summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-06-13Bluetooth: Add LE SMP Cryptoolbox functionsAnderson Briglia
This patch implements SMP crypto functions called ah, c1, s1 and e. It also implements auxiliary functions. All These functions are needed for SMP keys generation. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Bruna Moreira <bruna.moreira@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for using the crypto subsystemVinicius Costa Gomes
This will allow using the crypto subsystem for encrypting data. As SMP (Security Manager Protocol) is implemented almost entirely on the host side and the crypto module already implements the needed methods (AES-128), it makes sense to use it. There's now a new module option to enable/disable SMP support. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add simple SMP pairing negotiationAnderson Briglia
This implementation only exchanges SMP messages between the Host and the Remote. No keys are being generated. TK and STK generation will be provided in further patches. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Start SMP procedureAnderson Briglia
Start SMP procedure for LE connections. This modification intercepts l2cap received frames and call proper SMP functions to start the SMP procedure. By now, no keys are being used. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Implement the first SMP commandsAnderson Briglia
These simple commands will allow the SMP procedure to be started and terminated with a not supported error. This is the first step toward something useful. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Don't forget to check for LE_LINKGustavo F. Padovan
Otherwise the wrong error can be returned. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: keep reference if any ERTM timer is enabledGustavo F. Padovan
ERTM use the generic L2CAP timer functions to keep a reference to the channel. This is useful for avoiding crashes. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Make timer functions genericGustavo F. Padovan
We now plan to use l2cap_set_timer and l2cap_clear_timer in ERTM timers. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add refcnt to struct l2cap_chanGustavo F. Padovan
struct l2cap_chan has now its own refcnt that is compatible with the socket refcnt, i.e., we won't see sk_refcnt = 0 and chan->refcnt > 0. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add state tracking to struct l2cap_chanGustavo F. Padovan
Now socket state is tracked by struct sock and channel state is tracked by chan->state. At this point both says the same, but this is going to change when we add AMP Support for example. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: add close() callback to l2cap_chan_opsGustavo F. Padovan
close() calls l2cap_sock_kill() on l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: add recv() callback to l2cap_chan_opsGustavo F. Padovan
This abstracts the call to sock_queue_recv_skb() into l2cap_chan_ops->recv(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add l2cap_chan_ops abstractionGustavo F. Padovan
Add an abstraction layer between L2CAP core and its users (only l2cap_sock.c now). The first function implemented is new_connection() that replaces calls to l2cap_sock_alloc() in l2cap_core.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Merge l2cap_chan_create() in the l2cap_sock_alloc()Gustavo F. Padovan
As a first step to remove l2cap_sock_alloc() and l2cap_sock_init() from l2cap_core.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Merge master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth-2.6Gustavo F. Padovan
Conflicts: net/bluetooth/rfcomm/sock.c
2011-06-09Bluetooth: Clean up some code style issuesWaldemar Rymarkiewicz
Fix lines longer than 80 chars in length. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: Kill set but unused variable 'cmd' in cmtp_recv_capimsg()David Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devicesVille Tervo
Some old hci controllers do not accept any mask so leave the default mask on for these devices. < HCI Command: Set Event Mask (0x03|0x0001) plen 8 Mask: 0xfffffbff00000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask (0x03|0x0001) ncmd 1 status 0x12 Error: Invalid HCI Command Parameters Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Tested-by: Corey Boyle <corey@kansanian.com> Tested-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: Do not ignore errors returned from strict_strtol()David Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: fix shutdown on SCO socketsLuiz Augusto von Dentz
shutdown should wait for SCO link to be properly disconnected before detroying the socket, otherwise an application using the socket may assume link is properly disconnected before it really happens which can be a problem when e.g synchronizing profile switch. Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In function 'copy_from_user', inlined from 'rfcomm_sock_setsockopt' at net/bluetooth/rfcomm/sock.c:705: arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace.Filip Palian
Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding byte each. This byte in "cinfo" is copied to userspace uninitialized. Signed-off-by: Filip Palian <filip.palian@pjwstk.edu.pl> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Fix check for the ERTM local busy stateMat Martineau
Local busy is encoded in a bitfield, but was not masked out correctly. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Restore accidentally-deleted lineMat Martineau
When code was moved from l2cap_core.c to l2cap_sock.c in commit 6de0702b5b93da0ef097aa092b4597fbc024ebba, one line was dropped from the old __l2cap_sock_close() implementation. This sk_state change should still be in l2cap_chan_close(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Simplify hci_conn_accept_secure checkWaldemar Rymarkiewicz
If the link key is secure (authenticated or combination 16 digit) the sec_level will be always BT_SECURITY_HIGH. Therefore, instead of checking the link key type simply check the sec_level on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add BT_POWER L2CAP socket option.Jaikumar Ganesh
Add BT_POWER socket option used to control the power characteristics of the underlying ACL link. When the remote end has put the link in sniff mode and the host stack wants to send data we need need to explicitly exit sniff mode to work well with certain devices (For example, A2DP on Plantronics Voyager 855). However, this causes problems with HID devices. Hence, moving into active mode when sending data, irrespective of who set the sniff mode has been made as a socket option. By default, we will move into active mode. HID devices can set the L2CAP socket option to prevent this from happening. Currently, this has been implemented for L2CAP sockets. This has been tested with incoming and outgoing L2CAP sockets for HID and A2DP. Based on discussions on linux-bluetooth and patches submitted by Andrei Emeltchenko. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Verify a pin code in pin_code_replyWaldemar Rymarkiewicz
As we cannot relay on a userspace mgmt api implementation we should verify if pin_code_reply in fact contains the secure pin code. If userspace replied with unsecure pincode when secure was required we will send pin_code_neg_reply to the controller. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove a magic numberWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix sparse & gcc warningsJohannes Berg
sparse complains about a few things that should be static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Set 'peer_addr_type' in hci_le_connect()Andre Guedes
Set the 'peer_addr_type' field of the LE Create Connection command sent in hci_le_connect(). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Check advertising cache in hci_connect()Andre Guedes
When connecting to a LE device, we need to check the advertising cache in order to know the address type of that device. If its advertising entry is not found, the connection is not established and hci_connect() returns error. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove useless check in hci_connect()Andre Guedes
There is no need to check the connection's state since hci_conn_add() has just created a new connection and its state has been set properly. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add 'dst_type' field to struct hci_connAndre Guedes
This patch adds a new field (dst_type) to the struct hci_conn which holds the type of the destination address (bdaddr_t dst). This approach is needed in order to use the struct hci_conn as an abstraction of LE connections in HCI Layer. For non-LE this field is ignored. This patch also set properly the 'dst_type' field after initializing LE hci_conn structures. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Refactor hci_auth_complete_evt functionWaldemar Rymarkiewicz
Replace if(conn) with if(!conn) checking to avoid too many nested statements Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Fix auth_complete_evt for legacy unitsWaldemar Rymarkiewicz
Legacy devices don't re-authenticate the link properly if a link key already exists. Thus, don't update sec_level for this case even if hci_auth_complete_evt indicates success. Otherwise the sec_level will not reflect a real security on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Advertising entries lifetimeAndre Guedes
This patch adds a timer to clear 'adv_entries' after three minutes. After some amount of time, the advertising entries cached during the last LE scan should be considered expired and they should be removed from the advertising cache. It was chosen a three minutes timeout as an initial attempt. This value might change in future. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Clear advertising cache before scanningAndre Guedes
The LE advertising cache should be cleared before performing a LE scanning. This will force the cache to contain only fresh advertising entries. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add Advertising Report Meta Event handlerAndre Guedes
This patch adds a function to handle LE Advertising Report Meta Events. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: LE advertising cacheAndre Guedes
This patch implements the LE advertising cache. It stores sensitive information (bdaddr and bdaddr_type so far) gathered from LE advertising report events. Only advertising entries from connectables devices are added to the cache. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add advertising report meta event structsAnderson Briglia
This patch adds definitions and a new struct for Advertising Report Event from LE and Dual Mode controllers. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Rename __l2cap_chan_close() to l2cap_chan_close()Gustavo F. Padovan
To make it consistent with the rest of the API. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove export of l2cap_chan_clear_timer()Gustavo F. Padovan
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c. This patch also adds a call to l2cap_chan_clear_timer() to the only place in __l2cap_sock_close() that wasn't calling it. It's safe call it there because l2cap_chan_clear_timer() check first for timer_peding(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: create channel timer to replace sk_timerGustavo F. Padovan
The new timer does not belong to struct sock, tought it still touch some sock things, but this will be sorted out soon. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add chan->chan_type struct memberGustavo F. Padovan
chan_type says if our chan is raw(direclty access to HCI), connection less or connection oriented. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create l2cap_chan_send()Gustavo F. Padovan
This move all the sending logic to l2cap_core.c, but we still have a socket dependence there, struct msghdr. It will be removed in some of the further commits. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create __l2cap_chan_close()Gustavo F. Padovan
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close(). At a first look it may not make sense, but with the further cleanups that will come it will. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove unnecessary use of hci_dev_list_lockJohan Hedberg
The get_connections function has no need to use hci_dev_list_lock. The code was there probably because of a copy-paste mistake. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Kill set but not used variable 'l2cap_sk' in ↵David Miller
rfcomm_sock_getsockopt_old() Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix set but not used warningGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Allow unsegmented SDU retries on sock_queue_rcv_skb failureRuiyi Zhang
In L2CAP_SDU_UNSEGMENTED case, if sock_queue_rcv_skb returns error, l2cap_ertm_reassembly_sdu should not return 0 so as to insert the skb into BUSY_QUEUE for later retries. Signed-off-by: Ruiyi Zhang <Ruiyi.Zhang@Atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 03:07:48 +0000