summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-02-17ASoC: dapm: Unexport snd_soc_dapm_new_control()Mark Brown
Everything now uses snd_soc_dapm_new_controls() instead so we don't need to make it part of the external API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17ALSA: core: Constify the name in new kcontrolsMark Brown
We never modify it and this lets us use a const string as the name without warnings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17ASoC: Change spitz_ext_control to take dapm as argument.Axel Lin
This fixes below build warning: CC sound/soc/pxa/spitz.o sound/soc/pxa/spitz.c: In function 'spitz_startup': sound/soc/pxa/spitz.c:116: warning: passing argument 1 of 'spitz_ext_control' from incompatible pointer type sound/soc/pxa/spitz.c:47: note: expected 'struct snd_soc_card *' but argument is of type 'struct snd_soc_codec *' Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: ak4535: Convert to direct regmap API usageMark Brown
I suspect the timer register may also be volatile. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: ak4535: Remove bitrotted driver versionMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: ak4535: Make I2C usage unconditionalMark Brown
Convert to module_i2c_driver() too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: ak4535: Remove -codec from driver nameMark Brown
Redundant, the device is only a CODEC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Convert to runtime PM for bias off managementMark Brown
This allows userspace control of final power off, allowing policy decisions for register configuration retention. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Don't automatically enable and disable FLLMark Brown
Only enable and disable the FLL when explicitly told to, supporting some additional use cases and making the driver behaviour more standard. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Clean up register dump cruftMark Brown
No longer needed with regmap. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Add new SYSCLK ratios for new device revisionsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Log the selected SYSCLK ratioMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Only configure BCLK in hw_params when audio is activeMark Brown
Otherwise we might not have a sensible clocking setup ready. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: wm8962: Update the clocking when setting system clockMark Brown
Make sure we update for any changes in cases where we reconfigure while live (eg, for analogue bypass). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-16ASoC: spitz: Fix kcontrols to use card instead of codecLiam Girdwood
Machine kcontrols now use card instead of codec for thier "chip". Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15ASoC: Show device id in the debug messageAxel Lin
Show the id we read when the id mismatch is detected. This is useful for debugging. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15ASoC: Get correct revision id for wm2200Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15ASoC: core: add platform DAPM debugfs supportSebastien Guiriec
Allow platform widgets to be visible in debugfs like codec widgets. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15ASoC: dapm: Convert pin switches to use snd_soc_cardMark Brown
Since the addition of the non-CODEC control adds card controls like the DAPM pin switch have been broken as they are expecting the private data for the control to be the CODEC but it's now the card. Fix that for the pin switches, an audit of other drivers is required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-15ASoC: core: Convert CODEC debugfs init to use dev_warn()Liam Girdwood
Update the codec debugfs initialisation to use dev_warn() instead of printk(KERN_WARNING). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15ASoC: dapm: Notify stream event to all card components.Liam Girdwood
Currently when DAPM widgets are power sequenced the stream_event() completion callback is only called for the stream_event originator DAPM context. Other components in the card may also be interested so make sure they are also notified of any widget power events. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-15ASoC: dapm - Make DAPM reset code a separate function.Liam Girdwood
It's useful to export the DAPM reset as a static function for future use by other DAPM functions. e.g. The dynamic PCM query widgets resets the DAPM graph before working out active paths. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm8994: Use slow start for VMIDMark Brown
Improves performance on power up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm9081: Use idle_bias_offMark Brown
The main role of the WM9081 is as a class D speaker amplifier so there is no concern about pops. There are also very few registers and a fast power up time so we can happily mark the driver as idle_bias_off. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm9081: Move WM9081 IRQ platform data handling into I2C probeMark Brown
Better style and better supports idle_bias_off which we're going to implement. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: wm8988: Remove unneded -codec from driver nameMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: wm8988: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: wm9081: Use module_i2c_driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: tegra+alc5632: Added digital microphone DAPM widget.Leon Romanovsky
ALC5632 codec supports digital microphone. This patch adds DAPM widget. Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: wm8994: Actively discharge VMID when not in useMark Brown
Ensure we're in a known state when we restart. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: wm8994: VMID management improvementsMark Brown
Raise the ramp time to 50ms to cover corner cases, use the startup bias generator, explicitly reset the ramp circuit when complete and reorder things all of which should improve performance somewhat for systems that are sensitive to noise from VMID. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: wm_hubs: Clamp inputs to VMID while we rampMark Brown
Reduces the amount of time taken to stabilise them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: wm_hubs: Improve single ended line output enable performanceMark Brown
The enable of the single ended line outputs on wm_hubs devices performs better if the output is enabled prior to starting VMID. Since inactive outputs are held at VMID anyway there is little cost to doing this for unused outputs. Add callbacks into wm_hubs and keep track of which outputs are really active so we can disable them once we're active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Allow 8kHz stream support.Andrey Danin
Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Fix Capture/Playback attributes for microphone inputsPaul Fertser
According to the mixer path diagram input sources' attenuators logically belong to the playback path and DMIC boost only affects capture. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Fix Boost Volume TLVs used for the external microphonesPaul Fertser
This brings the TLVs in sync with the documentation and allows to properly manipulate mic boost controls with alsamixer. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Connect HP/HPL/HPR mix'es to HPOut MixMarc Dietrich
This patch should fix output through speakers using HP mixer. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Fix I2S digital interface power for recordingAndrey Danin
Fix I2S digital interface power for recording. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Add DMIC switches and controlsAndrey Danin
Add DMIC switches and controls to ALC5632 codec. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Refactored DAPM routes to add voice supportAndrey Danin
Refactored DAPM routes to add voice support. - Added undocumented register - Used AIF in/out - Added missed voice items and routes - Added DMIC input - Romoved unrelevant items Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Remove unexisting route from Phone Mix to Mono MixAndrey Danin
There is no Phone Mix<->Mono Mix route in datasheet. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Rename capture switches to common scheme XXX2RECAndrey Danin
Rename capture switches to common scheme XXX2REC. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Add voice DAC playback switchAndrey Danin
Add voice DAC playback switch. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Fixed voice DAC volume step.Andrey Danin
Remove extra zero from volume step in DECLARE_TLV_DB_SCALE macro. Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-11ASoC: alc5632: Coding style. Remove two extra empty lines.Andrey Danin
Signed-off-by: Andrey Danin <danindrey@mail.ru> Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-10ASoC: wm8993: Add register default for INPUTS_CLAMPMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-10ASoC: mxs-saif: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-10ASoC: wm8993: Correct typos in regmap conversionMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-10ASoC: Fix build error in sound/soc/omap/n810.cAxel Lin
Fix below build error which is introduced by commit 022658 "ASoC: core: Add support for DAI and machine kcontrols". CC [M] sound/soc/omap/n810.o sound/soc/omap/n810.c: In function 'n810_set_input': sound/soc/omap/n810.c:194: error: 'codec' undeclared (first use in this function) sound/soc/omap/n810.c:194: error: (Each undeclared identifier is reported only once sound/soc/omap/n810.c:194: error: for each function it appears in.) sound/soc/omap/n810.c:188: warning: unused variable 'card' make[3]: *** [sound/soc/omap/n810.o] Error 1 make[2]: *** [sound/soc/omap] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-09ASoC: Fix typo in twl4030.cMasanari Iida
Correct spelling "memroy" to "memory" in sound/soc/codecs/twl4030.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-23 03:45:52 +0000