summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-06-16netfilter: nft_nat: don't dump port information if unsetPablo Neira Ayuso
Don't include port information attributes if they are unset. Reported-by: Ana Rey <anarey@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: nf_tables: indicate family when dumping set elementsPablo Neira Ayuso
Set the nfnetlink header that indicates the family of this element. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: nft_compat: call {target, match}->destroy() to cleanup entryPablo Neira Ayuso
Otherwise, the reference to external objects (eg. modules) are not released when the rules are removed. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: nf_tables: fix wrong type in transaction when replacing rulesPablo Neira Ayuso
In b380e5c ("netfilter: nf_tables: add message type to transactions"), I used the wrong message type in the rule replacement case. The rule that is replaced needs to be handled as a deleted rule. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: nf_tables: decrement chain use counter when replacing rulesPablo Neira Ayuso
Thus, the chain use counter remains with the same value after the rule replacement. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: nf_tables: use u32 for chain use counterPablo Neira Ayuso
Since 4fefee5 ("netfilter: nf_tables: allow to delete several objects from a batch"), every new rule bumps the chain use counter. However, this is limited to 16 bits, which means that it will overrun after 2^16 rules. Use a u32 chain counter and check for overflows (just like we do for table objects). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: nf_tables: use RCU-safe list insertion when replacing rulesPablo Neira Ayuso
The patch 5e94846 ("netfilter: nf_tables: add insert operation") did not include RCU-safe list insertion when replacing rules. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: ctnetlink: fix refcnt leak in dying/unconfirmed list dumperFlorian Westphal
'last' keeps track of the ct that had its refcnt bumped during previous dump cycle. Thus it must not be overwritten until end-of-function. Another (unrelated, theoretical) issue: Don't attempt to bump refcnt of a conntrack whose reference count is already 0. Such conntrack is being destroyed right now, its memory is freed once we release the percpu dying spinlock. Fixes: b7779d06 ('netfilter: conntrack: spinlock per cpu to protect special lists.') Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16netfilter: ctnetlink: fix dumping of dying/unconfirmed conntracksPablo Neira Ayuso
The dumping prematurely stops, it seems the callback argument that indicates that all entries have been dumped is set after iterating on the first cpu list. The dumping also may stop before the entire per-cpu list content is also dumped. With this patch, conntrack -L dying now shows the dying list content again. Fixes: b7779d06 ("netfilter: conntrack: spinlock per cpu to protect special lists.") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-06-16ARM: shmobile: Add DT and defconfigs to MAINTAINERSSimon Horman
There are a number of DT and defconfig files which are maintained as part of shmobile but have not been listed as such in the MAINTAINERS file. This creates confusion from time to time. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-16Revert "offb: Add palette hack for little endian"Benjamin Herrenschmidt
This reverts commit e1edf18b20076da83dd231dbd2146cbbc31c0b14. This patch was a misguided attempt at fixing offb for LE ppc64 kernels on BE qemu but is just wrong ... it breaks real LE/LE setups, LE with real HW, and existing mixed endian systems that did the fight thing with the appropriate device-tree property. Bad reviewing on my part, sorry. The right fix is to either make qemu change its endian when the guest changes endian (working on that) or to use the existing foreign endian support. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13+] ---
2014-06-16drm/i915, HD-audio: Don't continue probing when nomodeset is givenTakashi Iwai
When a machine is booted with nomodeset option, i915 driver skips the whole initialization. Meanwhile, HD-audio tries to bind wth i915 just by request_symbol() without knowing that the initialization was skipped, and eventually it hits WARN_ON() in i915_request_power_well() and i915_release_power_well() wrongly but still continues probing, even though it doesn't work at all. In this patch, both functions are changed to return an error in case of uninitialized state instead of WARN_ON(), so that HD-audio driver can give up HDMI controller initialization at the right time. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> [3.15] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-16s390/ccwgroup: use ccwgroup_ungroup wrapperSebastian Ott
To ungroup and deregister the group device always use the ccwgroup_ungroup wrapper. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: fix an uninitialized return codeSebastian Ott
Since commit 0b60f9ead5d4816e7e3d6e28f4a0d22d4a1b2513 "s390: use device_remove_file_self() instead of device_schedule_callback()" the return code of ccwgroup_ungroup_store is uninitialized. Make sure the rc is always initialized. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: obtain extra reference for asynchronous processingSebastian Ott
Commit 0b60f9ead5d4816e7e3d6e28f4a0d22d4a1b2513 "s390: use device_remove_file_self() instead of device_schedule_callback()" changed ccwgroup to use an extra work queue instead of device_schedule_callback. This function obtained an extra device reference for its async work which is missing in the new implementation and results in a "freeing memory with a lock still held" BUG. Fix this by obtaining an extra reference for the async work. Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16qdio: Keep device-specific dbf entriesStefan Raspl
Keep the per-device dbf entries until module is removed, with proper error checking for debug feature setup. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/compat: correct ucontext layout for high gprsMartin Schwidefsky
The uc_sigmask definition in the kernel differs from the one in the glibc, the kernel uc_sigmask has 64 bits while the glibc verison is 1024 bits. The extension of the ucontext structure for 64-bit register support for 31-bit compat processes added a new field uc_gprs_high which starts 8 bytes after the uc_sigmask field. As the glibc view of the ucontext assumes a size of 128 bytes for uc_sigmask add a 120 byte padding to the kernel structure ucontext_extended after the 8 byte uc_sigmask. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/cio: set device name as early as possibleSebastian Ott
Currently we set the device name at the time we call device_add after we receive the interrupt for the first I/O. When something is not working as expected during that first I/O (e.g. we don't receive an interrupt) we print a message including the device name which has not yet been initialized. Set the device name after calling device_initialize (prior to starting the first I/O) so that we have the name present if some unexpected error occurs during that first I/O. Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reported-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16Merge tag 'for-v3.16-rc/omap-fixes-a' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.16/fixes Two OMAP hwmod patches for early v3.16-rc kernels. There's one OMAP SoC integration fix for the AM43xx SoC, without which, IP blocks can't be placed into hard-reset. There is also one OMAP5 SoC data addition patch that should have gone in for v3.16. Normally I wouldn't send this as part of an -rc series, since it's not technically a fix. But I'd like to make an exception in this case because: - it's intended to go in very early in the v3.16-rc series (or even pre-rc1); - it's a fairly small change; - the impact is limited to a single SoC and a single device; - the only reason that it didn't go in earlier is because it "slipped through the cracks," rather than for any technical reason. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/hwmod-a-v3.16-rc/20140615201307/
2014-06-16ARM: dts: Enable twl4030 off-idle configuration for selected omapsTony Lindgren
N900 now seems to shut down the external oscillator when hitting off-idle. And Beagle XM seems to have OSC_EN pin connected to allow shutting down the oscillator looking at the schematics. The oscillator output is cut off in off-idle and you can monitor it from R56 on the bottom side of the board near the power jack. Note that for beagle we need to also enable the UART wake-up event, the others have that enabled in earlier patches. OMAP37XX EVM (TMDSEVM3730) does not seem to have twl4030 clken pin connected, so there is no point trying to enable shutting down of the oscillator on it for the extra latency it adds. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-06-16rtmutex: Plug slow unlock raceThomas Gleixner
When the rtmutex fast path is enabled the slow unlock function can create the following situation: spin_lock(foo->m->wait_lock); foo->m->owner = NULL; rt_mutex_lock(foo->m); <-- fast path free = atomic_dec_and_test(foo->refcnt); rt_mutex_unlock(foo->m); <-- fast path if (free) kfree(foo); spin_unlock(foo->m->wait_lock); <--- Use after free. Plug the race by changing the slow unlock to the following scheme: while (!rt_mutex_has_waiters(m)) { /* Clear the waiters bit in m->owner */ clear_rt_mutex_waiters(m); owner = rt_mutex_owner(m); spin_unlock(m->wait_lock); if (cmpxchg(m->owner, owner, 0) == owner) return; spin_lock(m->wait_lock); } So in case of a new waiter incoming while the owner tries the slow path unlock we have two situations: unlock(wait_lock); lock(wait_lock); cmpxchg(p, owner, 0) == owner mark_rt_mutex_waiters(lock); acquire(lock); Or: unlock(wait_lock); lock(wait_lock); mark_rt_mutex_waiters(lock); cmpxchg(p, owner, 0) != owner enqueue_waiter(); unlock(wait_lock); lock(wait_lock); wakeup_next waiter(); unlock(wait_lock); lock(wait_lock); acquire(lock); If the fast path is disabled, then the simple m->owner = NULL; unlock(m->wait_lock); is sufficient as all access to m->owner is serialized via m->wait_lock; Also document and clarify the wakeup_next_waiter function as suggested by Oleg Nesterov. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140611183852.937945560@linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-16ARC: remove checks for CONFIG_ARC_MMU_V4Paul Bolle
There's no Kconfig symbol ARC_MMU_V4 so the checks for CONFIG_ARC_MMU_V4 will always evaluate to false. Remove them. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-15ext4: Fix buffer double free in ext4_alloc_branch()Jan Kara
Error recovery in ext4_alloc_branch() calls ext4_forget() even for buffer corresponding to indirect block it did not allocate. This leads to brelse() being called twice for that buffer (once from ext4_forget() and once from cleanup in ext4_ind_map_blocks()) leading to buffer use count misaccounting. Eventually (but often much later because there are other users of the buffer) we will see messages like: VFS: brelse: Trying to free free buffer Another manifestation of this problem is an error: JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh); inconsistent data on disk The fix is easy - don't forget buffer we did not allocate. Also add an explanatory comment because the indexing at ext4_alloc_branch() is somewhat subtle. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-06-15Linux 3.16-rc1v3.16-rc1Linus Torvalds
2014-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix checksumming regressions, from Tom Herbert. 2) Undo unintentional permissions changes for SCTP rto_alpha and rto_beta sysfs knobs, from Denial Borkmann. 3) VXLAN, like other IP tunnels, should advertize it's encapsulation size using dev->needed_headroom instead of dev->hard_header_len. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: sctp: fix permissions for rto_alpha and rto_beta knobs vxlan: Checksum fixes net: add skb_pop_rcv_encapsulation udp: call __skb_checksum_complete when doing full checksum net: Fix save software checksum complete net: Fix GSO constants to match NETIF flags udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup vxlan: use dev->needed_headroom instead of dev->hard_header_len MAINTAINERS: update cxgb4 maintainer
2014-06-15ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmodsKeshava Munegowda
Create hwmods for ocp2scp3 and sata modules. [Roger Q] Clean up. CC: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-06-15Merge tag 'clk-for-linus-3.16-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
2014-06-15Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds
Pull NVMe update from Matthew Wilcox: "Mostly bugfixes again for the NVMe driver. I'd like to call out the exported tracepoint in the block layer; I believe Keith has cleared this with Jens. We've had a few reports from people who're really pounding on NVMe devices at scale, hence the timeout changes (and new module parameters), hotplug cpu deadlock, tracepoints, and minor performance tweaks" [ Jens hadn't seen that tracepoint thing, but is ok with it - it will end up going away when mq conversion happens ] * git://git.infradead.org/users/willy/linux-nvme: (22 commits) NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. NVMe: Use Log Page constants in SCSI emulation NVMe: Define Log Page constants NVMe: Fix hot cpu notification dead lock NVMe: Rename io_timeout to nvme_io_timeout NVMe: Use last bytes of f/w rev SCSI Inquiry NVMe: Adhere to request queue block accounting enable/disable NVMe: Fix nvme get/put queue semantics NVMe: Delete NVME_GET_FEAT_TEMP_THRESH NVMe: Make admin timeout a module parameter NVMe: Make iod bio timeout a parameter NVMe: Prevent possible NULL pointer dereference NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD) NVMe: Update data structures for NVMe 1.2 NVMe: Enable BUILD_BUG_ON checks NVMe: Update namespace and controller identify structures to the 1.1a spec NVMe: Flush with data support NVMe: Configure support for block flush NVMe: Add tracepoints NVMe: Protect against badly formatted CQEs ...
2014-06-15random: fix nasty entropy accounting bugTheodore Ts'o
Commit 0fb7a01af5b0 "random: simplify accounting code", introduced in v3.15, has a very nasty accounting problem when the entropy pool has has fewer bytes of entropy than the number of requested reserved bytes. In that case, "have_bytes - reserved" goes negative, and since size_t is unsigned, the expression: ibytes = min_t(size_t, ibytes, have_bytes - reserved); ... does not do the right thing. This is rather bad, because it defeats the catastrophic reseeding feature in the xfer_secondary_pool() path. It also can cause the "BUG: spinlock trylock failure on UP" for some kernel configurations when prandom_reseed() calls get_random_bytes() in the early init, since when the entropy count gets corrupted, credit_entropy_bits() erroneously believes that the nonblocking pool has been fully initialized (when in fact it is not), and so it calls prandom_reseed(true) recursively leading to the spinlock BUG. The logic is *not* the same it was originally, but in the cases where it matters, the behavior is the same, and the resulting code is hopefully easier to read and understand. Fixes: 0fb7a01af5b0 "random: simplify accounting code" Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Greg Price <price@mit.edu> Cc: stable@vger.kernel.org #v3.15
2014-06-15ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XXDave Gerlach
am43xx reset register layout is more similar to am33xx than omap4 so use the am33xx functions for hwmod hardreset soc_ops rather than the currently used omap4 functions. Without this, assert_hardreset and deassert_hardreset will not work on am43xx. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [paul@pwsan.com: fixed build errors for an AM43xx-only Kconfig] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-06-15net: sctp: fix permissions for rto_alpha and rto_beta knobsDaniel Borkmann
Commit 3fd091e73b81 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e73b81 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15Merge branch 'csum_fixes'David S. Miller
Tom Herbert says: ==================== Fixes related to some recent checksum modifications. - Fix GSO constants to match NETIF flags - Fix logic in saving checksum complete in __skb_checksum_complete - Call __skb_checksum_complete from UDP if we are checksumming over whole packet in order to save checksum. - Fixes to VXLAN to work correctly with checksum complete ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15vxlan: Checksum fixesTom Herbert
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15net: add skb_pop_rcv_encapsulationTom Herbert
This function is used by UDP encapsulation protocols in RX when crossing encapsulation boundary. If ip_summed is set to CHECKSUM_UNNECESSARY and encapsulation is not set, change to CHECKSUM_NONE since the checksum has not been validated within the encapsulation. Clears csum_valid by the same rationale. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15udp: call __skb_checksum_complete when doing full checksumTom Herbert
In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15net: Fix save software checksum completeTom Herbert
Geert reported issues regarding checksum complete and UDP. The logic introduced in commit 7e3cead5172927732f51fde ("net: Save software checksum complete") is not correct. This patch: 1) Restores code in __skb_checksum_complete_header except for setting CHECKSUM_UNNECESSARY. This function may be calculating checksum on something less than skb->len. 2) Adds saving checksum to __skb_checksum_complete. The full packet checksum 0..skb->len is calculated without adding in pseudo header. This value is saved in skb->csum and then the pseudo header is added to that to derive the checksum for validation. 3) In both __skb_checksum_complete_header and __skb_checksum_complete, set skb->csum_valid to whether checksum of zero was computed. This allows skb_csum_unnecessary to return true without changing to CHECKSUM_UNNECESSARY which was done previously. 4) Copy new csum related bits in __copy_skb_header. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-15net: Fix GSO constants to match NETIF flagsTom Herbert
Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-14Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "This is just a couple of drivers (hpsa and lpfc) that got left out for further testing in linux-next. We also have one fix to a prior submission (qla2xxx sparse)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch lpfc: Update lpfc version to driver version 10.2.8001.0 lpfc: Fix ExpressLane priority setup lpfc: mark old devices as obsolete lpfc: Fix for initializing RRQ bitmap lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries lpfc: Update lpfc version to driver version 10.2.8000.0 lpfc: Update Copyright on changed files from 8.3.45 patches lpfc: Update Copyright on changed files lpfc: Fixed locking for scsi task management commands lpfc: Convert runtime references to old xlane cfg param to fof cfg param lpfc: Fix FW dump using sysfs lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock lpfc: Fixed kernel panic in lpfc_abort_handler lpfc: Fix locking for postbufq when freeing lpfc: Fix locking for lpfc_hba_down_post lpfc: Fix dynamic transitions of FirstBurst from on to off hpsa: fix handling of hpsa_volume_offline return value hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id hpsa: remove messages about volume status VPD inquiry page not supported ...
2014-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull more btrfs updates from Chris Mason: "This has a few fixes since our last pull and a new ioctl for doing btree searches from userland. It's very similar to the existing ioctl, but lets us return larger items back down to the app" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix error handling in create_pending_snapshot btrfs: fix use of uninit "ret" in end_extent_writepage() btrfs: free ulist in qgroup_shared_accounting() error path Btrfs: fix qgroups sanity test crash or hang btrfs: prevent RCU warning when dereferencing radix tree slot Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting btrfs: new ioctl TREE_SEARCH_V2 btrfs: tree_search, search_ioctl: direct copy to userspace btrfs: new function read_extent_buffer_to_user btrfs: tree_search, copy_to_sk: return needed size on EOVERFLOW btrfs: tree_search, copy_to_sk: return EOVERFLOW for too small buffer btrfs: tree_search, search_ioctl: accept varying buffer btrfs: tree_search: eliminate redundant nr_items check
2014-06-14Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds
Pull aio fix and cleanups from Ben LaHaise: "This consists of a couple of code cleanups plus a minor bug fix" * git://git.kvack.org/~bcrl/aio-next: aio: cleanup: flatten kill_ioctx() aio: report error from io_destroy() when threads race in io_destroy() fs/aio.c: Remove ctx parameter in kiocb_cancel
2014-06-14fix __swap_writepage() compile failure on old gcc versionsAl Viro
Tetsuo Handa wrote: "Commit 62a8067a7f35 ("bio_vec-backed iov_iter") introduced an unnamed union inside a struct which gcc-4.4.7 cannot handle. Name the unnamed union as u in order to fix build failure" Let's do this instead: there is only one place in the entire tree that steps into this breakage. Anon structs and unions work in older gcc versions; as the matter of fact, we have those in the tree - see e.g. struct ieee80211_tx_info in include/net/mac80211.h What doesn't work is handling their initializers: struct { int a; union { int b; char c; }; } x[2] = {{.a = 1, .c = 'a'}, {.a = 0, .b = 1}}; is the obvious syntax for initializer, perfectly fine for C11 and handled correctly by gcc-4.7 or later. Earlier versions, though, break on it - declaration is fine and so's access to fields (i.e. x[0].c = 'a'; would produce the right code), but members of the anon structs and unions are not inserted into the right namespace. Tellingly, those older versions will not barf on struct {int a; struct {int a;};}; - looks like they just have it hacked up somewhere around the handling of . and -> instead of doing the right thing. The easiest way to deal with that crap is to turn initialization of those fields (in the only place where we have such initializer of iov_iter) into plain assignment. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-14Merge tag 'hsi-for-3.16-fixes1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI build fixes from Sebastian Reichel: - tighten dependency between ssi-protocol and omap-ssi to fix build failures with randconfig. - use normal module refcounting in omap driver to fix build with disabled module support * tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: omap_ssi_port: use normal module refcounting HSI: fix omap ssi driver dependency
2014-06-14Merge tag 'gpio-v3.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "A first GPIO fix for the v3.16 series, this was serious since it blocks the OMAP boot. Sending you this vital fix before leaving for a short vacation so it does not sit collecting dust in my tree for no good reason. Apart from this, our v3.16 cycle looks like a good start" * tag 'gpio-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: of: Fix handling for deferred probe for -gpio suffix
2014-06-14Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso fixes from Peter Anvin: "Fixes for x86/vdso. One is a simple build fix for bigendian hosts, one is to make "make vdso_install" work again, and the rest is about working around a bug in Google's Go language -- two are documentation patches that improves the sample code that the Go coders took, modified, and broke; the other two implements a workaround that keeps existing Go binaries from segfaulting at least" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso_install x86/vdso: Hack to keep 64-bit Go programs working x86/vdso: Add PUT_LE to store little-endian values x86/vdso/doc: Make vDSO examples more portable x86/vdso/doc: Rename vdso_test.c to vdso_standalone_test_x86.c x86, vdso: Remove one final use of htole16()
2014-06-14Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for Sensirion SHTC1 humidity / temperature sensor - convert ltc4151 and vexpress drivers to use devm functions - drop generic chip detection from lm85 driver - avoid forward declarations in atxp1 driver - fix sign extensions in ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: vexpress: Use devm helper for hwmon device registration hwmon: (atxp1) Avoid forward declaration hwmon: add support for Sensirion SHTC1 sensor hwmon: (ltc4151) Convert to devm_hwmon_device_register_with_groups hwmon: (lm85) Drop generic detection hwmon: (ina2xx) Cast to s16 on shunt and current regs
2014-06-14iio: adc: checking for NULL instead of IS_ERR() in probeDan Carpenter
mcb_request_mem() returns an ERR_PTR(), it doesn't return NULL. Fixes: 74aeac4da66f ('iio: adc: Add MEN 16z188 ADC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-06-14iio: adc: at91: signedness bug in at91_adc_get_trigger_value_by_name()Dan Carpenter
at91_adc_get_trigger_value_by_name() was returning -ENOMEM truncated to a positive u8 and that doesn't work. I've changed it to int and refactored it to preserve the error code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-06-14iio: mxs-lradc: fix dividerRobert Hodaszi
All channels' single measurement are happening on CH 0. So enabling / disabling the divider once is not enough, because it has impact on all channels. Set only a flag, then check this on each measurement, and enable / disable the divider as required. Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Cc: Stable@vger.kernel.org Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14Merge branch 'perf/core' into perf/urgent, to pick up the latest fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-14x86/kprobes: Fix build errors and blacklist context_track_userMasami Hiramatsu
This essentially reverts commit: ecd50f714c42 ("kprobes, x86: Call exception_enter after kprobes handled") since it causes build errors with CONFIG_CONTEXT_TRACKING and that has been made from misunderstandings; context_track_user_*() don't involve much in interrupt context, it just returns if in_interrupt() is true. Instead of changing the do_debug/int3(), this just adds context_track_user_*() to kprobes blacklist, since those are still can be called right before kprobes handles int3 and debug exceptions, and probing those will cause an infinite loop. Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Borislav Petkov <bp@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20140614064711.7865.45957.stgit@kbuild-fedora.novalocal Signed-off-by: Ingo Molnar <mingo@kernel.org>