summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-09-30ASoC: Remove unneeded use of spi_bus_typeDimitris Papastamos
No need to explicitly set the bus type, spi_register_driver does that for us. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-30ASoC: Provide microphone bias configuration for WM8962Mark Brown
Add the widget for MICBIAS power control and allow configuration of the microphone bias setup via the platform data for the WM8962. When microphone status signals are brought out to GPIO this should be sufficient to enable microphone detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30ASoC: Mark WM8962 Additional Control 4 register as volatileMark Brown
There are some status bits for microphone detection in here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-29ASoC: Initial WM8962 IRQ supportMark Brown
Provide an initial hookup for interrupts on the WM8962. Currently we simply report error status via log messages if an IRQ is provided for the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-29ASoC: Lowercase WM8962 CODEC nameMark Brown
For consistency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-28ASoC: Fix masking of WM8962 FLL1 registerMark Brown
When configuring the FLL we preserve the FLL enable configuration in order to allow us to reenable the FLL after configuration but we do not clear the other bits in the register, causing old configuration to be preserved. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-28ASoC: WM8985: Use the correct macro for the kcontrol definedDimitris Papastamos
Since we are using custom get/put handlers use SOC_ENUM_SINGLE_EXT_DECL instead of the original SOC_ENUM_SINGLE_DECL macro. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-27ASoC: Fix a compile warning for printk formatTakashi Iwai
sound/soc/codecs/wm8985.c: In function 'wm8985_hw_params': sound/soc/codecs/wm8985.c:731:2: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Actually the variable is fine as int. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-25Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-09-25ASoC: Add Jassi Brar as Samsung maintainerMark Brown
Since Jassi is doing so much good work and can offer such good review for the Samsung CPU support add an entry for the Samsung ASoC drivers to MAINTAINERS listing him. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: WM8985: Remove unneeded declaration.Dimitris Papastamos
We are not using the private data in this function, so get rid of it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-24ASoC: Clean up AC'97 glue driverMark Brown
Remove version number and clean up some indentation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Add debug logging for s3c-ac97 resetsMark Brown
Helps tracing errors further up the stack. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Convert s3c-ac97 to pr_() macrosMark Brown
Could use dev_() but we'd have to remember the struct device somewhere and it wouldn't make the logging clearer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Clean up the CODEC device as well as the board for SMDK WM9713Mark Brown
Otherwise we try to re-register the CODEC device if the module is reloaded and sysfs becomes miserable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Clarify naming for SMDK WM9713 driverMark Brown
At least some of the systems using this device have multiple audio subsystems so provide some guidance to userspace about which one this is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Remove unneeded WM9713 header include from SMDK WM9713 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-23ASoC: Fix incorrect parameter to snd_soc_codec_volatile_registerDimitris Papastamos
We need to pass the register index and not the register value. This patch depends on my previous patch "ASoC: Delegate to hw specific read for volatile registers". Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-23ASoC: Delegate to hw specific read for volatile registersDimitris Papastamos
Ensure that reads on volatile registers will correctly delegate to the bus specific read function. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-23ASoC: adapt multi-componentism againTakashi Iwai
Go back to the new world order. (Also fixed indentation.) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-23Merge branch 'for-2.6.36' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2010-09-22ASoC: Fix multi-componentismMark Brown
Spot the build testing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-22ASoC: Return -1 instead of -EINVAL to ensure consistencyDimitris Papastamos
The code can't really cope with I/O errors, so it would be better to be consistent throughout all cache functions and return -1 instead of -EINVAL. The return value of snd_soc_read(...) is mostly checked in the probe function and nowhere else. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-22ASoC: Report error codes for card DAI instantiation failuresMark Brown
Also clean up the error print a bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-22Merge branch 'for-2.6.37' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
2010-09-22Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-09-22ASoC: Fix soc-cache buffer overflow bugDimitris Papastamos
Make sure we stay within the cache boundaries when updating the register cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-21ASoC: Fix soc-cache buffer overflow bugDimitris Papastamos
Make sure we stay within the cache boundaries when updating the register cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-21ASoC: Remove extra rtd->dev.init_name assignment in soc_probe_dai_linkJarkko Nikula
rtd->dev.init_name is set twice in soc_probe_dai_link. I removed the first assignement from dai_link->stream_name since then there won't be sysfs name changes and usually dai_link->name seems to fit anyway better for a sysfs directory name. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-21ASoC: Fix merge issue with WM8962 control additionMark Brown
Let's not add the core controls twice. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-21ASoC: Report error code when failing to add controlsMark Brown
Helps with diagnostics. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-21ASoC: Prototype s3c64xx_i2s_get_clock()Mark Brown
So machine drivers can see the declaration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20ASoC: fsi: merge fsi_data_push/pop to fsi_fifo_data_ctrlKuninori Morimoto
Current FSI driver had data push/pop functions. But the main operation of these 2 were very similar. This mean it is possible to merge these to 1 function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-20ASoC: fsi: modify variable name to easy to understandKuninori Morimoto
Current FSI driver is using data-length / width / number / offset for variables. But it was a very confusing name. This patch rename them to easy to understand, and add new functions for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-20ASoC: Fix WM8978/migor driver name conflictMark Brown
Standardise on 'wm8978' as the name for the CODEC. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20ASoC: tlv320aic3x: Let the codec hit SND_SOC_BIAS_OFF when idleJarkko Nikula
Now codec hits the SND_SOC_BIAS_OFF also when it is idle. This is also the default state after probing and codec is left unconfigured and unpowered by default. Initialization will happen when the bias state changes and aic3x_set_power does power-up and cache sync. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20ASoC: tlv320aic3x: Use regulator notifiers for optimizing the cache syncJarkko Nikula
There is no need to reset the codec and perform cache sync if none of the supply regulators were not disabled. Patch registers a notifier callback for each supply and callback then sets a flag to indicate when cache sync is required. HW writes are also needless when codec bias is off so cache_only flag is set independently of actual supply regulators state. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20ASoC: tlv320aic3x: Add runtime regulator control to aic3x_set_bias_levelJarkko Nikula
Now all the regulators are disabled when entering into SND_SOC_BIAS_OFF and enabled when coming back to SND_SOC_BIAS_STANDBY state. Currently this runtime control happens only with suspend/resume as this patch does not change the default idle behavior. This patch manages all the regulators and reset since it seems that register sync is needed even if only analog supplies AVDD and DRVDD are disabled. This was noted when the system was running with idle behavior changed and IOVDD and DVDD were on. It is not known are all the registers needed to sync or only some subset of them. Therefore patch plays safe and does always full shutdown/power-up. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20ASoC: tlv320aic3x: Move regulator management from i2c to soc domainJarkko Nikula
It will be easier to keep regulator enable/disable calls in sync when dynamic regulator management is added if regulator management is moved from aic3x_i2c_probe/_remove to aic3x_probe/_remove. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20Merge remote branch 'asoc/for-2.6.37' into for-2.6.37Liam Girdwood
2010-09-20ASoC: tlv320aic3x: Add virtual output pin DetectionJarkko Nikula
Purpose of this virtual Detection pin is to keep codec bias on whenever the GPIO or jack detection features are needed. Jack detection needs a mic bias so machine drivers can construct a following route for instance for keeping the path and codec bias on: "Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec. For the GPIO the machine driver can force the pin on with snd_soc_dapm_force_enable_pin. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-20Merge remote branch 'broonie-asoc/for-2.6.37' into for-2.6.37Liam Girdwood
2010-09-19ASoC: fsi: Add fsi_dma_soft_push/pop functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19ASoC: fsi: modify noisy comment outKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19ASoC: fsi: Add fsi_dma_get_areaKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19ASoC: fix SIU driver breakage, occurred during the multi-component transitionGuennadi Liakhovetski
This patch fixes multiple bugs and a typo, occurred during the multi- component transition. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19sh: fix an SIU device name mismatchGuennadi Liakhovetski
Recent ASoC changes unified all PCM names, fix the platform code to match. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19ASoC: fix compile breakage of the sh/siu driverGuennadi Liakhovetski
The sh/siu ASoC driver doesn't compile because of a function defined static in the source and extern in a header. Remove the unneeded declaration in the header. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-09-19ASoC: fix clkdev API usage in sh/migor.cGuennadi Liakhovetski
The clkdev API doesn't use .name and .id members of struct clk for clock lookup. Instead clocks should be added to a lookup list. Without this patch audio om the Migo-R board fails silently. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-04 08:15:08 +0000