summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-09-17usb: gadget: f_mass_storage: reset endpoint driver data when disabledPeter Oh
Gadgets endpoint driver data is a criteria to judge that whether the endpoints are in use or not. When gadget gets assigned an endpoint from endpoint list, they check its driver data if the driver data is NULL. If the driver data is not NULL then they regard it as in use. Therefore all of gadgets should reset their endpoints driver data to NULL as they are disabled. Otherwise it causes a leak of endpoint resource. Signed-off-by: Peter Oh <poh@broadcom.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: host: fsl-mph-dr-of: Staticize local symbolsSachin Kamat
Local symbols used in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: f_eem: Staticize eem_allocSachin Kamat
'eem_alloc' is local to this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: f_ecm: Staticize ecm_allocSachin Kamat
'ecm_alloc' is local to this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: phy: omap-usb3: Fix return valueSachin Kamat
The function returns a pointer. Hence return NULL instead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: gadget: avoid memory leak when failing to allocate all epsDavid Cohen
If dwc3_gadget_init_endpoint() fails after allocate some of the eps, we need to free their memory to avoid leak. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: remove extcon dependencyHeikki Krogerus
It is required by the OMAP glue driver, but it already depends on it. The core driver should not depend on it. This will allow the use of the PCI glue driver again. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register()Chen Gang
They are only called by '__ref' function multi_bind(), and they will call '__init' functions, so recommend to let them '__ref' too. The related warnings: WARNING: drivers/usb/gadget/g_multi.o(.text+0xded6): Section mismatch in reference from the variable .LM2921 to the variable .init.text:_rndis_do_config The function .LM2921() references the variable __init _rndis_do_config. This is often because .LM2921 lacks a __init annotation or the annotation of _rndis_do_config is wrong. WARNING: drivers/usb/gadget/g_multi.o(.text+0xdf16): Section mismatch in reference from the variable .LM2953 to the variable .init.text:_cdc_do_config The function .LM2953() references the variable __init _cdc_do_config. This is often because .LM2953 lacks a __init annotation or the annotation of _cdc_do_config is wrong. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: pci: add support for BayTrailHeikki Krogerus
Add PCI id for Intel BayTrail. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17MIPS: Fix accessing to per-cpu data when flushing the cacheRalf Baechle
This fixes the following issue BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761 caller is blast_dcache32+0x30/0x254 Call Trace: [<8047f02c>] dump_stack+0x8/0x34 [<802e7e40>] debug_smp_processor_id+0xe0/0xf0 [<80114d94>] blast_dcache32+0x30/0x254 [<80118484>] r4k_dma_cache_wback_inv+0x200/0x288 [<80110ff0>] mips_dma_map_sg+0x108/0x180 [<80355098>] ide_dma_prepare+0xf0/0x1b8 [<8034eaa4>] do_rw_taskfile+0x1e8/0x33c [<8035951c>] ide_do_rw_disk+0x298/0x3e4 [<8034a3c4>] do_ide_request+0x2e0/0x704 [<802bb0dc>] __blk_run_queue+0x44/0x64 [<802be000>] queue_unplugged.isra.36+0x1c/0x54 [<802beb94>] blk_flush_plug_list+0x18c/0x24c [<802bec6c>] blk_finish_plug+0x18/0x48 [<8026554c>] journal_commit_transaction+0x3b8/0x151c [<80269648>] kjournald+0xec/0x238 [<8014ac00>] kthread+0xb8/0xc0 [<8010268c>] ret_from_kernel_thread+0x14/0x1c Caches in most systems are identical - but not always, so we can't avoid the use of smp_call_function() by just looking at the boot CPU's data, have to fiddle with preemption instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5835
2013-09-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull more tile architecture updates from Chris Metcalf: "This second batch of changes is just cleanup of various kinds from doing some tidying work in the sources. Some dead code is removed, comment typos fixed, whitespace and style issues cleaned up, and some header updates from our internal "upstream" architecture team" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: remove stray blank space tile: <arch/> header updates from upstream tile: improve gxio iorpc autogenerated code style tile: double default VMALLOC space tile: remove stale arch/tile/kernel/futex_64.S tile: remove HUGE_VMAP dead code tile: use pmd_pfn() instead of casting via pte_t tile: fix typos in comment in arch/tile/kernel/unaligned.c
2013-09-17usb: gadget: cdc2: fix conversion to new interface of f_ecmAndrzej Pietrasiewicz
This fixes commit a38a275030086d95306555e544fc7c0e65ccd00e (usb: gadget: cdc2: convert to new interface of f_ecm) The invocation of usb_get_function_instance() is in cdc_bind() and should not be repeated in cdc_do_config(). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: fix a bug and a WARN_ON in dummy-hcdAlan Stern
This patch fixes a NULL pointer dereference and a WARN_ON in dummy-hcd. These things were the result of moving to the UDC core framework, and possibly of changes to that framework. Now unloading a gadget driver causes the UDC to be stopped after the gadget driver is unbound, not before. Therefore the "driver" argument to dummy_udc_stop() can be NULL, so we must not try to print the driver's name without checking first. Also, the UDC framework automatically unregisters the gadget when the UDC is deleted. Therefore a sysfs attribute file attached to the gadget must be removed before the UDC is deleted, not after. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: mv_u3d_core: fix violation of locking discipline in ↵Alexey Khoroshilov
mv_u3d_ep_disable() mv_u3d_nuke() expects to be calles with ep->u3d->lock held, because mv_u3d_done() does. But mv_u3d_ep_disable() calls it without lock that can lead to unpleasant consequences. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17staging: line6: add bounds check in snd_toneport_source_put()Dan Carpenter
"source" comes from the user in snd_ctl_elem_write() so it needs to be checked. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17Staging: comedi: Fix dependencies for drivers misclassified as PCIBen Hutchings
The Fastwel UNIOxx-5 is a PC/104 board, so put COMEDI_UNIOXX5 under COMEDI_ISA_DRIVERS. The DIL/Net-PC 1486 is a 486 system, so put COMEDI_SSV_DNP under COMEDI_MISC_DRIVERS and add a dependency on X86_32 || COMPILE_TEST. Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Adjust RX gainLarry Finger
In some circumstances, the performance of this driver is highly degraded, and ifconfig reports large numbers of dropped packets. By increasing the maximum RX gain from 0x3e to 0x4e, performance is greatly improved. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix smatch warning in core/rtw_ieee80211.Larry Finger
Smatch shows the following warning: drivers/staging/rtl8188eu/core/rtw_ieee80211.c:161 rtw_set_ie() info: ignoring unreachable code. The cause is a module exit tracing statement after a return. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.cLarry Finger
Smatch reports the following warning: "drivers/staging/rtl8188eu/core/rtw_mlme_ext.c:8328 mlme_evt_hdl() error: buffer overflow 'wlanevents' 24 <= 24" 8321 /* checking if event code is valid */ 8322 if (evt_code >= MAX_C2HEVT) { ^^^^^^^^^^^^^^^^^^^^^^ 8323 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nEvent Code(%d) mismatch!\n", evt_code)); 8324 goto _abort_event_; 8325 } 8326 8327 /* checking if event size match the event parm size */ 8328 if ((wlanevents[evt_code].parmsize != 0) && ^^^^^^^^^^^^^^^^^^^^ 8329 (wlanevents[evt_code].parmsize != evt_sz)) { 8330 RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, 8331 ("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n", 8332 evt_code, wlanevents[evt_code].parmsize, evt_sz)); 8333 goto _abort_event_; 8334 } This warning results because the number of items in "enum rtw_c2h_event", which determines the value of MAX_C2HEVT, is one more than in "struct wlanevents". Adding an extra dummy event to the latter fixes the problem. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.cLarry Finger
Smatch reports the following warning: "drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2008 Hal_ReadPowerValueFromPROM_8188E() error: buffer overflow 'pwrInfo24G->IndexBW40_Base[rfPath]' 5 <= 5" drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c 2005 /* 2.4G default value */ 2006 for (group = 0; group < MAX_CHNL_GROUP_24G; group++) { 2007 pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; 2008 pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX; The reason is that IndexCCK_Base[] has MAX_CHNL_GROUP_24G elements, but IndexBW40_Base is smaller by 1. Make them both have MAX_CHNL_GROUP_24G elements. Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: Disable lustre file system for MIPS, SH, and XTENSAGuenter Roeck
mips allmodconfig fails with ERROR: "copy_from_user_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! which is due to LUSTRE using copy_from_user_page which is not exported by any architecture. Unfortunately, LUSTRE can only be built as module, so there is no easy fix. MIPS, SH, and optionally XTENSA implement copy_from_user_page as unexported functions. Disable LUSTRE for those. Cc: Peng Tao <bergwolf@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17Revert "staging: zram: Add auto loading of module if user opens /dev/zram."Greg Kroah-Hartman
This reverts commit c70bda992c12e593e411c02a52e4bd6985407539. It's incorrect, Kay writes: Please just remove it. "devname" is meant to be used for single-instance devices with a static dev_t, never for things like zramX. It will not do anything useful here, it does nothing really without a statically assigned dev_t, and it should not be used for devices of this kind anyway. Reported-by: Tom Gundersen <teg@jklm.no> Reported-by: Kay Sievers <kay@vrfy.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: octeon-ethernet: rgmii: enable interrupts that we can handleAaro Koskinen
Enable only those interrupts that we can handle & acknowledge in the interrupt handler. At least on EdgeRouter Lite, the hardware may occasionally interrupt with some error condition when the physical link status changes frequently. Since the interrupt condition is not acked properly, this leads to the following warning and the IRQ gets disabled completely: [ 41.324700] eth0: Link down [ 44.324721] eth0: 1000 Mbps Full duplex, port 0, queue 0 [ 44.885590] irq 117: nobody cared (try booting with the "irqpoll" option) [ 44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8 [ 44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000 ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000 ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7 ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000 0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18 ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174 ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000 ... [ 44.968408] Call Trace: [ 44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80 [ 44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8 [ 44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108 [ 44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0 [ 44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200 [ 44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90 [ 45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148 [ 45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50 [ 45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30 [ 45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8 [ 45.025958] [ 45.027451] handlers: [ 45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt [ 45.035397] Disabling IRQ #117 [ 45.038742] Port 0 receive error code 13, packet dropped [ 46.324719] eth0: Link down [ 48.324733] eth0: 1000 Mbps Full duplex, port 0, queue 0 Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: octeon-ethernet: remove skb alloc failure warningsAaro Koskinen
Remove skb allocation failure warnings. They will trigger a page allocation warning already. Also, one of the warnings was not ratelimited, causing the box to lock up under heavy traffic & low memory. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: octeon-ethernet: make dropped packets to consume NAPI budgetAaro Koskinen
We should count also dropped packets, otherwise the NAPI handler may end up running too long. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c: rename PTRS_PER_PAGEAndrew Morton
It duplicates the definition in arch/alpha/include/asm/pgtable.h and emits warnings. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peng Tao <tao.peng@emc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: dgnc: fix potential format string flawKees Cook
Make sure that format strings cannot leak into printk() calls from the msgbuf string. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: lustre: clean up format string usagesKees Cook
This fixes up the usage of snprintf, strncpy, and format strings in the call to kthread_run to avoid ever accidentally allowing a format string into the thread name. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: dgap: fix overflows and format stringsKees Cook
The boot message buffer could potentially overflow the stack and the heap. Additionally make sure format strings could not leak into printk() calls. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: xillybus: fix format string usageKees Cook
Makes sure format string cannot leak into device_create() call. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging: r8188eu: Fix uninitialized variable change_inxGeert Uytterhoeven
drivers/staging/rtl8188eu/core/rtw_wlan_util.c: In function ‘WMMOnAssocRsp’: drivers/staging/rtl8188eu/core/rtw_wlan_util.c:634: warning: ‘change_inx’ may be used uninitialized in this function And the compiler is right: change_inx should be initialized to false. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging/lustre: Correct default for LUSTRE_TRANSLATE_ERRNOSGeert Uytterhoeven
LUSTRE_TRANSLATE_ERRNOS is never enabled, a "true" is not a valid value. Use "default y" instead of "default true" to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging/vt6656: Fix screwed up indentation in swGetOFDMControlRateDave Jones
The indentation in the swGetOFDMControlRate function is screwed up. At first it appears that there are missing braces on a multi-line if, but looking at history, commit dd0a774fc727ee793780197beb3f2cf80bfefa99 ("staging: vt6656: card/main_usb/device use new structure names") incorrectly indented the two lines below. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17staging/rtl8188eu: pass channel list by reference instead of copying struct.Dave Jones
Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-18drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure pathBen Skeggs
TTM calls the destructor on its own already... Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-18drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEMBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-18drm/nouveau/kms: enable for non-vga pci classesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-18drm/nouveau/bios/init: stub opcode 0xaaBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-17ARM: dts: OMAP5: fix ocp2scp DTS dataFelipe Balbi
Fix the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: OMAP5: fix reg property sizeFelipe Balbi
USB3 block has a 64KiB space, another 64KiB is used for the wrapper. Without this change, resource_size() will get confused and driver won't probe because size will be negative. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: am335x-bone*: add DT for BeagleBone BlackKoen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: omap3-beagle-xm: fix string error in compatible propertyRobert Nelson
The beagle and beagle-xm entries were inside the same double quote. Split them to have two distinct entries. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17MIPS: Provide nice way to access boot CPU's data.Ralf Baechle
boot_cpu_data is used the same as current_cpu_data but returns the CPU data for CPU 0. This means it doesn't have to use smp_processor_id() thus no need to disable preemption. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17netfilter: nfnetlink_queue: use network skb for sequence adjustmentGao feng
Instead of the netlink skb. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-17iommu/arm-smmu: don't enable SMMU device until probing has completedWill Deacon
We currently reset and enable the SMMU before the device has finished being probed, so if we fail later on (for example, because we couldn't request a global irq successfully) then we will leave the device in an active state. This patch delays the reset and enabling of the SMMU hardware until probing has completed. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-17iommu/arm-smmu: fix iommu_present() test in initDan Carpenter
The extra semi-colon on the end breaks the test. Cc: <stable@vger.kernel.org> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-17iommu/arm-smmu: fix a signedness bugDan Carpenter
Unsigned char is never equal to -1. Cc: <stable@vger.kernel.org> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-17regulator: fix fatal kernel-doc errorRandy Dunlap
Fix fatal kernel-doc error in <linux/regulator/driver.h>: Error(include/linux/regulator/driver.h:52): cannot understand prototype: 'struct regulator_linear_range ' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [Rewrote first line -- broonie] Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17kvm: free resources after canceling async_pfRadim Krčmář
When we cancel 'async_pf_execute()', we should behave as if the work was never scheduled in 'kvm_setup_async_pf()'. Fixes a bug when we can't unload module because the vm wasn't destroyed. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-17KVM: nEPT: reset PDPTR register cache on nested vmentry emulationGleb Natapov
After nested vmentry stale cache can be used to reload L2 PDPTR pointers which will cause L2 guest to fail. Fix it by invalidating cache on nested vmentry emulation. https://bugzilla.kernel.org/show_bug.cgi?id=60830 Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:44:06 +0000