summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-06-17block: fix DISCARD_BARRIER requestsChristoph Hellwig
Filesystems assume that DISCARD_BARRIER are full barriers, so that they don't have to track in-progress discard operation when submitting new I/O. But currently we only treat them as elevator barriers, which don't actually do the nessecary queue drains. Also remove the unlikely around both the DISCARD and BARRIER requests - the happen far too often for a static mispredict. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-15cciss: set SCSI max cmd len to 16, as default is wrongStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-14cpqarray: fix two more wrong section typeJens Axboe
cpqarray_register_ctlr() and cpqarray_eisa_detect() also need to be marked as __devinit. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-14cpqarray: fix wrong __init type on pci probe functionJens Axboe
It needs to be __devinit, not __init. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-14Merge branch 'for-jens' of git://git.drbd.org/linux-2.6-drbd into for-linusJens Axboe
2010-06-14drbd: Fixed a race between disk-attach and unexpected state changesPhilipp Reisner
This was a very hard to trigger race condition. If we got a state packet from the peer, after drbd_nl_disk() has already changed the disk state to D_NEGOTIATING but after_state_ch() was not yet run by the worker, then receive_state() might called drbd_sync_handshake(), which in turn crashed when accessing p_uuid. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-06-11Linux 2.6.35-rc3v2.6.35-rc3Linus Torvalds
2010-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
2010-06-11Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11PCI: clear bridge resource range if BIOS assigned bad oneYinghai Lu
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: Yannick <yannick.roehlly@free.fr> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11PCI: hotplug/cpqphp, fix NULL dereferenceJiri Slaby
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"Jesse Barnes
This reverts commit 75568f8094eb0333e9c2109b23cbc8b82d318a3c. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11PCI: change resource collision messages from KERN_ERR to KERN_INFOBjorn Helgaas
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11Btrfs: The file argument for fsync() is never nullDan Carpenter
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea8085910e: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: handle ERR_PTR from posix_acl_from_xattr()Dan Carpenter
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: avoid BUG when dropping root and reference in same transactionSage Weil
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: prohibit a operation of changing acl's mask when noacl mount option usedShi Weihua
when used Posix File System Test Suite(pjd-fstest) to test btrfs, some cases about setfacl failed when noacl mount option used. I simplified used commands in pjd-fstest, and the following steps can reproduce it. ------------------------ # cd btrfs-part/ # mkdir aaa # setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest. ------------------------ I checked ext3, a warning message occured, like as: setfacl: aaa/: Operation not supported Certainly, it's expected by pjd-fstest. So, i compared acl.c of btrfs and ext3. Based on that, a patch created. Fortunately, it works. Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: should add a permission check for setfaclShi Weihua
On btrfs, do the following ------------------ # su user1 # cd btrfs-part/ # touch aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rw- group::rw- other::r-- # su user2 # cd btrfs-part/ # setfacl -m u::rwx aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rwx <- successed to setfacl group::rw- other::r-- ------------------ but we should prohibit it that user2 changing user1's acl. In fact, on ext3 and other fs, a message occurs: setfacl: aaa: Operation not permitted This patch fixed it. Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: btrfs_lookup_dir_item() can return ERR_PTRDan Carpenter
btrfs_lookup_dir_item() can return either ERR_PTRs or null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRsDan Carpenter
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a check for that. It's not clear to me if it can also return NULL pointers or not so I left the original NULL pointer check as is. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: unwind after btrfs_start_transaction() errorsDan Carpenter
This was added by a22285a6a3: "Btrfs: Integrate metadata reservation with start_transaction". If we goto out here then we skip all the unwinding and there are locks still held etc. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: btrfs_iget() returns ERR_PTRDan Carpenter
btrfs_iget() returns an ERR_PTR() on failure and not null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: handle kzalloc() failure in open_ctree()Dan Carpenter
Unwind and return -ENOMEM if the allocation fails here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: handle error returns from btrfs_lookup_dir_item()Dan Carpenter
If btrfs_lookup_dir_item() fails, we should can just let the mount fail with an error. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: Fix BUG_ON for fs converted from extNYan, Zheng
Tree blocks can live in data block groups in FS converted from extN. So it's easy to trigger the BUG_ON. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: Fix null dereference in relocation.cYan, Zheng
Fix a potential null dereference in relocation.c Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Merge branch 'wimax-2.6.35.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2010-06-11wimax/i2400m: fix missing endian correction read in fw loaderInaky Perez-Gonzalez
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2010-06-11Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Create output directory in Makefile.modbuiltin kbuild: Generate modules.builtin in make modules
2010-06-11Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid validate_cis failure on CIS override pcmcia: dev_node removal bugfix pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: try to send partial cap release on cap message on missing inode ceph: release cap on import if we don't have the inode ceph: fix misleading/incorrect debug message ceph: fix atomic64_t initialization on ia64 ceph: fix lease revocation when seq doesn't match ceph: fix f_namelen reported by statfs ceph: fix memory leak in statfs ceph: fix d_subdirs ordering problem
2010-06-11Btrfs: fix remap_file_pages errorMiao Xie
when we use remap_file_pages() to remap a file, remap_file_pages always return error. It is because btrfs didn't set VM_CAN_NONLINEAR for vma. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: uninitialized data is check_path_shared()Dan Carpenter
refs can be used with uninitialized data if btrfs_lookup_extent_info() fails on the first pass through the loop. In the original code if that happens then check_path_shared() probably returns 1, this patch changes it to return 1 for safety. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: fix fallocate regressionJosef Bacik
Seems that when btrfs_fallocate was converted to use the new ENOSPC stuff we dropped passing the mode to the function that actually does the preallocation. This breaks anybody who wants to use FALLOC_FL_KEEP_SIZE. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11Btrfs: fix loop device on top of btrfsMiao Xie
We cannot use the loop device which has been connected to a file in the btrf The reproduce steps is following: # dd if=/dev/zero of=vdev0 bs=1M count=1024 # losetup /dev/loop0 vdev0 # mkfs.btrfs /dev/loop0 ... failed to zero device start -5 The reason is that the btrfs don't implement either ->write_begin or ->write the VFS API, so we fix it by setting ->write to do_sync_write(). Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-06-11writeback: fix pin_sb_for_writebackChristoph Hellwig
We need to check for s_instances to make sure we don't bother working against a filesystem that is beeing unmounted, and we need to call put_super to make sure a superblock is freed when we race against umount. Also no need to keep sb_lock after we got a reference on it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: add missing requeue_io in writeback_inodes_wbChristoph Hellwig
In "writeback: fix writeback_inodes_wb from writeback_inodes_sb" I accidentally removed the requeue_io if we need to skip a superblock because we can't pin it. Add it back, otherwise we're getting spurious lockups after multiple xfstests runs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: simplify and split bdi_start_writebackChristoph Hellwig
bdi_start_writeback now never gets a superblock passed, so we can just remove that case. And to further untangle the code and flatten the call stack split it into two trivial helpers for it's two callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: simplify wakeup_flusher_threadsChristoph Hellwig
bdi_writeback_all only has one caller, so fold it to simplify the code and flatten the call stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: fix writeback_inodes_wb from writeback_inodes_sbChristoph Hellwig
When we call writeback_inodes_wb from writeback_inodes_sb we always have s_umount held, which currently makes the whole operation a no-op. But if we are called to write out inodes for a specific superblock we always have s_umount held, so replace the incorrect logic checking for WB_SYNC_ALL which only worked by coincidence with the proper check for an explicit superblock argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: enforce s_umount locking in writeback_inodes_sbChristoph Hellwig
Make sure that not only sync_filesystem but all callers of writeback_inodes_sb have the superblock protected against remount. As-is this disables all functionality for these callers, but the next patch relies on this locking to fix writeback_inodes_sb for sync_filesystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: queue work on stack in writeback_inodes_sbChristoph Hellwig
If we want to rely on s_umount in the caller we need to wait for completion of the I/O submission before returning to the caller. Refactor bdi_sync_writeback into a bdi_queue_work_onstack helper and use it for this case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11writeback: fix writeback completion notificationsChristoph Hellwig
The code dealing with bdi_work->state and completion of a bdi_work is a major mess currently. This patch makes sure we directly use one set of flags to deal with it, and use it consistently, which means: - always notify about completion from the rcu callback. We only ever wait for it from on-stack callers, so this simplification does not even cause a theoretical slowdown currently. It also makes sure we don't miss out on the notification if we ever add other callers to wait for it. - make earlier completion notification depending on the on-stack allocation, not the sync mode. If we introduce new callers that want to do WB_SYNC_NONE writeback from on-stack callers this will be nessecary. Also rename bdi_wait_on_work_clear to bdi_wait_on_work_done and inline a few small functions into their only caller to make the code understandable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-10net8139: fix a race at the end of NAPIFigo.zhang
fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10pktgen: Fix accuracy of inter-packet delay.Daniel Turull
This patch correct a bug in the delay of pktgen. It makes sure the inter-packet interval is accurate. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10pkt_sched: gen_estimator: add a new lockEric Dumazet
gen_kill_estimator() / gen_new_estimator() is not always called with RTNL held. net/netfilter/xt_RATEEST.c is one user of these API that do not hold RTNL, so random corruptions can occur between "tc" and "iptables". Add a new fine grained lock instead of trying to use RTNL in netfilter. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10net: deliver skbs on inactive slaves to exact matchesJohn Fastabend
Currently, the accelerated receive path for VLAN's will drop packets if the real device is an inactive slave and is not one of the special pkts tested for in skb_bond_should_drop(). This behavior is different then the non-accelerated path and for pkts over a bonded vlan. For example, vlanx -> bond0 -> ethx will be dropped in the vlan path and not delivered to any packet handlers at all. However, bond0 -> vlanx -> ethx and bond0 -> ethx will be delivered to handlers that match the exact dev, because the VLAN path checks the real_dev which is not a slave and netif_recv_skb() doesn't drop frames but only delivers them to exact matches. This patch adds a sk_buff flag which is used for tagging skbs that would previously been dropped and allows the skb to continue to skb_netif_recv(). Here we add logic to check for the deliver_no_wcard flag and if it is set only deliver to handlers that match exactly. This makes both paths above consistent and gives pkt handlers a way to identify skbs that come from inactive slaves. Without this patch in some configurations skbs will be delivered to handlers with exact matches and in others be dropped out right in the vlan path. I have tested the following 4 configurations in failover modes and load balancing modes. # bond0 -> ethx # vlanx -> bond0 -> ethx # bond0 -> vlanx -> ethx # bond0 -> ethx | vlanx -> -- Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10ceph: try to send partial cap release on cap message on missing inodeSage Weil
If we have enough memory to allocate a new cap release message, do so, so that we can send a partial release message immediately. This keeps us from making the MDS wait when the cap release it needs is in a partially full release message. If we fail because of ENOMEM, oh well, they'll just have to wait a bit longer. Signed-off-by: Sage Weil <sage@newdream.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 22:31:10 +0000