| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
the same calculation is done in p9_client_write
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
The presence of v9fs_direct_IO() in the address space ops vector
allowes open() O_DIRECT flags which would have failed otherwise.
In the non-cached mode, we shunt off direct read and write requests before
the VFS gets them, so this method should never be called.
Direct IO is not 'yet' supported in the cached mode. Hence when
this routine is called through generic_file_aio_read(), the read/write fails
with an error.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
The current implementation of 9p client mkdir function does not
set the S_ISGID mode bit for the directory being created if the
parent directory has this bit set. This patch fixes this problem
so that the newly created directory inherits the gid from parent
directory and not from the process creating this directory, when
the S_ISGID bit is set in parent directory.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
A patch was accepted recently for sending correct buffer size to p9stat_read.
We need a similar patch in v9fs_dir_readdir_dotl to send correct end of buffer
to p9dirent_read.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Current 9p client file write code does not check for RLIMIT_FSIZE resource.
This bug was found by running LTP test case for setrlimit. This bug is fixed
by calling generic_write_checks before sending the write request to the
server.
Without this patch: the write function is allowed to write above the
RLIMIT_FSIZE set by user.
With this patch: the write function checks for RLIMIT_SIZE and writes upto
the size limit.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
git_t is unsigned an can never be less than zero.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
ext4,jbd2: convert tracepoints to use major/minor numbers
ext4: optimize orphan_list handling for ext4_setattr
ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
ext4: fix compile error in ext4_fallocate()
ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
ext4: rename {ext,idx}_pblock and inline small extent functions
ext4: make various ext4 functions be static
ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
ext4: fix kernel oops if the journal superblock has a non-zero j_errno
ext4: update writeback_index based on last page scanned
ext4: implement writeback livelock avoidance using page tagging
ext4: tidy up a void argument in inode.c
ext4: add batched_discard into ext4 feature list
ext4: Add batched discard support for ext4
fs: Add FITRIM ioctl
ext4: Use return value from sb_issue_discard()
ext4: Check return value of sb_getblk() and friends
ext4: use bio layer instead of buffer layer in mpage_da_submit_io
...
|
|
Conflicts:
fs/ext4/inode.c
fs/ext4/mballoc.c
include/trace/events/ext4.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: enable unmappable vram for evergreen
drm/radeon/kms: fix tiled db height calculation on 6xx/7xx
drm/radeon/kms: fix handling of tex lookup disable in cs checker on r2xx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
|
|
Unfortunately perf can't deal with anything other than direct structure
accesses in the TP_printk() section. It will drop dead when it sees
jbd2_dev_to_name() in the "print fmt" section of the tracepoint.
Addresses-Google-Bug: 3138508
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Surprisingly chown() on ext4 is not SMP scalable operation.
Due to unconditional orphan_del(NULL, inode) in ext4_setattr()
result in significant performance overhead because of global orphan
mutex, especially in no-journal mode (where orphan_add() is noop).
It is possible to skip explicit orphan_del if possible.
Results of fchown() micro-benchmark in no-journal mode
while (1) {
iteration++;
fchown(fd, uid, gid);
fchown(fd, uid + 1, gid + 1)
}
measured: iterations per millisecond
| nr_tasks | w/o patch | with patch |
| 1 | 142 | 185 |
| 4 | 109 | 642 |
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits)
DMAENGINE: move COH901318 to arch_initcall
dma: imx-dma: fix signedness bug
dma/timberdale: simplify conditional
ste_dma40: remove channel_type
ste_dma40: remove enum for endianess
ste_dma40: remove TIM_FOR_LINK option
ste_dma40: move mode_opt to separate config
ste_dma40: move channel mode to a separate field
ste_dma40: move priority to separate field
ste_dma40: add variable to indicate valid dma_cfg
async_tx: make async_tx channel switching opt-in
move async raid6 test to lib/Kconfig.debug
dmaengine: Add Freescale i.MX1/21/27 DMA driver
intel_mid_dma: change the slave interface
intel_mid_dma: fix the WARN_ONs
intel_mid_dma: Add sg list support to DMA driver
intel_mid_dma: Allow DMAC2 to share interrupt
intel_mid_dma: Allow IRQ sharing
intel_mid_dma: Add runtime PM support
DMAENGINE: define a dummy filter function for ste_dma40
...
|
|
* 'viafb-next' of git://github.com/schandinat/linux-2.6: (29 commits)
viafb: add initial VX900 support
viafb: fix hardware acceleration for suspend & resume
viafb: make suspend and resume work (on all machines?)
viafb: restore display on resume
Minimal support for viafb suspend/resume
viafb: use proper register for colour when doing fill ops
viafb: add documentation for proc interface
viafb: rename output devices
viafb: add a mapping of supported output devices
viafb: set sync polarity for all output devices
viafb: add function to change sync polarity per device
viafb: reduce I2C timeout and delay
viafb: enable I2C for CRT
viafb: fix i2c_transfer error handling
viafb: vt1636 cleanup
viafb: introduce per output device power management
viafb: limit LCD code impact
viafb: add interface for output device configuration
viafb: merge the remaining output path with enable functions
viafb: use new device routing
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
MN10300: Save frame pointer in thread_info struct rather than global var
MN10300: Change "Matsushita" to "Panasonic".
MN10300: Create a defconfig for the ASB2364 board
MN10300: Update the ASB2303 defconfig
MN10300: ASB2364: Add support for SMSC911X and SMC911X
MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
MN10300: Generic time support
MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
MN10300: Map userspace atomic op regs as a vmalloc page
MN10300: And Panasonic AM34 subarch and implement SMP
MN10300: Delete idle_timestamp from irq_cpustat_t
MN10300: Make various interrupt priority settings configurable
MN10300: Optimise do_csum()
MN10300: Implement atomic ops using atomic ops unit
MN10300: Make the FPU operate in non-lazy mode under SMP
MN10300: SMP TLB flushing
MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
MN10300: Make the use of PIDR to mark TLB entries controllable
MN10300: Rename __flush_tlb*() to local_flush_tlb*()
MN10300: AM34 erratum requires MMUCTR read and write on exception entry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: usb-audio: automatically detect feedback format
ASoC: sound/wm9090: add missing __devexit marker
ASoC: sound/max98088: add missing __devexit marker
ASoC: sound/ad73311: add missing __devexit marker
ASoC: fsl - fix build error in pcm030-audio-fabric.c
sound/oss/sb_ess.c: delete double assignment
ALSA: hda - Change BTL amp level on some HP notebooks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
perf python scripting: Add futex-contention script
perf python scripting: Fixup cut'n'paste error in sctop script
perf scripting: Shut up 'perf record' final status
perf record: Remove newline character from perror() argument
perf python scripting: Support fedora 11 (audit 1.7.17)
perf python scripting: Improve the syscalls-by-pid script
perf python scripting: print the syscall name on sctop
perf python scripting: Improve the syscalls-counts script
perf python scripting: Improve the failed-syscalls-by-pid script
kprobes: Remove redundant text_mutex lock in optimize
x86/oprofile: Fix uninitialized variable use in debug printk
tracing: Fix 'faild' -> 'failed' typo
perf probe: Fix format specified for Dwarf_Off parameter
perf trace: Fix detection of script extension
perf trace: Use $PERF_EXEC_PATH in canned report scripts
perf tools: Document event modifiers
perf tools: Remove direct slang.h include
perf_events: Fix for transaction recovery in group_sched_in()
perf_events: Revert: Fix transaction recovery in group_sched_in()
perf, x86: Use NUMA aware allocations for PEBS/BTS/DS allocations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
NULL-terminate all pci_device_id tables
(trivial) Fix compiler warning in kernel/modules.c
|
|
* akpm-incoming-2: (139 commits)
epoll: make epoll_wait() use the hrtimer range feature
select: rename estimate_accuracy() to select_estimate_accuracy()
Remove duplicate includes from many files
ramoops: use the platform data structure instead of module params
kernel/resource.c: handle reinsertion of an already-inserted resource
kfifo: fix kfifo_alloc() to return a signed int value
w1: don't allow arbitrary users to remove w1 devices
alpha: remove dma64_addr_t usage
mips: remove dma64_addr_t usage
sparc: remove dma64_addr_t usage
fuse: use release_pages()
taskstats: use real microsecond granularity for CPU times
taskstats: split fill_pid function
taskstats: separate taskstats commands
delayacct: align to 8 byte boundary on 64-bit systems
delay-accounting: reimplement -c for getdelays.c to report information on a target command
namespaces Kconfig: move namespace menu location after the cgroup
namespaces Kconfig: remove the cgroup device whitelist experimental tag
namespaces Kconfig: remove pointless cgroup dependency
namespaces Kconfig: make namespace a submenu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
percpu: Remove the multi-page alignment facility
x86-32: Allocate irq stacks seperate from percpu area
x86-32, mm: Remove duplicated #include
x86, printk: Get rid of <0> from stack output
x86, kexec: Make sure to stop all CPUs before exiting the kernel
x86/vsmp: Eliminate kconfig dependency warning
|
|
The BKL was pushed into this function when it was converted to use the
unlocked_ioctl interface, but nothing that the function touches is
actually protected by the BKL. So just remove the BKL entirely, so that
we finally can get a realistic system build without the BKL being
enabled at all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I compiled 2.6.36-rc3 kernel with EXT4FS_DEBUG definition, I got
the following compile error.
CC [M] fs/ext4/extents.o
fs/ext4/extents.c: In function 'ext4_fallocate':
fs/ext4/extents.c:3772: error: 'block' undeclared (first use in this function)
fs/ext4/extents.c:3772: error: (Each undeclared identifier is reported only once
fs/ext4/extents.c:3772: error: for each function it appears in.)
make[2]: *** [fs/ext4/extents.o] Error 1
The patch fixes this problem.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
These functions are only used within fs/ext4/mballoc.c, so move them
so they are used after they are defined, and then make them be static.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Fix a namespace leak from fs/ext4
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Fix a namespace leak by moving the function to the file where it is
used and making it static.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Cleanup namespace leaks from fs/ext4 and the inline trivial functions
ext4_{ext,idx}_pblock() and ext4_{ext,idx}_store_pblock() since the
code size actually shrinks when we make these functions inline,
they're so trivial.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
These functions have no need to be exported beyond file context.
No functions needed to be moved for this commit; just some function
declarations changed to be static and removed from header files.
(A similar patch was submitted by Eric Sandeen, but I wanted to handle
code movement in separate patches to make sure code changes didn't
accidentally get dropped.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This is a cleanup to avoid namespace leaks out of fs/ext4
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Commit 84061e0 fixed an accounting bug only to introduce the
possibility of a kernel OOPS if the journal has a non-zero j_errno
field indicating that the file system had detected a fs inconsistency.
After the journal replay, if the journal superblock indicates that the
file system has an error, this indication is transfered to the file
system and then ext4_commit_super() is called to write this to the
disk.
But since the percpu counters are now initialized after the journal
replay, the call to ext4_commit_super() will cause a kernel oops since
it needs to use the percpu counters the ext4 superblock structure.
The fix is to skip setting the ext4 free block and free inode fields
if the percpu counter has not been set.
Thanks to Ken Sumrall for reporting and analyzing the root causes of
this bug.
Addresses-Google-Bug: #3054080
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
As pointed out in a prior patch, updating the mapping's
writeback_index based on pages written isn't quite right;
what the writeback index is really supposed to reflect is
the next page which should be scanned for writeback during
periodic flush.
As in write_cache_pages(), write_cache_pages_da() does
this scanning for us as we assemble the mpd for later
writeout. If we keep track of the next page after the
current scan, we can easily update writeback_index without
worrying about pages written vs. pages skipped, etc.
Without this, an fsync will reset writeback_index to
0 (its starting index) + however many pages it wrote, which
can mess up the progress of periodic flush.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This is analogous to Jan Kara's commit,
f446daaea9d4a420d16c606f755f3689dcb2d0ce
mm: implement writeback livelock avoidance using page tagging
but since we forked write_cache_pages, we need to reimplement
it there (and in ext4_da_writepages, since range_cyclic handling
was moved to there)
If you start a large buffered IO to a file, and then set
fsync after it, you'll find that fsync does not complete
until the other IO stops.
If you continue re-dirtying the file (say, putting dd
with conv=notrunc in a loop), when fsync finally completes
(after all IO is done), it reports via tracing that
it has written many more pages than the file contains;
in other words it has synced and re-synced pages in
the file multiple times.
This then leads to problems with our writeback_index
update, since it advances it by pages written, and
essentially sets writeback_index off the end of the
file...
With the following patch, we only sync as much as was
dirty at the time of the sync.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This doesn't fix anything at all, it just removes a vestige
of prior use from __mpage_da_writepage()
__mpage_da_writepage() had a *void argument leftover from
its previous life as a callback; make it reflect the actual type.
Fixing this up makes it slightly more obvious to read, and
enables proper typechecking.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Should be applied on the top of "lazy inode table initialization"
and "batched discard support" patch-sets.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).
It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks
are marked as used and then trimmed. Afterwards these blocks are marked
as free in per-group bitmap.
Since fstrim is a long operation it is good to have an ability to
interrupt it by a signal. This was added by Dmitry Monakhov.
Thanks Dimitry.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Adds an filesystem independent ioctl to allow implementation of file
system batched discard support. I takes fstrim_range structure as an
argument. fstrim_range is definec in the include/fs.h and its
definition is as follows.
struct fstrim_range {
start;
len;
minlen;
}
start - first Byte to trim
len - number of Bytes to trim from start
minlen - minimum extent length to trim, free extents shorter than this
number of Bytes will be ignored. This will be rounded up to fs
block size.
It is also possible to specify NULL as an argument. In this case the
arguments will set itself as follows:
start = 0;
len = ULLONG_MAX;
minlen = 0;
So it will trim the whole file system at one run.
After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Use return value from sb_issue_discard() as return value in
ext4_issue_discard(). Since sb_issue_discard() may result in more
serious errors than just -EOPNOTSUPP it is worth to inform user of this
function about them to handle error cases properly.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Fail block allocation if sb_getblk() returns NULL. In that case,
sb_find_get_block() also likely to fail so that it should skip
calling ext4_forget().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Call the block I/O layer directly instad of going through the buffer
layer. This should give us much better performance and scalability,
as well as lowering our CPU utilization when doing buffered writeback.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This massively simplifies the ext4_da_writepages() code path by
completely removing mpage_put_bnr_bhs(), which is almost 100 lines of
code iterating over a set of pages using pagevec_lookup(), and folds
that functionality into mpage_da_submit_io()'s existing
pagevec_lookup() loop.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Expand the call:
if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
ext4_bh_delay_or_unwritten))
goto redirty_page
into mpage_da_submit_io().
This will allow us to merge in mpage_put_bnr_to_bhs() in the next
patch.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
As a prepratory step to switching to bio_submit, inline
ext4_writepage() into mpage_da_submit() and then simplify things a
bit. This makes it clearer what mpage_da_submit needs to do.
Also, move the ClearPageChecked(page) call into
__ext4_journalled_writepage(), as a minor bit of cleanup refactoring.
This also allows us to pull i_size_read() and
ext4_should_journal_data() out of the loop, which should be a very
minor CPU savings.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The actual code in ext4_writepage() is unnecessarily convoluted.
Simplify it so it is easier to understand, but otherwise logically
equivalent.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Eventually we need to completely reorganize the ext4 writepage
callpath, but for now, we simplify things a little by calling
mpage_da_submit_io() from mpage_da_map_blocks(), since all of the
places where we call mpage_da_map_blocks() it is followed up by a call
to mpage_da_submit_io().
We're also a wee bit better with respect to error handling, but there
are still a number of issues where it's not clear what the right thing
is to do with ext4 functions deep in the writeback codepath fails.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Also remove the SLAB_RECLAIM_ACCOUNT flag from the system zone kmem
cache. This slab tends to be fairly static, so it shouldn't be marked
as likely to have free pages that can be reclaimed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Use the search_dirblock() in ext4_dx_find_entry(). It makes the code
easier to read, and it takes advantage of common code. It also saves
100 bytes or so of text space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
|
|
If the first block of htree directory is missing '.' or '..' but is
otherwise a valid directory, and we do a lookup for '.' or '..', it's
possible to dereference an uninitialized memory pointer in
ext4_htree_next_block().
We avoid this by moving the special case from ext4_dx_find_entry() to
ext4_find_entry(); this also means we can optimize ext4_find_entry()
slightly when NFS looks up "..".
Thanks to Brad Spengler for pointing a Clang warning that led me to
look more closely at this code. The warning was harmless, but it was
useful in pointing out code that was too ugly to live. This warning was
also reported by Roman Borisov.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
|
|
Not that these take up a lot of room, but the structure is long enough
as it is, and there's no need to confuse people with these various
undocumented & unused structure members...
Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
