summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-10-09sched debug: add name to sched_domain sysctl entriesIngo Molnar
add /proc/sys/kernel/sched_domain/cpu0/domain0/name, to make it easier to see which specific scheduler domain remained at that entry. Since we process the scheduler domain tree and simplify it, it's not always immediately clear during debugging which domain came from where. depends on CONFIG_SCHED_DEBUG=y. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-08sched: sync wakeups vs avg_overlapPeter Zijlstra
While looking at the code I wondered why we always do: sync && avg_overlap < migration_cost Which is a bit odd, since the overlap test was meant to detect sync wakeups so using it to specialize sync wakeups doesn't make much sense. Hence change the code to do: sync || avg_overlap < migration_cost Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-08Merge branches 'sched/devel', 'sched/cpu-hotplug', 'sched/cpusets' and ↵Ingo Molnar
'sched/urgent' into sched/core
2008-10-07SLOB: fix bogus ksize calculationMatt Mackall
SLOB's ksize calculation was braindamaged and generally harmlessly underreported the allocation size. But for very small buffers, it could in fact overreport them, leading code depending on krealloc to overrun the allocation and trample other data. Signed-off-by: Matt Mackall <mpm@selenic.com> Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-07Revert "V4L/DVB (8904): cx88: add missing unlock_kernel"Linus Torvalds
This reverts commit 135aedc38e812b922aa56096f36a3d72ffbcf2fb, as requested by Hans Verkuil. It was a patch for 2.6.28 where the BKL was pushed down from v4l core to the drivers, not for 2.6.27! Requested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06Linux 2.6.27-rc9v2.6.27-rc9Linus Torvalds
2008-10-06Marker depmod fix core kernel listMathieu Desnoyers
* Theodore Ts'o (tytso@mit.edu) wrote: > > I've been playing with adding some markers into ext4 to see if they > could be useful in solving some problems along with Systemtap. It > appears, though, that as of 2.6.27-rc8, markers defined in code which is > compiled directly into the kernel (i.e., not as modules) don't show up > in Module.markers: > > kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > > (Note the lack of any of the kernel_sched_* markers, and the markers I > added for ext4_* and jbd2_* are missing as wel.) > > Systemtap apparently depends on in-kernel trace_mark being recorded in > Module.markers, and apparently it's been claimed that it used to be > there. Is this a bug in systemtap, or in how Module.markers is getting > built? And is there a file that contains the equivalent information > for markers located in non-modules code? I think the problem comes from "markers: fix duplicate modpost entry" (commit d35cb360c29956510b2fe1a953bd4968536f7216) Especially : - add_marker(mod, marker, fmt); + if (!mod->skip) + add_marker(mod, marker, fmt); } return; fail: Here is a fix that should take care if this problem. Thanks for the bug report! Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Tested-by: "Theodore Ts'o" <tytso@mit.edu> CC: Greg KH <greg@kroah.com> CC: David Smith <dsmith@redhat.com> CC: Roland McGrath <roland@redhat.com> CC: Sam Ravnborg <sam@ravnborg.org> CC: Wenji Huang <wenji.huang@oracle.com> CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: call touch_softlockup_watchdog on resume kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
2008-10-06Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: gart iommu have direct mapping when agp is present too
2008-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
2008-10-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y [MIPS] Fix CMP Kconfig configuration and mark as broken.
2008-10-06Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U V4L/DVB (9092): gspca: Bad init values for sonixj ov7660. V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors. V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561. V4L/DVB (9053): fix buffer overflow in uvc-video V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow V4L/DVB (9037): Fix support for Hauppauge Nova-S SE V4L/DVB (9029): Fix deadlock in demux code V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600 V4L/DVB (8963): s2255drv field count fix V4L/DVB (8961): zr36067: Fix RGBR pixel format V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h V4L/DVB (8958): zr36067: Return proper bytes-per-line value V4L/DVB (8957): zr36067: Restore the default pixel format V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800) V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom. ...
2008-10-06atmel-mci: Initialize BLKR before sending data transfer commandHaavard Skinnemoen
The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: Hein_Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06kgdb: call touch_softlockup_watchdog on resumeJason Wessel
The softlockup watchdog needs to be touched when resuming the from the kgdb stopped state to avoid the printk that a CPU is stuck if the debugger was active for longer than the softlockup threshold. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-10-06kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMIJan Kiszka
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-10-06x86 ACPI: Blacklist two HP machines with buggy BIOSesRafael J. Wysocki
There is a bug in the BIOSes of some HP boxes with AMD Turions which connects IO-APIC pins with ACPI thermal trip points in such a way that if the state of the IO-APIC is not as expected by the (buggy) BIOS, the thermal trip points are set to insanely low values (usually all of them become 16 degrees Celsius). As a result, thermal throttling kicks in and knock the system down to its shoes. Unfortunately some of the recent IO-APIC changes made the bug show up. To prevent this from happening, blacklist machines that are known to be affected (nx6115 and 6715b in this particular case). This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as a regression from 2.6.26. On my box it was caused by: commit 691874fa96d6349a8b60f8ea9c2bae52ece79941 Author: Maciej W. Rozycki <macro@linux-mips.org> Date: Tue May 27 21:19:51 2008 +0100 x86: I/O APIC: timer through 8259A second-chance Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> and the whole story is described in this (huge) thread: http://marc.info/?l=linux-kernel&m=121358440508410&w=4 Matthew Garrett told us about that happening on the nx6125: http://marc.info/?l=linux-kernel&m=121396307411930&w=4 and then Maciej analysed the breakage on the basis of a DSDT from the nx6325: http://marc.info/?l=linux-kernel&m=121401068718826&w=4 As far as the Dmitry's and Jason's boxes are concerned, I recognized the symptoms and asked them to verify that the blacklisting helped. It appears that the buggy BIOS code has been copy-pasted to the entire range of machines, for no good reason. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06sched: remove redundant code in cpu_cgroup_create()Li Zefan
css will be initialized by cgroup core. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06Merge branch 'linus' into sched/develIngo Molnar
2008-10-06[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=yRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-06[MIPS] Fix CMP Kconfig configuration and mark as broken.Ralf Baechle
Because sync-r4k.c doesn't build. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-05ide: workaround for bogus gcc warning in ide_sysfs_register_port()Bartlomiej Zolnierkiewicz
Reported-by: "Steven Noonan" <steven@uplinklabs.net> Suggested-by: "Elias Oltmanns" <eo@nebensachen.de> Cc: mingo@elte.hu Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-cd: Optiarc DVD RW AD-7200A does play audioBodo Eggert
The Optiarc DVD RW AD-7200A can play audio, but tells it could not. Signed-off-by: Bodo Eggert <7eggert@gmx.de> Tested-by: Nick Warne <nick@ukfsn.org> Received-from: Borislav Petkov <petkovbb@googlemail.com> [bart: keep "audio" quirks together] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05IDE: Fix platform device registration in Swarm IDE driver (v2)Ralf Baechle
The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-dma: fix ide_build_dmatable() for TRM290Sergei Shtylylov
Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes, judging from the code immediately preceding this check. So, we must never try to "split" the PRD for TRM290. This is probably never hit anyway -- with the DMA buffers aligned to at least 512 bytes and ATAPI DMA not being used for non block I/O commands... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-cd: temporary tray close fixBorislav Petkov
This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602. A more generic fix for drives which cannot autoclose tray will follow. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> [bart: add an extra parentheses for consistency with the rest of kernel code] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05x86: gart iommu have direct mapping when agp is present tooYinghai Lu
move init_memory_mapping() out of init_k8_gatt. for: http://bugzilla.kernel.org/show_bug.cgi?id=11676 2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression This is needed because we need to map the GART aperture even if the GATT is not initialized. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issueWiktor Grebla
Fixed audio clicking problem which could be heard when using analog tv or composite input Signed-off-by: Wiktor Grebla <greblus@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310UDarron Broad
Correct firmware type to MTS Correct audio routing for composite/s-video Add DVB-T detection. This patch uses the eeprom hash method for detection as the vendor/product ids are also used for the DIGIVOX_AD. This may be a clone of the same product. Explanatory text has been added prior to the hask look-up in anticipation that it may help others. The following has been tested to work: Analogue TV (PAL-I) Composite In DVB-T (UK Crystal Palace) USB AUDIO The following has not been tested but probably works: S-Video In Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.Shane
This makes auto gain functional on 04fc:0561. Signed-off-by: Shane <gnome42@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9053): fix buffer overflow in uvc-videoRalph Loader
There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c: INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975 ... A fixed size 8-byte buffer is allocated, and a variable size field is read into it; there is no particular bound on the size of the field (it is dependent on hardware and configuration) and it can overflow [also verified by inserting printk's.] The patch attempts to size the buffer to the correctly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflowPatrick Boettcher
The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00. Thanks to Oliver Endriss for pointing that out. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9037): Fix support for Hauppauge Nova-S SEPatrick Boettcher
Different backends have different input busses (saa7146, flexcop). To reflect that a config-option to the s5h1420-driver was added which makes the output mode selectable. Furthermore the s5h1420-driver is now doing the same i2c-method as it was done before adding support for other i2c-users. This patch needs to go into the current release of the kernel, as this driver is currently broken. (Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9029): Fix deadlock in demux codeAndreas Oberritter
The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback, dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and dvb_dmx_swfilter_204 may be called from both interrupt and process context. Therefore they need to be protected by spin_lock_irqsave() instead of spin_lock(). This fixes a deadlock discovered by lockdep. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStickMichael Krufky
2040:5510 is the same hardware as 2040:5500 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStickMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600Devin Heitmueller
The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to load the proper firmware to prevent the device from overheating. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8963): s2255drv field count fixDean Anderson
Fixes videobuf field_count Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8961): zr36067: Fix RGBR pixel formatJean Delvare
The zr36067 driver is improperly declaring pixel format RGBP twice, once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is actually RGBR. Fix the code to properly map both pixel formats. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.hAndrew Morton
sparc32 allmodconfig: drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf': drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN' drivers/media/video/cafe_ccic.c: At top level: drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap': drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.) drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function) This build breakage is caused by some header file shuffle in linux-next. But I suggest that this patch be merged ahead of linux-next to avoid bisection breakage. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8958): zr36067: Return proper bytes-per-line valueJean Delvare
The zr36067 driver should return the actual bytes-per-line value when queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space applications can get confused. Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the bytes-per-line value. And we shouldn't fail if the caller sets the initial value to something different from 0. This is perfectly valid for applications to pre-fill this field with the value they expect. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8957): zr36067: Restore the default pixel formatJean Delvare
Restore the default pixel format to YUYV as it used to be before kernel 2.6.23. It was accidentally changed to BGR3 by commit 603d6f2c8f9f3604f9c6c1f8903efc2df30a000f. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_openJean Delvare
Fix the following crash in the bttv driver: BUG: unable to handle kernel NULL pointer dereference at 000000000000036c IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv] This happens because radio_open assumes that all present bttv devices have a radio function. If a bttv device without radio and one with radio are installed on the same system, and the one without radio is registered first, then radio_open checks for the radio device number of a bttv device that has no radio function, and this breaks. All we have to do to fix it is to skip bttv devices without a radio function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8935): em28xx-cards: Remove duplicate entry ↵Douglas Schilling Landgraf
(EM2800_BOARD_KWORLD_USB2800) Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800 Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.Costantino Leandro
CS2102K stop streaming on setlightfreq (50Hz & 60Hz). Disable it for now until a correct solution is found. Signed-off-by: Costantino Leandro <le_costantino@pixartargentina.com.ar> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8926): gspca: Bad fix of leak memory (changeset 43d2ead315b1).Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8919): cx18: Fix tuner audio input for Compro H900 cardsHans Verkuil
Earlier fixes to get the tuner audio working correctly broke the audio on the Compro VideoMate H900 cards. This is now fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevents: check broadcast tick device not the clock events device
2008-10-04Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 setup: correct segfault in generation of 32-bit reloc kernel
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 23:57:40 +0000