summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-06-08drm/nv50: fix iommu errors caused by device reading from address 0Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nouveau: off by one in init_i2c_device_find()Dan Carpenter
dcb->i2c[] has DCB_MAX_NUM_I2C_ENTRIES entries. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08nouveau: off by one in nv50_gpio_location()Dan Carpenter
If "gpio->line" is 32 then "nv50_gpio_reg[gpio->line >> 3]" reads past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nouveau: completely fail init if we fail to map the PRAMIN BARBen Skeggs
On cards where there's a specific BAR for PRAMIN, we used to try and fall back to the "legacy" aperture within the mmio BAR. This is doomed to cause problems, so lets just fail completely as there's obviously something else very wrong anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nouveau: match U/DP script against SOR linkBen Skeggs
It appears version 0x21 'U' and 'd' tables require us to take the SOR link into account when selecting the appropriate table for a particular output. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: resurrect printing power statesRafał Miłecki
debug only agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms: add trivial debugging for voltageRafał Miłecki
agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/r600+: use voltage from requested clock mode (v3)Rafał Miłecki
This fixes FDO bug #28375, it's kind of regression, so quite important to have it for .35. V2: Fix on RV770+ as well. All other chipsets have only one clock mode per state. V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen. agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: track current voltage (v2)Alex Deucher
track the current voltage level and avoid setting it if the requested voltage is already set. v2: check voltage type before checking current voltage Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880Alex Deucher
The vddc value in the power tables is not an actual voltage like on discrete r6xx/r7xx/evergreen systems, but instead has a symbolic meaning (e.g., NONE, LOW, HIGH, etc.). See atombios.h Most RS780/RS880 vbioses don't have a SetVoltage table anyway, so it shouldn't be doing anything to the hardware at the moment. I need to figure out how voltage is supposed to work on the newer IGPs; until then, disable it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms: fix typo in printing the HPD infoAlex Deucher
I forgot to fix this in 8e36ed00842668a39a6ed1b0a00b8ac92b7c4cd5 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: add mid profileAlex Deucher
This adds an additional profile, mid, to the pm profile code which takes the place of the old low profile. The default behavior remains the same, e.g., auto profile now selects between mid and high profiles based on power source, however, you can now manually force the low profile which was previously only available as a dpms off state. Enabling the low profile when the displays are on has been known to cause display corruption in some cases. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: Misc fixesAlex Deucher
- don't rest the power state in pm_init() We already boot up to the default power state. Note this patch relies on: drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+ To make sure the default power state matches the boot up state. - In the pm resume path asic init will have set the power state back to the default so reset the tracking state values. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/combios: fix typo in voltage fixAlex Deucher
Noticed by Rafał Miłecki. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/evergreen: set accel_enabledAlex Deucher
This is needed to enable accel in the ddx. However, due to a bug in older versions of the ddx, it relies on accel being disabled in order to load properly on evergreen chips. To maintain compatility, we add a new get accel param and call that from the ddx. The old one always returns false for evergreen cards. [this fixes a regression with older userspaces on newer kernels]. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/vmwgfx: return -EFAULT for copy_to_user errorsDan Carpenter
copy_to/from_user() returns the number of bytes remaining to be copied but we want to return a negative error code here. This gets returned to userspace. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/drm_crtc: return -EFAULT on copy_to_user errorsDan Carpenter
copy_from_user() returns the number of bytes left to be copied but we want to return a negative error code here. This is in the ioctl handler so the error code get returned to userspace. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/fb: use printk to print out the switching to text mode error.Dave Airlie
using DRM_ERROR, results in people blaming the drm code for the oops, and not looking at the oops. (sadly yes I've gotten reports). Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon: fix PM on non-vram cards.Dave Airlie
PM attemps to unmap objects that aren't actually mapped into userspace ever, so just don't bother unmapping them at this point, since all you are doing is nothing. We should be making sure all access to these objects are locked in kernel space instead. In theory the VRAM gart table is already done, and both the shaders and stolen vga memory blocks are never accessed at runtime. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16127 Reported-by: Jure Repnic <jlp.bugs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm: Propagate error from drm_fb_helper_init().Chris Wilson
The previous commit fixes the problem, these commits make sure we actually fail properly if it happens again. I've squashed the commits from Chris since they are all fixing one issue. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/i915: fix oops on single crtc devices.Dave Airlie
(regression fix since fbdev/kms rework). My fb rework didn't remember about the 84/65s. Reported-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-06Revert "tty: fix a little bug in scrup, vt.c"Linus Torvalds
This reverts commit 962400e8fd29981a7b166e463dd143b6ac6a3e76, which was entirely bogus. The code used to multiply the character offset by "vc->vc_cols", and that's actually correct, because 'd' itself is an 'unsigned short'. So the pointer arithmetic already takes the size of a VGA character into account. Changing it to use vc_size_row (which is just "vc_cols" shifted up to take the size of the character into account) ends up multiplying with the VGA character size twice. This got reported as bugs for various other subsystems, because what it actually results in is writing the 16-bit vc_video_erase_char pattern (usually 0x0720: 0x07 is the default attribute, 0x20 is ASCII space) into some random other allocation. So Markus ended up reporting this as a ext4 bug, while to Torsten Kaiser it looked like a problem with KMS or libata. Jeff Chua saw it in different places. And finally - Justin Mattock had slab poisoning enabled, and saw it as a slab poison overwritten. And bisected and reverted this to verify the buggy commit. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-bisected-and-tested-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Dave Airlie <airlied@redhat.com> Cc: Frank Pan <frankpzh@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05Linux 2.6.35-rc2v2.6.35-rc2Linus Torvalds
2010-06-05drm/i915: Move non-phys cursors into the GTTChris Wilson
Cursors need to be in the GTT domain when being accessed by the GPU. Previously this was a fortuitous byproduct of userspace using pwrite() to upload the image data into the cursor. The redundant clflush was removed in commit 9b8c4a and so the image was no longer being flushed out of the caches into main memory. One could also devise a scenario where the cursor was rendered by the GPU, prior to being attached as the cursor, resulting in similar corruption due to the missing MI_FLUSH. Fixes: Bug 28335 - Cursor corruption caused by commit 9b8c4a0b21 https://bugs.freedesktop.org/show_bug.cgi?id=28335 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix remaining racy updates of EXT4_I(inode)->i_flags ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files
2010-06-05ext4: Fix remaining racy updates of EXT4_I(inode)->i_flagsDmitry Monakhov
A few functions were still modifying i_flags in a racy manner. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-05Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: improve xfs_isilocked xfs: skip writeback from reclaim context xfs: remove done roadmap item from xfs-delayed-logging-design.txt xfs: fix race in inode cluster freeing failing to stale inodes xfs: fix access to upper inodes without inode64 xfs: fix might_sleep() warning when initialising per-ag tree fs/xfs/quota: Add missing mutex_unlock xfs: remove duplicated #include xfs: convert more trace events to DEFINE_EVENT xfs: xfs_trace.c: remove duplicated #include xfs: Check new inode size is OK before preallocating xfs: clean up xlog_align xfs: cleanup log reservation calculactions xfs: be more explicit if RT mount fails due to config xfs: replace E2BIG with EFBIG where appropriate
2010-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) X25: remove duplicated #include tcp: use correct net ns in cookie_v4_check() rps: tcp: fix rps_sock_flow_table table updates ppp_generic: fix multilink fragment sizes syncookies: remove Kconfig text line about disabled-by-default ixgbe: only check pfc bits in hang logic if pfc is enabled net: check for refcount if pop a stacked dst_entry ixgbe: return IXGBE_ERR_RAR_INDEX when out of range act_pedit: access skb->data safely sfc: Store port number in net_device::dev_id epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIAN tehuti: return -EFAULT on copy_to_user errors isdn/kcapi: return -EFAULT on copy_from_user errors e1000e: change logical negate to bitwise sfc: Get port number from CS_PORT_NUM, not PCI function number cls_u32: use skb_header_pointer() to dereference data safely TCP: tcp_hybla: Fix integer overflow in slow start increment act_nat: fix the wrong checksum when addr isn't in old_addr/mask net/fec: fix pm to survive to suspend/resume korina: count RX DMA OVR as rx_fifo_error ...
2010-06-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: remove obsolete declarations of cache constructor and destructor nilfs2: fix style issue in nilfs_destroy_cachep
2010-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Minix: Clean up left over label fix truncate inode time modification breakage fix setattr error handling in sysfs, configfs fcntl: return -EFAULT if copy_to_user fails wrong type for 'magic' argument in simple_fill_super() fix the deadlock in qib_fs mqueue doesn't need make_bad_inode()
2010-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: fix bne2 "gave up waiting for init of module libcrc32c" module: verify_export_symbols under the lock module: move find_module check to end module: make locking more fine-grained. module: Make module sysfs functions private. module: move sysfs exposure to end of load_module module: fix kdb's illicit use of struct module_use. module: Make the 'usage' lists be two-way
2010-06-05module: fix bne2 "gave up waiting for init of module libcrc32c"Rusty Russell
Problem: it's hard to avoid an init routine stumbling over a request_module these days. And it's not clear it's always a bad idea: for example, a module like kvm with dynamic dependencies on kvm-intel or kvm-amd would be neater if it could simply request_module the right one. In this particular case, it's libcrc32c: libcrc32c_mod_init crypto_alloc_shash crypto_alloc_tfm crypto_find_alg crypto_alg_mod_lookup crypto_larval_lookup request_module If another module is waiting inside resolve_symbol() for libcrc32c to finish initializing (ie. bne2 depends on libcrc32c) then it does so holding the module lock, and our request_module() can't make progress until that is released. Waiting inside resolve_symbol() without the lock isn't all that hard: we just need to pass the -EBUSY up the call chain so we can sleep where we don't hold the lock. Error reporting is a bit trickier: we need to copy the name of the unfinished module before releasing the lock. Other notes: 1) This also fixes a theoretical issue where a weak dependency would allow symbol version mismatches to be ignored. 2) We rename use_module to ref_module to make life easier for the only external user (the out-of-tree ksplice patches). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tim Abbot <tabbott@ksplice.com> Tested-by: Brandon Philips <bphilips@suse.de>
2010-06-05module: verify_export_symbols under the lockRusty Russell
It disabled preempt so it was "safe", but nothing stops another module slipping in before this module is added to the global list now we don't hold the lock the whole time. So we check this just after we check for duplicate modules, and just before we put the module in the global list. (find_symbol finds symbols in coming and going modules, too). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-06-05module: move find_module check to endLinus Torvalds
I think Rusty may have made the lock a bit _too_ finegrained there, and didn't add it to some places that needed it. It looks, for example, like PATCH 1/2 actually drops the lock in places where it's needed ("find_module()" is documented to need it, but now load_module() didn't hold it at all when it did the find_module()). Rather than adding a new "module_loading" list, I think we should be able to just use the existing "modules" list, and just fix up the locking a bit. In fact, maybe we could just move the "look up existing module" a bit later - optimistically assuming that the module doesn't exist, and then just undoing the work if it turns out that we were wrong, just before adding ourselves to the list. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-06-05module: make locking more fine-grained.Rusty Russell
Kay Sievers <kay.sievers@vrfy.org> reports that we still have some contention over module loading which is slowing boot. Linus also disliked a previous "drop lock and regrab" patch to fix the bne2 "gave up waiting for init of module libcrc32c" message. This is more ambitious: we only grab the lock where we need it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Brandon Philips <brandon@ifup.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05module: Make module sysfs functions private.Rusty Russell
These were placed in the header in ef665c1a06 to get the various SYSFS/MODULE config combintations to compile. That may have been necessary then, but it's not now. These functions are all local to module.c. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <randy.dunlap@oracle.com>
2010-06-05module: move sysfs exposure to end of load_moduleRusty Russell
This means a little extra work, but is more logical: we don't put anything in sysfs until we're about to put the module into the global list an parse its parameters. This also gives us a logical place to put duplicate module detection in the next patch. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-06-05module: fix kdb's illicit use of struct module_use.Rusty Russell
Linus changed the structure, and luckily this didn't compile any more. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Martin Hicks <mort@sgi.com>
2010-06-05module: Make the 'usage' lists be two-wayLinus Torvalds
When adding a module that depends on another one, we used to create a one-way list of "modules_which_use_me", so that module unloading could see who needs a module. It's actually quite simple to make that list go both ways: so that we not only can see "who uses me", but also see a list of modules that are "used by me". In fact, we always wanted that list in "module_unload_free()": when we unload a module, we want to also release all the other modules that are used by that module. But because we didn't have that list, we used to first iterate over all modules, and then iterate over each "used by me" list of that module. By making the list two-way, we simplify module_unload_free(), and it allows for some trivial fixes later too. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)
2010-06-04X25: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/wan/x25_asy.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04tcp: use correct net ns in cookie_v4_check()Eric Dumazet
Its better to make a route lookup in appropriate namespace. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04rps: tcp: fix rps_sock_flow_table table updatesEric Dumazet
I believe a moderate SYN flood attack can corrupt RFS flow table (rps_sock_flow_table), making RPS/RFS much less effective. Even in a normal situation, server handling short lived sessions suffer from bad steering for the first data packet of a session, if another SYN packet is received for another session. We do following action in tcp_v4_rcv() : sock_rps_save_rxhash(sk, skb->rxhash); We should _not_ do this if sk is a LISTEN socket, as about each packet received on a LISTEN socket has a different rxhash than previous one. -> RPS_NO_CPU markers are spread all over rps_sock_flow_table. Also, it makes sense to protect sk->rxhash field changes with socket lock (We currently can change it even if user thread owns the lock and might use rxhash) This patch moves sock_rps_save_rxhash() to a sock locked section, and only for non LISTEN sockets. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04ppp_generic: fix multilink fragment sizesBen McKeegan
Fix bug in multilink fragment size calculation introduced by commit 9c705260feea6ae329bc6b6d5f6d2ef0227eda0a "ppp: ppp_mp_explode() redesign" Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04syncookies: remove Kconfig text line about disabled-by-defaultFlorian Westphal
syncookies default to on since e994b7c901ded7200b525a707c6da71f2cf6d4bb (tcp: Don't make syn cookies initial setting depend on CONFIG_SYSCTL). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04ixgbe: only check pfc bits in hang logic if pfc is enabledJohn Fastabend
Only check pfc bits in hang logic if PFC is enabled. Previously, if DCB was enabled but PFC was disabled the incorrect pause bits would be checked. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04net: check for refcount if pop a stacked dst_entrySteffen Klassert
xfrm triggers a warning if dst_pop() drops a refcount on a noref dst. This patch changes dst_pop() to skb_dst_pop(). skb_dst_pop() drops the refcnt only on a refcounted dst. Also we don't clone the child dst_entry, so it is not refcounted and we can use skb_dst_set_noref() in xfrm_output_one(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add Cintiq 21UX2 and Intuos4 WL Input: ads7846 - fix compiler warning in ads7846_probe() Input: tps6507x-ts - a couple work queue cleanups Input: s3c2410_ts - tone down logging Input: s3c2410_ts - fix build error due to ADC Kconfig rename
2010-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Make intc messages consistent via pr_fmt. sh: make sure static declaration on ms7724se sh: make sure static declaration on mach-migor sh: make sure static declaration on mach-ecovec24 sh: make sure static declaration on mach-ap325rxa clocksource: sh_cmt: compute mult and shift before registration clocksource: sh_tmu: compute mult and shift before registration sh: PIO disabling for x3proto and urquell. sh: mach-sdk7786: conditionally disable PIO support. sh: support for platforms without PIO. usb: r8a66597-hcd pio to mmio accessor conversion. usb: gadget: r8a66597-udc pio to mmio accessor conversion. usb: gadget: m66592-udc pio to mmio accessor conversion. sh: add romImage MMCIF boot for sh7724 and Ecovec V2 sh: add boot code to MMCIF driver header sh: prepare MMCIF driver header file sh: allow romImage data between head.S and the zero page sh: Add support MMCIF for ecovec sh: remove duplicated #include input: serio: disable i8042 for non-cayman sh platforms. ...
2010-06-04Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (83 commits) i7core_edac: Better describe the supported devices Add support for Westmere to i7core_edac driver i7core_edac: don't free on success i7core_edac: Add support for X5670 Always call i7core_[ur]dimm_check_mc_ecc_err i7core_edac: fix memory leak of i7core_dev EDAC: add __init to i7core_xeon_pci_fixup i7core_edac: Fix wrong device id for channel 1 devices i7core: add support for Lynnfield alternate address i7core_edac: Add initial support for Lynnfield i7core_edac: do not export static functions edac: fix i7core build edac: i7core_edac produces undefined behaviour on 32bit i7core_edac: Use a more generic approach for probing PCI devices i7core_edac: PCI device is called NONCORE, instead of NOCORE i7core_edac: Fix ringbuffer maxsize i7core_edac: First store, then increment i7core_edac: Better parse "any" addrmask i7core_edac: Use a lockless ringbuffer edac: Create an unique instance for each kobj ...
2010-06-04Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (87 commits) V4L/DVB: ivtv: Timing tweaks and code re-order to try and improve stability V4L/DVB: ivtv: Avoid accidental video standard change V4L/DVB: ivtvfb : Module load / unload fixes V4L/DVB: cx2341x: Report correct temporal setting for log-status V4L/DVB: cx18, cx23885, v4l2 doc, MAINTAINERS: Update Andy Walls' email address V4L/DVB: drivers/media: Eliminate a NULL pointer dereference V4L/DVB: dvb-core: Fix ULE decapsulation bug V4L/DVB: Bug fix: make IR work again for dm1105 V4L/DVB: media/IR: nec-decoder needs to select BITREV V4L/DVB: video/saa7134: change dprintk() to i2cdprintk() V4L/DVB: video/saa7134: remove duplicate break V4L/DVB: IR/imon: add auto-config for 0xffdc rf device V4L/DVB: IR/imon: clean up usage of bools V4L/DVB: em28xx: remove unneeded null checks V4L/DVB: ngene: remove unused #include <linux/version.h> V4L/DVB: ak881x needs slab.h V4L/DVB: FusionHDTV: Use quick reads for I2C IR device probing V4L/DVB: Technotrend S2-3200 ships with a TT 1500 remote V4L/DVB: drivers/media: Use kzalloc V4L/DVB: m920x: Select simple tuner ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 02:13:06 +0000