summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-08-13ALSA: hda - fix Copyright debug messageWang Xingchao
As spec said, 1 indicates no copyright is asserted. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-10ALSA : hda - bug fix on checking the supported power states of a codecMengdong Lin
The return value of snd_hda_param_read() is -1 for an error, otherwise it's the supported power states of a codec. The supported power states is a 32-bit value. Bit 31 will be set to 1 if the codec supports EPSS, thus making "sup" negative. And the bit 28:5 is reserved as "0". So a negative value other than -1 shall be further checked. Please refer to High-Definition spec 7.3.4.12 "Supported Power States", thanks! Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-10ALSA: hda - Fix panned "Beep Playback Switch"David Henningsson
When "Beep Playback Switch" had a different value on left and right channels (such as muting left but not right, or vice versa), this could result in the right channel being ignored. This patch enables beep to be sounding from right channel only, and also give correct result back to userspace (e g amixer). Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-10ALSA: cs46xx - signedness bug in snd_cs46xx_codec_read()Dan Carpenter
This function returns its own error codes instead of normal negative error codes. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-09ALSA: hda_intel: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston
This patch adds the Intel HD Audio Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-09ALSA: platform: Check CONFIG_PM_SLEEP instead of CONFIG_PMTakashi Iwai
When CONFIG_PM is set but CONFIG_PM_SLEEP is unset, SIMPLE_DEV_PM_OPS() ignores the given functions, and this leads to compile warnings. For avoiding this, simply check CONFIG_PM_SLEEP instead of CONFIG_PM. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-09ALSA: hda - Fix pop noise in headphones on S3 for Asus X55A, X55VDavid Henningsson
To turn off pin control for the pin was tested, and helped against this issue. BugLink: https://bugs.launchpad.net/bugs/1034779 Tested-by: Chih-Hsyuan Ho <chih.ho@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-08ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo IdeapadDavid Henningsson
The same ID is twice in the quirk table, so the second one is not used. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-07ALSA: hda - Fix ugly debug prints with CONFIG_SND_VERBOSE_PRINTK=yTakashi Iwai
When CONFIG_SND_VERBOSE_PRINTK=y is set, the debug print in hda_auto_parser.c looks really ugly like: ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0 ALSA sound/pci/hda/hda_auto_parser.c:334 dig-out=0x12/0x0 ALSA sound/pci/hda/hda_auto_parser.c:335 inputs: ALSA sound/pci/hda/hda_auto_parser.c:339 Mic=0x11ALSA sound/pci/hda/hda_auto_parser.c:339 Line=0x10 ALSA sound/pci/hda/hda_auto_parser.c:341 ALSA sound/pci/hda/hda_auto_parser.c:343 dig-in=0x13 Better to put one item at each line. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-07ALSA: hda - remove redundant auto quirks for conexant 506xDavid Henningsson
Now that the auto model is the default, these quirks are redundant and can be removed. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-07ALSA: hda - remove quirk for Dell Vostro 1015David Henningsson
This computer is confirmed working with model=auto on kernel 3.2. Also, parsing fails with hda-emu with the current model. Cc: stable@kernel.org (3.2+) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-07ALSA: hda - add dock support for Thinkpad X230Felix Kaechele
As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to correctly set up the pins for the dock port. Signed-off-by: Felix Kaechele <felix@fetzig.org> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-06ALSA: hda - Fix regression of HDMI codec probingTakashi Iwai
The commit c4bfe94a causes a regression on some codecs at probing. Since this was just a workaround to shut up a kernel warning, it'd be better to revert and fix properly. So we ended up with re-adding the cleanup callback. Tested-and-reported-by: Matt Horan <matt@matthoran.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-06ALSA: hda - add dock support for Thinkpad T430sPhilipp A. Mohrenweiser
Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow sound in docking station. Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3 Cc: stable@kernel.org Signed-off-by: Philipp A. Mohrenweiser <phiamo@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-03ALSA: emu10k1: Avoid access to invalid pages when period=1Takashi Iwai
When period=1, the driver tries to allocate a bit bigger buffer than requested by the user due to the irq latency tolerance. This may lead to accesses over the actually allocated pages. This patch adds a check of the page index and assigns the silent page when it's over the given buffer size. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-03ALSA: PCM: Fix possible memory leaks in the error pathTakashi Iwai
When the first page allocation failed for sgbuf, it leaks the records that have been formerly allocated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-02Merge tag 'asoc-3.6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Additional updates for 3.6 A few updates for issues discovered during the merge window, the main one being the fix for the issues with defaulting to use of regmap without properly checking if there was I/O in place already.
2012-08-02ASoC: core: Fix check before defaulting to regmapMark Brown
Check if the chip has provided a write operation (which is mandatory for I/O) rather than looking for control data as some of the MFDs use a global for this. Also skip the attempt if there's no regmap available by device in case things get confused by the attempt to default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2012-08-02ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VCTakashi Iwai
Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS doesn't set up the pins properly. Enable the pins as well as on Thinkpad X230 Tablet. Reported-and-tested-by: Mario <anyc@hadiko.de> Cc: <stable@vger.kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-01ALSA: snd-usb: fix clock source validity indexDaniel Mack
uac_clock_source_is_valid() uses the control selector value to access the bmControls bitmap of the clock source unit. This is wrong, as control selector values start from 1, while the bitmap uses all available bits. In other words, "Clock Validity Control" is stored in D3..2, not D5..4 of the clock selector unit's bmControls. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Andreas Koch <andreas@akdesigninc.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-31ASoC: wm8962: Allow VMID time to fully rampMark Brown
Required for reliable power up from cold. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-07-31ASoC: AC97 doesn't use regmap by defaultManuel Lauss
Since commit 38cbf9598feba97de9f9b43efa9153fd7c1a2ec9 ("ASoC: core: Try to use regmap if the driver doesn't set up any I/O") any ASoC codec which doesn't set codec::control_data is assumed to use regmap. That doesn't work with AC97 so this workaround sets the codec::control_data member to a random value to restore proper behaviour. Tested with WM9712. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-31ASoC: sgtl5000: enable VAG_POWER for LINE_INDong Aisheng
LINE_IN also needs VAG_POWER on or we may hear noise when directly route LINE_IN to Headphone Mux. Tested on imx28evk. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-31ASoC: ab8500: Inform SoC Core that we have our own I/O arrangementsLee Jones
If codec->control_data is not populated SoC Core assumes we want to use regmap, which fails catastrophically, as we don't have one: Unable to handle kernel NULL pointer dereference at virtual address 00000080 pgd = c0004000 [00000080] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 Not tainted (3.5.0-rc6-00884-g0b2419e-dirty #130) PC is at regmap_read+0x10/0x5c LR is at hw_read+0x80/0x90 pc : [<c01a91b8>] lr : [<c0216804>] psr: 60000013 Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-31ALSA: hda - Fix mute-LED GPIO initialization for IDT codecsTakashi Iwai
The IDT codecs initializes the GPIO setup for mute LEDs via snd_hda_sync_vmaster_hook(). This works in most cases except for the very first call, which is called before PCM and control creations. Thus before Master switch is set manually via alsactl, the mute LED may show the wrong state, depending on the polarity. Now it's fixed by calling the LED-status update function manually when no vmaster is set yet. Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-31ALSA: hda - Add descriptions for missing IDT 92HD83x modelsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-31ALSA: hda - Fix polarity of mute LED on HP Mini 210Takashi Iwai
The commit a3e199732b made the LED working again on HP Mini 210 but with a wrong polarity. This patch fixes the polarity for this machine, and also introduce a new model string "hp-inv-led". Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923 Cc: <stable@vger.kernel.org> [v3.3+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-30ALSA: es1688 - freeup resources on init failureFengguang Wu
This will fix the following oops: [ 6.169981] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688) [ 6.170851] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e9 #14 [ 6.170851] Call Trace: [ 6.170851] [<c1062237>] ? __setup_irq+0x3c7/0x420 [ 6.170851] [<c1062486>] ? request_threaded_irq+0x76/0x140 [ 6.170851] [<c1290220>] ? snd_es1688_ioctl+0x10/0x10 [ 6.170851] [<c10624c2>] ? request_threaded_irq+0xb2/0x140 [ 6.170851] [<c1291196>] ? snd_es1688_create+0x96/0x330 [ 6.170851] [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2 [ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.170851] [<c10db22f>] ? sysfs_create_link+0xf/0x20 [ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.170851] [<c11d1502>] ? isa_bus_probe+0x12/0x20 [ 6.170851] [<c11c9b95>] ? driver_probe_device+0x55/0x1c0 [ 6.170851] [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30 [ 6.170851] [<c13705ea>] ? klist_next+0x6a/0xe0 [ 6.170851] [<c11d15c1>] ? isa_bus_match+0x21/0x40 [ 6.170851] [<c11c8a24>] ? bus_for_each_drv+0x34/0x70 [ 6.170851] [<c11c9e4b>] ? device_attach+0x7b/0x90 [ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.170851] [<c11c8bff>] ? bus_probe_device+0x5f/0x80 [ 6.170851] [<c11c7493>] ? device_add+0x573/0x620 [ 6.170851] [<c1042820>] ? complete_all+0x40/0x60 [ 6.170851] [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30 [ 6.170851] [<c11d16c6>] ? isa_register_driver+0xb6/0x150 [ 6.170851] [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf [ 6.170851] [<c15a99bc>] ? do_one_initcall+0x7f/0x12b [ 6.170851] [<c15a9b7a>] ? kernel_init+0x112/0x1a9 [ 6.170851] [<c15a9423>] ? do_early_param+0x77/0x77 [ 6.170851] [<c15a9a68>] ? do_one_initcall+0x12b/0x12b [ 6.170851] [<c13aefbe>] ? kernel_thread_helper+0x6/0xd [ 6.190170] es1688: can't grab IRQ 5 [ 6.190613] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688) [ 6.191566] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e9 #14 [ 6.192394] Call Trace: [ 6.192685] [<c1062237>] ? __setup_irq+0x3c7/0x420 [ 6.193342] [<c1062486>] ? request_threaded_irq+0x76/0x140 [ 6.194081] [<c1290220>] ? snd_es1688_ioctl+0x10/0x10 [ 6.194607] [<c10624c2>] ? request_threaded_irq+0xb2/0x140 [ 6.194607] [<c1291196>] ? snd_es1688_create+0x96/0x330 [ 6.194607] [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2 [ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.194607] [<c10db22f>] ? sysfs_create_link+0xf/0x20 [ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.194607] [<c11d1502>] ? isa_bus_probe+0x12/0x20 [ 6.194607] [<c11c9b95>] ? driver_probe_device+0x55/0x1c0 [ 6.194607] [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30 [ 6.194607] [<c13705ea>] ? klist_next+0x6a/0xe0 [ 6.194607] [<c11d15c1>] ? isa_bus_match+0x21/0x40 [ 6.194607] [<c11c8a24>] ? bus_for_each_drv+0x34/0x70 [ 6.194607] [<c11c9e4b>] ? device_attach+0x7b/0x90 [ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.194607] [<c11c8bff>] ? bus_probe_device+0x5f/0x80 [ 6.194607] [<c11c7493>] ? device_add+0x573/0x620 [ 6.194607] [<c1042820>] ? complete_all+0x40/0x60 [ 6.194607] [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30 [ 6.194607] [<c11d16c6>] ? isa_register_driver+0xb6/0x150 [ 6.194607] [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf [ 6.194607] [<c15a99bc>] ? do_one_initcall+0x7f/0x12b [ 6.194607] [<c15a9b7a>] ? kernel_init+0x112/0x1a9 [ 6.194607] [<c15a9423>] ? do_early_param+0x77/0x77 [ 6.194607] [<c15a9a68>] ? do_one_initcall+0x12b/0x12b [ 6.194607] [<c13aefbe>] ? kernel_thread_helper+0x6/0xd [ 6.210779] es1688: can't grab IRQ 5 [ 6.211305] gusextreme: probe of gusextreme.0 failed with error -16 Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-29ALSA: hda - Workaround for silent output on VAIO Z with ALC889Takashi Iwai
On recent kernels, Realtek codec parser tries to optimize the routing aggressively and take the headphone output as primary at first. This caused a regression on VAIO Z with ALC889, the silent output from the speaker. The problem seems that the speaker pin must be connected to the first DAC (0x02) on this machine by some reason although the codec itself advertises the flexible routing with any DACs. This patch adds a fix-up for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Reported-and-tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-27ALSA: hda - Fix WARNING from HDMI/DP parserTakashi Iwai
The recent fix to converter detaching timing in patch_hdmi.c leads to a kernel WARNING due to a sanity check when the debug option is set. Add a workaround by setting a dummy hinfo->nid. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-26ASoC: omap: Add missing modules aliases to get sound working on omap devicesGuillaume Gardet
This patch add missing modules aliases to get sound working on omap devices. Tested on Beagleboard xM rev. B. This patch is against 3.5-rc6 vanilla. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org> From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001 From: Guillaume GARDET <guillaume.gardet@oliseo.fr> Date: Tue, 10 Jul 2012 13:47:16 +0200 Subject: [PATCH] Add missing modules aliases to fix audio on omap devices Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26sound: tegra_alc5632: Adjust to of_get_named_gpio() changeRoland Stigge
of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_alc5632 to this. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26sound: tegra_wm8903: Adjust to of_get_named_gpio() changeRoland Stigge
of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_wm8903 to this. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26ASoC: mc13783: Provide codec->control_dataFabio Estevam
If codec->control_data is not provided, the following crash happens: Unable to handle kernel NULL pointer dereference at virtual address 00000078 pgd = 80004000 [00000078] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.5.0-next-20120725+ #1263) PC is at regmap_read+0x18/0x64 LR is at hw_read+0x50/0x98 pc : [<802bcd90>] lr : [<803cad18>] psr: 60000013 ... Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26ALSA: hda - Detach from converter at closing in patch_hdmi.cTakashi Iwai
The generic HDMI code detaches the converter from the stream when unused, but it must be done rather in the close callback instead of the cleanup callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-26ASoC: ux500: Include the correct header filesLee Jones
Thought to be another merge error, board-mop500-msp.h has never existed in the upstream kernel, only msp.h. This patch changes the include files to match the existing file name. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-26ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210Takashi Iwai
BIOS on HP Mini 210 doesn't provide the proper "HP_Mute_LED" DMI string, thus the driver doesn't initialize the GPIO, too. In the earlier kernel, the driver falls back to GPIO1, but since 3.3 we've stopped this due to other wrongly advertised machines. For fixing this particular case, add a new model type to specify the default polarity explicitly so that the fallback to GPIO1 is handled. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923 Cc: <stable@vger.kernel.org> [v3.3+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-25ALSA: mpu401: Fix missing initialization of irq fieldTakashi Iwai
The irq field of struct snd_mpu401 is supposed to be initialized to -1. Since it's set to zero as of now, a probing error before the irq installation results in a kernel warning "Trying to free already-free IRQ 0". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-25ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecsTakashi Iwai
We've got a bug report about the silent output from the headphone on a mobo with VT2021, and spotted out that this was because of the wrong D3 state on the DAC for the headphone output. The bug is triggered by the incomplete check for this DAC in set_widgets_power_state_vt1718S(). It checks only the connectivity of the primary output (0x27) but doesn't consider the path from the headphone pin (0x28). Now this patch fixes the problem by checking both pins for DAC 0x0b. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-24ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQsMark Brown
Ensures that we don't interact badly with the power management framework, especially in the cases where we're doing deferred work or we're using a direct GPIO for these signals. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probeDong Aisheng
There's a driver bug that sgtl5000 dapm widget kcontrols do not work. e.g. can not select capture mux with amixer tool(no error info prompted). The root cause is that we still call snd_soc_dapm_new_widgets in codec driver probe function afer converting to table based widgets. This will cause the card dapm widgets are instantiated before the dapm_routes are registered. Then, no available dapm widget pathes can be found during instantiation which finally will cause soc_dapm_mux_update_power to fail(can not find correct path with kcontrol) in snd_soc_dapm_put_enum_double function. Here we remove the unneeded snd_soc_dapm_new_widgets in codec probe and let the soc core to handle the register sequence properly. Then we can fix above issue. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24ASoC: mxs-saif: set a base clock rate for EXTMASTER mode workDong Aisheng
Set an initial clock rate for the saif internal logic to work properly. This is important when working in EXTMASTER mode that uses the other saif's BITCLK&LRCLK but it still needs a basic clock which should be fast enough for the internal logic. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24ASoC: mxs-saif: fix clock prepare and enable unbalance issueDong Aisheng
Currently we directly call a clock_enable in trigger function without a clk_prepare as pair first. This will cause system hang immediately when run capture because the clock was not prepared(playback does not hang because the clock was prepared already by get_mclk before), a warning message in clock framework may cause a deadlock to reclaim clock lock (see: pl011_console_write). Here we prepare clock first in hw_param, then enable it in trigger function to guarantee the balance. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23ASoC: wm8994: Ensure there are enough BCLKs for four channelsMark Brown
Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-07-23Merge tag 'asoc-3.6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Additional updates for 3.6 A few more fixes for 3.6, some of which are relatively important - they've all been in -next for at least some time. - DAPM fixes for the recent locking changes. - Fix for _PRE and _POST widgets (which have been broken for a few releases now). - A couple of minor driver updates.
2012-07-23Merge branch 'for-3.5' into for-3.6Mark Brown
2012-07-23ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvementsMark Brown
Ever since the DAPM performance improvements we've been marking all widgets as not dirty after each DAPM run. Since _PRE and _POST events aren't part of the DAPM graph this has rendered them non-functional, they will never be marked dirty again and thus will never be run again. Fix this by skipping them when marking widgets as not dirty. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@vger.kernel.org
2012-07-20ALSA: hda - add dock support for Thinkpad X230 TabletDavid Henningsson
Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953 Tested-by: John McCarron <john.mccarron@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-20ALSA: hda - Turn on PIN_OUT from hdmi playback prepare.Dylan Reid
Turn on the pin widget's PIN_OUT bit from playback prepare. The pin is enabled in open, but is disabled in hdmi_init_pin which is called during system resume. This causes a system suspend/resume during playback to mute HDMI/DP. Enabling the pin in prepare instead of open allows calling snd_pcm_prepare after a system resume to restore audio. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-19Merge branch 'topic/pm-convert' into for-nextTakashi Iwai
This merges the changes for converting to new PM ops for platform and some other drivers. Also move some header files to local places from the public include/sound.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 08:07:30 +0000