summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-03-12Input: wacom - fix physical size calculation for 3rd-gen BambooJason Gerecke
This calculation determines the physical dimensions of the tablet, used later on in calculate_touch_res to obtain the touch sensor resolution. Instead of dividing the logical size by the resolution, the current code performs a multiplication. This doesn't pose a problem for the 3rd-gen Bamboo since the resolution and scale factor happen to be identical, but will produce an incorrect result for other cases. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-12Input: twl4030-vibra - really switch from #if to #ifdefDmitry Torokhov
The commit f3761c0779b62276b5bf84532a81d5dc49bd721f claimed to change #if to #ifdef to avoid compiler warnings when CONFIG_PM_SLEEP is not defined, but failed at that. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-07Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in useJason Gerecke
The message count field uses three bits of storage, not two. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-24Input: twl4030-vibra - use proper guard for PM methodsDmitry Torokhov
On m68k: drivers/input/misc/twl4030-vibra.c:175:5: warning: "CONFIG_PM" is not defined We should use #ifdef instead of #if and also check CONFIG_PM_SLEEP instead of CONFIG_PM. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-24Input: evdev - fix variable initialisationHeiko Stübner
Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-24Input: wacom - add missing LEDS_CLASS to KconfigChris Bagwell
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-24Input: ALPS - fix touchpad detection when buttons are pressedAkio Idehara
ALPS touchpad detection fails if some buttons of ALPS are pressed. The reason is that the "E6" query response byte is different from what is expected. This was tested on a Toshiba Portege R500. Cc: stable <stable@vger.kernel.org> Signed-off-by: Akio Idehara <zbe64533@gmail.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-03Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklistIgor Murzov
From 2d5a38a56453421e82428155f4b00303f3fb19b2 Mon Sep 17 00:00:00 2001 From: Igor Murzov <e-mail@date.by> Date: Wed, 1 Feb 2012 03:11:53 +0400 Subject: [PATCH] Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklist Lenovo Ideapad U455 needs to be in the reset quirk list for its touchpad's proper function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=40672 Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: serio_raw - return proper result when serio_raw_read failsChe-Liang Chiou
serio_raw_read now returns (sometimes partially) successful number of bytes transferred to the caller, and only returns error code to the caller on completely failed transfers. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: document device propertiesHenrik Rydberg
Add a section which defines the input device properties and provides guidelines on how to use them. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chase Douglas <chase.douglas@canonical.com> Reviewed-by: Jussi Pakkanen <jussi.pakkanen@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: twl4030_keypad - fix comment (trivial)Felipe Contreras
And trivial whitespace fixes. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: gpio_keys - fix struct device declared inside parameter listHeiko Stübner
A struct device parameter is used in the enable and disable callbacks to distinguish between different gpio_keys devices. Platforms that don't use these callbacks may not include struct device at all, as seen on arch/arm/mach-s3c2410/mach-n30.c Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-02-01Input: evdev - fix variable initialisationHeiko Stübner
Commit 509f87c5f564 (evdev - do not block waiting for an event if fd is nonblock) created a code path were it was possible to use retval uninitialized. This could lead to the xorg evdev input driver getting corrupt data and refusing to work with log messages like AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success AUO-Pixcir touchscreen: Read error: Success sg060_keys: Read error: Success (for drivers auo-pixcir-ts and gpio-keys). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Input: bcm5974 - set BUTTONPAD propertyJussi Pakkanen
Some bcm5974 trackpads have a physical button beneath the physical surface. This patch sets the property bit so user space applications can detect the trackpad type and act accordingly. Signed-off-by: Jussi Pakkanen <jussi.pakkanen@canonical.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Input: serio_raw - return proper result when serio_raw_write failsDmitry Torokhov
If serio_raw_write was always returning number of bytes successfully sent to serio port and never signalled error condition to the caller. Change it so that for completely failed transfers appropriate error code returned to the caller (partially successful writes still return number of bytes transferred). Reported-by: Che-liang Chiou <clchiou@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Input: serio_raw - really signal HUP upon disconnectDmitry Torokhov
Commit 8c1c10d5706bbb3b41cb4a5578339d67d3eeffc2 attempted to signal POLLHUP | POLLERR condition when polling disconnected device, unfortunately it did not do it quite correctly. Reported-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Input: serio_raw - remove stray semicolonChe-Liang Chiou
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Input: revert some over-zealous conversions to module_platform_driver()Dmitry Torokhov
Recent conversion to module_platform_driver() went a bit too far and converted not only drivers that used platform_driver_register() but also ones using platform_driver_probe(), breaking them in process. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-08Merge branch 'next' into for-linusDmitry Torokhov
2012-01-04Input: tc3589x-keypad - add missing kerneldocNaga Radhesh
This adds two missing kerneldoc entries for the TC3589x keypad driver. Signed-off-by: Naga Radhesh <naga.radheshy@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messagesDmitry Torokhov
Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - convert to threaded IRQDmitry Torokhov
Instead of manually create and handler kernel thread switch to threaded IRQ and let kernel IRQ core manage thread for us. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - drop inline annotationsDmitry Torokhov
Let compiler figure out which ones makes most sense to inline. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: usb1400_ts - add __devinit/__devexit section annotationsDmitry Torokhov
Add __devinit/__devexit sections annotations so parts of code could be discarded after completing driver initialization. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - set driver ownerDmitry Torokhov
So that it has proper symlink to the containing module in sysfs. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - convert to use dev_pm_opsDmitry Torokhov
Instead of using legacy PM interfaces switch to using dev_pm_ops. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: psmouse - make sure we do not use stale methodsDmitry Torokhov
Several protocol initialization routines can fail after they set up psmouse methods, such as reconnect and disconnect. This may lead to these stale methods used with different protocol that they were intended to be used for and may cause unpredictavle behavior and/or crashes. Make sure we start with a clean slate before executing each and every protocol detection and/or initialization routine. Reported-by: Paul Fox <pgf@laptop.org> Acked-by: Tai-hwa Liang <avatar@sentelic.com> Acked-by: Paul Fox <pgf@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: evdev - do not block waiting for an event if fd is nonblockDima Zavin
If there is a full packet in the buffer, and we overflow that buffer right after checking for that condition, it would have been possible for us to block indefinitely (rather, until the next full packet) even if the file was marked as O_NONBLOCK. Cc: Jeff Brown <jeffbrown@android.com> Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: evdev - if no events and non-block, return EAGAIN not 0Dima Zavin
Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: evdev - only allow reading events if a full packet is presentDima Zavin
Without this, it was possible for the reader to get ahead of packet_head. If the input device generated a partial packet *right* after the reader got ahead, then we can get into a situation where the device is marked readable, but read always returns 0 until the next packet is finished (i.e a SYN is generated by the input driver). This situation can also happen if we overflow the buffer while a reader is trying to read an event out. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: add driver for pixcir i2c touchscreensJianchun Bian
This patch adds a driver for PIXCIR's I2C connected touchscreens. Signed-off-by: Jianchun <jcbian@pixcir.com.cn> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: samsung-keypad - implement runtime power management supportMark Brown
When runtime power management is enabled put the Samsung keypad driver into suspend mode with wakeups disabled whenever the device is open but a key is not actually been pressed. As well as saving a trivial amount of power this will support the use of SoC wide idle modes which put the entire device into a retention mode and use explicit wakeup sources to exit. Since not all of the interrupt controllers used with the driver support set_irq_wake() (though they all do the right thing) and there's a nasty WARN() when we disable wake after failing to enable it keep track of the current wake status from runtime PM and only disable wake if we managed to enable it; I'm not entirely sure why this doesn't affect the existing uses of the API in the driver. System suspend is unaffected as the driver core will runtime resume any suspended devices prior to system suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Conflicts: drivers/input/keyboard/samsung-keypad.c
2011-12-30Input: tegra-kbc - report wakeup key for some platformsRakesh Iyer
Tegra kbc cannot detect exact keypress causing wakeup in interrupt mode. Allow wakeup keypress to be reported for certain platforms. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: tegra-kbc - add device tree bindingsOlof Johansson
This adds a simple device tree binding to the tegra keyboard controller. Also, mark the default keymap as __devinitdata since it is not referenced after boot. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-29Input: sentelic - fix retrieving number of buttonsTai-hwa Liang
Fixing wrong register offset which is used to retrieve the number of buttons attached to the hardware. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-27Input: add driver for AUO In-Cell touchscreens using pixcir ICsHeiko Stübner
Some displays from AUO have a so called in-cell touchscreen, meaning it is built directly into the display unit. Touchdata is gathered through PIXCIR Tango-ICs and processed in an Atmel ATmega168P with custom firmware. Communication between the host system and ATmega is done via I2C. Devices using this touch solution include the Dell Streak5 and the family of Qisda ebook readers. The driver reports single- and multi-touch events including touch area values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-24Input: mpu3050 - configure the sampling methodHeikki Krogerus
This will improve the output of the sensor. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-24Input: mpu3050 - ensure we enable interruptsHeikki Krogerus
This also changes the devname parameter delivered to request_threaded_irq() from "mpu_int" to "mpu3050". Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-24Input: mpu3050 - add of_match table for device-tree probingOlof Johansson
Adding invn,mpu3050 as the initial id. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-23Input: sentelic - release mutex upon register write failureTai-hwa Liang
Make sure that mutex is released upon register writing failure. This fixes boot freezing observed on ARM based OLPC (http://dev.laptop.org/ticket/11357). Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-23Input: sentelic - document the latest hardwareTai-hwa Liang
- Add documentation for the Cx/Dx hardware release; - Fix wrong register offset for retrieving button information; - Document programming sequence for page register R/W; - Document a couple of supported gesture IDs. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: wacom - add LED support for Cintiq 24HDJason Gerecke
The Cintiq 24HD has three LEDs on the left side of the tablet and three LEDs on the right side of the tablet. Switching to LED 0, 1, or 2 will enable the top, middle, or bottom LED for the respective side. Switching to LED 3 turns off the LEDs on the respective side. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: wacom - add support for Cintiq 24HDJason Gerecke
Adds support for the Cintiq 24HD. There are two quirks about this model that haven't been seen in prior tablets. First, a second touch ring is present on this display; it is being exposed via the ABS_THROTTLE axis. Second, three capacitive buttons at the top of the unit are available; though physically a touch strip, we report the use of these buttons with generic KEY_ events. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: synaptics - fix touchpad not working after S2R on Vostro V13Dmitry Torokhov
Synaptics touchpads on several Dell laptops, particularly Vostro V13 systems, may not respond properly to PS/2 commands and queries immediately after resuming from suspend to RAM. This leads to unresponsive touchpad after suspend/resume cycle. Adding a 1-second delay after resetting the device allows touchpad to finish initializing (calibrating?) and start reacting properly. Reported-by: Daniel Manrique <daniel.manrique@canonical.com> Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: add driver for Sharp gp2ap002a00f proximity sensorCourtney Cavin
This driver adds support for Sharp's GP2AP002A00F proximity sensor. The proximity is measured as a binary switch, i.e. an object is either detected or not detected. Hence, this driver is implemented as a switch that reports SW_FRONT_PROXIMITY. Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com> Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: keyboard - staticise non-exported symbolsAxel Lin
These symbols are not used outside it's driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: mc13783-pwrbutton - convert to use module_platform_driver()Axel Lin
This patch converts mc13783-pwrbutton to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Also staticise mc13783_pwrbutton_driver which is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: migor-ts - rework probe() to simplify error pathDmitry Torokhov
Register input device last so that we do not have to reset input device pointer after calling input_unregister_device(). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: migor-ts - use proper client data accessor functionsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: migor-ts - convert to a threaded IRQDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-25 09:19:48 +0000