Age | Commit message (Collapse) | Author |
|
The current comments in d_invalidate about what and why it is doing
what it is doing are wildly off-base. Which is not surprising as
the comments date back to last minute bug fix of the 2.2 kernel.
The big fat lie of a comment said: If it's a directory, we can't drop
it for fear of somebody re-populating it with children (even though
dropping it would make it unreachable from that root, we still might
repopulate it if it was a working directory or similar).
[AV] What we really need to avoid is multiple dentry aliases of the
same directory inode; on all filesystems that have ->d_revalidate()
we either declare all positive dentries always valid (and thus never
fed to d_invalidate()) or use d_materialise_unique() and/or d_splice_alias(),
which take care of alias prevention.
The current rules are:
- To prevent mount point leaks dentries that are mount points or that
have childrent that are mount points may not be be unhashed.
- All dentries may be unhashed.
- Directories may be rehashed with d_materialise_unique
check_submounts_and_drop implements this already for well maintained
remote filesystems so implement the current rules in d_invalidate
by just calling check_submounts_and_drop.
The one difference between d_invalidate and check_submounts_and_drop
is that d_invalidate must respect it when a d_revalidate method has
earlier called d_drop so preserve the d_unhashed check in
d_invalidate.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
d_drop or check_submounts_and_drop called from d_revalidate can result
in renamed directories with child dentries being unhashed. These
renamed and drop directory dentries can be rehashed after
d_materialise_unique uses d_find_alias to find them.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
On final mntput() we want fs shutdown to happen before return to
userland; however, the only case where we want it happen right
there (i.e. where task_work_add won't do) is MNT_INTERNAL victim.
Those have to be fully synchronous - failure halfway through module
init might count on having vfsmount killed right there. Fortunately,
final mntput on MNT_INTERNAL vfsmounts happens on shallow stack.
So we handle those synchronously and do an analog of delayed fput
logics for everything else.
As the result, we are guaranteed that fs shutdown will always happen
on shallow stack.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Biederman's umount-on-rmdir series changes d_invalidate() to sumarily remove
mounts under the passed in dentry regardless of whether they are busy
or not. So calling this in fs/autofs4/expire.c:autofs4_tree_busy() is
definitely the wrong thing to do becuase it will silently umount entries
instead of just cleaning stale dentrys.
But this call shouldn't be needed and testing shows that automounting
continues to function without it.
As Al Viro correctly surmises the original intent of the call was to
perform what shrink_dcache_parent() does.
If at some time in the future I see stale dentries accumulating
following failed mounts I'll revisit the issue and possibly add a
shrink_dcache_parent() call if needed.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* external dentry names get a small structure prepended to them
(struct external_name).
* it contains an atomic refcount, matching the number of struct dentry
instances that have ->d_name.name pointing to that external name. The
first thing free_dentry() does is decrementing refcount of external name,
so the instances that are between the call of free_dentry() and
RCU-delayed actual freeing do not contribute.
* __d_move(x, y, false) makes the name of x equal to the name of y,
external or not. If y has an external name, extra reference is grabbed
and put into x->d_name.name. If x used to have an external name, the
reference to the old name is dropped and, should it reach zero, freeing
is scheduled via kfree_rcu().
* free_dentry() in dentry with external name decrements the refcount of
that name and, should it reach zero, does RCU-delayed call that will
free both the dentry and external name. Otherwise it does what it
used to do, except that __d_free() doesn't even look at ->d_name.name;
it simply frees the dentry.
All non-RCU accesses to dentry external name are safe wrt freeing since they
all should happen before free_dentry() is called. RCU accesses might run
into a dentry seen by free_dentry() or into an old name that got already
dropped by __d_move(); however, in both cases dentry must have been
alive and refer to that name at some point after we'd done rcu_read_lock(),
which means that any freeing must be still pending.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Claudiu Manoil says:
====================
gianfar: ARM port driver updates (1/2)
This is the first round of driver portability fixes and clean-up
with the main purpose to make gianfar portable on ARM, for the ARM
based SoC that integrates the eTSEC ethernet controller - "ls1021a".
The patches primarily address compile time errors, when compiling
gianfar on ARM. They replace PPC specific functions and macros
with architecture independent ones, solve arch specific header
inclusions, guard code that relates to PPC only, and even address
some simple endianess issues (see MAC address setup patch).
The patches addressing the bulk of remaining endianess issues,
like handling DMA fields (BD and FCB), will follow with the second
round.
====================
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace PPC specific eieio() with arch independent wmb()
for other architectures, i.e. ARM.
The eieio() macro is not defined on ARM and generates
build error.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use arch independent code to replace the powerpc dependent
spin_event_timeout() from gfar_halt_nodisable().
Added GRS/GTS read accessors to clean-up the implementation
of gfar_halt_nodisable().
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the 32-bit memory access that is not endian safe,
i.e. not giving the desired byte layout for a LE CPU:
tempval = *((u32 *) (tmpbuf + 4)), where 'char tmpbuf[]'.
Get rid of rendundant local vars (tmpbuf[] and idx) and
forced casts. Cleanup comments.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This excludes the PPC specific instructions for PPC based SoC
(MPC85xx family) version identification from ARM builds.
The PPC specific macro mfspr() from asm/reg.h is not defined
by the ARM architecture.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include linux/of_address.h for of_iomap() and linux/of_irq.h
for irq_of_parse_and_map().
This wasn't an issue for PPC, because these were implicitly
included from asm/prom.h (via linux/of.h) for PPC builds only.
ARM builds need these includes explicitly.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
spin_event_timeout() is PPC dependent, use an arch independent
equivalent instead.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in_be32()/out_be32() are not defined by ARM.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UCC specific code included in fsl_pq_mdio.c (with
function calls from asm/ucc.h) is already guarded
by these config options, so this ARM build fix only
provides consistency with the rest UCC specific code.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
no secid argument in netlbl_cfg_unlbl_static_del
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.18
A few small fixes, mostly small although a few really nasty ones like
the interaction between GPIO 0 and simple-card.
|
|
Pull networking updates from David Miller:
"Most notable changes in here:
1) By far the biggest accomplishment, thanks to a large range of
contributors, is the addition of multi-send for transmit. This is
the result of discussions back in Chicago, and the hard work of
several individuals.
Now, when the ->ndo_start_xmit() method of a driver sees
skb->xmit_more as true, it can choose to defer the doorbell
telling the driver to start processing the new TX queue entires.
skb->xmit_more means that the generic networking is guaranteed to
call the driver immediately with another SKB to send.
There is logic added to the qdisc layer to dequeue multiple
packets at a time, and the handling mis-predicted offloads in
software is now done with no locks held.
Finally, pktgen is extended to have a "burst" parameter that can
be used to test a multi-send implementation.
Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
virtio_net
Adding support is almost trivial, so export more drivers to
support this optimization soon.
I want to thank, in no particular or implied order, Jesper
Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
David Tat, Hannes Frederic Sowa, and Rusty Russell.
2) PTP and timestamping support in bnx2x, from Michal Kalderon.
3) Allow adjusting the rx_copybreak threshold for a driver via
ethtool, and add rx_copybreak support to enic driver. From
Govindarajulu Varadarajan.
4) Significant enhancements to the generic PHY layer and the bcm7xxx
driver in particular (EEE support, auto power down, etc.) from
Florian Fainelli.
5) Allow raw buffers to be used for flow dissection, allowing drivers
to determine the optimal "linear pull" size for devices that DMA
into pools of pages. The objective is to get exactly the
necessary amount of headers into the linear SKB area pre-pulled,
but no more. The new interface drivers use is eth_get_headlen().
From WANG Cong, with driver conversions (several had their own
by-hand duplicated implementations) by Alexander Duyck and Eric
Dumazet.
6) Support checksumming more smoothly and efficiently for
encapsulations, and add "foo over UDP" facility. From Tom
Herbert.
7) Add Broadcom SF2 switch driver to DSA layer, from Florian
Fainelli.
8) eBPF now can load programs via a system call and has an extensive
testsuite. Alexei Starovoitov and Daniel Borkmann.
9) Major overhaul of the packet scheduler to use RCU in several major
areas such as the classifiers and rate estimators. From John
Fastabend.
10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
Duyck.
11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
Dumazet.
12) Add Datacenter TCP congestion control algorithm support, From
Florian Westphal.
13) Reorganize sk_buff so that __copy_skb_header() is significantly
faster. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
netlabel: directly return netlbl_unlabel_genl_init()
net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
net: description of dma_cookie cause make xmldocs warning
cxgb4: clean up a type issue
cxgb4: potential shift wrapping bug
i40e: skb->xmit_more support
net: fs_enet: Add NAPI TX
net: fs_enet: Remove non NAPI RX
r8169:add support for RTL8168EP
net_sched: copy exts->type in tcf_exts_change()
wimax: convert printk to pr_foo()
af_unix: remove 0 assignment on static
ipv6: Do not warn for informational ICMP messages, regardless of type.
Update Intel Ethernet Driver maintainers list
bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
tipc: fix bug in multicast congestion handling
net: better IFF_XMIT_DST_RELEASE support
net/mlx4_en: remove NETDEV_TX_BUSY
3c59x: fix bad split of cpu_to_le32(pci_map_single())
net: bcmgenet: fix Tx ring priority programming
...
|
|
If afu_read() returned due to a signal or the AFU file descriptor being
opened non-blocking it would not call finish_wait() before returning,
which could lead to a crash later when something else wakes up the wait
queue.
This patch restructures the wait logic to ensure that the cleanup is
done correctly.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The pending nested sleep debugging triggered on the potential stale
TASK_INTERRUPTIBLE in this code.
While there, fix the loop such that we won't revert to a while(1)
yield() 'spin' loop if we ever get a spurious wakeup.
And fix the actual issue by properly terminating the 'wait' loop by
setting TASK_RUNNING.
Link: http://lkml.kernel.org/p/20141008165110.GA14547@worktop.programming.kicks-ass.net
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Using {set,clear}_bit is more consistent than shifting and masking.
No functional change.
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
If two threads call bitmap_unplug at the same time, then
one might schedule all the writes, and the other might
decide that it doesn't need to wait. But really it does.
It rarely hurts to wait when it isn't absolutely necessary,
and the current code doesn't really focus on 'absolutely necessary'
anyway. So just wait always.
This can potentially lead to data corruption if a crash happens
at an awkward time and data was written before the bitmap was
updated. It is very unlikely, but this should go to -stable
just to be safe. Appropriate for any -stable.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel.org (please delay until 3.18 is released)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM64 SoC changes from Arnd Bergmann:
"Starting with 3.18, we are merging SoC-specific changes for arm64
through the arm-soc tree, like we have been doing for arm32.
This time, there is only one set of changes, adding support for the
Cavium "Thunder" Soc family. Since the changes are relatively small,
this includes Kconfig, defconfig and DT changes.
If all goes well, we will never require adding actual C source code
for platform support in arm64, given that the architecture is more
clearly defined and we have moved out a lot of the platform specifics
into device drivers for arm32 already"
* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64, defconfig: Enable Cavium Thunder SoC in defconfig
arm64, thunder: Add Kconfig option for Cavium Thunder SoC Family
arm64, thunder: Document devicetree bindings for Cavium Thunder SoC
arm64, thunder: Add initial dts for Cavium Thunder SoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig changes from Arnd Bergmann:
"This is a collection of the various changes to defconfig files, most
importantly enabling some additional platforms in the
multi_v7_defconfig file"
* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
ARM: configs: fix duplicate entry in multi_v7
ARM: multi_v7_defconfig: add missing Tegra options
ARM: bcm2835: enable USB_DWC2_HOST in defconfig
ARM: meson: update multi_v7_defconfig
ARM: multi_v7_defconfig: Enable Mediatek platform
ARM: qcom: Update defconfig
ARM: mvebu: add gpio-fan to mvebu_v7_defconfig
ARM: mvebu: add LED class support built-in in mvebu_v7_defconfig
ARM: shmobile: Enable r8a7794 SoC in shmobile_defconfig
ARM: LPC32xx: defconfig update
ARM: configs: Enable cpufreq-cpu0 for multi_v7_defconfig
ARM: configs: Remove REGULATOR_VIRTUAL_CONSUMER from defconfigs
ARM: tegra: enable Atmel touchpad in defconfig
ARM: at91: sama5: update defconfig
ARM: at91: at91sam9rl: update defconfig
ARM: at91: at91sam9g45: update defconfig
ARM: at91: at91sam9263: update defconfig
ARM: at91: at91sam9261_9g10: update defconfig
ARM: at91: at91sam9260_9g20: update defconfig
ARM: at91: at91_dt: update defconfig
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are changes for drivers that are intimately tied to some SoC and
for some reason could not get merged through the respective subsystem
maintainer tree.
Most of the new code is for the Keystone Navigator driver, which is
new base support that is going to be needed for their hardware
accelerated network driver and other units.
Most of the commits are for moving old code around from at91 and omap
for things that are done in device drivers nowadays.
- at91: move reset, poweroff, memory and clocksource code into
drivers directories
- socfpga: add edac driver (through arm-soc, as requested by Boris)
- omap: move omap-intc code to drivers/irqchip
- sunxi: added an RTC driver for sun6i
- omap: mailbox driver related changes
- keystone: support for the "Navigator" component
- versatile: new reboot, led and soc drivers"
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
bus: arm-ccn: Fix spurious warning message
leds: add device tree bindings for register bit LEDs
soc: add driver for the ARM RealView
power: reset: driver for the Versatile syscon reboot
leds: add a driver for syscon-based LEDs
drivers/soc: ti: fix build break with modules
MAINTAINERS: Add Keystone Multicore Navigator drivers entry
soc: ti: add Keystone Navigator DMA support
Documentation: dt: soc: add Keystone Navigator DMA bindings
soc: ti: add Keystone Navigator QMSS driver
Documentation: dt: soc: add Keystone Navigator QMSS bindings
rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
rtc: sun6i: Add sun6i RTC driver
irqchip: omap-intc: remove unnecessary comments
irqchip: omap-intc: correct maximum number or MIR registers
irqchip: omap-intc: enable TURBO idle mode
irqchip: omap-intc: enable IP protection
irqchip: omap-intc: remove unnecesary of_address_to_resource() call
irqchip: omap-intc: comment style cleanup
irqchip: omap-intc: minor improvement to omap_irq_pending()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, this is the largest branch, though this time a little under
half of the total changes with 307 individual non-merge changesets.
The largest changes are the addition of new machines, in particular
the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
for the old i.MX1 platform.
Other changes include
- at91: various sam9 and sama5 updates
- exynos: much extended Peach Pi/Pit (Chromebook 2) support
- keystone: new peripherals
- meson: added DT for meson6 SoC
- mvebu: new device support for Armada 370/375
- qcom: improved support for IPQ8064 and MSM8x60
- rockchip: much improved support for rk3288
- shmobile: lots of updates all over the place
- sunxi: dts license change
- sunxi: more a23 device support
- vexpress: CLCD DT description"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits)
ARM: DTS: meson: update DTSI to add watchdog node
ARM: dts: keystone-k2l: fix mdio io start address
ARM: dts: keystone-k2e: fix mdio io start address
ARM: dts: keystone-k2e: update usb1 node for dma properties
ARM: dts: keystone: fix io range for usb_phy0
Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
Revert "ARM: dts: hix5hd2: add wdg node"
ARM: dts: add rk3288 i2s controller
ARM: vexpress: Add CLCD Device Tree properties
ARM: bcm2835: add I2S pinctrl to device tree
ARM: meson: documentation: add bindings documentation
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
ARM: dts: mt6589: Change compatible string for GIC
ARM: dts: mediatek: Add compatible property for aquaris5
ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
ARM: dts: mt6589: Fix typo in GIC unit address
ARM: dts: Build dtb for Mediatek board
ARM: dts: keystone: fix bindings for pcie and usb clock nodes
ARM: dts: keystone: k2l: Fix chip selects for SPI devices
ARM: dts: keystone: add dsp gpio controllers nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Arnd Bergmann:
"New and updated SoC support. Among the things new for this release
are:
- at91: Added support for the new SAMA5D4 SoC, following the earlier
SAMA5D3
- bcm: Added support for BCM63XX family of DSL SoCs
- hisi: Added support for HiP04 server-class SoC
- meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
- shmobile: added support for new r8a7794 (R-Car E2) automotive SoC
Noteworthy changes to existing SoC support are:
- imx: convert i.MX1 to device tree
- omap: lots of power management work
- omap: base support to enable moving to standard UART driver
- shmobile: lots of progress for multiplatform support, still
ongoing"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
ARM: hisi: depend on ARCH_MULTI_V7
CNS3xxx: Fix debug UART.
ARM: at91: fix nommu build regression
ARM: meson: add basic support for MesonX SoCs
ARM: meson: debug: add debug UART for earlyprintk support
irq: Export handle_fasteoi_irq
ARM: mediatek: Add earlyprintk support for mt6589
ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
ARM: debug: fix alphanumerical order on debug uarts
ARM: at91: document Atmel SMART compatibles
ARM: at91: add sama5d4 support to sama5_defconfig
ARM: at91: dt: add device tree file for SAMA5D4ek board
ARM: at91: dt: add device tree file for SAMA5D4 SoC
ARM: at91: SAMA5D4 SoC detection code and low level routines
ARM: at91: introduce basic SAMA5D4 support
clk: at91: add a driver for the h32mx clock
ARM: pxa3xx: provide specific platform_devices for all ssp ports
ARM: pxa: ssp: provide platform_device_id for PXA3xx
ARM: OMAP4+: Remove static iotable mappings for SRAM
ARM: OMAP4+: Move SRAM data to DT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"This time around, the cleanup branch contains mostly code removal. A
number of board files for at91, imx and msm have become obsolete
because of the DT conversion and are now ready to be removed. The
OMAP platform has traditionally had its own DMA engine abstraction and
as this is being phased out, a lot of the original code is now unused
and can be removed as well.
S3C24xx can be simplified now that the restart code is a proper device
driver.
Finally, a number of cleanups in shmobile are done to prepare for the
addition of new code in other branches"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91: Remove the support for the RSI EWS board
arm: mach-omap2: Convert pr_warning to pr_warn
ARM: OMAP: Remove unused pieces of legacy DMA API
ARM: at91: remove board file for Acme Systems Fox G20
ARM: orion5x: Convert pr_warning to pr_warn
ARM: S3C24XX: remove separate restart code
ARM: EXYNOS: Do not calculate boot address twice
ARM: sunxi: Remove sun4i reboot code from mach directory
ARM: imx: Remove mach-mxt_td60 board file
ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
ARM: shmobile: r8a7740: Clean up pm domain table
ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
ARM: shmobile: sh7372: Make domain_devices[] static __initdata
ARM: shmobile: mackerel: Make domain_devices[] static __initdata
clocksource: tcb_clksrc: sanitize IRQ request
ARM: at91/tclib: mask interruptions at shutdown and probe
ARM: at91/tclib: move initialization from alloc to probe
ARM: at91/tclib: prefer using of devm_* functions
ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
ARM: shmobile: r8a7791 is now called "R-Car M2-W"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
"These are bug fixes for harmless problems that were not important
enough to get fixed in 3.17. The majority of these are OMAP specific,
but there are also a couple for Marvell mvebu, cns3xxx, and others, as
well as some updates for the MAINTAINERS file.
In particular, Robert Jarzmik and Daniel Mack now volunteered to help
out maintaining the PXA platform, Krzysztof Halasa took over the
cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
meson platform, and Matthias Brugger is now listed for the mediatek
platform he recently contributed"
* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
MAINTAINERS: update Shawn's email address
MAINTAINERS: condense some Tegra related entries
MAINTAINERS: add Alexandre Courbot for Tegra
MAINTAINERS: CNS3xxx and IXP4xx update.
MAINTAINERS: Add maintainers entry for Mediatek SoCs
arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500
MAINTAINERS: add a third maintainer to mach-bcm
CNS3xxx: Fix PCIe read size limit.
CNS3xxx: Fix logical PCIe topology.
CNS3xxx: Fix debug UART.
MAINTAINERS: Add entry for the Amlogic MesonX SoCs
MAINTAINERS: update ARM pxa maintainers
ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
ARM: Kirkwood: Fix DT based DSA.
ARM: OMAP2+: make of_device_ids const
ARM: omap2: make arrays containing machine compatible strings const
ARM: LPC32xx: Fix reset function
ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
...
|
|
You cannot call pnfs_put_lseg_async() more than once per lseg, so it
is really an inappropriate way to deal with a refcount issue.
Instead, replace it with a function that decrements the refcount, and
puts the final 'free' operation (which is incompatible with locks) on
the workqueue.
Cc: Weston Andros Adamson <dros@primarydata.com>
Fixes: e6cf82d1830f: pnfs: add pnfs_put_lseg_async
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
|
|
No need to store netlbl_unlabel_genl_init result and test it before returning.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two helpers so that drivers do not have to care of BQL being
available or not.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jim Davis <jim.epost@gmail.com>
Fixes: 29d40c903247 ("net/mlx4_en: Use prefetch in tx path")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 7bced397510ab569d31de4c70b39e13355046387,
dma_cookie was removed from struct skbuff.
But the description of dma_cookie still exist.
So the "make xmldocs" output following warning.
Warning(.//include/linux/skbuff.h:609): Excess struct/union
/enum/typedef member 'dma_cookie' description in 'sk_buff'
Remove description of dma_cookie fix the symptom.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tx_desc struct holds 8 __be64 values. The original code in
ring_tx_db() took a tx_desc pointer then casted it to an int pointer and
then casted it to a u64 pointer. It was confusing and triggered some
static checker warnings.
I have changed the cxgb_pio_copy() function to only take tx_desc
pointers. This isn't really a loss of flexibility because anything else
was buggy to begin with.
I also removed the casting on the destination pointer since that was
unnecessary and a bit messy.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"cntxt_id" is an unsigned int but "udb" is a u64 so there is a potential
shift wrapping bug here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sb_edac controls a large number of different PCI functions. Rather
than registering as a normal PCI driver for all of them, it
registers for just one so that it gets probed and, at probe time, it
looks for all the others.
Coincidentally, the device it registers for also contains the SMBUS
registers, so the PCI core will refuse to probe both sb_edac and a
future iMC SMBUS driver. The drivers don't actually conflict, so
just change sb_edac's device table to probe a different device.
An alternative fix would be to merge the two drivers, but sb_edac
will also refuse to load on non-ECC systems, whereas i2c_imc would
still be useful without ECC.
The only user-visible change should be that sb_edac appears to bind
a different device.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rui Wang <ruiv.wang@gmail.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The i2c_imc driver will use two of them, and moving only part of
the list seems messier.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but
EDAC doesn't know about this and returns and INTERNAL ERROR when the
channel is greater than NUM_CHANNELS:
kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f
kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0
kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4)
kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0)
This commit changes sb_edac to forward a channel of -1 to EDAC if the
channel is not specified. edac_mc_handle_error() sets the channel to -1
internally after the error message anyway, so this commit should have no
effect other than avoiding the INTERNAL ERROR message when the channel
is not specified.
Signed-off-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Support skb->xmit_more in i40e is straightforward : we need to move
around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped()
before taking the decision to not kick the NIC.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Christophe Leroy says:
====================
net: fs_enet: Remove non NAPI RX and add NAPI for TX
When using a MPC8xx as a router, 'perf' shows a significant time spent in
fs_enet_interrupt() and fs_enet_start_xmit().
'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent
between spin_unlock_irqrestore() and the following instruction, hence in
interrupt handling. This is due to the TX complete interrupt that fires after
each transmitted packet.
This patchset first remove all non NAPI handling as NAPI has become the only
mode for RX, then adds NAPI for handling TX complete.
This improves NAT TCP throughput by 21% on MPC885 with FEC.
Tested on MPC885 with FEC.
[PATCH 1/2] net: fs_enet: Remove non NAPI RX
[PATCH 2/2] net: fs_enet: Add NAPI TX
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using a MPC8xx as a router, 'perf' shows a significant time spent in
fs_enet_interrupt() and fs_enet_start_xmit().
'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent
between spin_unlock_irqrestore() and the following instruction, hence in
interrupt handling. This is due to the TX complete interrupt that fires after
each transmitted packet.
This patch modifies the handling of TX complete to use NAPI.
With this patch, my NAT router offers a throughput improved by 21%
Original performance:
[root@localhost tmp]# scp toto pgs:/tmp
toto 100% 256MB 2.8MB/s 01:31
Performance with the patch:
[root@localhost tmp]# scp toto pgs:/tmp
toto 100% 256MB 3.4MB/s 01:16
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the probe function, use_napi is inconditionnaly set to 1. This patch removes
all the code which is conditional to !use_napi, and removes use_napi which has
then become useless.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support.
It is a successor chip of RTL8168DP.
For RTL8168EP, the read/write ocp register is via eri channel type 2, so I
move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx()
for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write.
The way of checking dash enable is different with RTL8168DP. I use
r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP,
to check if dash is enabled.
The driver_start() and driver_stop() of RTL8168EP is also different with
RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and
rtl8168ep_driver_xxx for RTL8168EP.
Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not
add firmware code for it.
so I did not add firmware code for it.
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to copy exts->type when committing the change, otherwise
it would be always 0. This is a quick fix for -net and -stable,
for net-next tcf_exts will be removed.
Fixes: commit 33be627159913b094bb578e83 ("net_sched: act: use standard struct list_head")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Accessing do_remount_sb should require global CAP_SYS_ADMIN, but
only one of the two call sites was appropriately protected.
Fixes CVE-2014-7975.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
|
|
Because CCN's cycle counter always runs, it will generate
an interrupt on overflow even if the relevant perf event
was not requested, causing a spurious warning message.
Fixed now by warning on only normal counter unwanted
overflows. Also cleaning the overflow mask at init now,
not to warn on event previously requested by firmware.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
My Freescale email address will be gone shortly. Update my email to be
the Linaro one.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There's little point having specific entries in MAINTAINERS for Tegra
drivers that are already covered by the top-level Tegra architecture
support entry, and maintained by people listed there. Remove the
duplicates.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I'd like to propose Alexandre Courbot as an additional Tegra maintainer.
He's been working on a variety of Tegra-related code for a while, and
is now officially tasked with working on upstream support.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
--
v2:
* Use Alexandre's full name.
* Use a non-NVIDIA email address to avoid Exchange Server patch corruption.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|