summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-09-17KVM: mmu: allow page tables to be in read-only slotsPaolo Bonzini
Page tables in a read-only memory slot will currently cause a triple fault because the page walker uses gfn_to_hva and it fails on such a slot. OVMF uses such a page table; however, real hardware seems to be fine with that as long as the accessed/dirty bits are set. Save whether the slot is readonly, and later check it when updating the accessed and dirty bits. Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-17KVM: x86 emulator: emulate RETF immBruce Rogers
Opcode CA This gets used by a DOS based NetWare guest. Signed-off-by: Bruce Rogers <brogers@suse.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-17staging: octeon-ethernet: rgmii: enable interrupts that we can handleAaro Koskinen
Enable only those interrupts that we can handle & acknowledge in the interrupt handler. At least on EdgeRouter Lite, the hardware may occasionally interrupt with some error condition when the physical link status changes frequently. Since the interrupt condition is not acked properly, this leads to the following warning and the IRQ gets disabled completely: [ 41.324700] eth0: Link down [ 44.324721] eth0: 1000 Mbps Full duplex, port 0, queue 0 [ 44.885590] irq 117: nobody cared (try booting with the "irqpoll" option) [ 44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8 [ 44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000 ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000 ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7 ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000 0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18 ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174 ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000 ... [ 44.968408] Call Trace: [ 44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80 [ 44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8 [ 44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108 [ 44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0 [ 44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200 [ 44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90 [ 45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148 [ 45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50 [ 45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30 [ 45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8 [ 45.025958] [ 45.027451] handlers: [ 45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt [ 45.035397] Disabling IRQ #117 [ 45.038742] Port 0 receive error code 13, packet dropped [ 46.324719] eth0: Link down [ 48.324733] eth0: 1000 Mbps Full duplex, port 0, queue 0 Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17staging: octeon-ethernet: remove skb alloc failure warningsAaro Koskinen
Remove skb allocation failure warnings. They will trigger a page allocation warning already. Also, one of the warnings was not ratelimited, causing the box to lock up under heavy traffic & low memory. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/5811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17staging: octeon-ethernet: make dropped packets to consume NAPI budgetAaro Koskinen
We should count also dropped packets, otherwise the NAPI handler may end up running too long. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5809/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17vhost: wake up worker outside spin_lockQin Chuanyu
the wake_up_process func is included by spin_lock/unlock in vhost_work_queue, but it could be done outside the spin_lock. I have test it with kernel 3.0.27 and guest suse11-sp2 using iperf, the num as below. original modified thread_num tp(Gbps) vhost(%) | tp(Gbps) vhost(%) 1 9.59 28.82 | 9.59 27.49 8 9.61 32.92 | 9.62 26.77 64 9.58 46.48 | 9.55 38.99 256 9.6 63.7 | 9.6 52.59 Signed-off-by: Chuanyu Qin <qinchuanyu@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-17dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMAJosh Boyer
The TI_EDMA driver unconditionally calls functions provided by the TI_PRIV_EDMA code, but it doesn't force that to be built-in. If that isn't otherwise enabled somewhere, you can get build errors like: linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:593: undefined reference to `edma_free_slot' drivers/built-in.o: In function `edma_terminate_all': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:169: undefined reference to `edma_stop' drivers/built-in.o: In function `edma_execute': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:122: undefined reference to `edma_write_slot' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:149: undefined reference to `edma_link' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:152: undefined reference to `edma_start' Make TI_EDMA select TI_PRIV_EDMA to avoid this. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-17edma: Update author email addressJosh Boyer
Matt's @ti.com address bounces. Update the MODULE_AUTHOR information in edma.c to his Linaro address. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-17ARM: dts: imx6q: fix the wrong offset of the Pad Mux registerHuang Shijie
The patch "0b7a76a ARM: dts: imx6q{dl}: add DTE pads for uart" adds the DTE pads for uart. For PAD_EIM_D29, the offset of the Pad Mux register should be 0x0c8, not 0x0c4. This patch fixes it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx: i.mx6d/q: disable the double linefill feature of PL310Jason Liu
The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 But according to ARM PL310 errata: 752271 ID: 752271: Double linefill feature can cause data corruption Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 Workaround: The only workaround to this erratum is to disable the double linefill feature. This is the default behavior. without this patch, you will meet the following error when run the memtester application at: http://pyropus.ca/software/memtester/ FAILURE: 0x00100000 != 0x00200000 at offset 0x01365664. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365668. FAILURE: 0x00100000 != 0x00200000 at offset 0x0136566c. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365670. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365674. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365678. Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx51.dtsi: fix PATA device clockArnaud Patard (Rtp)
Commit 718a350 (ARM: i.MX51: Add PATA support) adds pata support to the imx51.dtsi file and is using clock 161. The problem is that the right clock is 172, according to commit 5d530bb (ARM: i.MX5: Add PATA and SRTC clocks). Using the clock 172 makes things work again (and kills a nasty system freeze). Tested-by: Steev Klimaszewski <steev@gentoo.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: mach-imx: clk-imx51-imx53: Fix 'spdif1_pred' clock registrationFabio Estevam
Since commit beb2d1c1ba (ARM i.MX5: Add S/PDIF clocks), the following clock error appears on mx51: TrustZone Interrupt Controller (TZIC) initialized i.MX51 clk 180: register failed with -17 i.MX5 clk 180: register failed with -17 sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms CPU identified as i.MX51, silicon rev 3.0 ... Clock 180 corresponds to 'spdif1_podf' and this clock is getting registered twice. Fix it, by properly registering the 'spdif1_pred' clock, which should not reference 'spdif1_podf'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx: initialize clk_init_data.flags for clk-fixup-muxShawn Guo
The clk_init_data.flags of clk-fixup-mux is left there without initialization. It may hold some random data and cause clock framework interpret the clock in an unexpected way. At least on imx6sl, the following division by zero error with sched_clock is seen because of it. Division by zero in kernel. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc3+ #19 Backtrace: [<80011af0>] (dump_backtrace+0x0/0x10c) from [<80011c90>] (show_stack+0x18/0x1c) r6:3b9aca00 r5:00000020 r4:00000000 r3:00000000 [<80011c78>] (show_stack+0x0/0x1c) from [<8055e02c>] (dump_stack+0x78/0x94) [<8055dfb4>] (dump_stack+0x0/0x94) from [<80011924>] (__div0+0x18/0x20) r4:00000000 r3:00000000 [<8001190c>] (__div0+0x0/0x20) from [<8026c408>] (Ldiv0_64+0x8/0x18) [<8006330c>] (clocks_calc_mult_shift+0x0/0xf8) from [<8072f604>] (setup_sched_clock+0x88/0x1f0) [<8072f57c>] (setup_sched_clock+0x0/0x1f0) from [<8071ad48>] (mxc_timer_init+0xe8/0x17c) [<8071ac60>] (mxc_timer_init+0x0/0x17c) from [<807290b0>] (imx6sl_clocks_init+0x1db8/0x1dc0) r8:807a9ca4 r7:00000000 r6:80777564 r5:8100c1f4 r4:c0820000 [<807272f8>] (imx6sl_clocks_init+0x0/0x1dc0) from [<807420ac>] (of_clk_init+0x40/0x6c) [<8074206c>] (of_clk_init+0x0/0x6c) from [<807290cc>] (imx6sl_timer_init+0x14/0x18) r5:807a8e80 r4:ffffffff [<807290b8>] (imx6sl_timer_init+0x0/0x18) from [<80716e1c>] (time_init+0x24/0x34) [<80716df8>] (time_init+0x0/0x34) from [<80713738>] (start_kernel+0x1b0/0x310) [<80713588>] (start_kernel+0x0/0x310) from [<80008074>] (0x80008074) r7:80770b08 r6:80754cd4 r5:8076c8c4 r4:10c53c7d sched_clock: 32 bits at 0 Hz, resolution 0ns, wraps every 0ms Fix the bug by initializing init.flags as zero. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx27.dtsi: fix CSPI PER clock idGwenhael Goavec-Merou
CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-16Merge branch 'sfc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
Ben Hutchings says: ==================== Some bug fixes and future-proofing for the recently added SFC9120 support: 1. Minimal support for the 40G configuration. 2. Disable the incomplete PTP/hardware timestamping support. 3. Reset MAC stats properly after a firmware upgrade. 4. Re-check the datapath firmware capabilities after the controller is reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: sctp: rfc4443: do not report ICMP redirects to user spaceDaniel Borkmann
Adapt the same behaviour for SCTP as present in TCP for ICMP redirect messages. For IPv6, RFC4443, section 2.4. says: ... (e) An ICMPv6 error message MUST NOT be originated as a result of receiving the following: ... (e.2) An ICMPv6 redirect message [IPv6-DISC]. ... Therefore, do not report an error to user space, just invoke dst's redirect callback and leave, same for IPv4 as done in TCP as well. The implication w/o having this patch could be that the reception of such packets would generate a poll notification and in worst case it could even tear down the whole connection. Therefore, stop updating sk_err on redirects. Reported-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: usb: cdc_ether: use usb.h macros whenever possibleFabio Porcedda
Use USB_DEVICE_AND_INTERFACE_INFO and USB_VENDOR_AND_INTERFACE_INFO macros to reduce boilerplate. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: usb: cdc_ether: fix checkpatch errors and warningsFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: usb: cdc_ether: Use wwan interface for Telit modulesFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: <stable@vger.kernel.org> # 3.0+ as far back as it applies cleanly Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16ip6_tunnels: raddr and laddr are inverted in nl msgDing Zhi
IFLA_IPTUN_LOCAL and IFLA_IPTUN_REMOTE were inverted. Introduced by c075b13098b3 (ip6tnl: advertise tunnel param via rtnl). Signed-off-by: Ding Zhi <zhi.ding@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bgmac: implement unaligned addressing for DMA rings that support itRafał Miłecki
This is important patch for new devices that support unaligned addressing. That devices suffer from the backward-compatibility bug in DMA engine. In theory we should be able to use old mechanism, but in practice DMA address seems to be randomly copied into status register when hardware reaches end of a ring. This breaks reading slot number from status register and we can't use DMA anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bgmac: allow bigger et_swtype nvram variableHauke Mehrtens
Without this patch it is impossible to read et_swtype, because the 1 byte space is needed for the terminating null byte. The max expected value is 0xF, so now it should be possible to read decimal form ("15") and hex form ("0xF"). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bgmac: fix internal switch initializationRafał Miłecki
Some devices (BCM4749, BCM5357, BCM53572) have internal switch that requires initialization. We already have code for this, but because of the typo in code it was never working. This resulted in network not working for some routers and possibility of soft-bricking them. Use correct bit for switch initialization and fix typo in the define. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16drivers/net/ethernet/ibm/ehea/ehea_main.c: add alias entry for portN propertiesOlaf Hering
Use separate table for alias entries in the ehea module, otherwise the probe() function will operate on the separate ports instead of the lhea-"root" entry of the device-tree Addresses https://bugzilla.novell.com/show_bug.cgi?id=435215 [ Thadeu notes that: "... this issue might happen with the generation of initrd, when the scripts check for /sys/class/net/eth0/device/modalias, which links to the port device at /sys/devices/ibmebus/23c00400.lhea/port0/" ] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Olaf Hering <ohering@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17regulator: palmas: Remove wrong comment for the equation calculating ↵Axel Lin
num_voltages Current equation on the comment is wrong. For linear mapping starting from 0, the equation is (maxV-minV)/stepV + 1. Since the linear mapping for PALMAS is not all starting from 0, the equation on the comment is not useful and misleading. Thus remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17ASoC: blackfin: Add missing break statement to bf6xxValentin Ilie
SNDRV_PCM_FORMAT_S8 isn't supposed to fall through to SNDRV_PCM_FORMAT_S16_LE Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-16vfs: don't set FILE_CREATED before calling ->atomic_open()Miklos Szeredi
If O_CREAT|O_EXCL are passed to open, then we know that either - the file is successfully created, or - the operation fails in some way. So previously we set FILE_CREATED before calling ->atomic_open() so the filesystem doesn't have to. This, however, led to bugs in the implementation that went unnoticed when the filesystem didn't check for existence, yet returned success. To prevent this kind of bug, require filesystems to always explicitly set FILE_CREATED on O_CREAT|O_EXCL and verify this in the VFS. Also added a couple more verifications for the result of atomic_open(): - Warn if filesystem set FILE_CREATED despite the lack of O_CREAT. - Warn if filesystem set FILE_CREATED but gave a negative dentry. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-16nfs: set FILE_CREATEDMiklos Szeredi
Set FILE_CREATED on O_CREAT|O_EXCL. If the NFS server honored our request for exclusivity then this must be correct. Currently this is a no-op, since the VFS sets FILE_CREATED anyway. The next patch will, however, require this flag to be always set by filesystems. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-16gfs2: set FILE_CREATEDMiklos Szeredi
In gfs2_create_inode() set FILE_CREATED in *opened. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-16cifs: fix filp leak in cifs_atomic_open()Miklos Szeredi
If an error occurs after having called finish_open() then fput() needs to be called on the already opened file. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Steve French <sfrench@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-16vfs: improve i_op->atomic_open() documentationMiklos Szeredi
Fix documentation of ->atomic_open() and related functions: finish_open() and finish_no_open(). Also add details that seem to be unclear and a source of bugs (some of which are fixed in the following series). Cc-ing maintainers of all filesystems implementing ->atomic_open(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Sage Weil <sage@inktank.com> Cc: Steve French <sfrench@samba.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-16autofs4: close the races around autofs4_notify_daemon()Al Viro
Don't drop ->wq_mutex before calling autofs4_notify_daemon() only to regain it there. Besides being pointless, that opens a race window where autofs4_wait_release() could've come and freed wq->name.name. And do the debugging printk in the "reused an existing wq" case before dropping ->wq_mutex - the same reason... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Ian Kent <raven@themaw.net>
2013-09-16Linux 3.12-rc1v3.12-rc1Linus Torvalds
2013-09-16Merge branch 'timers/core' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer code update from Thomas Gleixner: - armada SoC clocksource overhaul with a trivial merge conflict - Minor improvements to various SoC clocksource drivers * 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding clocksource: armada-370-xp: Get reference fixed-clock by name clocksource: armada-370-xp: Replace WARN_ON with BUG_ON clocksource: armada-370-xp: Fix device-tree binding clocksource: armada-370-xp: Introduce new compatibles clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE clocksource: armada-370-xp: Simplify TIMER_CTRL register access clocksource: armada-370-xp: Use BIT() ARM: timer-sp: Set dynamic irq affinity ARM: nomadik: add dynamic irq flag to the timer clocksource: sh_cmt: 32-bit control register support clocksource: em_sti: Convert to devm_* managed helpers
2013-09-16tile: remove stray blank spaceChris Metcalf
The compat sys_llseek() definition addition added a bogus space on an otherwise-blank line. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: <arch/> header updates from upstreamChris Metcalf
The hardware architecture descriptor headers have been updated, in particular to reflect some larger MMIO fields on the mPIPE shims for controlling the network hardware, from the recent Gx72 release. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: improve gxio iorpc autogenerated code styleChris Metcalf
Fix some whitespace style issues in some auto-generated files. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: double default VMALLOC spaceChris Metcalf
With per-cpu data as well as loaded kernel modules coming from the vmalloc arena, we get close to the line all the time and occasionally need more than we had, so just double it up by default. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French: "Two minor cifs fixes and a minor documentation cleanup for cifs.txt" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs.txt and remove some outdated infos cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache cifs: Do not take a reference to the page in cifs_readpage_worker()
2013-09-16Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull UBI fixes from Artem Bityutskiy: "Just a single fastmap fix plus a regression fix" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi: UBI: Fix invalidate_fastmap() UBI: Fix PEB leak in wear_leveling_worker()
2013-09-16Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubifs fix from Artem Bityutskiy: "Just one patch which fixes the power-cut recovery testing mode. I'll start using a single UBI/UBIFS tree instead of 2 trees from now on. So in the future you'll get 1 small pull request instead of 2 tiny ones" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: remove invalid warn msg with tst_recovery enabled
2013-09-16netfilter: ipset: Fix serious failure in CIDR trackingOliver Smith
This fixes a serious bug affecting all hash types with a net element - specifically, if a CIDR value is deleted such that none of the same size exist any more, all larger (less-specific) values will then fail to match. Adding back any prefix with a CIDR equal to or more specific than the one deleted will fix it. Steps to reproduce: ipset -N test hash:net ipset -A test 1.1.0.0/16 ipset -A test 2.2.2.0/24 ipset -T test 1.1.1.1 #1.1.1.1 IS in set ipset -D test 2.2.2.0/24 ipset -T test 1.1.1.1 #1.1.1.1 IS NOT in set This is due to the fact that the nets counter was unconditionally decremented prior to the iteration that shifts up the entries. Now, we first check if there is a proceeding entry and if not, decrement it and return. Otherwise, we proceed to iterate and then zero the last element, which, in most cases, will already be zero. Signed-off-by: Oliver Smith <oliver@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-09-16netfilter: ipset: Validate the set family and not the set type family at ↵Jozsef Kadlecsik
swapping This closes netfilter bugzilla #843, reported by Quentin Armitage. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-09-16netfilter: ipset: Consistent userspace testing with nomatch flagJozsef Kadlecsik
The "nomatch" commandline flag should invert the matching at testing, similarly to the --return-nomatch flag of the "set" match of iptables. Until now it worked with the elements with "nomatch" flag only. From now on it works with elements without the flag too, i.e: # ipset n test hash:net # ipset a test 10.0.0.0/24 nomatch # ipset t test 10.0.0.1 10.0.0.1 is NOT in set test. # ipset t test 10.0.0.1 nomatch 10.0.0.1 is in set test. # ipset a test 192.168.0.0/24 # ipset t test 192.168.0.1 192.168.0.1 is in set test. # ipset t test 192.168.0.1 nomatch 192.168.0.1 is NOT in set test. Before the patch the results were ... # ipset t test 192.168.0.1 192.168.0.1 is in set test. # ipset t test 192.168.0.1 nomatch 192.168.0.1 is in set test. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-09-16netfilter: ipset: Skip really non-first fragments for IPv6 when getting ↵Jozsef Kadlecsik
port/protocol Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-09-16Bluetooth: Fix ACL alive for long in case of non pariable devicesSyam Sidhardhan
For certain devices (ex: HID mouse), support for authentication, pairing and bonding is optional. For such devices, the ACL alive for too long after the L2CAP disconnection. To avoid the ACL alive for too long after L2CAP disconnection, reset the ACL disconnect timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect. While merging the commit id:a9ea3ed9b71cc3271dd59e76f65748adcaa76422 this issue might have introduced. Hcidump info: sh-4.1# /opt/hcidump -Xt 2013-08-05 16:49:00.894129 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.894195 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 2013-08-05 16:49:00.894269 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.895645 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:49:00.934391 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:00.936592 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 2013-08-05 16:49:00.951577 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.952820 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.969165 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:49:48.175533 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:48.219045 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 108 Mode: Sniff 2013-08-05 16:51:00.968209 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 12 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:51:00.969056 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:51:01.013495 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:51:01.073777 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 12 reason 0x16 Reason: Connection Terminated by Local Host ============================ After fix ================================ 2013-08-05 16:57:35.986648 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004c scid 0x0041 2013-08-05 16:57:35.986713 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 11 2013-08-05 16:57:35.986785 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004b scid 0x0040 2013-08-05 16:57:35.988110 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:57:36.030714 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:36.032950 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 11 packets 2 2013-08-05 16:57:36.047926 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004c scid 0x0041 2013-08-05 16:57:36.049200 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004b scid 0x0040 2013-08-05 16:57:36.065509 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:57:40.052006 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 11 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:57:40.052869 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:57:40.104731 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:40.146935 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 11 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Sang-Ki Park <sangki79.park@samsung.com> Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Add support for BCM20702A0 [0b05, 17cb]Raphael Kubo da Costa
Yet another vendor specific ID for this chipset; this one for the ASUS USB-BT400 Bluetooth 4.0 adapter. T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17cb Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=000272C64400 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Cc: stable@vger.kernel.org Signed-off-by: Raphael Kubo da Costa <rakuco@FreeBSD.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Fix encryption key size for peripheral roleAndre Guedes
This patch fixes the connection encryption key size information when the host is playing the peripheral role. We should set conn->enc_key_ size in hci_le_ltk_request_evt, otherwise it is left uninitialized. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Fix security level for peripheral roleAndre Guedes
While playing the peripheral role, the host gets a LE Long Term Key Request Event from the controller when a connection is established with a bonded device. The host then informs the LTK which should be used for the connection. Once the link is encrypted, the host gets an Encryption Change Event. Therefore we should set conn->pending_sec_level instead of conn-> sec_level in hci_le_ltk_request_evt. This way, conn->sec_level is properly updated in hci_encrypt_change_evt. Moreover, since we have a LTK associated to the device, we have at least BT_SECURITY_MEDIUM security level. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.Peng Chen
usb device info: T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 15 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e005 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms Cc: Stable <stable@vger.kernel.org> Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 23:19:05 +0000