| Age | Commit message (Collapse) | Author |
|---|
|
`comedi_auto_config()` is usually called from the probe routine of a
low-level comedi driver to allocate and auto-configure a comedi device.
Part of this involves calling the low-level driver's `auto_attach()`
handler, and if that is successful, `comedi_device_postconfig()` tries
to complete the configuration of the comedi device. If either of those
fail, `comedi_device_detach()` is called to clean up, and
`comedi_release_hardware_device()` is called to remove the dynamically
allocated comedi device.
Unfortunately, `comedi_device_detach()` clears the `hw_dev` member of
the `struct comedi_device` (indirectly via `comedi_clear_hw_dev()`), and
that stops `comedi_release_hardware_device()` finding the comedi device
associated with the hardware device, so the comedi device won't be
removed properly.
Since `comedi_release_hardware_device()` also calls
`comedi_device_detach()` (assuming it finds the comedi device associated
with the hardware device), the fix is to remove the direct call to
`comedi_device_detach()` from `comedi_auto_config()` and let the call to
`comedi_release_hardware_device()` take care of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should be returning -ENOMEM here instead of zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To behave the same way as the old request path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Make blk-mq handle the dma_drain_size field the same way as the old request
path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
__blk_put_request needs to call into the blk-mq code just like
blk_put_request. As we don't have the queue lock in this case both
end up calling the same function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This is neede for proper SG_IO operation as well as various uses of
blk_execute_rq from the SCSI midlayer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Handling redirect replies requires both map_sem and request_mutex.
Taking map_sem unconditionally near the top of handle_reply() avoids
possible race conditions that arise from releasing request_mutex to be
able to acquire map_sem in redirect reply case. (Lock ordering is:
map_sem, request_mutex, crush_mutex.)
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
Factor out logic from ceph_osdc_start_request() into a new helper,
__ceph_osdc_start_request(). ceph_osdc_start_request() now amounts to
taking locks and calling __ceph_osdc_start_request().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
|
|
Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED. If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.
So, treat an unexpected backend CLOSED state the same as CLOSING.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
This was wrongly introduced in commit 402b27f9, the only difference
between blkif_request_segment_aligned and blkif_request_segment is
that the former has a named padding, while both share the same
memory layout.
Also correct a few minor glitches in the description, including for it
to no longer assume PAGE_SIZE == 4096.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
[Description fix by Jan Beulich]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Matt Rushton <mrushton@amazon.com>
Cc: Matt Wilson <msw@amazon.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Introduce a new variable to keep track of the number of in-flight
requests. We need to make sure that when xen_blkif_put is called the
request has already been freed and we can safely free xen_blkif, which
was not the case before.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Matt Rushton <mrushton@amazon.com>
Reviewed-by: Matt Rushton <mrushton@amazon.com>
Cc: Matt Wilson <msw@amazon.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
I've at least identified two possible memory leaks in blkback, both
related to the shutdown path of a VBD:
- blkback doesn't wait for any pending purge work to finish before
cleaning the list of free_pages. The purge work will call
put_free_pages and thus we might end up with pages being added to
the free_pages list after we have emptied it. Fix this by making
sure there's no pending purge work before exiting
xen_blkif_schedule, and moving the free_page cleanup code to
xen_blkif_free.
- blkback doesn't wait for pending requests to end before cleaning
persistent grants and the list of free_pages. Again this can add
pages to the free_pages list or persistent grants to the
persistent_gnts red-black tree. Fixed by moving the persistent
grants and free_pages cleanup code to xen_blkif_free.
Also, add some checks in xen_blkif_free to make sure we are cleaning
everything.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Matt Rushton <mrushton@amazon.com>
Reviewed-by: Matt Rushton <mrushton@amazon.com>
Cc: Matt Wilson <msw@amazon.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Currently shrink_free_pagepool() is called before the pages used for
persistent grants are released via free_persistent_gnts(). This
results in a memory leak when a VBD that uses persistent grants is
torn down.
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xen.org
Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Matt Rushton <mrushton@amazon.com>
Signed-off-by: Matt Wilson <msw@amazon.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The changes introduced in commit 4b1a25f06b30b203 ("fix build when
CONFIG_UIDGID_STRICT_TYPE_CHECKS is on") got the UID check the wrong way
around, leading to "Permission denied" when a regular user attempts to
retrieve his quota (lfs quota -u ...) but allowing him to retrieve other
users quota.
Full details at: https://jira.hpdd.intel.com/browse/LU-4530
Cc: Peng Tao <tao.peng@emc.com>
Cc: <stable@vger.kernel.org> # 3.12.x
Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: Cédric Dufour <cedric.dufour@idiap.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a race condition
Assume we have *one* sync_fence object, with *one* sync_pt
which belongs to *one* sync_timeline, given this condition,
sync_timeline->kref will have two counts, one for sync_timeline
(implicit) and another for sync_pt.
Assume following is the situation on CPU
Theead-1 : (Thread which calls sync_timeline_destroy())
-> (some function calls)
-> sync_timeline_destory()
-> sync_timeline_signal() (CPU is inside this
function after putting reference to sync_timeline)
At this time Thread-2 comes and does following
Thread-2 : (fclose on fence fd)
> sync_fence_release() -> because of fclose() on fence object
-> sync_fence_free()
-> sync_pt_free()
-> kref_put(&pt->parent->kref, sync_timeline_free);
-> sync_timeline_free() (CPU is inside this because
this time kref will be zero after _put)
Thread-2 will free sync_timeline object before Thread-1
has finished its work inside sync_timeline_signal.
With this change we signals all sync_pt before putting
reference to sync_timeline object.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
[jstultz: minor commit subject tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last value written to a analog output channel is cached in the
private data of this driver for readback.
Currently, the wrong value is cached in the (*insn_write) functions.
The current code stores the data[n] value for readback afer the loop
has written all the values. At this time 'n' points past the end of
the data array.
Fix the functions by using a local variable to hold the data being
written to the analog output channel. This variable is then used
after the loop is complete to store the readback value. The current
value is retrieved before the loop in case no values are actually
written..
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should cap the SSID length at NDIS_802_11_LENGTH_SSID (32) characters
to avoid memory corruption. If the SSID is too long then I have opted
to ignore it instead of truncating it.
We don't need to clear bssid->Ssid.Ssid[0] because this struct is
allocated with rtw_zmalloc()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Error handling code in gdm_usb_probe() misses to deallocate
tx_ and rx_structs and to do usb_put_dev().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
FPGA implementations of the Cortex-A57 and Cortex-A53 are now available
in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for
Versatile Express. As these attach to a Motherboard Express V2M-P1 it
would be useful to have support for some V2M-P1 peripherals enabled by
default.
Additionally a couple of of features have been introduced since the last
defconfig update (CMA, jump labels) that would be good to have enabled
by default to ensure they are build and boot tested.
This patch updates the arm64 defconfig to enable support for these
devices and features. The arm64 Kconfig is modified to select
HAVE_PATA_PLATFORM, which is required to enable support for the
CompactFlash controller on the V2M-P1.
A few options which don't need to appear in defconfig are trimmed:
* BLK_DEV - selected by default
* EXPERIMENTAL - otherwise gone from the kernel
* MII - selected by drivers which require it
* USB_SUPPORT - selected by default
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This reverts commit b73db54750482cf3910046c82a84ce8c1684dfbe.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Rashika Kheria <rashika.kheria@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If net_dev is NULL memcpy() will Oops.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When attach fails due to unsupported and/or invalid bus speed, the message
vhci_hcd prints out doesn't include any useful information as to what caused
the failure. Change the message to be informative and use usb_speed_string()
to get the right speed string from usb common.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Linus Torvalds writes:
It causes an interesting warning for me:
drivers/staging/rtl8821ae/rtl8821ae/dm.c: In function
‘rtl8821ae_dm_clear_txpower_tracking_state’:
drivers/staging/rtl8821ae/rtl8821ae/dm.c:487:31: warning: iteration 2u
invokes undefined behavior [-Waggressive-loop-optimizations]
rtldm->bb_swing_idx_ofdm[p] = rtldm->default_ofdm_index;
^
drivers/staging/rtl8821ae/rtl8821ae/dm.c:485:2: note: containing loop
for (p = RF90_PATH_A; p < MAX_RF_PATH; ++p) {
^
and gcc is entirely correct: that loop iterates from 0 to 3, and does this:
rtldm->bb_swing_idx_ofdm[p] = rtldm->default_ofdm_index;
but the bb_swing_idx_ofdm[] array only has two members. So the last
two iterations will overwrite bb_swing_idx_ofdm_current and the first
entry in bb_swing_idx_ofdm_base[].
Now, the bug does seem to be benign: bb_swing_idx_ofdm_current isn't
actually ever *used* as far as I can tell, and the first entry of
bb_swing_idx_ofdm_base[] will have been written with that same
"rtldm->default_ofdm_index" value.
But gcc is absolutely correct, and that driver needs fixing.
I've pulled it and will let it be because it doesn't seem to be an
issue in practice, but please fix it. The obvious fix would seem to
change the size of "2" to be "MAX_RF_PATH", but I'll abstain from
doing those kinds of changes in the merge when it doesn't seem to
affect the build or functionality).
Reported-By: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extract clocking parameters from the device tree, and remove now dead
code and types.
Signed-off-by: David Daney <david.daney@cavium.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel to userspace communication routines (KUC) allocate
and limit the maximum cs_buf size to CR_MAXSIZE. However this
fails to account for the fact that the buffer is assumed to begin
with a struct kuc_hdr. To allocate and account for that space,
we introduce a new define, KUC_CHANGELOG_MSG_MAXSIZE.
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/7406
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3587
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CR_MAXSIZE needs to account for an llog_changelog_rec that actually
contains a changelog_ext_rec structure rather than a changelog_rec.
With out doing so, a file size approaching the Linux kernel NAME_MAX
length that is renamed to a size also close to, or at, NAME_MAX will
exceed CR_MAXSIZE and trip an assertion.
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/6993
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3587
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call to ksocknal_launch_packet might schedule a callback that
might free the just sent message, and so subsequent access to it
via lntmsg->msg_vmflush goes to freed memory.
Instead we'll just remember if we are in the vmflush thread and
only restore if we happened to set mempressure flag.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/8667
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4360
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The get/set ACL xattr support for CIFS ACLs attempts to send old
cifs dialect protocol requests even when mounted with SMB2 or later
dialects. Sending cifs requests on an smb2 session causes problems -
the server drops the session due to the illegal request.
This patch makes CIFS ACL operations protocol specific to fix that.
Attempting to query/set CIFS ACLs for SMB2 will now return
EOPNOTSUPP (until we add worker routines for sending query
ACL requests via SMB2) instead of sending invalid (cifs)
requests.
A separate followon patch will be needed to fix cifs_acl_to_fattr
(which takes a cifs specific u16 fid so can't be abstracted
to work with SMB2 until that is changed) and will be needed
to fix mount problems when "cifsacl" is specified on mount
with e.g. vers=2.1
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
CC: Stable <stable@kernel.org>
|
|
Changeset 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 added protocol
operations for get/setxattr to avoid calling cifs operations
on smb2/smb3 mounts for xattr operations and this changeset
adds the calls to cifs specific protocol operations for xattrs
(in order to reenable cifs support for xattrs which was
temporarily disabled by the previous changeset. We do not
have SMB2/SMB3 worker function for setting xattrs yet so
this only enables it for cifs.
CCing stable since without these two small changsets (its
small coreq 666753c3ef8fc88b0ddd5be4865d0aa66428ac35 is
also needed) calling getfattr/setfattr on smb2/smb3 mounts
causes problems.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
CC: Stable <stable@kernel.org>
|
|
Recent commit 175f5475fb9c5800319da4e3c4204413d7280f5c
introduced this compile warning (because vaddr is unsigned long),
so add a cast:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function ‘kiblnd_kvaddr_to_page’:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:532:2: warning: passing argument 1 of ‘is_vmalloc_addr’ makes pointer from integer without a cast [enabled by default]
if (is_vmalloc_addr(vaddr)) {
^
In file included from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h:43:0,
from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:41:
include/linux/mm.h:336:59: note: expected ‘const void *’ but argument is of type ‘long unsigned int’
static inline int is_vmalloc_addr(const void *x)
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
CC: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other
flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an
atomic allocation, the code must test __GFP_WAIT flag presence.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add #include <linux/device.h> to fix the following warning seen
with gcc 4.7.3:
In file included from drivers/staging/android/ion/ion_heap.c:26:0:
drivers/staging/android/ion/ion_priv.h:358:21: warning: ‘struct device’ declared inside parameter list [enabled by default]
drivers/staging/android/ion/ion_priv.h:358:21: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The compat ioctl for ION_IOC_FREE currently passes allocation data
instead of the free data. Correct this.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[jstultz: Folded in a small build fix]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a few bugs in ion_system_heap:
Initialize the list node in the info block.
Don't store size_remaining in a signed long, allocating >2GB
could overflow, resulting in a call to sg_alloc_table with
nents=0 which panics. alloc_largest_available will never
return a block larger than size_remanining, so it can never
go negative.
Limit a single allocation to half of all memory. Prevents a
large allocation from taking down the whole system.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: Minor commit subject tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid holding ashmem_mutex across code that can page fault. Page faults
grab the mmap_sem for the process, which are also held by mmap calls
prior to calling ashmem_mmap, which locks ashmem_mutex. The reversed
order of locking between the two can deadlock.
The calls that can page fault are read() and the ASHMEM_SET_NAME and
ASHMEM_GET_NAME ioctls. Move the code that accesses userspace pages
outside the ashmem_mutex.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
[jstultz: minor commit message tweaks]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before this change, a timeline would only be removed from the timeline
list *after* the sync driver had its release_obj() called. However, the
driver's release_obj() may free resources needed by print_obj().
Although the timeline list is locked when print_obj() is called, it is
not locked when release_obj() is called. If one CPU was in print_obj()
when another was in release_obj(), the print_obj() may make unsafe
accesses.
It is not actually necessary to hold the timeline list lock when calling
release_obj() if the call is made after the timeline is unlinked from
the list, since there is no possibility another thread could be in --
or enter -- print_obj() for that timeline.
This change moves the release_obj() call to after the timeline is
unlinked, preventing the above race from occurring.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Alistair Strachan <alistair.strachan@imgtec.com>
[jstultz: minor commit subject tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add stubs for kernels without CONFIG_SW_SYNC
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
[jstultz: resolved minor conflict, tweaked commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ION_DUMMY option is bool, and hence this code is either
present or absent. It will never be modular, so using
module_init as an alias for __initcall is rather misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.
Cc: Colin Cross <ccross@android.com>
Cc: Jesse Barker <jesse.barker@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
use ARRAY_SIZE to count number of heaps in static array
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Need add "linux/io.h" to pass compiling under metag architecture with
allmodconfig (which use the default 'virt_to_phys'), the related error:
CC drivers/staging/android/ion/ion_dummy_driver.o
drivers/staging/android/ion/ion_dummy_driver.c: In function 'ion_dummy_init':
drivers/staging/android/ion/ion_dummy_driver.c:81: error: implicit declaration of function 'virt_to_phys'
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 3.14 cycle.
Included is the patch previously set as the fourth round for 3.13 which was
to late to be appropriate.
* Another endian fix (ad799x adc) due to missuse of the IIO_ST macro (which
is going away very shortly)
* A reversed error check in ad5933 which will make the probe fail.
* A buffer overflow in the example code in the documentation.
* ad799x was freeing an irq that might or might not have been requested.
* tsl2563 was checking the wrong element of chan_spec for modifiers. Thus some
sysfs reads would give the wrong values.
* A missing dependency on HAS_IOMEM in spear_adc and lpc32xx was causing some
test build failures (on s390 and perhaps elsewhere).
I also have a few fixes queued up for things that went in during the 3.14
merge window which will follow as a separate pull request (to avoid rebasing
my tree).
|
|
It makes no sense to inline a rarely used function meant for debugging
only that is called a total of five times in the main evaluation loop.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
cbnz/tbnz don't update the condition flags, so remove the "cc" clobbers
from inline asm blocks that only use these instructions to implement
conditional branches.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Linux requires a number of atomic operations to provide full barrier
semantics, that is no memory accesses after the operation can be
observed before any accesses up to and including the operation in
program order.
On arm64, these operations have been incorrectly implemented as follows:
// A, B, C are independent memory locations
<Access [A]>
// atomic_op (B)
1: ldaxr x0, [B] // Exclusive load with acquire
<op(B)>
stlxr w1, x0, [B] // Exclusive store with release
cbnz w1, 1b
<Access [C]>
The assumption here being that two half barriers are equivalent to a
full barrier, so the only permitted ordering would be A -> B -> C
(where B is the atomic operation involving both a load and a store).
Unfortunately, this is not the case by the letter of the architecture
and, in fact, the accesses to A and C are permitted to pass their
nearest half barrier resulting in orderings such as Bl -> A -> C -> Bs
or Bl -> C -> A -> Bs (where Bl is the load-acquire on B and Bs is the
store-release on B). This is a clear violation of the full barrier
requirement.
The simple way to fix this is to implement the same algorithm as ARMv7
using explicit barriers:
<Access [A]>
// atomic_op (B)
dmb ish // Full barrier
1: ldxr x0, [B] // Exclusive load
<op(B)>
stxr w1, x0, [B] // Exclusive store
cbnz w1, 1b
dmb ish // Full barrier
<Access [C]>
but this has the undesirable effect of introducing *two* full barrier
instructions. A better approach is actually the following, non-intuitive
sequence:
<Access [A]>
// atomic_op (B)
1: ldxr x0, [B] // Exclusive load
<op(B)>
stlxr w1, x0, [B] // Exclusive store with release
cbnz w1, 1b
dmb ish // Full barrier
<Access [C]>
The simple observations here are:
- The dmb ensures that no subsequent accesses (e.g. the access to C)
can enter or pass the atomic sequence.
- The dmb also ensures that no prior accesses (e.g. the access to A)
can pass the atomic sequence.
- Therefore, no prior access can pass a subsequent access, or
vice-versa (i.e. A is strictly ordered before C).
- The stlxr ensures that no prior access can pass the store component
of the atomic operation.
The only tricky part remaining is the ordering between the ldxr and the
access to A, since the absence of the first dmb means that we're now
permitting re-ordering between the ldxr and any prior accesses.
From an (arbitrary) observer's point of view, there are two scenarios:
1. We have observed the ldxr. This means that if we perform a store to
[B], the ldxr will still return older data. If we can observe the
ldxr, then we can potentially observe the permitted re-ordering
with the access to A, which is clearly an issue when compared to
the dmb variant of the code. Thankfully, the exclusive monitor will
save us here since it will be cleared as a result of the store and
the ldxr will retry. Notice that any use of a later memory
observation to imply observation of the ldxr will also imply
observation of the access to A, since the stlxr/dmb ensure strict
ordering.
2. We have not observed the ldxr. This means we can perform a store
and influence the later ldxr. However, that doesn't actually tell
us anything about the access to [A], so we've not lost anything
here either when compared to the dmb variant.
This patch implements this solution for our barriered atomic operations,
ensuring that we satisfy the full barrier requirements where they are
needed.
Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The 'active' sysfs attribute should refer to the currently active tty
devices the console is running on, not the currently active console.
The console structure doesn't refer to any device in sysfs, only the tty
the console is running on has. So we need to print out the tty names in
'active', not the console names.
This resolves an issue on s390 platforms in determining the correct
console device to use.
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Werner Fink <werner@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
3GPP TS 07.10 states in section 5.4.6.3.7:
"The length byte contains the value 2 or 3 ... depending on the break
signal." The break byte is optional and if it is sent, the length is
3. In fact the driver was not able to work with modems that send this
break byte in their modem status control message. If the modem just
sends the break byte if it is really set, then weird things might
happen.
The code for deconding the modem status to the internal linux
presentation in gsm_process_modem has already a big comment about
this 2 or 3 byte length thing and it is already able to decode the
brk, but the code calling the gsm_process_modem function in
gsm_control_modem does not encode it and hand it over the right way.
This patch fixes this.
Without this fix if the modem sends the brk byte in it's modem status
control message the driver will hang when opening a muxed channel.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HVC_OPAL/RTAS/UDBG/XEN options are all bool, and hence their support
is either present or absent. It will never be modular, so using
module_init as an alias for __initcall is rather misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.
Also the __exitcall functions have been outright deleted since
they are only ever of interest to UML, and UML will never be
using any of this code.
Cc: Richard Weinberger <richard@nod.at>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Kconfig symbol MAX_RAW_DEVS is meant to be between 1 and 65536. But
those boundaries are not enforced by its Kconfig entry.
Note that MAX_RAW_DEVS is used to set MAX_RAW_MINORS in
drivers/char/raw.c. If one would accidentally set MAX_RAW_DEVS to an
invalid value, that invalid value will actually end up being used in
raw_init().
So add an appropriate range to this Kconfig entry.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
