summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-03-11OMAP2PLUS: clocks: Align DSS clock names and rolesSumit Semwal
Currently, clock database has <dev, clock-name> tuples for DSS2. Because of this, the clock names are different across different OMAP platforms. This patch aligns the DSS2 clock names and roles across OMAP 2420, 2430, 3xxx, 44xx platforms in the clock databases, hwmod databases for opt-clocks, and DSS clock handling. This ensures that clk_get/put/enable/disable APIs in DSS can use uniform role names. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2,3: DSS2: Get DSS IRQ from platform deviceSenthilvadivu Guruswamy
DSS IRQ number can be obtained from platform_get_irq(). This API in turn picks the right IRQ number belonging to HW IP from the hwmod database. So hardcoding of IRQ number could be removed. This IRQ is stored in dss_irq as part of dss structure, and freed it in dss_exit(). Reviewed-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2,3: DSS2: Use platform device to get baseaddrSenthilvadivu Guruswamy
DSS, DISPC, DSI, RFBI, VENC baseaddr can be obtained from platform_get_resource(). This API in turn picks the right silicon baseaddr from the hwmod database. So hardcoding of base addr could be removed. Reviewed-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2,3: DSS2: replace printk with dev_dbg in initSumit Semwal
This patch replaces printk's in the init/probe functions to dev_dbg for boot time optimization. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: DSI: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for DSI is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, vdds_dsi regulator handling is copied to dsi.c, since vdds_dsi regulator is needed by dpi_init() too. Board files are updated accordingly to add 2 instances of vdds_dsi regulator. DSI platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: VENC: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for VENC is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, venc_vdda_dac reading is moved to venc.c. VENC platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: DISPC: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for DISPC is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. DISPC platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for RFBI is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. RFBI platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: Move clocks from core driver to dss driverSenthilvadivu Guruswamy
All clock management is moved to dss platform driver. clk_get/put APIs use dss device instead of core platform device. Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So the device name is changed from omapdss to omapdss_dss in 2420, 2430, 3xxx clock database files. Now the core driver "omapdss" only takes care of panel registration with the custom bus. core driver also uses the clk_enable() / clk_disable() APIs exposed by DSS for clock management. DSS driver would do clock management of clocks needed by DISPC, RFBI, DSI, VENC TODO: The clock content would be adapted to omap_hwmod in a seperate series. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: DSS: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver of DSS is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. DSS platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2,3: DSS2: Build omap_device for each DSS HWIPSenthilvadivu Guruswamy
Looks up the hwmod database for each of the given DSS HW IP and builds omap_device which inturn does the platform device register for each of DSS HW IP Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: remove forced clk-disable from omap_dss_removeSumit Semwal
As part of omap hwmod changes, DSS will not be the only controller of its clocks. hwmod initialization also enables the interface clocks, and manages them. So, when DSS is built as a module, omap_dss_remove doesn't try to disable all clocks that have a higher usecount. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP: 3430SDP: Remove unused vdda_dac supplyTomi Valkeinen
Remove extra vdda_dac supply definition. It was a leftover from conflict resolution. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-10Merge branch 'for_2.6.39/pm-misc' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-10OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocationSantosh Shilimkar
On the newer ARM processors like CortexA8, CortexA9, the caches can be speculatively loaded while they are getting flushed. Clear the SCTLR C bit to prevent further data cache allocation as part of cache clean routine Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-10OMAP3: PM: Remove un-necessary cp15 registers form low power cpu contextSantosh Shilimkar
The current code saves few un-necessary registers which are read-only or write-only, unused CP15 registers. Remove them and keep only necessary CP15 registers part of low power context save/restore. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-10OMAP3: PM: Allow the cache clean when L1 is lost.Santosh Shilimkar
When L1 cache is suppose to be lost, it needs to be cleaned before entrering to the low power mode. While at this, also fix few comments and remove un-necessary clean_l2 lable. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-10OMAP3: PM: Fix the MMU on sequence in the asm codeSantosh Shilimkar
Add necessary barriers after enabling MMU. Also use the sane way to load pc and jump to it instead of executing ldma first up. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-10OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 onesSantosh Shilimkar
On ARMv7 dsb, dmb instructions are supported and can be used directly instead of their cp15 equivalnet. Also remove the opcodes for smc and use the available instruction directly in OMAP3 low power asm code Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP2+: smartreflex: remove SR debug directory in omap_sr_remove()Anand S Sawant
omap_sr_probe() creates the smartreflex debug directory and its underlying nvalue debug directory. These directories are removed in omap_sr_remove(). Basic smartreflex functionality tested on OMAP3630 Zoom3 & OMAP4430 SDP Signed-off-by: Anand S Sawant <sawant@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap3: Thumb-2 compatibility for sleep34xx.SDave Martin
* Build unconditionally as ARM for correct interoperation with OMAP firmware. * Fix an out-of-range ADR when building for ARM. * Remove deprecated PC-relative stores. * Add the required ENDPROC() directive for each ENTRY(). * .align before data words. * Handle non-interworking return from v7_flush_dcache_all. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap3: Thumb-2 compatibility for sram34xx.SDave Martin
* Build unconditionally as ARM for correct interoperation with OMAP firmware. * Remove deprecated PC-relative stores * Add the required ENDPROC() directive for each ENTRY(). * .align before data words Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap3: Remove hand-encoded SMC instructionsDave Martin
For various reasons, Linux now only officially supports being built with tools which are new enough to understand the SMC instruction. Replacing the hand-encoded instructions when the mnemonic also allows for correct assembly in Thumb-2 (otherwise, the result is random data in the middle of the code). The Makefile already ensures that this file is built with a high enough gcc -march= flag (armv7-a). Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap4: Convert END() to ENDPROC() for correct linkage with ↵Dave Martin
CONFIG_THUMB2_KERNEL Code marked with ENTRY() also needs a matching ENDPROC() directive, in order to ensure that the type and instruction set of the symbol are correctly annotated. ENDPROC() tags the affected symbol as a function symbol, which will ensure that link-time fixups don't accidentally switch to the wrong instruction set. Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09ARM: omap4: Provide do_wfi() for Thumb-2Dave Martin
For CONFIG_THUMB2_KERNEL, the existing definition of do_wfi() will insert invalid code into the instruction stream. Any assembler which can assemble Thumb-2 is guaranteed to accept the "wfi" mnemonic, so for the Thumb-2 case, just use the mnemonic. The ARM case is left as-is. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3: PM: Initialize IVA only if availableSanjeev Premi
IVA device is not present in many OMAP3 variants. This patch ensures that initialization is tied to the presence of IVA on the device. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3: PM: Set/clear T2 bit for Smartreflex on TWLThara Gopinath
Voltage control on TWL can be done using VMODE/I2C1/I2C_SR. Since almost all platforms use I2C_SR on omap3, omap3_twl_init by default expects that OMAP's I2C_SR is plugged in to TWL's I2C and calls omap3_twl_set_sr_bit. On platforms where I2C_SR is not connected, the board files are expected to call omap3_twl_set_sr_bit(false) to ensure that I2C_SR path is not set for voltage control and prevent the default behavior of omap3_twl_init. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09omap3: cpuidle: Add description field to each C-state.Santosh Shilimkar
Add a description field to each idle C-state. This helps to give better data with PowerTop and one don't have to refer to the code to link what Cx means from system point of view while analysing PowerTop data. No functional change. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09omap3: pm: Use exported set_cr() instead of a custom one.Santosh Shilimkar
Remove the custom restore_control_register() and use the exported set_cr() instead to set the system control register(SCTRL) value. No functional change. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clearPaul Walmsley
The OMAP2 and OMAP3 PM code clears clockdomain wakeup and sleep dependencies. This is unnecessary after commit 6f7f63cc9adf3192e6fcac4e8bed5cc10fd924aa ("OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts") which clears these dependencies during clockdomain init. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP2+: remove unused UART base addresses from omap_globalsKevin Hilman
Now that omap_hwmod + omap_device is used for OMAP UART device and driver code, we no longer need the UART physical addresses in omap_globals. Note that the #defines for the base addresses are still left in <plat/serial.h> since they are used by DEBUG_LL and uncompress code. Build tested for OMAP1 (omap1_defconfig) and OMAP2+ (omap2plus_defconfig) Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP: PM: SmartReflex: fix potential NULL dereferenceVasiliy Kulikov
kzalloc() may fail, if so return -ENOMEM. Also Walter Harms suggested to use kasprintf() instead of kzalloc+strcpy+strcat. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3: beagle xm: enable up to 800MHz OPPNishanth Menon
OMP3630 silicon can enable higher frequencies only depending on the board characteristics meeting the recommended standards, and has to be selectively toggled. Beagle XM uses 3730 variant and the board design allows enabling 800MHz and 1GHz OPPs. However, We need Smart reflex class 1.5 and ABB to enable 1GHz safely. For the moment, we tweak the default table to allow for 800Mhz OPP usage. Reported-by: Koen Kooi <koen@beagleboard.org> Tested-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3|4: OPP: make omapx_opp_init non-staticMenon, Nishanth
omap3 and omap4 opp_init should be made non-static to allow for platform specific opp table tweaking. making these static conflicts with the definition in pm.h(global) as well. we include pm.h as well to ensure that there are no such prototype conflicts with actual implementation in the future. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUMRicardo Salveti de Araujo
In case in user has a OMAP3630 < ES1.2 the kernel should warn the user about the ERRATUM, but using pr_warn instead of WARN_ON is already enough, as there is nothing else the user can do besides changing the board. Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09MAINTAINERS: update Kevin's email for OMAP PM sectionKevin Hilman
Change my email to TI email address for OMAP PM maintenance. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09Merge branch 'omap-l3-for-next' of ↵Tony Lindgren
git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into omap-for-linus
2011-03-09OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interfacePaul Walmsley
According to the hwmod interface data, the DSS submodule "VENC" uses a clock, "dss_54m_fck"/"dss_tv_fck", which the PRCM cannot autoidle. By default, the hwmod code assumes that interface clocks can be autoidled by the PRCM. When the interface clock can't be autoidled by the PRCM, those interfaces must be marked with the OCPIF_SWSUP_IDLE flag. Otherwise, the "interface clock" will always have a non-zero use count, and the device won't enter idle. This problem was observed on N8x0. Fix the immediate problem by marking the VENC interface with the OCPIF_SWSUP_IDLE flag. But it's not clear that "dss_54m_fck"/"dss_tv_fck" is really the correct interface clock for VENC. It may be that the VENC interface should use a hardware-autoidling interface clock. This is the situation on OMAP4, which uses "l3_div_ck" as the VENC interface clock, which can be autoidled by the PRCM. Clarification from TI is needed. Problem found and patch tested on N8x0 by Tony Lindgren <tony@atomide.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Senthilvadivu Guruswamy <svadivu@ti.com> Cc: Sumit Semwal <sumit.semwal@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-09OMAP4: l3: Introduce l3-interconnect error handling driverSantosh Shilimkar
The driver provides the information regarding the ocp errors that gets logged in the interconnect. The error information gives the detail regarding the target that was attempted to be accessed and its corresponding address. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-09OMAP4: Initialise the l3 device with the hwmod data.sricharan
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod data base. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-09OMAP4: hwmod_data: Add address space and irq in L3 hwmod.sricharan
Add the address spaces, irqs of the l3 interconnect to the hwmod data. The hwmod change is aligned with Benoit Cousson. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-09OMAP3: l3: Introduce l3-interconnect error handling driverFelipe Balbi
The driver provides the information regarding the ocp errors that gets logged in the interconnect.The error info provides the details regarding the master or the target that generated the error, type of error and the corresponding address. The stack dump is also provided. Signed-off-by: sricharan <r.sricharan@ti.com> [r.sricharan@ti.com: Enhacements, major cleanup and made it functional] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [santosh.shilimkar@ti.com: Driver design changes as per OMAP4 version] Signed-off-by: Felipe Balbi <balbi@ti.com> [balbi@ti.com: Initial version of the driver] Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-09OMAP3: devices: Initialise the l3 device with the hwmod data.sricharan
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod database. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-09OMAP3: hwmod_data: Add address space and irq in L3 hwmod.sricharan
Add the address spaces, irqs of the l3 interconnect to the hwmod data. The hwmod changes are aligned with Benoit Cousson. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-08audio : AM3517 : Adding i2c info for AIC23 codecAbhilash Vadakkepat Koyamangalath
The i2c_board_info entry supporting AIC23 codec was added into the i2c2 bus. Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-08OMAP1: McBSP: fix build break for non-multi-OMAP1 configsPaul Walmsley
Commit 3cf32bba8ca0e0052ca41d74d455a5805b7fea85 ("OMAP: McBSP: Convert McBSP to platform device model") breaks compilation with non-multi-OMAP1 configs: CC arch/arm/mach-omap1/mcbsp.o arch/arm/mach-omap1/mcbsp.c: In function 'omap1_mcbsp_init': arch/arm/mach-omap1/mcbsp.c:384: warning: dereferencing 'void *' pointer arch/arm/mach-omap1/mcbsp.c:387: error: invalid use of void expression arch/arm/mach-omap1/mcbsp.c:390: warning: dereferencing 'void *' pointer arch/arm/mach-omap1/mcbsp.c:393: error: invalid use of void expression Fix by avoiding NULL dereferences. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> [tony@atomide.com: updated description not to remove unnecessary branch name] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-07Linux 2.6.38-rc8v2.6.38-rc8Linus Torvalds
2011-03-07Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410 ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410 ARM: S3C64XX: Reduce output of s3c64xx_dma_init1() ARM: S3C64XX: Tone down SDHCI debugging ARM: S3C64XX: Add clock for i2c1 ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices ARM: S3C64XX: Fix keypad setup to configure correct number of rows ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02 ARM: S5P64X0: Fix number of GPIO lines in Bank F ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02
2011-03-07Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: davinci: cpufreq: fix section mismatch warning DaVinci: fix compilation warnings in <mach/clkdev.h> davinci: tnetv107x: fix register indexing for GPIOs numbers > 31 davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio ARM: pxa/tosa: register wm9712 codec device ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100 ARM: 6761/1: Update number of VIC for S5PV210 ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request ARM: 6765/1: remove obsolete comment from asm/mach/arch.h ARM: 6757/1: fix tlb.h induced linux/swap.h build failure
2011-03-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdio: Allow sdio operations in other threads during sdio_add_func()