summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-01-21ASoC: wm8985 Don't directly reference the cache data structureMark Brown
In preparation for conversion to regmap. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Use standard cache sync implementationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Convert to table based DAPM and control initMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: Add external amplifier controls for Visstrim_M10.Javier Martin
Visstrim_M10 has an external class D amplifier. This patch provides support for controlling the 4 possible gain levels and per channel muting. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: Fix build of tlv320dac33Mark Brown
The problem was introduced due to the obscure formatting some of the older drivers use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: Use regmap update bits operation for drivers using regmapMark Brown
If a driver is using regmap directly ensure that we're coherent with non-ASoC register updates by using the regmap API directly to do our read/modify/write cycles. This will bypass the ASoC cache but drivers using regmap directly should not be using the ASoC cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: Don't tell applications about msbits unless we're ignoring inputMark Brown
On the off chance that an application both pays attention and gets confused. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Push WM5100 interrupt request into I2C probeMark Brown
This is more what the device model wants us to do and will allow use by non-audio functions before the audio part of the device has come up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make WM5100 interrupt path use regmap directlyMark Brown
This will allow us to move the interrupt allocation out of the ASoC part of the driver and simplifies the locking by removing any reliance in the bulk of the interrupt path on the big CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Remove redundant set_bias_level() from WM5100 remove()Mark Brown
The framework should bring the device down before it calls the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: omap-mcpdm: Set 24msbits constraintPeter Ujfalusi
McPDM internal FIFO is 24 bit wide. From the 32 bit sample 8 bit is discarded. Let application know about this via msbits constraint. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: omap-dmic: Use core to set the msbits constraintPeter Ujfalusi
Core can set the msbits constraint in behalf of the dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: twl4030: Use core to set the msbits constraintPeter Ujfalusi
Core can set the msbits constraint in behalf of the dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: tlv320dac33: Use core to set the msbits constraintPeter Ujfalusi
Core can set the msbits constraint in behalf of the dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: sgtl5000: Print revision number in hexFabio Estevam
Throughout the sgtl5000 driver source code and also in the sgtl5000 datasheet the revision code is shown in hexadecimal. Print it hex format, for consistency. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Say we can't read WM5100 ID registerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: When releasing WM5100 put /RESET into resetMark Brown
Reset is active low, make sure we leave it asserted when release the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: 24 bits are significant on wm_hubs DAIsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make WM8993 I2C usage unconditionalMark Brown
The WM8993 only supports I2C so don't ifdef the I2C support in the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Implement basic WM8993 interrupt supportMark Brown
If an interrupt is supplied then use it for thermal warning and FLL lock notifications. When using the interrupt raise the timeout for the FLL lock substantially to reduce the chances of spurious warnings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: 24 bits are significant on the WM8996 audio interfacesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Allow drivers to specify how many bits are significant on a DAIMark Brown
Most devices accept data in formats that don't correspond directly to their internal format. ALSA allows us to set a msbits constraint which tells userspace about this in case it finds it useful (for example, in order to avoid wasting effort dithering bits that will be ignored when raising the sample size of data) so provide a mechanism for drivers to specify the number of bits that are actually significant on a DAI and add the appropriate constraints along with all the others. This is done slightly awkwardly as the constraint is specified per sample size - we loop over every possible sample size, including ones that the device doesn't support and including ones that have fewer bits than are actually used, but this is harmless as the upper layers do the right thing in these cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-20ASoC: Add WM8962 DAC and ADC L/R swap supportMark Brown
Simple switches since there's no per-channel control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: wm8983: Remove useless snd_kcontrolDimitris Papastamos
This must be a leftover from a previous driver. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: jz4740: Convert qi_lb60 to use snd_soc_register_card()Axel Lin
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert WM8962 register access map to modern styleMark Brown
Much more compact, both in terms of source and especially in terms of RAM used at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Route Mic Bias in Visstrim_M10 board.Javier Martin
Visstrim_M10 board uses an external microphone that can be enabled/disabled by the user Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ep93xx: Don't use system controller defines in audio driversRyan Mallon
Both the Snapper CL15 and EDB93xx audio drivers set the same audio configuration in ep93xx_i2s_acquire. Remove the arguments to ep93xx_i2s_acquire so that the audio drivers no longer need the EP93XX_SYSCON defines exported. Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make WM8962 I2C usage unconditionalMark Brown
We only support I2C so no need to ifdef. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: CQ93VC: remove machine specific header file inclusion from codec driverManjunath Hadli
remove unnecessary inclusion of machine specific header file mach/dm365.h from cq93vc.c voice codec driver which comes in the way of platform code consolidation. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: utils - Add support for a dummy codec driver.Liam Girdwood
This is useful to create dummy codec devices where we need to have some DAI links without a real Codec. e.g. could be used to represent dumb FM, MODEM, etc This is also used by dynamic PCM for DAI links that have no codec. Signed-off-by: Liam Girdwood <lrg@ti.com> [Fixed the indentation -- broonie] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: twl6040 - add method to query HS DC offset step size in mVLiam Girdwood
Provide a method for mach drivers to query the HS DC offset step size in mV. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Optimise performance of WM8904 ADC 128fs OSR modeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: core - Improve card registration error messaging for large DAI links.Liam Girdwood
Print out the offending DAI link entry when a naming error occurs. Makes thing easier to debug for machines with a large number of DAI links. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: replace 0xffffffff with DMA_BIT_MASK macroJoachim Eastwood
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: use proper defines for stream directions in pcm enginesJoachim Eastwood
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert WM8955 to table based DAPM and control initMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert WM8955 to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Use standard register cache sync for WM8955Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert WM8955 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make I2C usage unconditional in WM8955Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert WM8940 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make I2C usage unconditional in WM8940Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert WM8904 to direct regmap API usageMark Brown
The device has a very sparse register map so should benefit from using a rbtree cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Use standard cache sync for WM8904Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert wm8904 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make WM8904 I2C usage unconditionalMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert wm8804 to direct regmap API usageMark Brown
The register map for this device is actually fairly sparse so the rbtree should be beneficial. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Convert wm8804 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-23 19:45:50 +0000