summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-01-23Revert "sched: Fix sleep time double accounting in enqueue entity"Vincent Guittot
This reverts commit 282cf499f03ec1754b6c8c945c9674b02631fb0f. With the current implementation, the load average statistics of a sched entity change according to other activity on the CPU even if this activity is done between the running window of the sched entity and have no influence on the running duration of the task. When a task wakes up on the same CPU, we currently update last_runnable_update with the return of __synchronize_entity_decay without updating the runnable_avg_sum and runnable_avg_period accordingly. In fact, we have to sync the load_contrib of the se with the rq's blocked_load_contrib before removing it from the latter (with __synchronize_entity_decay) but we must keep last_runnable_update unchanged for updating runnable_avg_sum/period during the next update_entity_load_avg. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Cc: pjt@google.com Cc: alex.shi@linaro.org Link: http://lkml.kernel.org/r/1390376734-6800-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-23Merge commit 'spi/topic/sc18is602' into spi-linusMark Brown
2014-01-23Merge commit 'spi/fix/rcar' into spi-linusMark Brown
2014-01-23Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qspi', ↵Mark Brown
'spi/topic/s3c24xx', 'spi/topic/s3c64xx', 'spi/topic/sh', 'spi/topic/tegra114', 'spi/topic/tegra20-sflash', 'spi/topic/tegra20-slink', 'spi/topic/txx9' and 'spi/topic/xcomm' into spi-linus
2014-01-23Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/gpio', ↵Mark Brown
'spi/topic/hspi', 'spi/topic/mpc512x', 'spi/topic/msiof', 'spi/topic/nuc900', 'spi/topic/oc-tiny', 'spi/topic/omap', 'spi/topic/orion' and 'spi/topic/pci' into spi-linus
2014-01-23Merge remote-tracking branches 'spi/topic/bcm2835', 'spi/topic/bcm63xx', ↵Mark Brown
'spi/topic/bcm63xx-hsspi', 'spi/topic/bitbang', 'spi/topic/bpw', 'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/davinci', 'spi/topic/dw' and 'spi/topic/falcon' into spi-linus
2014-01-23Merge remote-tracking branches 'spi/fix/bcm63xx', 'spi/fix/dspi', ↵Mark Brown
'spi/fix/hspi', 'spi/fix/imx', 'spi/fix/msiof', 'spi/fix/pxa2xx', 'spi/fix/qspi', 'spi/topic/altera', 'spi/topic/ath79' and 'spi/topic/atmel' into spi-linus
2014-01-23Merge remote-tracking branch 'spi/topic/core' into spi-linusMark Brown
2014-01-23Merge remote-tracking branch 'spi/fix/core' into spi-linusMark Brown
2014-01-23ASoC: samsung: Fix Kconfig dependencySachin Kamat
Select S3C24XX_DMA instead of S3C2410_DMA to avoid following dependency issues and build errors: warning: (CPU_S3C2410 && CPU_S3C2442 && SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)) warning: (CPU_S3C2410 && CPU_S3C2442 && SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)) arch/arm/mach-s3c24xx/built-in.o: In function `s3c2410_dma_add': arch/arm/mach-s3c24xx/dma-s3c2410.c:134: undefined reference to `s3c2410_dma_init' arch/arm/mach-s3c24xx/dma-s3c2410.c:135: undefined reference to `s3c24xx_dma_order_set' arch/arm/mach-s3c24xx/dma-s3c2410.c:136: undefined reference to `s3c24xx_dma_init_map' arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops' sound/soc/samsung/s3c24xx-i2s.c:293: undefined reference to `s3c2410_dma_ctrl' arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops' arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops' sound/built-in.o: In function `s3c2412_i2s_trigger': sound/soc/samsung/s3c-i2s-v2.c:432: undefined reference to `s3c2410_dma_ctrl' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23ASoC: wm5100: Export wm5100_detectSachin Kamat
Export the symbol so that it is accessible to modules. Fixes the following error: ERROR: "wm5100_detect" [sound/soc/samsung/snd-soc-lowland.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23bcma: gpio: add own IRQ domainRafał Miłecki
Input GPIO changes can generate interrupts, but we need kind of ACK for them by changing IRQ polarity. This is required to stop hardware from keep generating interrupts and generate another one on the next GPIO state change. This code allows using GPIOs with standard interrupts and add for example GPIO buttons support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6216/
2014-01-23MIPS: include linux/types.hQais Yousef
The file uses u16 type but doesn't include its definition explicitly I was getting this error when including this header in my driver: arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’ Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6212/
2014-01-23MIPS: sead3: use unflatten_and_copy_device_tree()Qais Yousef
we want the device tree to be unflattened into non init memory so it can be accessed later by, for example, a probing function of a driver module. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6210/
2014-01-23MIPS: sead3: populate platform devices from device treeQais Yousef
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6209/
2014-01-23MIPS: sead3: remove chosen nodeQais Yousef
The defaults are not always applicable and it makes it hard for the bootloader to override them. By removing it we give the bootloader full control over what command line parameters to pass. Without this change we will need to modify the built-in dtb to add bootloader cmd line parameters or do some work to append them after we unflatten the device tree. Sead3 is a development board, that's why we want to be able to change boot parameters on the fly from the bootloader. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6208/
2014-01-23MIPS: sead3: allow cmdline/env to change memory size using memsize paramQais Yousef
if the user sets memsize parameter in commandline or bootloader environment, we use it to modify the built-in dtb memory size Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6207/
2014-01-23MIPS: BCM63XX: use linux/serial_bcm63xx.hFlorian Fainelli
Update the early_printk code to include linux/serial_bcm63xx.h which provides the definitions for the UART block registers. While at it, remove the inclusion of serial_bcm63xx.h which was just there to allow smooth transition. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6203/
2014-01-23tty: serial: bcm63xx_uart: use linux/serial_bcm63xx.hFlorian Fainelli
Now that the UART block defines have been moved to a separate file, include that one and do not longer rely on the MIPS-specific bcm63xx_regs.h header file. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6204/
2014-01-23MIPS: BCM63XX: move UART register definitionsFlorian Fainelli
Move the BCM63XX UART driver definitions to include/linux/serial_bcm63xx.h such that we do not rely on the MIPS BCM63XX code to provide these for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6202/
2014-01-23tty: serial: bcm63xx_uart: drop bcm_{readl,writel} macrosFlorian Fainelli
bcm_{readl,writel} macros expand to __raw_{readl,writel}, use these directly such that we do not rely on the platform to provide these for us. As a result, we no longer use bcm63xx_io.h, so remove that inclusion too. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6201/
2014-01-23tty: serial: bcm63xx_uart: remove unused inclusionFlorian Fainelli
bcm63xx_irqs.h is included but we are not using anything from it, drop that include. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6205/
2014-01-23MIPS: microMIPS: Remove unsupported compiler flag.Steven J. Hill
Remove usage of -mno-jals compiler flag when building a pure microMIPS kernel. The -mno-jals flag only ever existed within Mentor toolchains. Dropping this flag allows all FSF toolchains to work. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6200/
2014-01-23MIPS: OCTEON: Supply OCTEON+ USB nodes in internal device trees.David Daney
This will be needed by the next patch to use said nodes for probing via the device tree. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6185/
2014-01-23MIPS: Malta: use generic 8250 early consolePaul Burton
This patch switches Malta from using the MIPS implementation of early printk with Malta's prom_putchar to using the generic 8250_early implementation. This offers a couple of advantages: - We duplicate less generic code. - The UART can be initialised rather than being reliant upon inheriting a valid setup from the bootloader. The Malta console_config function is extended to initialise the early console if no earlycon= kernel parameter is provided, inheriting the modetty0 bootloader environment if present and falling back to a default 38400n8r setup if not. This matches the behaviour used for the regular console= parameter. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6183/
2014-01-23MIPS: Malta: mux & enable SERIRQ interruptPaul Burton
This patch causes the kernel to mux the SERIRQ interrupt to the SERIRQ pin of the PIIX4 and to enable that interrupt. The kernel depends upon the interrupt when using the SuperIO UARTs (ttyS0 & ttyS1) but previously would not configure it, instead relying upon the bootloader having done so. If that is not the case then the typical result is that the system appears to hang once it reaches userland as no output is displayed on the UART. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6182/
2014-01-23MIPS: Malta: initialise the RTC at bootPaul Burton
The RTC is used on Malta to estimate the clock frequency of the CPU & optionally the GIC. However the kernel previously did not initialise the RTC, instead relying upon the bootloader having done so. In order to minimise dependencies which the kernel has upon the bootloader this patch causes the kernel to initialise the RTC itself prior to making use of it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6184/
2014-01-23MIPS: sead3: remove unused cpu_khz variablePaul Burton
This variable seems to have been copied from Malta when SEAD3 support was introduced, but is likewise unused. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6172/
2014-01-23MIPS: Malta: remove unused cpu_khz variablePaul Burton
This variable was introduced by commit 96348c8f (of Ralf's historic Linux/MIPS repository) "Remaining fixes for MIPS's eval boards." but I don't see any use of it either then or now. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6171/
2014-01-23MIPS: cavium-octeon: export symbols needed by octeon-ethernetAaro Koskinen
Export symbols needed by the octeon-ethernet driver. The patch fixes a build failure with CONFIG_OCTEON_ETHERNET=m. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6166/
2014-01-23MIPS: Fix build error seen in some configurationsGuenter Roeck
The following build error is seen if CONFIG_32BIT is undefined, CONFIG_64BIT is defined, and CONFIG_MIPS32_O32 is undefined. asm/syscall.h: In function 'mips_get_syscall_arg': arch/mips/include/asm/syscall.h:32:16: error: unused variable 'usp' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: c0ff3c53d4f9 ('MIPS: Enable HAVE_ARCH_TRACEHOOK') Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6160/
2014-01-23MIPS: cavium-octeon: fix early boot hang on EBH5600 boardAaro Koskinen
The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is trying enumerate a non-existant interface. The actual hang happens in cvmx_helper_interface_get_mode(): mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); when interface == 4. We can avoid this situation by first checking that the interface exists in the DTB. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6101/
2014-01-23MIPS: cavium-octeon: fix out-of-bounds array accessAaro Koskinen
When booting with in-kernel DTBs, the pruning code will enumerate interfaces 0-4. However, there is memory reserved only for 4 so some other data will get overwritten by cvmx_helper_interface_enumerate(). Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6102/
2014-01-23MIPS: JZ4740: reuse UART0 address macro for vmlinuz debug portAntony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5927/
2014-01-23Merge remote-tracking branches 'regulator/topic/s2mps11', ↵Mark Brown
'regulator/topic/s5m8767', 'regulator/topic/stw481x-vmmc', 'regulator/topic/tps51632', 'regulator/topic/tps62360', 'regulator/topic/tps65910', 'regulator/topic/twl' and 'regulator/topic/wm831x' into regulator-linus
2014-01-23Merge remote-tracking branches 'regulator/topic/db8500', ↵Mark Brown
'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus
2014-01-23Merge remote-tracking branches 'regulator/fix/pfuze100', ↵Mark Brown
'regulator/fix/s5m8767', 'regulator/topic/ab8500', 'regulator/topic/act8865', 'regulator/topic/anatop', 'regulator/topic/arizona' and 'regulator/topic/as3722' into regulator-linus
2014-01-23Merge remote-tracking branch 'regulator/topic/core' into regulator-linusMark Brown
2014-01-23regulator: pfuze100-regulator: Improve dev_info() messageFabio Estevam
'lay' is not very meaningful, so use it 'layer' instead to let the dev_info() clearer. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23drm/i915: VLV2 - Fix hotplug detect bitsTodd Previte
Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by: Todd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-23ALSA: Refactor slot assignment codeTakashi Iwai
There are two loops that are almost identical but only with different checks. Refactor them with a simple helper, and give a bit more comments what's doing there. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23Merge tag 'kvm-s390-20140117' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-queue This deals with 2 guest features that need enablement in the kvm host: - transactional execution - lpp sampling support In addition there is also a fix to the virtio-ccw guest driver. This will enable future features
2014-01-23ALSA: bits vs bytes bug in snd_card_create()Dan Carpenter
The test here is intended intended to prevent shift wrapping bugs when we do "1U << idx2". We should consider the number of bits in a u32 instead of the number of bytes. [fix another chunk similarly by tiwai] Fixes: 7bb2491b35a2 ('ALSA: Add kconfig to specify the max card numbers') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23ore: Fix wrong math in allocation of per device BIOBoaz Harrosh
At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE CC: Stable Kernel <stable@vger.kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-01-22Merge branch 'ip-roce' into for-nextRoland Dreier
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-22Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-22IB/mlx5: Verify reserved fields are clearedEli Cohen
Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Remove old field for create mkey mailboxEli Cohen
Match firmware specification. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Abort driver cleanup if teardown hca failsEli Cohen
Do not continue with cleanup flow. If this ever happens we can check which resources remained open. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Allow creation of QPs with zero-length work queuesEli Cohen
The current code attmepts to call ib_umem_get() even if the length is zero, which causes a failure. Since the spec allows zero length work queues, change the code so we don't call ib_umem_get() in those cases. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-18 08:59:25 +0000