Delete skb->rtable field Setting rtable is not allowed, just set dst instead as rtable is an alias. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: add _skb_dst opaque fieldEric Dumazet
struct sk_buff uses one union to define dst and rtable fields. We want to replace direct access to these pointers by accessors. First patch adds a new "unsigned long _skb_dst;" opaque field in this union. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: bump the version numberBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: workaround a Tx hang on 82577/82578Bruce Allan
With bi-directional stress traffic, the receiver could hang causing the hardware to stop and a "Detected Tx Unit Hang" message dumped to the system logfile. Temporarily workaround this issue by disabling Tx flow control by default. The issue is currently being investigated and a follow-on patch will be provided to revert this when it is resolved. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: add support for 82577/82578 GbE LOM partsBruce Allan
This patch provides support for the next generation Intel desktop and mobile gigabit ethernet LOM adapters. These adapters are the follow-on parts to the LOMs tied to the prior ICH chipsets and are comprised of a MAC in the PCH chipset and an external PHY (82577 for mobile and 82578 for desktop versions). New features consist of PHY wakeup to save power by completely turning off the MAC while in Sx state, and 4K jumbo frames. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: specify max supported frame size in adapter structBruce Allan
By putting the maximum frame size supported by the hardware into the adapter structure, the change_mtu entry point function can be cleaned up of checks for all the different max frame sizes supported by Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: correct flow control thresholdsBruce Allan
The flow control thresholds, i.e. high and low watermarks of the Rx FIFO for when the hardware should transmit PAUSE frames (XON and XOFF, respectively), need to be tuned for more efficient use of the FIFO. The logic to set the thresholds for parts that support early-receive (ERT) was also wrong in that it should check whether jumbo frames are in use. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: do not attempt to disable smart powerdown if not supportedBruce Allan
During reset, the driver was attempting to disable the Smart Powerdown feature even if the part does not support Smart Powerdown. Check for support before attempting to disable the feature. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03e1000e: enable CRC stripping by defaultBruce Allan
CRC stripping should be enabled by default but was not if it was not specified as a module parameter. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/forcedeth.c
2009-06-02mlx4_en: Updated driver versionYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Added vlan_features supportYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: multiqueue supportYevgeny Petrilin
By default the driver opens 8 TX queues (defined by MLX4_EN_NUM_TX_RINGS). If the driver is configured to support Per Priority Flow Control, we open 8 additional TX rings. dev->real_num_tx_queues is always set to be MLX4_EN_NUM_TX_RINGS. The mlx4_en_select_queue() function uses standard hashing (skb_tx_hash) in case that PPFC is not supported or the skb contain a vlan tag, otherwise the queue is selected according to vlan priority. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Coalescing target is equal for all mtu'sYevgeny Petrilin
The interrupt moderation should not depend on number of incoming bytes, but on number of incoming packets. The previous scheme caused very high interrupts rate for small messages when big MTU was configured. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Work with part of the ports.Yevgeny Petrilin
If the initialization of one of the ports failed, there is no need to fail the other one as well. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en renamed en_params.c to en_ethtool.cYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 09:17:01 +0000