summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-08-20tg3: Update version to 3.120Matt Carlson
This patch updates the tg3 version to 3.120. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Add external loopback support to selftestMatt Carlson
This patch adds external loopback support to tg3's ethtool selftest. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Restructure tg3_test_loopbackMatt Carlson
The tg3_test_loopback() function is starting to get more complicated as more loopback tests are added. This patch cleans up the code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Pull phy int lpbk setup into separate funcMatt Carlson
This patch pulls out the internal phy loopback setup code into a separate function. This cleans up the loopback test code and makes it available for NETIF_F_LOOPBACK support later. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Consilidate MAC loopback codeMatt Carlson
The driver puts the device into MAC loopback in two places in the driver. This patch consolidates the code into a single routine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20tg3: Remove dead codeMatt Carlson
Now that CPMU devices don't do MAC loopback, all the CPMU power saving mode adjustments are unneeded. This patch removes the dead code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20qlge: Adding Maintainer.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19net: add the comment for skb->l4_rxhashChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: rps: support PPPOE session messagesChangli Gao
Inspect the payload of PPPOE session messages for the 4 tuples to generate skb->rxhash. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: rps: support 802.1QChangli Gao
For the 802.1Q packets, if the NIC doesn't support hw-accel-vlan-rx, RPS won't inspect the internal 4 tuples to generate skb->rxhash, so this kind of traffic can't get any benefit from RPS. This patch adds the support for 802.1Q to RPS. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18be2net: Storing the 'vid' got by the grp5 event instead of storing the vlan_tagSomnath Kotur
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18bnx2x: downgrade Max BW error message to debugMichal Schmidt
There are valid configurations where Max BW is configured to zero for some VNs. Print the message only if debugging is enabled and do not call the configuration "illegal". [v2: use DP(), not BNX2X_DBG_ERR(); recommended by Eilon Greenstein.] Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: fix IBM EMAC driver after rename.Tony Breeds
In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18NET: Korina: Don't include <asm/segment.h>Ralf Baechle
Korina.c is a MIPS-specific SOC driver and <asm/segment> is empty on MIPS since 2.1.7 ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18MAINTAINERS: qlcnicAnirban Chakraborty
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18MAINTAINERS: change netxen_nic maintainersAmit Kumar Salecha
I will no longer maintain netxen_nic driver. Sony Chacko and Rajesh Borundia are taking over. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Add flexcan device support for p1010rdb.holt@sgi.com
Allow the p1010 processor to select the flexcan network driver. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>, Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Prefer device tree clock frequency if available.holt@sgi.com
If our CAN device's device tree node has a clock-frequency property, then use that value for the can devices clock frequency. If not, fall back to asking the platform/mach code for the clock frequency associated with the flexcan device. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Add of_match to platform_device definition.holt@sgi.com
On powerpc, the OpenFirmware devices are not matched without specifying an of_match array. Introduce that array as that is used for matching on the Freescale P1010 processor. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Fix up fsl-flexcan device tree binding.holt@sgi.com
This patch cleans up the documentation of the device-tree binding for the Flexcan devices on Freescale's PowerPC and ARM cores. Extra properties are not used by the driver so we are removing them. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>, Acked-by: Wolfgang Grandegger <wg@grandegger.com>, Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: socketcan-core@lists.berlios.de, Cc: netdev@vger.kernel.org, Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Abstract off read/write for big/little endian.holt@sgi.com
Make flexcan driver handle register reads in the appropriate endianess. This was a basic search and replace and then define some inlines. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17flexcan: Remove #include <mach/clock.h>holt@sgi.com
powerpc does not have a mach-####/clock.h. When testing, I found neither arm nor powerpc needed the mach/clock.h at all so I removed it. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: U Bhaskar-B22300 <B22300@freescale.com> Cc: socketcan-core@lists.berlios.de Cc: netdev@vger.kernel.org Cc: PPC list <linuxppc-dev@lists.ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove ndo_set_multicast_list callbackJiri Pirko
Remove no longer used operation. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: introduce IFF_UNICAST_FLT private flagJiri Pirko
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17bonding: use ndo_change_rx_flags callbackJiri Pirko
Benefit from use of ndo_change_rx_flags in handling change of promisc and allmulti. No need to store previous state locally. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17Merge branch 'can/mscan' of git://git.pengutronix.de/git/mkl/linux-2.6David S. Miller
2011-08-17rps: Inspect GRE encapsulated packets to get flow hashTom Herbert
Crack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on in encapsulated packet. Note that this is used only when the __skb_get_rxhash is taken, in particular only when the device does not compute provide the rxhash (ie. feature is disabled). This was tested by creating a single GRE tunnel between two 16 core AMD machines. 200 netperf TCP_RR streams were ran with 1 byte request and response size. Without patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs With patch: 325896 tps, 50/90/99% latencies 603/848/1169 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Infrastructure in __skb_get_rxhash for deep inspectionTom Herbert
Basics for looking for ports in encapsulated packets in tunnels. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Add flag to skb to indicate rxhash is based on L4 tupleTom Herbert
The l4_rxhash flag was added to the skb structure to indicate that the rxhash value was computed over the 4 tuple for the packet which includes the port information in the encapsulated transport packet. This is used by the stack to preserve the rxhash value in __skb_rx_tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Some minor cleanup in get_rps_cpusTom Herbert
Use some variables for clarity and extensibility. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17bnx2x: Use pr_fmt and message logging cleanupsJoe Perches
Add pr_fmt(fmt) KBUILD_MODNAME ": " to prefix messages with "bnx2x: ". Remove #define DP_LEVEL and use pr_notice. Repeating KERN_<LEVEL> isn't necessary in multi-line printks. printk macro neatening, use fmt and ##__VA_ARGS__. Coalesce long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17bnx2x: Coalesce pr_cont uses and fix DP typosJoe Perches
Uses of pr_cont should be avoided where reasonably possible because they can be interleaved by other threads and processes. Coalesce pr_cont uses. Fix typos, duplicated words and spacing in DP uses caused by split multi-line formats. Coalesce some of these split formats. Add missing terminating newlines to DP uses. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17bnx2x: Remove local defines for %pM and mac addressJoe Perches
Use %pM and mac address directly instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16ethtool: Note common alternate exit condition for interrupt coalescingBen Hutchings
Many implementations ignore the value of max_frames and do not treat usecs == 0 as special. Document this as deprecated. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16ethtool: Explicitly state the exit condition for interrupt coalescingBen Hutchings
Also explicitly state how to disable interrupt coalescing. Remove the now-redundant text from field descriptions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16ethtool: Correct description of 'max_coalesced_frames' fieldsBen Hutchings
The current descriptions state that these fields specify 'How many packets to delay ... after a packet ...' which implies that the hardware should wait for (max_coalesced_frames + 1) completions before generating an interrupt. It is also stated that setting both this field and the corresponding 'coalesce_usecs' field to 0 is invalid. Together, this implies that the hardware must always be configured to delay a completion IRQ for at least 1 usec or 1 more completion. I believe that the addition of 1 is not intended, and David Miller confirms that the original implementation (in tg3) does not do this. Clarify the descriptions of these fields to avoid this interpretation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16ethtool: Specify what kind of coalescing struct ethtool_coalesce coversBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16ethtool: Reformat struct ethtool_coalesce comments into kernel-doc formatBen Hutchings
This reorders and duplicates some wording, but should make no substantive changes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16net: Fix sungem_phy sharing.David S. Miller
Since sungem_phy is used by multiple, unrelated, drivers make it build as a real module under drivers/net. depmod will pick up the symbol dependency and make sure sungem_phy.ko gets loaded any time sungem.ko or spider_net.ko is loaded. Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15sungem: sungem_phy.h movedStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15net/can/mscan: add __iomem annotationsMarc Kleine-Budde
This patch fixes the following sparse warning by adding the missing __iomem annotation. drivers/net/can/mscan/mscan.c:73:32: warning: incorrect type in argument 1 (different address spaces) drivers/net/can/mscan/mscan.c:73:32: expected unsigned char volatile [noderef] [usertype] <asn:2>*addr drivers/net/can/mscan/mscan.c:73:32: got unsigned char *<noident> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-08-14net: Move sungem_phy.h under include/linuxDavid S. Miller
Fixes build failures of the spider_net driver because it tries to use a convoluted path to include this header. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: add support for af_iucv HiperSockets transportFrank Blaschka
This patch extends the HiperSockets device driver to send and receive af_iucv traffic over HiperSockets transport. TX: Driver uses new asynchronous delivery of storage blocks to pass flow control/congestion information from the HiperSockets microcode to the af_iucv socket. RX: Memory for incoming traffic is preallocated and passed to HiperSockets layer. If receiver is not capable to clean its buffers shared with HiperSockets and pass new memory to the HiperSockets layer this will cause flow control/congestion events on the sender. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: exploit asynchronous delivery of storage blocksEinar Lueck
This patch exploits the QDIO support for asynchronous delivery of storage blocks for Hipersockets. The exploitation is not configured per default and may be enabled via the function qeth_configure_cq. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: support forced signal adapter indicationsEinar Lueck
This patch ensures that signal adapter commands are issued if they are indicated to be required. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qdio: support forced signal adapter indicationsfrank.blaschka@de.ibm.com
This patch ensures that signal adapter commands are issued if they are indicated to be required. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qdio: support asynchronous delivery of storage blocksfrank.blaschka@de.ibm.com
This patch introduces support for asynchronous delivery of storage blocks for Hipersockets. Upper layers may exploit this functionality to reuse SBALs for which the delivery status is still pending. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13af_iucv: add HiperSockets transportUrsula Braun
The current transport mechanism for af_iucv is the z/VM offered communications facility IUCV. To provide equivalent support when running Linux in an LPAR, HiperSockets transport is added to the AF_IUCV address family. It requires explicit binding of an AF_IUCV socket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV is announced. An af_iucv specific transport header is defined preceding the skb data. A small protocol is implemented for connecting and for flow control/congestion management. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13if_ether: add new Ethernet Protocol ID for af_iucvFrank Blaschka
Add a new ethertype for af_iucv over s/390 HiperSockets transport. Since HiperSockets is not a real ethernet hw this is not an officially registered ID. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>