summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-06-06brcm80211: brcmsmac: fixed checkpatch and sparse warningsChris Yungmann
Fixed checkpatch and sparse warnings related to aiutils.* Signed-off-by: Chris Yungmann <yungmann.chris@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06cfg80211: validate remain-on-channel time betterJohannes Berg
The remain-on-channel time validation shouldn't depend on the value of HZ, as it does now with the check against jiffies, since then you might use a value that works on one system but not on another. Fix it by checking against a minimum that's fixed. Also add validation of the wait duration for a management frame TX since this also translates into remain-on-channel internally. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ssb: recognize ARM Cortex M3Hauke Mehrtens
I found this core on a BCM4322, a PCI card in the Linksys WRT610N V1. This core is not used by the driver, this patch just makes ssb show the correct name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06mac80211: Clear wowlan flag when drv_suspend returns failurePontus Fuchs
drv_resume can get called without a prior call to drv_suspend. Consider the following steps: 1. Suspend is started but driver's drv_suspend returns error. 2. Suspend is aborted. local->wowlan flag is left set. 3. Interface is removed. 4. Suspend again. This time open_count is 0 so drv_suspend is not called and local->wowlan not cleared. 5. On resume ieee80211_reconfig will call drv_resume since local->wowlan is set. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06mac80211: Add missing mesh parameter dot11MeshForwarding for debugfsChun-Yeow Yeoh
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06mac80211: print info when disabling HTJohannes Berg
Make mac80211 print a message when it disables HT due to the connection using WEP/TKIP or due to the AP not supporting WMM/QoS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06mac80211: configure 11b/g channel access rules for legacy APsStanislaw Gruszka
For each EDCA TX queue change default settings (in STA mode) to conform old 802.11b/g channel access rules. This is needed for drivers that do not have QoS enable/disable "switch" (like rt2x00) to make them work properly with legacy APs. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ath9k: Ensure a fair beacon distribution in IBSS modeVivek Natarajan
Configure CWmin based on slot time for IBSS mode. This helps in increasing the beacon distribution of ath9k to accepted levels in 11a mode. Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06rt2x00:Add RT5392 chipset supportZero.Lin
Signed-off-by: Zero.Lin <Zero.Lin@mediatek.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06iwl4965: claim RSN IBSS supportStanislaw Gruszka
Similar like other drivers including iwl3945, do not configure group keys to the hardware (on Ad-Hoc mode) to make IBSS RSN work. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06rt2x00: claim RSN IBSS supportStanislaw Gruszka
Similar like other drivers, do not configure group keys to the hardware (on Ad-Hoc mode) to make IBSS RSN work. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ath9k: fix/add bits for spectral scanningZefir Kurtisi
Updates for spectral scanning register modification for AR93x: * fix bits for spectral_scan_count * add bits for new parameters Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06rfkill: Add the capability to switch all devices of all type in ↵Alex Hung
__rfkill_switch_all(). __rfkill_switch_all() switches the state of devices of a given type; however, it does not switch devices of all type (RFKILL_TYPE_ALL). As a result, it ignores the keycode "KEY_RFKILL" from another module, i.e. eeepc-wmi. This fix is to make __rfkill_switch_all() to be able to switch not only devices of a given type but also all devices. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-drv.c
2012-06-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2012-06-05net/wireless: ipw2200: introduce ipw_read_eeprom functionStanislav Yakovlev
We separate reading of device's eeprom content from writing it back to the device's sram. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAPAvinash Patil
mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mwifiex: invalidate bss config before setting channel for uAPAvinash Patil
Mark bss_config parameters as invalid before setting AP channel. This prevents from setting invalid parameters while setting AP channel to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to join_mesh functionJohannes Berg
Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: disallow setting channel on WDS interfacesJohannes Berg
If it worked (Felix says it doesn't right now), the typical use-case for WDS interfaces would be to be slaved to AP mode interfaces. Therefore, it isn't necessary to set the channel on WDS interfaces. As they don't support powersave or anything like that, they also couldn't use a different channel anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to start_ap functionJohannes Berg
Instead of setting the channel first and then starting the AP, let cfg80211 store the channel and provide it as one of the AP settings. This means that now you have to set the channel before you can start an AP interface, but since hostapd/wpa_supplicant always do that we're OK with this change. Alternatively, it's now possible to give the channel as an attribute to the start-ap nl80211 command, overriding any preset channel. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: simplify cfg80211_can_beacon_sec_chan APIJohannes Berg
Change cfg80211_can_beacon_sec_chan() to return true if there is no secondary channel to simplify all the current users of it. They all check the channel type before calling the function because it returns false if there's no secondary channel. Also actually document the return value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: move ieee80211_set_channel functionJohannes Berg
Move the set_channel function up so it can be used by other code in this file in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: clean up ieee80211_set_channelJohannes Berg
There's no need for ieee80211_set_channel to check whether a change in configuration happened since ieee80211_hw_config() auto-detects it. Additionally, it's wrong to pretend the HT config for the BSS changed, it didn't, the BSS can't be up & running (AP beaconing etc.) when the channel type is changed anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: simplify association HT parametersJohannes Berg
Instead of passing around the entire HT information IE, extract only the HT parameters field and disable HT if the HT information IE isn't present and well- formed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: deprecate CFG80211_WEXTJohannes Berg
Almost all wireless tools have transitioned to or at least added compatibility with nl80211 so there's no real need for CONFIG_CFG80211_WEXT any more. Mark it for removal, and also change the default to not be enabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05wireless: remove wext sysfsJohannes Berg
The only user of this was hal prior to its 0.5.12 release which happened over two years ago, so I'm sure this can be removed without issues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: add debugging to shadow registers and fix typoMeenakshi Venkataraman
Add a debugging log when using shadow registers. Also fix a minor typo in this connection. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: clean up coding style in PCIe transportJohannes Berg
Mostly clean up indentation around parentheses after if, function calls, etc. and also a few unneeded line breaks and some other things. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: move notification wait into coreJohannes Berg
This code is a library to be used by multiple opmodes, so move it into the iwlwifi module. Reviewed-by: Donald H Fry <donald.h.fry@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: implement dynamic opmode loadingDon Fry
This is the next step in splitting up the driver, making the uCode API dependent pieces of it live in separate modules. Right now there's only one so it's not user-selectable, but we're actively working on more. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: move IWL_CMD_FAILED_MSKJohannes Berg
This is common, not uCode API specific, so move it to the transport together with the command header struct definition. Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Guy Cohen <guy.cohen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: properly handle device_set_wakeup_enableJohannes Berg
This is intended to be set whenever wakeup will be needed upon suspend, not only when suspending, so use the new callbacks to set it then. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: Move IWL_MASK macro to transport.Gregory Greenman
This macro is needed by other transports besides PCIe, thus moving to a common location. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: s/iwlagn_unmap_tfd/iwl_unmap_tfdEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: s/iwlagn_txq_free_tfd/iwl_txq_free_tfdEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: add __printf argument checkingJohannes Berg
Joe Perches suggested adding the __printf attribute to the __iwl_dbg function to check arguments; add it to all of the logging functions (err, warn, info, dbg and crit.) Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: fix debug print in iwl_sta_calc_ht_flagsMeenakshi Venkataraman
We missed passing an argument to the debug print. Fix it. Cc: stable@kernel.org Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: fix prints in iwl_rx_handleEmmanuel Grumbach
The debug prints were wrong and buggy. The HW pointer wasn't printed correctly, it was mixed up with the pointer to the rxbuf. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05rt2x00: Add support for RT5360 based PCI devices.villacis@palosanto.com
This chip is used at least by the D-Link DWA-525 adapter. Signed-off-by: Alex Villac<ED>s Lasso <a_villacis@palosanto.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: remove ieee80211_get_operstate()Eliad Peller
ieee80211_get_operstate() was used by drivers in order to know whether the sta link is up, but it's no longer needed (nor used) as mac80211 notifies the drivers about authorization changes (via the sta_state callback) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05ath9k: Support ethtool getstats api.Ben Greear
This returns many of the values that formerly could only be obtained from debugfs. This should be an improvement when trying to access these counters programatically. Currently this support is only enabled when DEBUGFS is enabled because otherwise these stats are not accumulated. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05net: mac80211: Add and use ibss_vdbg debugging macroJoe Perches
Simplify the use of #ifdef CONFIG_MAC80211_IBSS_DEBUG/#endif by adding a logging macro to encapsulate the test. Convert the appropriate uses too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05net: mac80211: Add and use ht_vdbg debugging macroJoe Perches
Simplify the use of #ifdef CONFIG_MAC80211_HT_DEBUG/#endif by adding a logging macro to encapsulate the test. Convert the appropriate uses too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05net: mac80211: Convert printk(KERN_DEBUG to pr_debugJoe Perches
Standardize the debugging to be able to use dynamic_debug. Coalesce formats, align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: send beacon loss events to userspaceHolger Schurig
Send beacon loss events to userspace, so it will be able to initiate roaming before disconnection Signed-off-by: Holger Schurig <holgerschurig@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05nl80211: add new rssi event to indicate beacon lossEliad Peller
Tell userspace about beacon loss event. This event doesn't replace the deauth/disassoc that might come if the AP is not available. The driver can send this event in order to hint userspace what might follow (which in turn can use it as roaming trigger). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05ath9k: Fix modal EEPROM dumpMohammed Shafi Shajakhan
we provide excess buffer size for 'simple_read_from_buffer' for modal EEPROM dump. This results in trailing NULL bytes at the end of EEPROM dump, fix this. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Holger Schurig <holgerschurig@googlemail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by: Holger Schurig <holgerschurig@gogglemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05brcm80211: brcmu_pkt_buf_free_skb() should handle NULLDan Carpenter
This is potentially called with NULL pointers, for example, look at brcmf_c_prec_enq(). Since it's a free() function, probably people expect it to handle NULL pointers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>