summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-03-21Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull SPI changes for v3.4 from Grant Likely: "Mostly a bunch of new drivers and driver bug fixes; but this also includes a few patches that create a core message queue infrastructure for the spi subsystem instead of making each driver open code it." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits) spi/fsl-espi: Make sure pm is within 2..32 spi/fsl-espi: make the clock computation easier to read spi: sh-hspi: modify write/read method spi: sh-hspi: control spi clock more correctly spi: sh-hspi: convert to using core message queue spi: s3c64xx: Fix build spi: s3c64xx: remove unnecessary callback msg->complete spi: remove redundant variable assignment spi: release lock on error path in spi_pump_messages() spi: Compatibility with direction which is used in samsung DMA operation spi-topcliff-pch: add recovery processing in case wait-event timeout spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control spi-topcliff-pch: Fix issue for transmitting over 4KByte spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info spi/imx: simplify error handling to free gpios spi: Convert to DEFINE_PCI_DEVICE_TABLE spi: add Broadcom BCM63xx SPI controller driver SPI: add CSR SiRFprimaII SPI controller driver spi-topcliff-pch: fix -Wuninitialized warning spi: Mark spi_register_board_info() __devinit ...
2012-03-21Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull core device tree changes for Linux v3.4 from Grant Likely: "This branch contains a minor documentation addition, a utility function for parsing string properties needed by some of the new ARM platforms, disables dynamic DT code that isn't used anywhere but on a few PPC machines, and exports DT node compatible data to userspace via UEVENT properties. Nothing earth shattering here." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6: of: Only compile OF_DYNAMIC on PowerPC pseries and iseries arm/dts: OMAP3: Add omap3evm and am335xevm support drivercore: Output common devicetree information in uevent of: Add of_property_match_string() to find index into a string list
2012-03-21Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull irq_domain support for all architectures from Grant Likely: "Generialize powerpc's irq_host as irq_domain This branch takes the PowerPC irq_host infrastructure (reverse mapping from Linux IRQ numbers to hardware irq numbering), generalizes it, renames it to irq_domain, and makes it available to all architectures. Originally the plan has been to create an all-new irq_domain implementation which addresses some of the powerpc shortcomings such as not handling 1:1 mappings well, but doing that proved to be far more difficult and invasive than generalizing the working code and refactoring it in-place. So, this branch rips out the 'new' irq_domain and replaces it with the modified powerpc version (in a fully bisectable way of course). It converts all users over to the new API and makes irq_domain selectable on any architecture. No architecture is forced to enable irq_domain, but the infrastructure is required for doing OpenFirmware style irq translations. It will even work on SPARC even though SPARC has it's own mechanism for translating irqs at boot time. MIPS, microblaze, embedded x86 and c6x are converted too. The resulting irq_domain code is probably still too verbose and can be optimized more, but that can be done incrementally and is a task for follow-on patches." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits) dt: fix twl4030 for non-dt compile on x86 mfd: twl-core: Add IRQ_DOMAIN dependency devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc) irq_domain: Centralize definition of irq_dispose_mapping() irq_domain/mips: Allow irq_domain on MIPS irq_domain/x86: Convert x86 (embedded) to use common irq_domain ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c irq_domain/microblaze: Convert microblaze to use irq_domains irq_domain/powerpc: Replace custom xlate functions with library functions irq_domain/powerpc: constify irq_domain_ops irq_domain/c6x: Use library of xlate functions irq_domain/c6x: constify irq_domain structures irq_domain/c6x: Convert c6x to use generic irq_domain support. irq_domain: constify irq_domain_ops irq_domain: Create common xlate functions that device drivers can use irq_domain: Remove irq_domain_add_simple() irq_domain: Remove 'new' irq_domain in favour of the ppc one mfd: twl-core.c: Fix the number of interrupts managed by twl4030 of/address: add empty static inlines for !CONFIG_OF irq_domain: Add support for base irq and hwirq in legacy mappings ...
2012-03-21Merge tag 'pm-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates for 3.4 from Rafael Wysocki: "Assorted extensions and fixes including: * Introduction of early/late suspend/hibernation device callbacks. * Generic PM domains extensions and fixes. * devfreq updates from Axel Lin and MyungJoo Ham. * Device PM QoS updates. * Fixes of concurrency problems with wakeup sources. * System suspend and hibernation fixes." * tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits) PM / Domains: Check domain status during hibernation restore of devices PM / devfreq: add relation of recommended frequency. PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on() PM / shmobile: Make CMT driver use pm_genpd_dev_always_on() PM / shmobile: Make TMU driver use pm_genpd_dev_always_on() PM / Domains: Introduce "always on" device flag PM / Domains: Fix hibernation restore of devices, v2 PM / Domains: Fix handling of wakeup devices during system resume sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints PM / Sleep: JBD and JBD2 missing set_freezable() PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case PM / Freezer: Remove references to TIF_FREEZE in comments PM / Sleep: Add more wakeup source initialization routines PM / Hibernate: Enable usermodehelpers in hibernate() error path PM / Sleep: Make __pm_stay_awake() delete wakeup source timers PM / Sleep: Fix race conditions related to wakeup source timer function PM / Sleep: Fix possible infinite loop during wakeup source destruction PM / Hibernate: print physical addresses consistently with other parts of kernel ...
2012-03-21Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds
Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
2012-03-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
2012-03-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "It contains HID driver updates all over the place -- a lot of new hardware support especially in the multitouch area, including generic handling of all multitouch devices by the hid-multitiouch driver automatically." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits) HID: multitouch: add PID for Fructel product HID: wacom: Add reporting of wheel for Intuos4 WL HID: wacom: Replace __set_bit with input_set_capability HID: tivo: add support for BT-version (0x1200) HID: wacom: Reset stylus buttons - Intuos4 WL HID: multitouch: detect serial protocol HID: handle all multitouch devices through hid-multitouch HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T HID: make it possible to force hid-core claim the device HID: multitouch: add support for eGalax 0x722a HID: usbhid: add quirk no_get for quanta 3008 devices HID: multitouch: add more eGalax devices HID: multitouch: add new PID from Ideacom HID: multitouch: add support for Atmel maXTouch 03eb:2118 HID: waltop: Add support for tablet with PID 0038 HID: waltop: Replace original rdescs with links HID: uclogic: Replace original rdescs with links HID: wacom: Add pad buttons reporting on Intuos4 WL HID: wacom: report distance for Intuos4 WL HID: kye: Add support for 3 tablets ...
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20Merge branch 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This contains only one commit which cleans up UP allocation path a bit." * 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: use percpu allocator for cwq on UP
2012-03-20Merge branch 'for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup changes from Tejun Heo: "Out of the 8 commits, one fixes a long-standing locking issue around tasklist walking and others are cleanups." * 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list cgroup: Remove wrong comment on cgroup_enable_task_cg_list() cgroup: remove cgroup_subsys argument from callbacks cgroup: remove extra calls to find_existing_css_set cgroup: replace tasklist_lock with rcu_read_lock cgroup: simplify double-check locking in cgroup_attach_proc cgroup: move struct cgroup_pidlist out from the header file cgroup: remove cgroup_attach_task_current_cg()
2012-03-20exec: move de_thread()->setmax_mm_hiwater_rss() into exec_mmap()Oleg Nesterov
Minor cleanup. de_thread()->setmax_mm_hiwater_rss() looks a bit strange, move it into exec_mmap() which plays with old_mm. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20exit_signal: fix the "parent has changed security domain" logicOleg Nesterov
exit_notify() changes ->exit_signal if the parent already did exec. This doesn't really work, we are not going to send the signal now if there is another live thread or the exiting task is traced. The parent can exec before the last dies or the tracer detaches. Move this check into do_notify_parent() which actually sends the signal. The user-visible change is that we do not change ->exit_signal, and thus the exiting task is still "clone children" for do_wait()->eligible_child(__WCLONE). Hopefully this is fine, the current logic is racy anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20exit_signal: simplify the "we have changed execution domain" logicOleg Nesterov
exit_notify() checks "tsk->self_exec_id != tsk->parent_exec_id" to handle the "we have changed execution domain" case. We can change do_thread() to always set ->exit_signal = SIGCHLD and remove this check to simplify the code. We could change setup_new_exec() instead, this looks more logical because it increments ->self_exec_id. But note that de_thread() already resets ->exit_signal if it changes the leader, let's keep both changes close to each other. Note that we change ->exit_signal lockless, this changes the rules. Thereafter ->exit_signal is not stable under tasklist but this is fine, the only possible change is OLDSIG -> SIGCHLD. This can race with eligible_child() but the race is harmless. We can race with reparent_leader() which changes our ->exit_signal in parallel, but it does the same change to SIGCHLD. The noticeable user-visible change is that the execing task is not "visible" to do_wait()->eligible_child(__WCLONE) right after exec. To me this looks more logical, and this is consistent with mt case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20CLONE_PARENT shouldn't allow to set ->exit_signalOleg Nesterov
The child must not control its ->exit_signal, it is the parent who decides which signal the child should use for notification. This means that CLONE_PARENT should not use "clone_flags & CSIGNAL", the forking task is the sibling of the new process and their parent doesn't control exit_signal in this case. This patch uses ->exit_signal of the forking process, but perhaps we should simply use SIGCHLD. We read group_leader->exit_signal lockless, this can race with the ORIGINAL_SIGNAL -> SIGCHLD transition, but this is fine. Potentially this change allows to kill self_exec_id/parent_exec_id. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20Fix pppol2tp getsockname()Benjamin LaHaise
While testing L2TP functionality, I came across a bug in getsockname(). The IP address returned within the pppol2tp_addr's addr memember was not being set to the IP address in use. This bug is caused by using inet_sk() on the wrong socket (the L2TP socket rather than the underlying UDP socket), and was likely introduced during the addition of L2TPv3 support. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-20Remove printk from rds_sendmsgDave Jones
no socket layer outputs a message for this error and neither should rds. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-20Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds
Pull USB merge for 3.4-rc1 from Greg KH: "Here's the big USB merge for the 3.4-rc1 merge window. Lots of gadget driver reworks here, driver updates, xhci changes, some new drivers added, usb-serial core reworking to fix some bugs, and other various minor things. There are some patches touching arch code, but they have all been acked by the various arch maintainers." * tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits) net: qmi_wwan: add support for ZTE MF820D USB: option: add ZTE MF820D usb: gadget: f_fs: Remove lock is held before freeing checks USB: option: make interface blacklist work again usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls USB: use generic platform driver on ath79 USB: EHCI: Add a generic platform device driver USB: OHCI: Add a generic platform device driver USB: ftdi_sio: new PID: LUMEL PD12 USB: ftdi_sio: add support for FT-X series devices USB: serial: mos7840: Fixed MCS7820 device attach problem usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT. usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH USB: ohci-nxp: Remove i2c_write(), use smbus USB: ohci-nxp: Support for LPC32xx USB: ohci-nxp: Rename symbols from pnx4008 to nxp USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp usb: gadget: Kconfig: fix typo for 'different' usb: dwc3: pci: fix another failure path in dwc3_pci_probe() ...
2012-03-20Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...
2012-03-20Merge tag 'staging-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull big staging driver updates from Greg KH: "Here is the big drivers/staging/ merge for 3.4-rc1 Lots of new driver updates here, with the addition of a few new ones, and only one moving out of the staging tree to the "real" part of the kernel (the hyperv scsi driver, acked by the scsi maintainer). There are also loads of cleanups, fixes, and other minor things in here, all self-contained in the drivers/staging/ tree. Overall we reversed the recent trend by adding more lines than we removed: 379 files changed, 37952 insertions(+), 14153 deletions(-)" * tag 'staging-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (360 commits) staging/zmem: Use lockdep_assert_held instead of spin_is_locked Staging: rtl8187se: r8180_wx.c: Cleaned up comments Staging: rtl8187se: r8180_wx.c: Removed old comments Staging: rtl8187se: r8180_dm.c: Removed old comments Staging: android: ram_console.c: Staging: rtl8187se: r8180_dm.c: Fix comments Staging: rtl8187se: r8180_dm.c: Fix spacing issues Staging: rtl8187se: r8180_dm.c Fixed indentation issues Staging: rtl8187se: r8180_dm.c: Fix brackets Staging: rtl8187se: r8180_dm.c: Removed spaces before tab stop staging: vme: fix section mismatches in linux-next 20120314 Staging: rtl8187se: r8180_core.c: Fix some long line issues Staging: rtl8187se: r8180_core.c: Fix some spacing issues Staging: rtl8187se: r8180_core.c: Removed trailing spaces staging: mei: remove driver internal versioning Staging: rtl8187se: r8180_core.c: Cleaned up if statement staging: ozwpan depends on NET staging: ozwpan: added maintainer for ozwpan driver staging/mei: propagate error codes up in the write flow drivers:staging:mei Fix some typos in staging/mei ...
2012-03-20Merge tag 'driver-core-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches for 3.4-rc1 from Greg KH: "Here's the big driver core merge for 3.4-rc1. Lots of various things here, sysfs fixes/tweaks (with the nlink breakage reverted), dynamic debugging updates, w1 drivers, hyperv driver updates, and a variety of other bits and pieces, full information in the shortlog." * tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits) Tools: hv: Support enumeration from all the pools Tools: hv: Fully support the new KVP verbs in the user level daemon Drivers: hv: Support the newly introduced KVP messages in the driver Drivers: hv: Add new message types to enhance KVP regulator: Support driver probe deferral Revert "sysfs: Kill nlink counting." uevent: send events in correct order according to seqnum (v3) driver core: minor comment formatting cleanups driver core: move the deferred probe pointer into the private area drivercore: Add driver probe deferral mechanism DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers w1_bq27000: Only one thread can access the bq27000 at a time. w1_bq27000 - remove w1_bq27000_write w1_bq27000: remove unnecessary NULL test. sysfs: Fix memory leak in sysfs_sd_setsecdata(). intel_idle: Revert change of auto_demotion_disable_flags for Nehalem w1: Fix w1_bq27000 driver-core: documentation: fix up Greg's email address powernow-k6: Really enable auto-loading powernow-k7: Fix CPU family number ...
2012-03-20Merge tag 'char-misc-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char and misc patches for 3.4-rc1 from Greg KH: "Not much here, just a few minor fixes and some conversions to the module_*_driver() functions, making the codebase smaller." * tag 'char-misc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: bmp085: Use unsigned long to store jiffies char/ramoops: included linux/err.h twice misc: bmp085: Handle jiffies overflow correctly misc: fsa9480: Remove obsolete cleanup for clientdata char: Fix typo in tlclk.c char: Fix typo in viotape.c cs5535-mfgpt: don't call __init function from __devinit MISC: convert drivers/misc/* to use module_spi_driver() MISC: convert drivers/misc/* to use module_i2c_driver() MISC: convert drivers/misc/* to use module_platform_driver()
2012-03-20AFS: checking wrong bit in afs_readpages()Dan Carpenter
We should be testing "if (vnode->flags & (1 << 4))" instead of "if (vnode->flags & 4) {". The current test checks if the data was modified instead of deleted. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes for v3.4 from Ingo Molnar * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) ntp: Fix integer overflow when setting time math: Introduce div64_long cs5535-clockevt: Allow the MFGPT IRQ to be shared cs5535-clockevt: Don't ignore MFGPT on SMP-capable kernels x86/time: Eliminate unused irq0_irqs counter clocksource: scx200_hrt: Fix the build x86/tsc: Reduce the TSC sync check time for core-siblings timer: Fix bad idle check on irq entry nohz: Remove ts->Einidle checks before restarting the tick nohz: Remove update_ts_time_stat from tick_nohz_start_idle clockevents: Leave the broadcast device in shutdown mode when not needed clocksource: Load the ACPI PM clocksource asynchronously clocksource: scx200_hrt: Convert scx200 to use clocksource_register_hz clocksource: Get rid of clocksource_calc_mult_shift() clocksource: dbx500: convert to clocksource_register_hz() clocksource: scx200_hrt: use pr_<level> instead of printk time: Move common updates to a function time: Reorder so the hot data is together time: Remove most of xtime_lock usage in timekeeping.c ntp: Add ntp_lock to replace xtime_locking ...
2012-03-20Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes for v3.4 from Ingo Molnar * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) printk: Make it compile with !CONFIG_PRINTK sched/x86: Fix overflow in cyc2ns_offset sched: Fix nohz load accounting -- again! sched: Update yield() docs printk/sched: Introduce special printk_sched() for those awkward moments sched/nohz: Correctly initialize 'next_balance' in 'nohz' idle balancer sched: Cleanup cpu_active madness sched: Fix load-balance wreckage sched: Clean up parameter passing of proc_sched_autogroup_set_nice() sched: Ditch per cgroup task lists for load-balancing sched: Rename load-balancing fields sched: Move load-balancing arguments into helper struct sched/rt: Do not submit new work when PI-blocked sched/rt: Prevent idle task boosting sched/wait: Add __wake_up_all_locked() API sched/rt: Document scheduler related skip-resched-check sites sched/rt: Use schedule_preempt_disabled() sched/rt: Add schedule_preempt_disabled() sched/rt: Do not throttle when PI boosting sched/rt: Keep period timer ticking when rt throttling is active ...
2012-03-20Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events changes for v3.4 from Ingo Molnar: - New "hardware based branch profiling" feature both on the kernel and the tooling side, on CPUs that support it. (modern x86 Intel CPUs with the 'LBR' hardware feature currently.) This new feature is basically a sophisticated 'magnifying glass' for branch execution - something that is pretty difficult to extract from regular, function histogram centric profiles. The simplest mode is activated via 'perf record -b', and the result looks like this in perf report: $ perf record -b any_call,u -e cycles:u branchy $ perf report -b --sort=symbol 52.34% [.] main [.] f1 24.04% [.] f1 [.] f3 23.60% [.] f1 [.] f2 0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow 0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn 0.01% [k] _IO_vfprintf_internal [k] strchrnul 0.01% [k] __printf [k] _IO_vfprintf_internal 0.01% [k] main [k] __printf This output shows from/to branch columns and shows the highest percentage (from,to) jump combinations - i.e. the most likely taken branches in the system. "branches" can also include function calls and any other synchronous and asynchronous transitions of the instruction pointer that are not 'next instruction' - such as system calls, traps, interrupts, etc. This feature comes with (hopefully intuitive) flat ascii and TUI support in perf report. - Various 'perf annotate' visual improvements for us assembly junkies. It will now recognize function calls in the TUI and by hitting enter you can follow the call (recursively) and back, amongst other improvements. - Multiple threads/processes recording support in perf record, perf stat, perf top - which is activated via a comma-list of PIDs: perf top -p 21483,21485 perf stat -p 21483,21485 -ddd perf record -p 21483,21485 - Support for per UID views, via the --uid paramter to perf top, perf report, etc. For example 'perf top --uid mingo' will only show the tasks that I am running, excluding other users, root, etc. - Jump label restructurings and improvements - this includes the factoring out of the (hopefully much clearer) include/linux/static_key.h generic facility: struct static_key key = STATIC_KEY_INIT_FALSE; ... if (static_key_false(&key)) do unlikely code else do likely code ... static_key_slow_inc(); ... static_key_slow_inc(); ... The static_key_false() branch will be generated into the code with as little impact to the likely code path as possible. the static_key_slow_*() APIs flip the branch via live kernel code patching. This facility can now be used more widely within the kernel to micro-optimize hot branches whose likelihood matches the static-key usage and fast/slow cost patterns. - SW function tracer improvements: perf support and filtering support. - Various hardenings of the perf.data ABI, to make older perf.data's smoother on newer tool versions, to make new features integrate more smoothly, to support cross-endian recording/analyzing workflows better, etc. - Restructuring of the kprobes code, the splitting out of 'optprobes', and a corner case bugfix. - Allow the tracing of kernel console output (printk). - Improvements/fixes to user-space RDPMC support, allowing user-space self-profiling code to extract PMU counts without performing any system calls, while playing nice with the kernel side. - 'perf bench' improvements - ... and lots of internal restructurings, cleanups and fixes that made these features possible. And, as usual this list is incomplete as there were also lots of other improvements * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (120 commits) perf report: Fix annotate double quit issue in branch view mode perf report: Remove duplicate annotate choice in branch view mode perf/x86: Prettify pmu config literals perf report: Enable TUI in branch view mode perf report: Auto-detect branch stack sampling mode perf record: Add HEADER_BRANCH_STACK tag perf record: Provide default branch stack sampling mode option perf tools: Make perf able to read files from older ABIs perf tools: Fix ABI compatibility bug in print_event_desc() perf tools: Enable reading of perf.data files from different ABI rev perf: Add ABI reference sizes perf report: Add support for taken branch sampling perf record: Add support for sampling taken branch perf tools: Add code to support PERF_SAMPLE_BRANCH_STACK x86/kprobes: Split out optprobe related code to kprobes-opt.c x86/kprobes: Fix a bug which can modify kernel code permanently x86/kprobes: Fix instruction recovery on optimized path perf: Add callback to flush branch_stack on context switch perf: Disable PERF_SAMPLE_BRANCH_* when not supported perf/x86: Add LBR software filter support for Intel CPUs ...
2012-03-20Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq/core changes for v3.4 from Ingo Molnar * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove paranoid warnons and bogus fixups genirq: Flush the irq thread on synchronization genirq: Get rid of unnecessary IRQTF_DIED flag genirq: No need to check IRQTF_DIED before stopping a thread handler genirq: Get rid of unnecessary irqaction field in task_struct genirq: Fix incorrect check for forced IRQ thread handler softirq: Reduce invoke_softirq() code duplication genirq: Fix long-term regression in genirq irq_set_irq_type() handling x86-32/irq: Don't switch to irq stack for a user-mode irq
2012-03-20Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes for v3.4 from Ingo Molnar. The major features of this series are: - making RCU more aggressive about entering dyntick-idle mode in order to improve energy efficiency - converting a few more call_rcu()s to kfree_rcu()s - applying a number of rcutree fixes and cleanups to rcutiny - removing CONFIG_SMP #ifdefs from treercu - allowing RCU CPU stall times to be set via sysfs - adding CPU-stall capability to rcutorture - adding more RCU-abuse diagnostics - updating documentation - fixing yet more issues located by the still-ongoing top-to-bottom inspection of RCU, this time with a special focus on the CPU-hotplug code path. * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) rcu: Stop spurious warnings from synchronize_sched_expedited rcu: Hold off RCU_FAST_NO_HZ after timer posted rcu: Eliminate softirq-mediated RCU_FAST_NO_HZ idle-entry loop rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit() rcu: Remove redundant check for rcu_head misalignment PTR_ERR should be called before its argument is cleared. rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep rcu: Trace only after NULL-pointer check rcu: Call out dangers of expedited RCU primitives rcu: Rework detection of use of RCU by offline CPUs lockdep: Add CPU-idle/offline warning to lockdep-RCU splat rcu: No interrupt disabling for rcu_prepare_for_idle() rcu: Move synchronize_sched_expedited() to rcutree.c rcu: Check for illegal use of RCU from offlined CPUs rcu: Update stall-warning documentation rcu: Add CPU-stall capability to rcutorture rcu: Make documentation give more realistic rcutorture duration rcutorture: Permit holding off CPU-hotplug operations during boot rcu: Print scheduling-clock information on RCU CPU stall-warning messages ...
2012-03-20feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() ↵Cong Wang
for removal Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20highmem: kill all __kmap_atomic()Cong Wang
[swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20drbd: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20zcache: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20gma500: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20dm: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20tomoyo: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20sunrpc: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20rds: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20net: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20mm: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20lib: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20power: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20kdb: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20udf: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20ubifs: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20squashfs: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20reiserfs: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20ocfs2: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20ntfs: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20nilfs2: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20nfs: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20minix: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>