summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-03-11[media] mem2mem_testdev: set priv to 0Hans Verkuil
v4l2_compliance fix. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] mem2mem_testdev: pick default format with try_fmtHans Verkuil
This resolves an issue raised by v4l2-compliance: if the given format does not exist, then pick a default format. While there is an exception regarding this for TV capture drivers, this m2m driver should do the right thing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] mem2mem_testdev: use 40ms default transfer timeHans Verkuil
The default of 1 second is a bit painful, switch to a 25 Hz framerate. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] s5p-mfc: remove meaningless memory bank assignmentSeung-Woo Kim
This patch removes meaningless assignment of memory bank to itself. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] s5p-mfc: Replaced commas with semicolonsJoonyoung Shim
There is no any reason to use comma here. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Add support for power downLars-Peter Clausen
The adv7180 has a low power mode in which the analog and the digital processing section are shut down. Implement the s_power callback to let bridge drivers put the part into low power mode when not needed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Add support for async device registrationLars-Peter Clausen
Add support for async device registration to the adv7180 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Use threaded IRQ instead of IRQ + workqueueLars-Peter Clausen
The proper way to handle IRQs that need to be able to sleep in their IRQ handler is to use a threaded IRQ. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Remove duplicated probe error messageLars-Peter Clausen
The device driver core already prints out a very similar message when a driver fails to probe. No need to print one in the driver itself. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Remove unnecessary v4l2_device_unregister_subdev() from ↵Lars-Peter Clausen
probe error path The device can't possibly be registered at this point, so no need to to call v4l2_device_unregister_subdev(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Free control handler on remove()Lars-Peter Clausen
Make sure to free the control handler when the device is removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv7180: Fix remove orderLars-Peter Clausen
The mutex is used in the subdev callbacks, so unregister the subdev before the mutex is destroyed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] DocBook v4l2: update the G/S_EDID documentationHans Verkuil
Document that it is now possible to call G/S_EDID from video nodes, not just sub-device nodes. Add a note that -EINVAL will be returned if the pad does not support EDIDs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] adv*: replace the deprecated v4l2_subdev_edid by v4l2_edidHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l2: add VIDIOC_G/S_EDID support to the v4l2 coreHans Verkuil
Support this ioctl as part of the v4l2 core. Use the new ioctl name and struct v4l2_edid type in the existing core code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l2: allow v4l2_subdev_edid to be used with video nodesHans Verkuil
Struct v4l2_subdev_edid and the VIDIOC_SUBDEV_G/S_EDID ioctls were specific for subdevices, but for hardware with a simple video pipeline you do not need/want to create subdevice nodes to just get/set the EDID. Move the v4l2_subdev_edid struct to v4l2-common.h and rename as v4l2_edid. Add the same ioctls to videodev2.h as well, thus allowing this API to be used with both video nodes and v4l-subdev nodes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l2-compat-ioctl32: fix wrong VIDIOC_SUBDEV_G/S_EDID32 supportHans Verkuil
The wrong ioctl numbers were used due to a copy-and-paste error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.7 and up Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] lm3646: add new dual LED Flash driverDaniel Jeong
This patch adds the driver for the LM3646, dual LED Flash driver. The LM3646 has two 1.5A sync. boost converter with dual white current source. It is controlled via an I2C compatible interface. Each flash brightness, torch brightness and enable/disable can be controlled. Under voltage, input voltage monitor and thermal threshhold Faults are added. Please refer the datasheet http://www.ti.com/lit/ds/snvs962/snvs962.pdf Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l2-controls.h: Add addtional Flash fault bitsDaniel Jeong
Three Flash fault are added. V4L2_FLASH_FAULT_UNDER_VOLTAGE for the case low voltage below the min. limit. V4L2_FLASH_FAULT_INPUT_VOLTAGE for the case falling input voltage and chip adjust flash current not occur under voltage event. V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE for the case the temperature exceed the maximun limit Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] controls.xml: Document addtional Flash fault bitsDaniel Jeong
Descriptions for flash faults V4L2_FLASH_FAULT_UNDER_VOLTAGE, V4L2_FLASH_FAULT_INPUT_VOLTAGE, and V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE. Removed spaces before tabs. Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] lm3560: prevent memory leak in case of pdata absenceAndy Shevchenko
If we have no pdata defined and driver fails to register we leak memory. Converting to devm_kzalloc prevents this to happen. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] lm3560: keep style for the commentsAndy Shevchenko
Let's keep the style for all comments in the code, namely using small letters whenever it's possible. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] lm3560: remove FSF address from the licenseAndy Shevchenko
There is no need to keep the FSF address inside each file. Moreover, it might change in future which will make this one obsolete. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l: of: Support empty port nodesLaurent Pinchart
Empty port nodes are allowed but currently unsupported as the v4l2_of_get_next_endpoint() function assumes that all port nodes have at least an endpoint. Fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] MAINTAINERS: remove myself as a maintainer of VEU and VOU V4L2 driversGuennadi Liakhovetski
Since I'm currently unable to dedicate sufficient time to the maintainership of these two drivers update their status to "orphan" until new maintainers appear. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] media: soc_camera: rcar_vin: Add support for 10-bit YUV camerasPhil Edworthy
Add support for MBUS YUV10 BT656 and BT601 formats at rcar driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] s2255drv: memory leak fixsensoray-dev
Fixes memory leak introduced by commit 47d8c881c304642a68d398b87d9e8846e643c81a. Signed-off-by: Dean Anderson <linux-dev@sensoray.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] tvp5150: Make debug module parameter visible in sysfsPhilipp Zabel
Set permissions on the debug module parameter to make it appear in sysfs. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] tvp5150: Fix type mismatch warning in clamp macroPhilipp Zabel
This patch fixes the following warning: drivers/media/i2c/tvp5150.c: In function '__tvp5150_try_crop': include/linux/kernel.h:762:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__min); \ ^ drivers/media/i2c/tvp5150.c:886:16: note: in expansion of macro 'clamp' rect->width = clamp(rect->width, ^ include/linux/kernel.h:763:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__max); \ ^ drivers/media/i2c/tvp5150.c:886:16: note: in expansion of macro 'clamp' rect->width = clamp(rect->width, ^ include/linux/kernel.h:762:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__min); \ ^ drivers/media/i2c/tvp5150.c:904:17: note: in expansion of macro 'clamp' rect->height = clamp(rect->height, ^ include/linux/kernel.h:763:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__max); \ ^ drivers/media/i2c/tvp5150.c:904:17: note: in expansion of macro 'clamp' rect->height = clamp(rect->height, ^ Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] em28xx-cards: remove a wrong indent levelDan Carpenter
This code is correct but the indenting is wrong and triggers a static checker warning "add curly braces?". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] staging/dt3155v4l: use PCI_VENDOR_ID_INTELJon Mason
Use PCI_VENDOR_ID_INTEL instead of creating its own vendor ID #define. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] media DocBook: fix NV16M descriptionHans Verkuil
The NV16M description contained some copy-and-paste text from NV12M, suggesting that this format is a 4:2:0 format when it really is a 4:2:2 format. Fixed the text. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] arv: fix sleep_on raceArnd Bergmann
interruptible_sleep_on is racy and going away. In the arv driver that race has probably never caused problems since it would require a whole video frame to be captured before the read function has a chance to go to sleep, but using wait_event_interruptible lets us kill off the old interface. In order to do this, we have to slightly adapt the meaning of the ar->start_capture field to distinguish between not having started a frame and having completed it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l: VIDEO_SH_VOU should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: warning: (VIDEO_DM6446_CCDC && VIDEO_DM355_CCDC && VIDEO_DM365_ISIF && VIDEO_OMAP2_VOUT && VIDEO_SH_VOU && VIDEO_VIU && VIDEO_TIMBERDALE && VIDEO_MX1 && VIDEO_OMAP1) selects VIDEOBUF_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA) drivers/built-in.o: In function `videobuf_vm_close': videobuf-dma-contig.c:(.text+0x407aa0): undefined reference to `videobuf_queue_cancel' drivers/built-in.o: In function `__videobuf_dc_alloc': videobuf-dma-contig.c:(.text+0x407ba2): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `__videobuf_mmap_mapper': videobuf-dma-contig.c:(.text+0x407d44): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `free_buffer': sh_vou.c:(.text+0x41f73a): undefined reference to `videobuf_waiton' drivers/built-in.o: In function `sh_vou_poll': sh_vou.c:(.text+0x41f884): undefined reference to `videobuf_poll_stream' drivers/built-in.o: In function `sh_vou_buf_prepare': sh_vou.c:(.text+0x41fdf6): undefined reference to `videobuf_iolock' drivers/built-in.o: In function `sh_vou_reqbufs': sh_vou.c:(.text+0x4203b0): undefined reference to `videobuf_reqbufs' drivers/built-in.o: In function `sh_vou_querybuf': sh_vou.c:(.text+0x42040a): undefined reference to `videobuf_querybuf' drivers/built-in.o: In function `sh_vou_qbuf': sh_vou.c:(.text+0x42045e): undefined reference to `videobuf_qbuf' drivers/built-in.o: In function `sh_vou_dqbuf': sh_vou.c:(.text+0x4204c2): undefined reference to `videobuf_dqbuf' drivers/built-in.o: In function `sh_vou_streamon': sh_vou.c:(.text+0x420572): undefined reference to `videobuf_streamon' drivers/built-in.o: In function `sh_vou_streamoff': sh_vou.c:(.text+0x4205d2): undefined reference to `videobuf_streamoff' drivers/built-in.o: In function `sh_vou_mmap': sh_vou.c:(.text+0x420c46): undefined reference to `videobuf_mmap_mapper' VIDEO_SH_VOU selects VIDEOBUF_DMA_CONTIG, which bypasses its dependency on HAS_DMA. Make VIDEO_SH_VOU depend on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] v4l2-ctrls: replace BUG_ON by WARN_ONHans Verkuil
BUG_ON is unnecessarily strict. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drivers/media/usb/usbtv/usbtv-core.c:119:22: sparse: symbol ↵Fengguang Wu
'usbtv_id_table' was not declared. Should it be static? tree: git://linuxtv.org/media_tree.git master head: a3550ea665acd1922df8275379028c1634675629 commit: a3550ea665acd1922df8275379028c1634675629 [499/499] [media] usbtv: split core and video implementation reproduce: make C=1 CF=-D__CHECK_ENDIAN__ sparse warnings: (new ones prefixed by >>) >> drivers/media/usb/usbtv/usbtv-core.c:119:22: sparse: symbol 'usbtv_id_table' was not declared. Should it be static? >> drivers/media/usb/usbtv/usbtv-core.c:129:19: sparse: symbol 'usbtv_usb_driver' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11drx-j: Fix post-BER calculus on QAM modulationMauro Carvalho Chehab
There are two troubles there: 1) the bit error measure were not accumulating; 2) it was missing the bit count. Fix them. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11drx-j: use ber_count varMauro Carvalho Chehab
drivers/media/dvb-frontends/drx39xyj/drxj.c: In function 'ctrl_get_qam_sig_quality': drivers/media/dvb-frontends/drx39xyj/drxj.c:9468:6: warning: variable 'ber_cnt' set but not used [-Wunused-but-set-variable] u32 ber_cnt = 0; /* BER count */ ^ By reading the comment, it is said that BER should be calculated as: qam_pre_rs_ber = frac_times1e6( ber_cnt, rs_bit_cnt ); Also, it makes sense to take the mantissa into account, so fix the code to do what's commented. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: enable DVBv5 statsMauro Carvalho Chehab
Now that everything is set, let's enable DVBv5 stats, for applications that support it. DVBv3 apps will still work. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: Fix detection of no signalMauro Carvalho Chehab
When the signal is 7, it means that no signal was received. Value experimentally measured. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: properly handle bit counts on statsMauro Carvalho Chehab
Instead of just assuming that the min resolution is 1E-6, pass both bit error and bit counts for userspace to calculate BER. The same applies for PER, for 8VSB. It is not clear how to get the packet count for QAM. So, for now, don't expose PER for QAM. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: Prepare to use DVBv5 statsMauro Carvalho Chehab
Convert the stats internally to use DVBv5. For now, it will keep showing everything via DVBv3 API only, as the .len value were not initialized. That allows testing if the new stats code didn't break anything. A latter patch will add the final bits for the DVBv5 stats to fully work. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: re-add get_sig_strength()Mauro Carvalho Chehab
We'll need to use this function. Restore it from the git history. This function will be used on the next patch. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: Don't use "state" for DVB lock stateMauro Carvalho Chehab
State is already used on other places for the state struct. Don't use it here, to avoid troubles with latter patches. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: get rid of some unused varsMauro Carvalho Chehab
As reported when compiled with W=1: drivers/media/dvb-frontends/drx39xyj/drxj.c: In function ‘ctrl_set_channel’: drivers/media/dvb-frontends/drx39xyj/drxj.c:10340:26: warning: variable ‘common_attr’ set but not used [-Wunused-but-set-variable] struct drx_common_attr *common_attr = NULL; ^ drivers/media/dvb-frontends/drx39xyj/drxj.c:10336:6: warning: variable ‘intermediate_freq’ set but not used [-Wunused-but-set-variable] s32 intermediate_freq = 0; Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: propagate returned error from request_firmware()Mauro Carvalho Chehab
Fix a smatch warning: drivers/media/dvb-frontends/drx39xyj/drxj.c:11711 drx_ctrl_u_code() info: why not propagate 'rc' from request_firmware() instead of (-2)? Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: Fix usage of drxj_close()Mauro Carvalho Chehab
This function is currently not used. However, it was meant to be called at device release. So, add it there. While here, remove the bad check, as reported by Dan, as smatch warning: drivers/media/dvb-frontends/drx39xyj/drxj.c:20041 drxj_close() warn: variable dereferenced before check 'demod' (see line 20036) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: remove external symbolsMauro Carvalho Chehab
This driver doesn't export any external symbol, except for the attach() method. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: get rid of dead codeMauro Carvalho Chehab
There are large chunks of code at drx-j that aren't used. Most of them are due to analog TV support. Well, just enabling them won't make analog support work, as devices with DRX and analog support requires an extra chip (avf4910). We don't have drivers for it, nor the current device that uses this frontend has support for analog TV. So, let's just get rid of this code. If latter needed, this patch can easily be reverted from git history. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11[media] drx-j: don't use mc_info before checking if its not NULLMauro Carvalho Chehab
smatch warning: drivers/media/dvb-frontends/drx39xyj/drxj.c:20803 drx_ctrl_u_code() warn: variable dereferenced before check 'mc_info' (see line 20800) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-14 14:27:20 +0000