summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-11-21drm/sysfs: fix hotplug regression since lifetime changesDavid Herrmann
airlied: The lifetime changes introduced in 5bdebb183c9702a8c57a01dff09337be3de337a6 tried to use device_create, however that led to the regression where dev->type wasn't getting set correctly. First attempt at fixing it would have led to a race, so this undoes the device_createa work and does it all manually making sure the dev->type is setup before we register the device. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-21GFS2: fix potential NULL pointer dereferenceMichal Nazarewicz
Commit [e66cf1610: GFS2: Use lockref for glocks] replaced call: atomic_read(&gi->gl->gl_ref) == 0 with: __lockref_is_dead(&gl->gl_lockref) therefore changing how gl is accessed, from gi->gl to plan gl. However, gl can be a NULL pointer, and so gi->gl needs to be used instead (which is guaranteed not to be NULL because fo the while loop checking that condition). Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-11-21HID: kye: fix unresponsive keyboardBenjamin Tissoires
The manticore keyboard requires that all usb EP are opened at least once to be fully functional. The third EP forwards to the user space some vendor specific information about the keyboard state, but are useless currently for the kernel. Opening them and closing them makes the keyboard responsive again. Reported-and-tested-by: Adam Kulagowski <fidor@fidor.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21HID: kye: Add report fixup for Genius Manticore KeyboardBenjamin Tissoires
Genius Manticore Keyboard presents the same problem in its report descriptors than Genius Gila Gaming Mouse and Genius Imperator Keyboard. Use the same fixup. Reported-and-tested-by: Adam Kulagowski <fidor@fidor.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21KVM: kvm_clear_guest_page(): fix empty_zero_page usageHeiko Carstens
Using the address of 'empty_zero_page' as source address in order to clear a page is wrong. On some architectures empty_zero_page is only the pointer to the struct page of the empty_zero_page. Therefore the clear page operation would copy the contents of a couple of struct pages instead of clearing a page. For kvm only arm/arm64 are affected by this bug. To fix this use the ZERO_PAGE macro instead which will return the struct page address of the empty_zero_page on all architectures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-11-21HID: multicouh: add PID VID to support 1 new Wistron optical touch deviceKaiChung Cheng
This patch adds PID VID to support for the Wistron Inc. Optical touch panel. Signed-off-by: KaiChung Cheng <kenny_cheng@wistron.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21HID: appleir: force input to be setBenjamin Tissoires
Some weird remotes are not correctly creating the input device. Their report descriptor starts with: 0x06, 0x00, 0xff, // Usage Page (Vendor Defined Page 1) 0 0xa1, 0x01, // Collection (Application) 3 whereas others (which are correctly handled) start with: 0x05, 0x0c, // Usage Page (Consumer Devices) 0 0x09, 0x01, // Usage (Consumer Control) 2 0xa1, 0x01, // Collection (Application) 4 The rest of the report descriptor is the same. Adding the quirk HID_QUIRK_HIDINPUT_FORCE forces hid-input to allocate the inputs, and everything should be ok. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: James Henstridge <james.henstridge@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21drm/exynos: g2d: fix memory leak to userptrInki Dae
This patch releases a vma object when cleaning up userptr resources. A new vma object was allocated and copied when getting userptr pages so the new vma object should be freed properly if the userptr pages aren't used anymore. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-21Merge branch 'ttm-fixes-3.13' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-fixes The set_need_resched() removal fix and yet another fix in ttm_bo_move_memcpy(). * 'ttm-fixes-3.13' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Remove set_need_resched from the ttm fault handler drm/ttm: Don't move non-existing data
2013-11-21Merge branch 'vmwgfx-fixes-3.13' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Below is a fix for a false lockep warning, and the vmwgfx prime implementation. * 'vmwgfx-fixes-3.13' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Make vmwgfx dma buffers prime aware drm/vmwgfx: Make surfaces prime-aware drm/vmwgfx: Hook up the prime ioctls drm/ttm: Add a minimal prime implementation for ttm base objects drm/vmwgfx: Fix false lockdep warning drm/ttm: Allow execbuf util reserves without ticket
2013-11-21Merge tag 'drm-intel-fixes-2013-11-20' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a small pile of fixes for bugs and a few regressions. I'm still trying to track down a driver load hang on my g33 (which infuriatingly doesn't happen when loading the module manually after boot), somehow bisecting loves to go astray on this one :( And there's a (harmless) locking WARN in the suspend code due to one of Jesse's vlv backlight rework patches. Otherwise nothing outstanding afaik. * tag 'drm-intel-fixes-2013-11-20' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix gen3 self-refresh watermarks drm/i915: Replicate BIOS eDP bpp clamping hack for hsw drm/i915: Do not enable package C8 on unsupported hardware drm/i915: Hold pc8 lock around toggling pc8.gpu_idle drm/i915: encoder->get_config is no longer optional drm/i915/tv: add ->get_config callback drm/i915: restore the early forcewake cleanup Partially revert "drm/i915: tune the RC6 threshold for stability" drm/i915: flush cursors harder i915: Use 120MHz LVDS SSC clock for gen5/gen6/gen7 x86/early quirk: use gen6 stolen detection for VLV drm/i915/dp: set sink to power down mode on dp disable
2013-11-21Merge branch 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes More fixes for radeon. This adds new queries for tiling on CIK, and fixes a crash in handling acpi atif backlight events on CIK. Some fixes for radeon for 3.13. Mostly CI stability fixes. I think I've tracked down the stability problems with dpm on Trinity/Richland, so I'm going to enable that by default now. * 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: hook up backlight functions for CI and KV family. drm/radeon/cik: Add macrotile mode array query drm/radeon/cik: Return backend map information to userspace drm/radeon: enable DPM by default in TN asics drm/radeon: adjust TN dpm parameters for stability (v2) drm/radeon: use a single doorbell for cik kms compute drm/radeon/vm: don't attempt to update ptes if ib allocation fails drm/radeon: disable CIK CP semaphores for now drm/radeon: allow semaphore emission to fail drm/radeon: add semaphore trace point radeon: workaround pinning failure on low ram gpu radeon/i2c: do not count reg index in number of i2c byte we are writing. drm/radeon: cypress_dpm: Fix unused variable warning when CONFIG_ACPI=n drm: radeon: ni_dpm: Fix unused variable warning when CONFIG_ACPI=n
2013-11-21ALSA: hda - Fix the headphone jack detection on Sony VAIO TXTakashi Iwai
BIOS sets MISC_NO_PRESENCE bit wrongly to the pin config on NID 0x0f. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-21ALSA: hda - Fix missing bass speaker on ASUS N550Takashi Iwai
The laptop has a built-in speaker on NID 0x1a. It's an LFE only on the right channel, so we need to provide an explicit chmap, too. There might be other surround speakers, but they can fixed in addition at later point, so let's fix the easier bass speaker at first. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65091 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-20iscsi-target: chap auth shouldn't match username with trailing garbageEric Seppanen
In iSCSI negotiations with initiator CHAP enabled, usernames with trailing garbage are permitted, because the string comparison only checks the strlen of the configured username. e.g. "usernameXXXXX" will be permitted to match "username". Just check one more byte so the trailing null char is also matched. Signed-off-by: Eric Seppanen <eric@purestorage.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20iscsi-target: fix extract_param to handle buffer length corner caseEric Seppanen
extract_param() is called with max_length set to the total size of the output buffer. It's not safe to allow a parameter length equal to the buffer size as the terminating null would be written one byte past the end of the output buffer. Signed-off-by: Eric Seppanen <eric@purestorage.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20MAINTAINERS - add keyboard driver to Hyper-V file listHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: atmel-wm97xx - fix compile errorDmitry Torokhov
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: hp_sdc_rtc - unlock on error in hp_sdc_rtc_read_i8042timer()Dan Carpenter
The transaction task here is hp_sdc_tasklet() and it releases the lock. The problem is if we aren't able to queue the transaction then we need to release the lock ourselves. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: cyttsp4 - remove unnecessary work pending testXie XiuQi
Remove unnecessary work pending test before calling schedule_work(). It has been tested in queue_work_on() already. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20net/phy: Add the autocross feature for forced links on VSC82x4Madalin Bucur
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add VSC8662 supportSandeep Singh
Vitesse VSC8662 is Dual Port 10/100/1000Base-T Phy Its register set and features are similar to other Vitesse Phys. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add VSC8574 supportshaohui xie
The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes interfaces for quad-port dual media capability. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add VSC8234 supportAndy Fleming
Vitesse VSC8234 is quad port 10/100/1000BASE-T PHY with SGMII and SERDES MAC interfaces. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct ↵Hannes Frederic Sowa
sockaddr_storage) In that case it is probable that kernel code overwrote part of the stack. So we should bail out loudly here. The BUG_ON may be removed in future if we are sure all protocols are conformant. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20btrfs: update kconfig help textDavid Sterba
Reflect the current status. Portions of the text taken from the wiki pages. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20btrfs: fix bio_size_ok() for max_sectors > 0xffffAkinobu Mita
The data type of max_sectors in queue settings is unsigned int. But this value is stored to the local variable whose type is unsigned short in bio_size_ok(). This can cause unexpected result when max_sectors > 0xffff. Cc: Chris Mason <chris.mason@fusionio.com> Cc: linux-btrfs@vger.kernel.org Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20btrfs: Use trace condition for get_extent tracepointSteven Rostedt
Doing an if statement to test some condition to know if we should trigger a tracepoint is pointless when tracing is disabled. This just adds overhead and wastes a branch prediction. This is why the TRACE_EVENT_CONDITION() was created. It places the check inside the jump label so that the branch does not happen unless tracing is enabled. That is, instead of doing: if (em) trace_btrfs_get_extent(root, em); Which is basically this: if (em) if (static_key(trace_btrfs_get_extent)) { Using a TRACE_EVENT_CONDITION() we can just do: trace_btrfs_get_extent(root, em); And the condition trace event will do: if (static_key(trace_btrfs_get_extent)) { if (em) { ... The static key is a non conditional jump (or nop) that is faster than having to check if em is NULL or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20btrfs: fix typo in the log messageAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: fix list delete warning when removing ordered root from the listMiao Xie
Commit b02441999efcc6152b87cd58e7970bb7843f76cf "Btrfs: don't wait for the completion of all the ordered extents" introduced a bug that broke the ordered root list: WARNING: CPU: 1 PID: 7119 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() It is because we forgot to return the roots in the splice list to the ordered list of the fs. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: print bytenr instead of page pointer in check-intStefan Behrens
The page pointer information was useless. The bytenr is what you want when you search for submitted write bios. Additionally, a new bit in the print mask is added that allows to selectively enable the check-int submit_bio verbose mode. Before, the global verbose mode had to be enabled leading to many million useless lines in the kernel log. And a comment is added that explains that LOG_BUF_SHIFT needs to be set to a really high value. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: remove dead codes from ctree.hWang Shilong
These two functions are only stated but undefined. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: don't wait for ordered data outside desired rangeFilipe David Borba Manana
In btrfs_wait_ordered_range(), if we found an extent to the left of the start of our desired wait range and the last byte of that extent is 1 less than the desired range's start, we would would wait for the IO completion of that extent unnecessarily. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: fix lockdep error in async commitLiu Bo
Lockdep complains about btrfs's async commit: [ 2372.462171] [ BUG: bad unlock balance detected! ] [ 2372.462191] 3.12.0+ #32 Tainted: G W [ 2372.462209] ------------------------------------- [ 2372.462228] ceph-osd/14048 is trying to release lock (sb_internal) at: [ 2372.462275] [<ffffffffa022cb10>] btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462305] but there are no more locks to release! [ 2372.462324] [ 2372.462324] other info that might help us debug this: [ 2372.462349] no locks held by ceph-osd/14048. [ 2372.462367] [ 2372.462367] stack backtrace: [ 2372.462386] CPU: 2 PID: 14048 Comm: ceph-osd Tainted: G W 3.12.0+ #32 [ 2372.462414] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 2372.462455] ffffffffa022cb10 ffff88007490fd28 ffffffff816f094a ffff8800378aa320 [ 2372.462491] ffff88007490fd50 ffffffff810adf4c ffff8800378aa320 ffff88009af97650 [ 2372.462526] ffffffffa022cb10 ffff88007490fd88 ffffffff810b01ee ffff8800898c0000 [ 2372.462562] Call Trace: [ 2372.462584] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462619] [<ffffffff816f094a>] dump_stack+0x45/0x56 [ 2372.462642] [<ffffffff810adf4c>] print_unlock_imbalance_bug+0xec/0x100 [ 2372.462677] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462710] [<ffffffff810b01ee>] lock_release+0x18e/0x210 [ 2372.462742] [<ffffffffa022cb36>] btrfs_commit_transaction_async+0x1d6/0x2a0 [btrfs] [ 2372.462783] [<ffffffffa025a7ce>] btrfs_ioctl_start_sync+0x3e/0xc0 [btrfs] [ 2372.462822] [<ffffffffa025f1d3>] btrfs_ioctl+0x4c3/0x1f70 [btrfs] [ 2372.462849] [<ffffffff812c0321>] ? avc_has_perm+0x121/0x1b0 [ 2372.462873] [<ffffffff812c0224>] ? avc_has_perm+0x24/0x1b0 [ 2372.462897] [<ffffffff8107ecc8>] ? sched_clock_cpu+0xa8/0x100 [ 2372.462922] [<ffffffff8117b145>] do_vfs_ioctl+0x2e5/0x4e0 [ 2372.462946] [<ffffffff812c19e6>] ? file_has_perm+0x86/0xa0 [ 2372.462969] [<ffffffff8117b3c1>] SyS_ioctl+0x81/0xa0 [ 2372.462991] [<ffffffff817045a4>] tracesys+0xdd/0xe2 ==================================================== It's because that we don't do the right thing when checking if it's ok to tell lockdep that we're trying to release the rwsem. If the trans handle's type is TRANS_ATTACH, we won't acquire the freeze rwsem, but as TRANS_ATTACH fits the check (trans < TRANS_JOIN_NOLOCK), we'll release the freeze rwsem, which makes lockdep complains a lot. Reported-by: Ma Jianpeng <majianpeng@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: avoid heavy operations in btrfs_commit_superLiu Bo
The 'git blame' history shows that, the old transaction commit code has to do twice to ensure roots are updated and we have to flush metadata and super block manually, however, right now all of these can be handled well inside the transaction commit code without extra efforts. And the error handling part remains same with the current code, -- 'return to caller once we get error'. This saves us a transaction commit and a flush of super block, which are both heavy operations according to ftrace output analysis. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: fix __btrfs_start_workers retvalIlya Dryomov
__btrfs_start_workers returns 0 in case it raced with btrfs_stop_workers and lost the race. This is wrong because worker in this case is not allowed to start and is in fact destroyed. Return -EINVAL instead. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: disable online raid-repair on ro mountsIlya Dryomov
This disables the "if needed, write the good copy back before the read is completed" part of the read sequence for read-only mounts. Cc: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: do not inc uncorrectable_errors counter on ro scrubsIlya Dryomov
Currently if we discover an error when scrubbing in ro mode we a) blindly increment the uncorrectable_errors counter, and b) spam the dmesg with the 'unable to fixup (regular) error at ...' message, even though a) we haven't tried to determine if the error is correctable or not, and b) we haven't tried to fixup anything. Fix this. Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: only drop modified extents if we logged the whole inodeJosef Bacik
If we fsync, seek and write, rename and then fsync again we will lose the modified hole extent because the rename will drop all of the modified extents since we didn't do the fast search. We need to only drop the modified extents if we didn't do the fast search and we were logging the entire inode as we don't need them anymore, otherwise this is being premature. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: make sure to copy everything if we renameJosef Bacik
If we rename a file that is already in the log and we fsync again we will lose the new name. This is because we just log the inode update and not the new ref. To fix this we just need to check if we are logging the new name of the inode and copy all the metadata instead of just updating the inode itself. With this patch my testcase now passes. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Btrfs: don't BUG_ON() if we get an error walking backrefsJosef Bacik
We can just return false for this so we stop doing the snapshot aware defrag stuff. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20x86, wmi fix modalias_show return valuesPrarit Bhargava
I just fixed this same bug in arch/powerpc/kernel/vio.c and took a quick look for other similar errors in the kernel. modalias_show() should return an empty string on error, not errno. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Added support for IPC interrupt modeKuppuswamy Sathyanarayanan
This patch adds support for ipc command interrupt mode. Also added platform data option to select 'irq_mode' irq_mode = 1: configure the driver to receive IOC interrupt for each successful ipc_command. irq_mode = 0: makes driver use polling method to track the command completion status. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-21ACPI / sleep: clean up compiler warning about uninitialized fieldAl Stone
Initialize pwr_btn_status as disabled which (a) makes sure it is in a proper state to start, and (b) cleans up a compiler warning about an uninitialized variable. Signed-off-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-20ipc: Handle error conditions in ipc commandKuppuswamy Sathyanarayanan
Handle error conditions in intel_scu_ipc_command() and pwr_reg_rdwr(). Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Enabled ipc support for additional intel platformsKuppuswamy Sathyanarayanan
Enabled ipc support for penwell, clovertrail & tangier platforms. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Added platform data structureKuppuswamy Sathyanarayanan
Since the same ipc driver can be used by many platforms, using macros for defining ipc_base and i2c_base addresses is not a scalable approach. So added a platform data structure to pass this information. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20thinkpad_acpi: Fix build error when CONFIG_SND_MAX_CARDS > 32Takashi Iwai
SNDRV_CARDS can be specified via Kconfig since 3.11 kernel, so this can be over 32bit integer range, which leads to a build error. Cc: <stable@vger.kernel.org> [v3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20platform: add chrome platform directoryOlof Johansson
It makes sense to split out the Chromebook/Chromebox hardware platform drivers to a separate subdirectory, since some of it will be shared between ARM and x86. This moves over the existing chromeos_laptop driver without making any other changes, and adds appropriate Kconfig entries for the new directory. It also adds a MAINTAINERS entry for the new subdir. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>