summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-07-06packet: Fix leak in pre-defrag support.David S. Miller
When we clone the SKB, we forget about the original one. Avoid this problem by using skb_share_check(). Reported-by: Penttilä Mika <mika.penttila@ixonos.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06net: sched: constify tcf_proto and tc_actionEric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06packet: Add 'cpu' fanout policy.David S. Miller
Unfortunately we have to use a real modulus here as the multiply trick won't work as effectively with cpu numbers as it does with rxhash values. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06veth: Kill unused tx_droppedEric Dumazet
Followup to commit f82528bc13a (Exclude duplicated checking for iface-up) : We no longer need percpu tx_dropped field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05veth: Kill unused code label and code block.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05dcbnl: Add CEE notificationShmulik Ravid
This patch add an unsolicited notification of the DCBX negotiated parameters for the CEE flavor of the DCBX protocol. The notification message is identical to the aggregated CEE get operation and holds all the pertinent local and peer information. The notification routine is exported so it can be invoked by drivers supporting an embedded DCBX stack. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05dcbnl: Aggregated CEE GET operationShmulik Ravid
The following couple of patches add dcbnl an unsolicited notification of the the DCB configuration for the CEE flavor of the DCBX protocol. This is useful when the user-mode DCB client is not responsible for conducting and resolving the DCBX negotiation (either because the DCBX stack is embedded in the HW or the negotiation is handled by another agent in the host), but still needs to get the negotiated parameters. This functionality already exists for the IEEE flavor of the DCBX protocol and these patches add it to the older CEE flavor. The first patch extends the CEE attribute GET operation to include not only the peer information, but also all the pertinent local configuration (negotiated parameters). The second patch adds and export a CEE specific notification routine. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-05b44: Use pr_<level>_once and DRV_DESCRIPTIONJoe Perches
Convert a printk with a static to pr_<level>_once Add and use DRV_DESCRIPTION to reduce string duplication. Remove now unused version. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: Add GSO to vlan_features initializationShan Wei
Just add GSO to vlan_features initialization, and update comments. When we set offload features, vlan_dev_fix_features() will do more check. In vlan_dev_fix_features(), final features is decided by features of real device and vlan_features of real device. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05packet: Add pre-defragmentation support for ipv4 fanouts.David S. Miller
The skb->rxhash cannot be properly computed if the packet is a fragment. To alleviate this, allow the AF_PACKET client to ask for defragmentation to be done at demux time. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05ipv4: Add ip_defrag() agent IP_DEFRAG_AF_PACKET.David S. Miller
Elide the ICMP on frag queue timeouts unconditionally for this user. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05packet: Add fanout support.David S. Miller
Fanouts allow packet capturing to be demuxed to a set of AF_PACKET sockets. Two fanout policies are implemented: 1) Hashing based upon skb->rxhash 2) Pure round-robin An AF_PACKET socket must be fully bound before it tries to add itself to a fanout. All AF_PACKET sockets trying to join the same fanout must all have the same bind settings. Fanouts are identified (within a network namespace) by a 16-bit ID. The first socket to try to add itself to a fanout with a particular ID, creates that fanout. When the last socket leaves the fanout (which happens only when the socket is closed), that fanout is destroyed. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05packet: Add helpers to register/unregister ->prot_hookDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: vlan: enable soft features regardless of underlying deviceShan Wei
If gso/gro feature of underlying device is turned off, then new created vlan device never can turn gso/gro on. Although underlying device don't support TSO, we still should use software segments for vlan device. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-mergeDavid S. Miller
2011-07-05vmxnet3: fix starving rx ring whenoc_skb kb failsShreyas Bhatewara
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bridge: Always flood broadcast packetsHerbert Xu
As is_multicast_ether_addr returns true on broadcast packets as well, we need to explicitly exclude broadcast packets so that they're always flooded. This wasn't an issue before as broadcast packets were considered to be an unregistered multicast group, which were always flooded. However, as we now only flood such packets to router ports, this is no longer acceptable. Reported-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-07-05batman-adv: Replace version info instead of appending themSven Eckelmann
The version number of modules build outside of the tree can get revision numbers added. This is useful to give hints about the revision of a distribution package and the used patchset. The prepended source number or branch name doesn't add any additional information which would help to identify problems and can therefore be omitted. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05batman-adv: aggregation checks should use the primary_if pointerMarek Lindner
The packet aggregation needs to ensure that only compatible packets are aggregated. Some of the checks are based on the interface number while assuming that the first interface also is the primary interface which is not always the case. This patch addresses the issue by using the primary_if pointer. Reported-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05batman-adv: broadcast primary OGM on all active hard-interfacesMarek Lindner
The primary interface OGM has to be broadcasted on all hard-interfaces even if the primary interface is not the first interface (if_num = 0). Therefore the code has to compare the originating interface with the primary interface instead of checking the if_num. Reported-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05batman-adv: pass a unique flag arg instead of a sequence of bool onesAntonio Quartulli
now tt_local_event() takes a flags argument instead of a sequence of boolean values which would grow up with the time. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05batman-adv: add_bcast_packet_to_list() takes the sending delay as parameterAntonio Quartulli
In order to make possible to use the broadcast list for delayed sendings the "delay" parameter is now provided instead of using 1 as hardcoded value. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05batman-adv: unify flags for tt_change/tt_local_entry/tt_global_entryAntonio Quartulli
The tt_local_entry structure now has a 'flags' field. This helps to unify the flags format to all the client related structures (tt_global_entry and tt_change). The 'never_purge' field is now encoded in the 'flags' one. To optimise the usage of this field, its length has been increased to 16bit in order to use the eight leading bits (from 0 to 7) to store flags that have to be sent on the wire, while the eight ending ones are used for local computation only. Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the defined values apply to the tt_local_entry, tt_global_entry and the tt_change 'flags' field. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05bnx2x: Fix warning message during 57712/8727 initializationYaniv Rosner
Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock. This warning has no significant meaning, since it occurs prior to the first PHY initialization. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Add autogrEEEn supportYaniv Rosner
Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Fix BCM84833 initializationYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Fix false link indication at link partner when DAC is usedYaniv Rosner
When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Reset PHY due to fan failure for 578xxYaniv Rosner
Add hardware PHY reset action for BCM578xx when fan failure occur. The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Add CL37 BAM for WarpcoreYaniv Rosner
Add CL37 BAM support according to configuration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Change BCM54616S to BCM54618SEYaniv Rosner
Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: PFC fixesYaniv Rosner
Set the source MAC address for PFC packets and update its status during PMF migration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04greth: greth_set_mac_add would corrupt the MAC address.Kristoffer Glembo
The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: bind() fix error return on wrong address familyMarcus Meissner
Hi, Reinhard Max also pointed out that the error should EAFNOSUPPORT according to POSIX. The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN. Other protocols error values in their af bind() methods in current mainline git as far as a brief look shows: EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25, No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip Ciao, Marcus Signed-off-by: Marcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net/wireless: ipw2x00: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: vxge: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: ewrk3: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: depca: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: rionet: Use is_multicast_ether_addrTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: iseries_veth: Use is_unicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: igb: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: de4x5: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: e1000e: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04Update documented default values for various TCP/UDP tunablesMax Matveev
tcp_rmem and tcp_wmem use 1 page as default value for the minimum amount of memory to be used, same as udp_wmem_min and udp_rmem_min. Pages are different size on different architectures - use the right units when describing the defaults. Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Max Matveev <makc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04Update description of net.sctp.sctp_rmem and net.sctp.sctp_wmem tunablesMax Matveev
sctp does not use second and third ("default" and "max") values of sctp_rmem tunable. The format is the same as tcp_rmem but the meaning is different so make the documentation explicit to avoid confusion. sctp_wmem is not used at all. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Max Matveev <makc@redhat.com> Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04b44: use dev_kfree_skb() in b44_tx()Eric Dumazet
b44_tx() is run from softirq handler, it can use dev_kfree_skb() instead of dev_kfree_skb_irq() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04dccp ccid-2: Perform congestion-window validationGerrit Renker
CCID-2's cwnd increases like TCP during slow-start, which has implications for * the local Sequence Window value (should be > cwnd), * the Ack Ratio value. Hence an exponential growth, if it does not reflect the actual network conditions, can quickly lead to instability. This patch adds congestion-window validation (RFC2861) to CCID-2: * cwnd is constrained if the sender is application limited; * cwnd is reduced after a long idle period, as suggested in the '90 paper by Van Jacobson, in RFC 2581 (sec. 4.1); * cwnd is never reduced below the RFC 3390 initial window. As marked in the comments, the code is actually almost a direct copy of the TCP congestion-window-validation algorithms. By continuing this work, it may in future be possible to use the TCP code (not possible at the moment). The mechanism can be turned off using a module parameter. Sampling of the currently-used window (moving-maximum) is however done constantly; this is used to determine the expected window, which can be exploited to regulate DCCP's Sequence Window value. This patch also sets slow-start-after-idle (RFC 4341, 5.1), i.e. it behaves like TCP when net.ipv4.tcp_slow_start_after_idle = 1. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-07-04dccp ccid-2: Use existing function to test for data packetsGerrit Renker
This replaces a switch statement with a test, using the equivalent function dccp_data_packet(skb). It also doubles the range of the field `rx_num_data_pkts' by changing the type from `int' to `u32', avoiding signed/unsigned comparison with the u16 field `dccps_r_ack_ratio'. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-07-04dccp ccid-2: move rfc 3390 function into header fileGerrit Renker
This moves CCID-2's initial window function into the header file, since several parts throughout the CCID-2 code need to call it (CCID-2 still uses RFC 3390). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Leandro Melo de Sales <leandro@ic.ufal.br>