summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-08-21f2fs: remove rewrite_node_pageJaegeuk Kim
I think we need to let the dirty node pages remain in the page cache instead of rewriting them in their places. So, after done with successful recovery, write_checkpoint will flush all of them through the normal write path. Through this, we can avoid potential error cases in terms of block allocation. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: avoid double lock in truncate_blocksJaegeuk Kim
The init_inode_metadata calls truncate_blocks when error is occurred. The callers holds f2fs_lock_op, so we should not call it again in truncate_blocks. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: prevent checkpoint during roll-forwardJaegeuk Kim
Any checkpoint should not be done during the core roll-forward procedure. Especially, it includes error cases too. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: add WARN_ON in f2fs_bug_onJaegeuk Kim
This patch adds WARN_ON when f2fs_bug_on is disable to see kernel messages. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: handle EIO not to break fs consistencyJaegeuk Kim
There are two rules when EIO is occurred. 1. don't write any checkpoint data to preserve the previous checkpoint 2. don't lose the cached dentry/node/meta pages So, at first, this patch adds set_page_dirty in f2fs_write_end_io's failure. Then, writing checkpoint/dentry/node blocks is not allowed. Note that, for the data pages, we can't just throw away by redirtying them. Otherwise, kworker can fall into infinite loop to flush them. (Ref. xfstests/019) Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21spi: davinci: fix SPI_NO_CS functionalityGrygorii Strashko
The driver should not touch CS lines if SPI_NO_CS flag is set. This patch fixes it as this functionality was broken accidentally by commit a88e34ea213e1b ("spi: davinci: add support to configure gpio cs through dt"). Fixes: a88e34ea213e1b ("spi: davinci: add support to configure gpio cs through dt") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-21f2fs: check s_dirty under cp_mutexJaegeuk Kim
It needs to check s_dirty under cp_mutex, since s_dirty is reset under that mutex. And previous condition was not correct, since we can omit doing checkpoint when checkpoint was done followed by all the node pages were written back. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: unlock_page when node page is redirtied outJaegeuk Kim
This patch fixes missing unlock_page when a node page is redirtied out. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: introduce f2fs_cp_error for readabilityJaegeuk Kim
This patch adds f2fs_cp_error for readability. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: give a chance to mount again when encountering errorsJaegeuk Kim
This patch gives another chance to try mount process when we encounter an error. This makes an effect on the roll-forward recovery failures as well. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21f2fs: trigger release_dirty_inode in f2fs_put_superJaegeuk Kim
The generic_shutdown_super calls sync_filesystem, evict_inode, and then f2fs_put_super. In f2fs_evict_inode, we remain some dirty inode information so we should release them at f2fs_put_super. Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-21HID: fix a couple of off-by-onesJiri Kosina
There are a few very theoretical off-by-one bugs in report descriptor size checking when performing a pre-parsing fixup. Fix those. Cc: stable@vger.kernel.org Reported-by: Ben Hawkes <hawkes@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-21HID: logitech: perform bounds checking on device_id early enoughJiri Kosina
device_index is a char type and the size of paired_dj_deivces is 7 elements, therefore proper bounds checking has to be applied to device_index before it is used. We are currently performing the bounds checking in logi_dj_recv_add_djhid_device(), which is too late, as malicious device could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the problem in one of the report forwarding functions called from logi_dj_raw_event(). Fix this by performing the check at the earliest possible ocasion in logi_dj_raw_event(). Cc: stable@vger.kernel.org Reported-by: Ben Hawkes <hawkes@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-21HID: logitech: fix bounds checking on LED report sizeJiri Kosina
The check on report size for REPORT_TYPE_LEDS in logi_dj_ll_raw_request() is wrong; the current check doesn't make any sense -- the report allocated by HID core in hid_hw_raw_request() can be much larger than DJREPORT_SHORT_LENGTH, and currently logi_dj_ll_raw_request() doesn't handle this properly at all. Fix the check by actually trimming down the report size properly if it is too large. Cc: stable@vger.kernel.org Reported-by: Ben Hawkes <hawkes@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-21ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clockStefan Herbrechtsmeier
Set 'ti,set-rate-parent' property for the dpll4_m5x2_ck clock, which is used for the ISP functional clock. This fixes the OMAP3 ISP driver's clock rate configuration on OMAP34xx, which needs the rate to be propagated properly to the divider node (dpll4_m5_ck). Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: <linux-media@vger.kernel.org> Cc: <linux-omap@vger.kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-08-21Btrfs: fix filemap_flush call in btrfs_file_releaseChris Mason
We should only be flushing on close if the file was flagged as needing it during truncate. I broke this with my ordered data vs transaction commit deadlock fix. Thanks to Miao Xie for catching this. Signed-off-by: Chris Mason <clm@fb.com> Reported-by: Miao Xie <miaox@cn.fujitsu.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com>
2014-08-21Btrfs: fix crash on endio of reading corrupted blockLiu Bo
The crash is ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:2124! [...] Workqueue: btrfs-endio normal_work_helper [btrfs] RIP: 0010:[<ffffffffa02d6055>] [<ffffffffa02d6055>] end_bio_extent_readpage+0xb45/0xcd0 [btrfs] This is in fact a regression. It is because we forgot to increase @offset properly in reading corrupted block, so that the @offset remains, and this leads to checksum errors while reading left blocks queued up in the same bio, and then ends up with hiting the above BUG_ON. Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21btrfs: fix leak in qgroup_subtree_accounting() error pathEric Sandeen
Coverity pointed this out; in the newly added qgroup_subtree_accounting(), if btrfs_find_all_roots() returns an error, we leak at least the parents pointer, and possibly the roots pointer, depending on what failure occurs. If btrfs_find_all_roots() returns an error, we need to free up all allocations before we return. "roots" is initialized to NULL, so it should be safe to free it unconditionally (ulist_free() handles that case). Cc: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21btrfs: Use right extent length when inserting overlap extent map.Qu Wenruo
When current btrfs finds that a new extent map is going to be insereted but failed with -EEXIST, it will try again to insert the extent map but with the length of sectorsize. This is OK if we don't enable 'no-holes' feature since all extent space is continuous, we will not go into the not found->insert routine. But if we enable 'no-holes' feature, it will make things out of control. e.g. in 4K sectorsize, we pass the following args to btrfs_get_extent(): btrfs_get_extent() args: start: 27874 len 4100 28672 27874 28672 27874+4100 32768 |-----------------------| |---------hole--------------------|---------data----------| 1) not found and insert Since no extent map containing the range, btrfs_get_extent() will go into the not_found and insert routine, which will try to insert the extent map (27874, 27847 + 4100). 2) first overlap But it overlaps with (28672, 32768) extent, so -EEXIST will be returned by add_extent_mapping(). 3) retry but still overlap After catching the -EEXIST, then btrfs_get_extent() will try insert it again but with 4K length, which still overlaps, so -EEXIST will be returned. This makes the following patch fail to punch hole. d77815461f047e561f77a07754ae923ade597d4e btrfs: Avoid trucating page or punching hole in a already existed hole. This patch will use the right length, which is the (exsisting->start - em->start) to insert, making the above patch works in 'no-holes' mode. Also, some small code style problems in above patch is fixed too. Reported-by: Filipe David Manana <fdmanana@gmail.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Filipe David Manana <fdmanana@suse.com> Tested-by: Filipe David Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: clone, don't create invalid hole extent mapFilipe Manana
When cloning a file that consists of an inline extent, we were creating an extent map that represents a non-existing trailing hole starting at a file offset that isn't a multiple of the sector size. This happened because when processing an inline extent we weren't aligning the extent's length to the sector size, and therefore incorrectly treating the range [inline_extent_length; sector_size[ as a hole. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: don't monopolize a core when evicting inodeFilipe Manana
If an inode has a very large number of extent maps, we can spend a lot of time freeing them, which triggers a soft lockup warning. Therefore reschedule if we need to when freeing the extent maps while evicting the inode. I could trigger this all the time by running xfstests/generic/299 on a file system with the no-holes feature enabled. That test creates an inode with 11386677 extent maps. $ mkfs.btrfs -f -O no-holes $TEST_DEV $ MKFS_OPTIONS="-O no-holes" ./check generic/299 generic/299 382s ... Message from syslogd@debian-vm3 at Aug 7 10:44:29 ... kernel:[85304.208017] BUG: soft lockup - CPU#0 stuck for 22s! [umount:25330] 384s Ran: generic/299 Passed all 1 tests $ dmesg (...) [86304.300017] BUG: soft lockup - CPU#0 stuck for 23s! [umount:25330] (...) [86304.300036] Call Trace: [86304.300036] [<ffffffff81698ba9>] __slab_free+0x54/0x295 [86304.300036] [<ffffffffa02ee9cc>] ? free_extent_map+0x5c/0xb0 [btrfs] [86304.300036] [<ffffffff811a6cd2>] kmem_cache_free+0x282/0x2a0 [86304.300036] [<ffffffffa02ee9cc>] free_extent_map+0x5c/0xb0 [btrfs] [86304.300036] [<ffffffffa02e3775>] btrfs_evict_inode+0xd5/0x660 [btrfs] [86304.300036] [<ffffffff811e7c8d>] ? __inode_wait_for_writeback+0x6d/0xc0 [86304.300036] [<ffffffff816a389b>] ? _raw_spin_unlock+0x2b/0x40 [86304.300036] [<ffffffff811d8cbb>] evict+0xab/0x180 [86304.300036] [<ffffffff811d8dce>] dispose_list+0x3e/0x60 [86304.300036] [<ffffffff811d9b04>] evict_inodes+0xf4/0x110 [86304.300036] [<ffffffff811bd953>] generic_shutdown_super+0x53/0x110 [86304.300036] [<ffffffff811bdaa6>] kill_anon_super+0x16/0x30 [86304.300036] [<ffffffffa02a78ba>] btrfs_kill_super+0x1a/0xa0 [btrfs] [86304.300036] [<ffffffff811bd3a9>] deactivate_locked_super+0x59/0x80 [86304.300036] [<ffffffff811be44e>] deactivate_super+0x4e/0x70 [86304.300036] [<ffffffff811dec14>] mntput_no_expire+0x174/0x1f0 [86304.300036] [<ffffffff811deab7>] ? mntput_no_expire+0x17/0x1f0 [86304.300036] [<ffffffff811e0517>] SyS_umount+0x97/0x100 (...) Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: fix hole detection during file fsyncFilipe Manana
The file hole detection logic during a file fsync wasn't correct, because it didn't look back (in a previous leaf) for the last file extent item that can be in a leaf to the left of our leaf and that has a generation lower than the current transaction id. This made it assume that a hole exists when it really doesn't exist in the file. Such false positive hole detection happens in the following scenario: * We have a file that has many file extent items, covering 3 or more btree leafs (the first leaf must contain non file extent items too). * Two ranges of the file are modified, with their extent items being located at 2 different leafs and those leafs aren't consecutive. * When processing the second modified leaf, we weren't checking if some file extent item exists that is located in some leaf that is between our 2 modified leafs, and therefore assumed the range defined between the last file extent item in the first leaf and the first file extent item in the second leaf matched a hole. Fortunately this didn't result in overriding the log with wrong data, instead it made the last loop in copy_items() attempt to insert a duplicated key (for a hole file extent item), which makes the file fsync code return with -EEXIST to file.c:btrfs_sync_file() which in turn ends up doing a full transaction commit, which is much more expensive then writing only to the log tree and wait for it to be durably persisted (as well as the file's modified extents/pages). Therefore fix the hole detection logic, so that we don't pay the cost of doing full transaction commits. I could trigger this issue with the following test for xfstests (which never fails, either without or with this patch). The last fsync call results in a full transaction commit, due to the -EEXIST error mentioned above. I could also observe this behaviour happening frequently when running xfstests/generic/075 in a loop. Test: _cleanup() { _cleanup_flakey rm -fr $tmp } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/dmflakey # real QA test starts here _supported_fs btrfs _supported_os Linux _require_scratch _require_dm_flakey _need_to_be_root rm -f $seqres.full # Create a file with many file extent items, each representing a 4Kb extent. # These items span 3 btree leaves, of 16Kb each (default mkfs.btrfs leaf size # as of btrfs-progs 3.12). _scratch_mkfs -l 16384 >/dev/null 2>&1 _init_flakey SAVE_MOUNT_OPTIONS="$MOUNT_OPTIONS" MOUNT_OPTIONS="$MOUNT_OPTIONS -o commit=999" _mount_flakey # First fsync, inode has BTRFS_INODE_NEEDS_FULL_SYNC flag set. $XFS_IO_PROG -f -c "pwrite -S 0x01 -b 4096 0 4096" -c "fsync" \ $SCRATCH_MNT/foo | _filter_xfs_io # For any of the following fsync calls, inode doesn't have the flag # BTRFS_INODE_NEEDS_FULL_SYNC set. for ((i = 1; i <= 500; i++)); do OFFSET=$((4096 * i)) LEN=4096 $XFS_IO_PROG -c "pwrite -S 0x01 $OFFSET $LEN" -c "fsync" \ $SCRATCH_MNT/foo | _filter_xfs_io done # Commit transaction and bump next transaction's id (to 7). sync # Truncate will set the BTRFS_INODE_NEEDS_FULL_SYNC flag in the btrfs's # inode runtime flags. $XFS_IO_PROG -c "truncate 2048000" $SCRATCH_MNT/foo # Commit transaction and bump next transaction's id (to 8). sync # Touch 1 extent item from the first leaf and 1 from the last leaf. The leaf # in the middle, containing only file extent items, isn't touched. So the # next fsync, when calling btrfs_search_forward(), won't visit that middle # leaf. First and 3rd leaf have now a generation with value 8, while the # middle leaf remains with a generation with value 6. $XFS_IO_PROG \ -c "pwrite -S 0xee -b 4096 0 4096" \ -c "pwrite -S 0xff -b 4096 2043904 4096" \ -c "fsync" \ $SCRATCH_MNT/foo | _filter_xfs_io _load_flakey_table $FLAKEY_DROP_WRITES md5sum $SCRATCH_MNT/foo | _filter_scratch _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES # During mount, we'll replay the log created by the fsync above, and the file's # md5 digest should be the same we got before the unmount. _mount_flakey md5sum $SCRATCH_MNT/foo | _filter_scratch _unmount_flakey MOUNT_OPTIONS="$SAVE_MOUNT_OPTIONS" status=0 exit Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: ensure tmpfile inode is always persisted with link count of 0Filipe Manana
If we open a file with O_TMPFILE, don't do any further operation on it (so that the inode item isn't updated) and then force a transaction commit, we get a persisted inode item with a link count of 1, and not 0 as it should be. Steps to reproduce it (requires a modern xfs_io with -T support): $ mkfs.btrfs -f /dev/sdd $ mount -o /dev/sdd /mnt $ xfs_io -T /mnt & $ sync Then btrfs-debug-tree shows the inode item with a link count of 1: $ btrfs-debug-tree /dev/sdd (...) fs tree key (FS_TREE ROOT_ITEM 0) leaf 29556736 items 4 free space 15851 generation 6 owner 5 fs uuid f164d01b-1b92-481d-a4e4-435fb0f843d0 chunk uuid 0e3d0e56-bcca-4a1c-aa5f-cec2c6f4f7a6 item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 inode generation 3 transid 6 size 0 block group 0 mode 40755 links 1 item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 inode ref index 0 namelen 2 name: .. item 2 key (257 INODE_ITEM 0) itemoff 15951 itemsize 160 inode generation 6 transid 6 size 0 block group 0 mode 100600 links 1 item 3 key (ORPHAN ORPHAN_ITEM 257) itemoff 15951 itemsize 0 orphan item checksum tree key (CSUM_TREE ROOT_ITEM 0) (...) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: race free update of commit root for ro snapshotsFilipe Manana
This is a better solution for the problem addressed in the following commit: Btrfs: update commit root on snapshot creation after orphan cleanup (3821f348889e506efbd268cc8149e0ebfa47c4e5) The previous solution wasn't the best because of 2 reasons: 1) It added another full transaction commit, which is more expensive than just swapping the commit root with the root; 2) If a reboot happened after the first transaction commit (the one that creates the snapshot) and before the second transaction commit, then we would end up with the same problem if a send using that snapshot was requested before the first transaction commit after the reboot. This change addresses those 2 issues. The second issue is addressed by switching the commit root in the dentry lookup VFS callback, which is also called by the snapshot/subvol creation ioctl and performs orphan cleanup if needed. Like the vfs, the ioctl locks the parent inode too, preventing race issues between a dentry lookup and snapshot creation. Cc: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: fix regression of btrfs device replaceLiu Bo
Commit 49c6f736f34f901117c20960ebd7d5e60f12fcac( btrfs: dev replace should replace the sysfs entry) added the missing sysfs entry in the process of device replace, but didn't take missing devices into account, so now we have BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffffa0268551>] btrfs_kobj_rm_device+0x21/0x40 [btrfs] ... To reproduce it, 1. mkfs.btrfs -f disk1 disk2 2. mkfs.ext4 disk1 3. mount disk2 /mnt -odegraded 4. btrfs replace start -B 1 disk3 /mnt -------------------------- This fixes the problem. Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21gpio-lynxpoint: enable input sensing in resumeMathias Nyman
It appears that input sensing bit might be reset during suspend/resume. Set input sensing again for all requested gpios in resume Tested-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-21gpio: move GPIOD flags outside #ifdefLinus Walleij
The GPIOD flags are defined inside the #ifdef CONFIG_GPIOLIB switch, making the gpiolib stubs fail if these flags are used by a consumer. This is not correct: the stubs should compile fine without GPIOLIB. Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-21pinctrl: qcom: apq8064: Correct interrupts in exampleBjorn Andersson
The example in the binding document indicates that interrupt 32 is used for the TLMM summary IRQ. Correct this to reduce the confusion. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-21pinctrl: exynos: Lock GPIOs as interrupts when used as EINTsTomasz Figa
Currently after configuring a GPIO pin as an interrupt related pinmux registers are changed, but there is no protection from calling gpio_direction_*() in a badly written driver, which would cause the same pinmux register to be reconfigured for regular input/output and this disabling interrupt capability of the pin. This patch addresses this issue by moving pinmux reconfiguration to .irq_{request,release}_resources() callback of irq_chip and calling gpio_lock_as_irq() helper to prevent reconfiguration of pin direction. Setting up a GPIO interrupt on Samsung SoCs is a two-step operation - in addition to trigger configuration in a dedicated register, the pinmux must be also reconfigured to GPIO interrupt, which is a different function than normal GPIO input, although I/O-wise they both behave in the same way and gpio_get_value() can be used on a pin configured as IRQ as well. Such design implies subtleties such as gpio_direction_input() not having to fail if a pin is already configured as an interrupt nor change the configuration to normal input. But the FLAG_USED_AS_IRQ set in gpiolib by gpio_lock_as_irq() is only used to check that gpio_direction_output() is not called, it's not used to prevent gpio_direction_input() to be called. So this is not a complete solution for Samsung SoCs but it's definitely a move in the right direction. Signed-off-by: Tomasz Figa <t.figa@samsung.com> [javier: use request resources instead of startup and expand commit message] Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-21can: flexcan: handle state passive -> warning transitionSebastian Andrzej Siewior
Once the CAN-bus is open and a packet is sent, the controller switches into the PASSIVE state. Once the BUS is closed again it goes the back err-warning. The TX error counter goes 0 -> 0x80 -> 0x7f. This patch makes sure that the user learns about this state chang (CAN_STATE_ERROR_WARNING => CAN_STATE_ERROR_PASSIVE) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Matthias Klein <matthias.klein@optimeas.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-08-21can: flexcan: Disable error interrupt when bus error reporting is disabledAlexander Stein
In case we don't have FLEXCAN_HAS_BROKEN_ERR_STATE and the user set CAN_CTRLMODE_BERR_REPORTING once it can not be unset again until reboot. So in case neither hardware nor user wants the error interrupt disable the bit. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-08-21can: c_can: checking IS_ERR() instead of NULLDan Carpenter
devm_ioremap() returns NULL on error, not an ERR_PTR(). Fixes: 33cf75656923 ('can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-08-21can: sja1000: Validate initialization state in start methodMirza Krak
When sja1000 is not compiled as module the SJA1000 chip is only initialized during device registration on kernel boot. Should the chip get a hardware reset there is no way to reinitialize it without re- booting the Linux kernel. This patch adds a check in sja1000_start if the chip is initialized, if not we initialize it. Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-08-21microblaze: Wire-up memfd_create syscallMichal Simek
Add new memfd_create syscall. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-08-21microblaze: Wire-up getrandom syscallMichal Simek
Add new getrandom syscall. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-08-21microblaze: Wire-up seccomp syscallMichal Simek
Add new seccomp syscall. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-08-20Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Most important fixes in this set include three SMB3 fixes for stable (including fix for possible kernel oops), and a workaround to allow writes to Mac servers (only cifs dialect, not more current SMB2.1, worked to Mac servers). Also fallocate support added, and lease fix from Jeff" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: [SMB3] Enable fallocate -z support for SMB3 mounts enable fallocate punch hole ("fallocate -p") for SMB3 Incorrect error returned on setting file compressed on SMB2 CIFS: Fix wrong directory attributes after rename CIFS: Fix SMB2 readdir error handling [CIFS] Possible null ptr deref in SMB2_tcon [CIFS] Workaround MacOS server problem with SMB2.1 write response cifs: handle lease F_UNLCK requests properly Cleanup sparse file support by creating worker function for it Add sparse file support to SMB2/SMB3 mounts Add missing definitions for CIFS File System Attributes cifs: remove unused function cifs_oplock_break_wait
2014-08-20Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull filesystem fixes from Jan Kara: "udf, isofs, and ext3 bug fixes" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext3: Count internal journal as bsddf overhead in ext3_statfs isofs: Fix unbounded recursion when processing relocated directories udf: avoid unneeded up_write when fail to add entry in ->symlink
2014-08-20Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver revert from Matthew Garrett: "This clearly shouldn't have been merged. No excuse on my part" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: Revert "platform/x86/toshiba-apci.c possible bad if test?"
2014-08-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Reverting a 3.16 patch, fixing two bugs in device assignment (one has a CVE), and fixing some problems introduced during the merge window (the CMA bug came in via Andrew, the x86 ones via yours truly)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: virt/kvm/assigned-dev.c: Set 'dev->irq_source_id' to '-1' after free it Revert "KVM: x86: Increase the number of fixed MTRR regs to 10" KVM: x86: do not check CS.DPL against RPL during task switch KVM: x86: Avoid emulating instructions on #UD mistakenly PC, KVM, CMA: Fix regression caused by wrong get_order() use kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)
2014-08-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These are the two bug fixes I mentioned in the final merge window pull. One is a reversed logic check in the device busy tests which can cause a nasty hang and another crash seen in the new SCSI pool support if the use count ever goes to zero" [ The device busy test already got merged from a patch earlier, so is now duplicated. ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] save command pool address of Scsi_Host [SCSI] fix qemu boot hang problem
2014-08-20usb: gadget: remove $(PWD) in ccflags-yPhilippe Reynes
The variable $(PWD) is useless, and it may break the compilation. For example, it breaks the kernel compilation when it's done with buildroot : /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/bin/ccache /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -Wp,-MD,drivers/usb/gadget/legacy/.hid.o.d -nostdinc -isystem /home/trem/Codes/armadeus/armadeus/buildroot/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.7.3/include -I./arch/arm/include -Iarch/arm/include/generated -Iinclude -I./arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-dwarf2-cfi-asm -mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp -funwind-tables -marm -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm9tdmi -msoft-float -Uarm -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fno-stack-protector -Wno-unused-but-set-variable -fomit-frame-pointer -fno-var-tracking-assignments -g -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -DCC_HAVE_ASM_GOTO -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/ -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/udc/ -I/home/trem/Codes/armadeus/armadeus/buildroot/drivers/usb/gadget/function/ -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(hid)" -D"KBUILD_MODNAME=KBUILD_STR(g_hid)" -c -o drivers/usb/gadget/legacy/hid.o drivers/usb/gadget/legacy/hid.c drivers/usb/gadget/epautoconf.c:23:26: erreur fatale: gadget_chips.h : Aucun fichier ou dossier de ce type This compilation line include : ..../buildroot/driver/usb/gadget but the real path is : ..../buildroot/output/build/linux-3.17-rc1/driver/usb/gadget Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20spi/rockchip: fixup incorrect dma direction settingAddy Ke
Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-20spi/pxa2xx: Add ACPI ID for Intel BraswellAlan Cox
The SPI host controller is the same as used in Baytrail, only the ACPI ID is different so add this new ID to the list. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-08-20Revert "platform/x86/toshiba-apci.c possible bad if test?"Matthew Garrett
This reverts commit bdc3ae7221213963f438faeaa69c8b4a2195f491. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-20usb: pch_udc: usb gadget device support for Intel Quark X1000Bryan O'Donoghue
This patch is to enable the USB gadget device for Intel Quark X1000 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by: Bing Niu <bing.niu@intel.com> Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20mfd: ab8500-core: Use 'ifdef' for config optionsFabio Estevam
The config symbol 'CONFIG_DEBUG_FS' should be protected by a 'ifdef' instead of a plain 'if'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-20mfd: htc-i2cpld: Fix %d confusingly prefixed with 0x in format stringHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-20mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format stringHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-20pwm-backlight: Fix bogus request for GPIO#0 when instantiated from DTLothar Waßmann
commit 257462dbf3ed ("pwm-backlight: switch to gpiod interface") introduced a regression leading to acquiring a bogus GPIO-0 when configured from DT without an 'enable-gpios' property. The driver will happily accept the 0 initialized 'enable_gpio' member of the struct platform_pwm_backlight_data as valid gpio number, and request this GPIO as enable pin. In case of multiple driver instances, the second will fail to register with the error message: pwm-backlight backlight1.23: failed to request GPIO#0: -16 Fix this by setting enable_gpio in the pdata struct to -EINVAL. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 22:21:45 +0000