summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-09-19drm/ttm: fix the tt_populated check in ttm_tt_destroy()Ben Skeggs
After a vmalloc failure in ttm_dma_tt_alloc_page_directory(), ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up inside the driver's unpopulate() hook when populate() has never yet been called. On nouveau, the first issue to be hit because of this is that dma_address[] may be a NULL pointer. After working around this, ttm_pool_unpopulate() may potentially hit the same issue with the pages[] array. It seems to make more sense to avoid calling unpopulate on already unpopulated TTMs than to add checks to all the implementations. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes A couple of bios parser fixes (one for ancient chips, another for new ones - important in Optimus configs). Another to make sure KMS is enabled on certain Optimus configs, and a TTM failure path fix. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM drm/nouveau/kms: enable for non-vga pci classes drm/nouveau/bios/init: stub opcode 0xaa
2013-09-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "atomic_open-related fixes (Miklos' series, with EEXIST-related parts replaced with fix in fs/namei.c:atomic_open() instead of messing with the instances) + race fix in autofs + leak on failure exit in 9p" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: don't forget to destroy inode cache if fscache registration fails atomic_open: take care of EEXIST in no-open case with O_CREAT|O_EXCL in fs/namei.c vfs: don't set FILE_CREATED before calling ->atomic_open() nfs: set FILE_CREATED gfs2: set FILE_CREATED cifs: fix filp leak in cifs_atomic_open() vfs: improve i_op->atomic_open() documentation autofs4: close the races around autofs4_notify_daemon()
2013-09-19MIPS: PCI: Use pci_resource_to_user to map pci memory space properlyWolfgang Grandegger
[ralf@linux-mips.org: This only matters to Alchemy platforms. On other platforms fixup_bigphys_addr is just an identidy mapping.] Signed-off-by: Wolfgang Grandegger <wg@denx.de> Cc: tiejun.chen <tiejun.chen@windriver.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18Merge tag 'omap-for-v3.12/fixes-dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, OMAP DT fixes for 3.12-rc1: OMAP device tree changes that are needed to fix regressions and avoid electrical issues on beaglebone black. Via Benoit Cousson <bcousson@baylibre.com>: Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset * tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18Merge tag 'omap-for-v3.12/fixes-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, fixes for 3.12-rc1: OMAP fixes for build warnings and cpuidle, and a few trivial typo fixes. * tag 'omap-for-v3.12/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18Merge tag 'for_3.12-rc2/dts_signed' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.12/fixes-dt Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset
2013-09-18ipvs: stats should not depend on CPU 0Julian Anastasov
When reading percpu stats we need to properly reset the sum when CPU 0 is not present in the possible mask. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-09-18ipvs: do not use dest after ip_vs_dest_put in LBLCRJulian Anastasov
commit c5549571f975ab ("ipvs: convert lblcr scheduler to rcu") allows RCU readers to use dest after calling ip_vs_dest_put(). In the corner case it can race with ip_vs_dest_trash_expire() which can release the dest while it is being returned to the RCU readers as scheduling result. To fix the problem do not allow e->dest to be replaced and defer the ip_vs_dest_put() call by using RCU callback. Now e->dest does not need to be RCU pointer. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-09-18ipvs: do not use dest after ip_vs_dest_put in LBLCJulian Anastasov
commit c2a4ffb70eef39 ("ipvs: convert lblc scheduler to rcu") allows RCU readers to use dest after calling ip_vs_dest_put(). In the corner case it can race with ip_vs_dest_trash_expire() which can release the dest while it is being returned to the RCU readers as scheduling result. To fix the problem do not allow en->dest to be replaced and defer the ip_vs_dest_put() call by using RCU callback. Now en->dest does not need to be RCU pointer. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-09-18ipvs: make the service replacement more robustJulian Anastasov
commit 578bc3ef1e473a ("ipvs: reorganize dest trash") added IP_VS_DEST_STATE_REMOVING flag and RCU callback named ip_vs_dest_wait_readers() to keep dests and services after removal for at least a RCU grace period. But we have the following corner cases: - we can not reuse the same dest if its service is removed while IP_VS_DEST_STATE_REMOVING is still set because another dest removal in the first grace period can not extend this period. It can happen when ipvsadm -C && ipvsadm -R is used. - dest->svc can be replaced but ip_vs_in_stats() and ip_vs_out_stats() have no explicit read memory barriers when accessing dest->svc. It can happen that dest->svc was just freed (replaced) while we use it to update the stats. We solve the problems as follows: - IP_VS_DEST_STATE_REMOVING is removed and we ensure a fixed idle period for the dest (IP_VS_DEST_TRASH_PERIOD). idle_start will remember when for first time after deletion we noticed dest->refcnt=0. Later, the connections can grab a reference while in RCU grace period but if refcnt becomes 0 we can safely free the dest and its svc. - dest->svc becomes RCU pointer. As result, we add explicit RCU locking in ip_vs_in_stats() and ip_vs_out_stats(). - __ip_vs_unbind_svc is renamed to __ip_vs_svc_put(), it now can free the service immediately or after a RCU grace period. dest->svc is not set to NULL anymore. As result, unlinked dests and their services are freed always after IP_VS_DEST_TRASH_PERIOD period, unused services are freed after a RCU grace period. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-09-18ipvs: fix overflow on dest weight multiplySimon Kirby
Schedulers such as lblc and lblcr require the weight to be as high as the maximum number of active connections. In commit b552f7e3a9524abcbcdf ("ipvs: unify the formula to estimate the overhead of processing connections"), the consideration of inactconns and activeconns was cleaned up to always count activeconns as 256 times more important than inactconns. In cases where 3000 or more connections are expected, a weight of 3000 * 256 * 3000 connections overflows the 32-bit signed result used to determine if rescheduling is required. On amd64, this merely changes the multiply and comparison instructions to 64-bit. On x86, a 64-bit result is already present from imull, so only a few more comparison instructions are emitted. Signed-off-by: Simon Kirby <sim@hostway.ca> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-09-18ARM: multi_v7: add HREFv60 to multi_v7 defconfigLinus Walleij
This is just a standard board for the Ux500, include it in the v7 multiplatform defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18ARM: OMAP2+: mux: fix trivial typo in namePhil Carmody
Fix trivial typo in name. Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4 SMP: Corrected a typo fucntions to functionsAnoop Thomas Mathew
Corrected the functions spelling mistake in the OMAP4 SMP source file. Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionallyVladimir Murzin
We call cpu_cluster_pm_enter for dev->cpu == 0 only, but cpu_cluster_pm_exit called without that check. Because of that unhandled page fault may happen: [ 3.803405] Unable to handle kernel paging request at virtual address 00002500 [ 3.810974] pgd = c0004000 [ 3.813812] [00002500] *pgd=00000000 [ 3.817596] Internal error: Oops: 5 [#1] SMP ARM [ 3.822418] Modules linked in: [ 3.825653] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc6+ #21 [ 3.832397] task: ed86ef40 ti: ed896000 task.ti: ed896000 [ 3.838073] PC is at irq_notifier+0x234/0x25c [ 3.842651] LR is at irq_notifier+0x218/0x25c [ 3.847229] pc : [<c0029ed8>] lr : [<c0029ebc>] psr: 80000193 [ 3.847229] sp : ed897ee8 ip : 00000005 fp : 00000001 [ 3.859283] r10: c0b395f0 r9 : c0b30594 r8 : c0b8c2ac [ 3.864776] r7 : ffffffff r6 : 00000000 r5 : 00000005 r4 : 00000000 [ 3.871643] r3 : 00002500 r2 : 00000000 r1 : 00000005 r0 : 44302244 [ 3.878479] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.886260] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 3.892272] Process swapper/1 (pid: 0, stack limit = 0xed896240) [ 3.898590] Stack: (0xed897ee8 to 0xed898000) [ 3.903167] 7ee0: c0979c3a 00000001 ed897ef8 ed896000 c0014f7c 00000000 [ 3.911743] 7f00: 00000005 00000000 ffffffff c0b8c2ac c0b395f0 c077c04c c0c94b48 c0b3953c [ 3.920318] 7f20: c0bcd928 00000002 c0b39524 c00cfad8 00000000 ffffffff 00000000 c00cfb10 [ 3.928924] 7f40: c14e62c0 c002c1c8 c002c0ac c14e62c0 00000002 e251c37d 00000000 c0b39548 [ 3.937499] 7f60: c0b395f0 c05a1bc4 e251c37d 00000000 00000005 c05a3870 edc90380 edc90380 [ 3.946105] 7f80: edc90394 c14e62c0 c0b39548 00000002 c0784064 c05a3c78 c0b395e0 c14e62c0 [ 3.954681] 7fa0: 00000002 c0b39548 c0bc9db8 00000000 00000001 c05a1dc0 ed896000 00000015 [ 3.963287] 7fc0: c0bc9db8 ed896000 8000406a c0b30594 c0784064 c000e504 00000746 c007a528 [ 3.971862] 7fe0: 00000001 0000001d 600001d3 c0bcc004 00000000 800086c4 ee0aa6a7 d2aabaa9 [ 3.980499] [<c0029ed8>] (irq_notifier+0x234/0x25c) from [<c077c04c>] (notifier_call_chain+0x38/0x68) [ 3.990173] [<c077c04c>] (notifier_call_chain+0x38/0x68) from [<c00cfad8>] (cpu_pm_notify+0x20/0x38) [ 3.999786] [<c00cfad8>] (cpu_pm_notify+0x20/0x38) from [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) [ 4.009399] [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) from [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) [ 4.020111] [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) from [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) [ 4.030822] [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) from [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) [ 4.041870] [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) from [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) [ 4.052947] [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) from [<c000e504>] (arch_cpu_idle+0x8/0x38) [ 4.062499] [<c000e504>] (arch_cpu_idle+0x8/0x38) from [<c007a528>] (cpu_startup_entry+0x178/0x1e4) [ 4.071990] [<c007a528>] (cpu_startup_entry+0x178/0x1e4) from [<800086c4>] (0x800086c4) [ 4.080383] Code: e5922288 03a03b0a 13a03c25 e0823003 (e5932000) [ 4.086791] ---[ end trace d83954a84a6fa69e ]--- It is supposed that sar_base is initialized in irq_save_context, which is called on CPU_CLUSTER_PM_ENTER notification. If this notification has been missed and CPU_CLUSTER_PM_EXIT is received sar_base is NULL. Fix it by calling CPU_CLUSTER_PM_{ENTER,EXIT} under the same condition. Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18mailbox: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=yFabio Estevam
When CONFIG_ARM_LPAE=y the following build warning is generated: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] According to Documentation/printk-formats.txt '%pa' can be used to properly print 'resource_size_t'. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP: fix return value check in omap_device_build_from_dt()Wei Yongjun
In case of error, the function omap_device_alloc() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4: Fix clock_get error for GPMC during bootTony Lindgren
Looks like we still have the legacy clock alias name for omap4 GPMC (General Purpose Memory Controller), so let's fix it for the device tree naming. There's no need to keep the legacy naming as omap4 is DT only nowadays. Without this fix we get the following error while booting: [ 0.440399] omap-gpmc 50000000.gpmc: error: clk_get Reported-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.11 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18iio: iio_device_add_event_sysfs() bugfixLukasz Czerwinski
Fix mask generation for modified channels. Signed-off-by: Lukasz Czerwinski <l.czerwinski@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18staging: iio: ade7854-spi: Fix return valueSachin Kamat
ade7854_probe can fail. Return the value obtained from it instead of 0 (success). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Barry Song <21cnbao@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18staging:iio:hmc5843: Fix measurement conversionPeter Meerwald
recently broken, cd6fe06588423ff4cca85c85c4402027b04dccf1 staging:iio:hmc5843: Use i2c_smbus_read_word_swapped() Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18iio: isl29018: Fix uninitialized valueDerek Basehore
The lux_uscale value is not initialized at probe. The value will be uninitialized unless a value is written to it through the iio channel interface. This fixes that. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65998 Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular ↵Jonathan Cameron
and buffer enabled for built in dummy driver. This only occurs in the unlikely event that the example driver is built in whilst the buffer implementation is not. Solved by switching from a depends on to a select for this particular case. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18iio: at91: fix adc_clk overflowJosh Wu
The adc_clk variable is currently defined using a 32-bits unsigned integer, which will overflow under some very valid range of operations. Such overflow will occur if, for example, the parent clock is set to a 20MHz frequency and the ADC startup time is larger than 215ns. To fix this, introduce an intermediate variable holding the clock rate in kHz. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-18dm stats: fix possible counter corruption on 32-bit systemsMikulas Patocka
There was a deliberate race condition in dm_stat_for_entry() to avoid the overhead of disabling and enabling interrupts. The race could result in some events not being counted on 64-bit architectures. However, on 32-bit architectures, operations on long long variables are not atomic, so the race condition could cause the counter to jump by 2^32. Such jumps could be disruptive, so we need to do proper locking on 32-bit architectures. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Alasdair G. Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-09-18dm mpath: do not fail path on -ENOSPCJun'ichi Nomura
Since ENOSPC is a target-side error, dm-mpath should just pass the error information to upper layer instead of retrying itself with path failover. Otherwise it will end up failing all paths down while path checkers find all paths ok. ENOSPC can now be returned from SCSI device after commit a9d6ceb8 ("[SCSI] return ENOSPC on thin provisioning failure"). Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-09-18MIPS: 74K/1074K: Correct erratum workaround.Maciej W. Rozycki
Make sure 74K revision numbers are not applied to the 1074K. Also catch invalid usage. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18MIPS: Cleanup CP0 PRId and CP1 FPIR register access masksMaciej W. Rozycki
Replace hardcoded CP0 PRId and CP1 FPIR register access masks throughout. The change does not touch places that use shifted or partial masks. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18Merge tag 'please-pull-pstore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore/compression fixes from Tony Luck: "Three pstore fixes related to compression: 1) Better adjustment of size of compression buffer (was too big for EFIVARS backend resulting in compression failure 2) Use zlib_inflateInit2 instead of zlib_inflateInit 3) Don't print messages about compression failure. They will waste space that may better be used to log console output leading to the crash" * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: Remove the messages related to compression failure pstore: Use zlib_inflateInit2 instead of zlib_inflateInit pstore: Adjust buffer size for compression for smaller registered buffers
2013-09-18Bluetooth: Fix rfkill functionality during the HCI setup stageJohan Hedberg
We need to let the setup stage complete cleanly even when the HCI device is rfkilled. Otherwise the HCI device will stay in an undefined state and never get notified to user space through mgmt (even when it gets unblocked through rfkill). This patch makes sure that hci_dev_open() can be called in the HCI_SETUP stage, that blocking the device doesn't abort the setup stage, and that the device gets proper powered down as soon as the setup stage completes in case it was blocked meanwhile. The bug that this patch fixed can be very easily reproduced using e.g. the rfkill command line too. By running "rfkill block all" before inserting a Bluetooth dongle the resulting HCI device goes into a state where it is never announced over mgmt, not even when "rfkill unblock all" is run. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-18Bluetooth: Introduce a new HCI_RFKILLED flagJohan Hedberg
This makes it more convenient to check for rfkill (no need to check for dev->rfkill before calling rfkill_blocked()) and also avoids potential races if the RFKILL state needs to be checked from within the rfkill callback. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-18ARM: mvebu: Add clock properties to Armada XP timer nodeEzequiel Garcia
With the addition of the Armada XP reference clock, we can now model accurately the available clock inputs for the timer: namely, nbclk and refclk. For each of this clock inputs we assign a name, for the driver to select as appropriate. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-18ARM: mvebu: Add the reference 25 MHz fixed-clock to Armada XPEzequiel Garcia
The Armada XP SoC has a reference 25 MHz fixed-clock that is used in some controllers such as the timer and the watchdog. This commit adds a DT representation of this clock through a fixed-clock compatible node. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-18ARM: Kirkwood: Add missing DT reg property to cpu@0Andrew Lunn
The kirkwood.dtsi cpu@0 node is missing the mandatory reg property. This causes of_get_cpu_node() to fail to find the node and as a result the cpufreq driver fails in its probe function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-18bus: mvebu: add missing of_node_put() to fix reference leakJisheng Zhang
Add of_node_put to properly decrement the refcount when we are done using a given node. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Conflicts: drivers/bus/mvebu-mbus.c
2013-09-18ARM: mvebu: add missing of_node_put() to fix reference leakJisheng Zhang
Add of_node_put to properly decrement the refcount when we are done using a given node. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Conflicts: arch/arm/mach-mvebu/armada-370-xp.c arch/arm/mach-mvebu/platsmp.c
2013-09-18MIPS: Remove useless comment about kprobe from arch/mips/MakefileWu Zhangjin
The commit c1bf207d6ee1eb72e9c10365edbdc7c9ff7fb9b0 (kernel.org) rsp. 58e9ad32a48dce37ffeea912f55bd1c94b85ad7f (lmo) [MIPS: kprobe: Add support] introduced a useless comment. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1765/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18net:dccp: do not report ICMP redirects to user spaceDuan Jiong
DCCP shouldn't be setting sk_err on redirects as it isn't an error condition. it should be doing exactly what tcp is doing and leaving the error handler without touching the socket. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/lpss: Add pin control support to Intel low power subsystem perf/x86/intel: Mark MEM_LOAD_UOPS_MISS_RETIRED as precise on SNB x86: Remove now-unused save_rest() x86/smpboot: Fix announce_cpu() to printk() the last "OK" properly
2013-09-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "An NTP related lockup fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix HRTICK related deadlock from ntp lock changes
2013-09-18cnic: Fix crash in cnic_bnx2x_service_kcq()Michael Chan
commit 104a43edb264321a4d41850e98153b4fa8a9ef42 cnic: Use CHIP_NUM macros from bnx2x.h changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE is supported or not. There is another place in cnic that is still using the old method to determine if FCoE is supported or not. The 2 methods may not yield the same result after the network interface is brought down and up. This will cause the crash as cnic_bnx2x_service_kcq() will access the uninitialized cp->kcq2. The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code to remove the old method as it is no longer needed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.Michael Chan
commit b9871bcfd211d316adee317608dab44c58d6ea2d bnx2x: VF RSS support - PF side changed the configuration of the doorbell HW and it broke iSCSI and FCoE. We fix this by making compatible changes to the doorbell address in bnx2i and bnx2fc. For the userspace driver, we need to pass a modified CID so that the existing userspace driver will calculate the correct doorbell address and continue to work. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix comment for sched_info_depart sched/Documentation: Update sched-design-CFS.txt documentation sched/debug: Take PID namespace into account sched/fair: Fix small race where child->se.parent,cfs_rq might point to invalid ones
2013-09-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two small fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix UAPI export of PERF_EVENT_IOC_ID perf/x86/intel: Fix Silvermont offcore masks
2013-09-18Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included change: - fix the Bridge Loop Avoidance component by marking the variables containing the VLAN ID with the HAS_TAG flag when needed.
2013-09-18cifs: stop trying to use virtual circuitsJeff Layton
Currently, we try to ensure that we use vcnum of 0 on the first established session on a connection and then try to use a different vcnum on each session after that. This is a little odd, since there's no real reason to use a different vcnum for each SMB session. I can only assume there was some confusion between SMB sessions and VCs. That's somewhat understandable since they both get created during SESSION_SETUP, but the documentation indicates that they are really orthogonal. The comment on max_vcs in particular looks quite misguided. An SMB session is already uniquely identified by the SMB UID value -- there's no need to again uniquely ID with a VC. Furthermore, a vcnum of 0 is a cue to the server that it should release any resources that were previously held by the client. This sounds like a good thing, until you consider that: a) it totally ignores the fact that other programs on the box (e.g. smbclient) might have connections established to the server. Using a vcnum of 0 causes them to get kicked off. b) it causes problems with NAT. If several clients are connected to the same server via the same NAT'ed address, whenever one connects to the server it kicks off all the others, which then reconnect and kick off the first one...ad nauseum. I don't see any reason to ignore the advice in "Implementing CIFS" which has a comprehensive treatment of virtual circuits. In there, it states "...and contrary to the specs the client should always use a VcNumber of one, never zero." Have the client just use a hardcoded vcnum of 1, and stop abusing the special behavior of vcnum 0. Reported-by: Sauron99@gmx.de <sauron99@gmx.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Volker Lendecke <vl@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-18ARM: sa1100: collie.c: fall back to jedec_probe flash detectionAndrea Adami
Zaurus collie contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16) and at the moment cfi will not detect the collie NOR. In the meanwhile we can revert to the jedec-probe map which has been fixed with following commit: mtd: jedec_probe: fix LH28F640BF definition fe2f4c8e0bf2756b670ee78fa9772613a2ea8495 Somehow this is unsatisfactory because the flash is mounted READ ONLY (as from factory, with a RO cramfs) Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18RPCSEC_GSS: fix crash on destroying gss authJ. Bruce Fields
This fixes a regression since eb6dc19d8e72ce3a957af5511d20c0db0a8bd007 "RPCSEC_GSS: Share all credential caches on a per-transport basis" which could cause an occasional oops in the nfsd code (see below). The problem was that an auth was left referencing a client that had been freed. To avoid this we need to ensure that auths are shared only between descendants of a common client; the fact that a clone of an rpc_client takes a reference on its parent then ensures that the parent client will last as long as the auth. Also add a comment explaining what I think was the intention of this code. general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: rpcsec_gss_krb5 nfsd auth_rpcgss oid_registry nfs_acl lockd sunrpc CPU: 3 PID: 4071 Comm: kworker/u8:2 Not tainted 3.11.0-rc2-00182-g025145f #1665 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: nfsd4_callbacks nfsd4_do_callback_rpc [nfsd] task: ffff88003e206080 ti: ffff88003c384000 task.ti: ffff88003c384000 RIP: 0010:[<ffffffffa00001f3>] [<ffffffffa00001f3>] rpc_net_ns+0x53/0x70 [sunrpc] RSP: 0000:ffff88003c385ab8 EFLAGS: 00010246 RAX: 6b6b6b6b6b6b6b6b RBX: ffff88003af9a800 RCX: 0000000000000002 RDX: ffffffffa00001a5 RSI: 0000000000000001 RDI: ffffffff81e284e0 RBP: ffff88003c385ad8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000015 R12: ffff88003c990840 R13: ffff88003c990878 R14: ffff88003c385ba8 R15: ffff88003e206080 FS: 0000000000000000(0000) GS:ffff88003fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fcdf737e000 CR3: 000000003ad2b000 CR4: 00000000000006e0 Stack: ffffffffa00001a5 0000000000000006 0000000000000006 ffff88003af9a800 ffff88003c385b08 ffffffffa00d52a4 ffff88003c385ba8 ffff88003c751bd8 ffff88003c751bc0 ffff88003e113600 ffff88003c385b18 ffffffffa00d530c Call Trace: [<ffffffffa00001a5>] ? rpc_net_ns+0x5/0x70 [sunrpc] [<ffffffffa00d52a4>] __gss_pipe_release+0x54/0x90 [auth_rpcgss] [<ffffffffa00d530c>] gss_pipe_free+0x2c/0x30 [auth_rpcgss] [<ffffffffa00d678b>] gss_destroy+0x9b/0xf0 [auth_rpcgss] [<ffffffffa000de63>] rpcauth_release+0x23/0x30 [sunrpc] [<ffffffffa0001e81>] rpc_release_client+0x51/0xb0 [sunrpc] [<ffffffffa00020d5>] rpc_shutdown_client+0xe5/0x170 [sunrpc] [<ffffffff81098a14>] ? cpuacct_charge+0xa4/0xb0 [<ffffffff81098975>] ? cpuacct_charge+0x5/0xb0 [<ffffffffa019556f>] nfsd4_process_cb_update.isra.17+0x2f/0x210 [nfsd] [<ffffffff819a4ac0>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff819a4acb>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff810703ab>] ? process_one_work+0x15b/0x510 [<ffffffffa01957dd>] nfsd4_do_callback_rpc+0x8d/0xa0 [nfsd] [<ffffffff8107041e>] process_one_work+0x1ce/0x510 [<ffffffff810703ab>] ? process_one_work+0x15b/0x510 [<ffffffff810712ab>] worker_thread+0x11b/0x370 [<ffffffff81071190>] ? manage_workers.isra.24+0x2b0/0x2b0 [<ffffffff8107854b>] kthread+0xdb/0xe0 [<ffffffff819a4ac0>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81078470>] ? __init_kthread_worker+0x70/0x70 [<ffffffff819ac7dc>] ret_from_fork+0x7c/0xb0 [<ffffffff81078470>] ? __init_kthread_worker+0x70/0x70 Code: a5 01 00 a0 31 d2 31 f6 48 c7 c7 e0 84 e2 81 e8 f4 91 0a e1 48 8b 43 60 48 c7 c2 a5 01 00 a0 be 01 00 00 00 48 c7 c7 e0 84 e2 81 <48> 8b 98 10 07 00 00 e8 91 8f 0a e1 e8 +3c 4e 07 e1 48 83 c4 18 RIP [<ffffffffa00001f3>] rpc_net_ns+0x53/0x70 [sunrpc] RSP <ffff88003c385ab8> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>