summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-01-21Merge tag 'bcm-for-3.14-dt' of git://github.com/broadcom/bcm11351 into next/dtKevin Hilman
From Christian Daudt: Add i2c, usb and clock DT configuration to bcm mobile. * tag 'bcm-for-3.14-dt' of git://github.com/broadcom/bcm11351: (697 commits) clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses +Linux 3.13-rc5 ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-16Merge tag 'davinci-for-v3.14/dt' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt From Sekhar Nori: DaVinci device tree file updates to add GPIO support. * tag 'davinci-for-v3.14/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850 evm: add GPIO pinumux entries DT node ARM: davinci: da850: add GPIO DT node Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14Merge tag 'sirf-dts-for-3.14' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt ARM: sirf: dts update for 3.14 From Barry Song: some missed dt nodes or props for sirf dts for 3.14. Among them: - add lost clocks for cphifbg - add lost bus_width, clock and status for sdhci - add clock, frequence-voltage table for CPU0 - add lost minigpsrtc device node - add lost usp1_uart_nostreamctrl pin group for atlas6 - add pin group for USP0 with only RX or TX frame sync * tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14Merge tag 'socfpga-dt-for-3.14' of ↵Kevin Hilman
git://git.rocketboards.org/linux-socfpga-next into next/dt From Dinh Nguyen: SOCFPGA DT updates for v3.14 * tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next: ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14Merge tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux into next/dtKevin Hilman
From Maxime Ripard: Second round of DT additions for 3.14 Mostly: - Addition of the missing PLLs and module clocks - Addition of the external clocks - Addition of the touchscreen controler - I2C nodes of the Cubietruck * tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux: arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ARM: sun4i: dt: Remove chosen nodes ARM: sun4i: dt: Move the aliases to the DTSI ARM: sunxi: dt: add nodes for the mbus clock ARM: sun7i: dt: mod0 clocks ARM: sun5i: dt: mod0 clocks ARM: sun4i: dt: mod0 clocks ARM: sunxi: add PLL5 and PLL6 support ARM: sunxi: add PLL4 support Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-09ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame syncRongjun Ying
add pin groups for USP0 only holding one of TX and RX frame sync. this patch matches with the change in drivers/pinctrl/sirf. Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Barry.Song@csr.com>
2014-01-09ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6Qipan Li
this patch adds lost usp1_uart_nostreamctrl pin group for atlas6, which matches with the change in drivers/pinctrl/sirf/pinctrl-atlas6.c. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2014-01-09ARM: dts: sirf: add lost minigpsrtc device nodeXianglong Du
This patch adds lost minigpsrtc device node for prima2 and atlas6, which is behind rtc-iobg and whose offset is 2000. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2014-01-09ARM: dts: sirf: add clock, frequence-voltage table for CPU0Rongjun Ying
prima2 and atlas6 uses cpufreq_cpu0, here we put related clock, operation points in dtsi. Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2014-01-09ARM: dts: sirf: add lost bus_width, clock and status for sdhciBin Shi
some nodes missed bus_width, clocks and status properties, here we fix them in prima2 and atlas6 dtsi. Signed-off-by: Bin Shi <Bin.Shi@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2014-01-09ARM: dts: sirf: add lost clocks for cphifbgBarry Song
This patch adds lost clocks property(index 42) for cphifbg node in prima2 and atlas6 dtsi. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2014-01-08Merge tag 'ux500-devicetree-v3.14-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: Ux500 device tree patches for v3.14, take 2 - Delete some unused U8540 UART platform data. - MMC/SD-fixes from Ulf Hansson so everything works with the device tree again. * tag 'ux500-devicetree-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: regulators: Remove dead code for SD-card regulator ARM: ux500: Configure regulator for I/O voltage for SD-card slot ARM: ux500: Refactor common DT configs for sdi[n] devices ARM: ux500: delete U8540 UART auxdata Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-08Merge tag 'renesas-dt-fixes-for-v3.14' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM Based SoC DT Fixes for v3.14 Revert the addition of SSI clocks to DT for the r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs. Unfortunately these patches prevent booting the r8a7790-based Lager board and r8a7791-based Koelsch board to the point where a serial output is available. A solution to this problem is being sought but has not yet been finalised so in the mean time revert the changes. * tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree" Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree" Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-08ARM: dts: socfpga: add pl330 clockSteffen Trumtrar
The pl330 dmac won't be added to the list of amba devices, as it doesn't have a clock entry. Add the clock. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-08ARM: dts: socfpga: update L2 tag and data latencyDinh Nguyen
Sets the appropriate L2-cache latencies for the SOCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-01-07arm: sun7i: cubietruck: Enable the i2c controllersChen-Yu Tsai
The Cubietruck makes use of the first three i2c controllers found on the Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on the board headers, and i2c-2 is used for DDC on the VGA connector. This patch enables them in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-04Merge tag 'samsung-dt-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Samsung DT 3rd updates for v3.14 - add exynos4412-tiny4412 board dt for FriendlyARM's TINY4412 board including initial support UART, SD card and LEDs - add exynos5420-arndale-octa board dt for Arndale Octa board * tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-04ARM: dts: add support for EXYNOS4412 based TINY4412 boardAlex Ling
Add a minimal board dts file for EXYNOS4412 based FriendlyARM's TINY4412 board. This patch including support peripherals like UART, SD card on SDMMC2 port and GPIO connected LEDs. Signed-off-by: Alex Ling <kasimling@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-01-04ARM: dts: Add initial support for Arndale Octa boardSachin Kamat
Arndale Octa board is based on Exynos5420 SoC. This patch adds the basic support required for booting it through DT. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-01-03Merge tag 'renesas-dt3-for-v3.14' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: bcm2835: add USB controller to device treeStephen Warren
The BCM2835 SoC contains a DWC2 USB controller. Add this to the DT. Set up the pin controller to fully enable the USB controller on the Raspberry Pi. The GPIO setup works because the default output value for GPIO 6 (LAN_RUN/n_reset) just happens to be 1, which enables the USB/LAN chip. Note that you'll need a U-Boot which enables power to the USB controller; search for U-Boot patch "ARM: rpi_b: power on SDHCI and USB HW modules". Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux into next/dtOlof Johansson
From Maxime Ripard: Allwinner sunXi DT Additions for 3.14 Various DT related patches, but mostly: - Support for the Olimex A13-olinuxino-micro - Added the needed IP in the A31 for the HS timer support and SMP bringup - A10 and A20 RTC * tag 'sunxi-dt-for-3.14' of https://github.com/mripard/linux: ARM: sun6i: dt: Add IP needed to bring up the additional cores ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board ARM: sun6i: Add the reset controller to the DTSI ARM: sunxi: dt: add EMAC aliases ARM: dts: sun4i/sun7i: add RTC node Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
From Jason Cooper: mvebu DT changes for v3.14 (incremental #5) - mvebu - add rtc chip isl12057 node to ReadyNAS boards - fix register length in Armada XP pmsu - kirkwood - sort ocp nodes by address in 6282 dtsi file - add 6192 dtsi file - add LaPlug board - add sata phy node - dove - add sata phy node * tag 'mvebu-dt-3.14-5' of git://git.infradead.org/linux-mvebu: ARM: Kirkwood: DT board setup for LaPlug ARM: Kirkwood: Add 6192 DTSI file ARM: mvebu: fix register length for Armada XP PMSU ARM: kirkwood: 6282: sort DT nodes by address Phy: Add DT nodes on kirkwood and Dove for the SATA PHY ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge branch 'qcom/dt' into next/dtOlof Johansson
* qcom/dt: ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: msm: trout: fix uninit var warning Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: dts: MSM8974: Add MMIO architected timer nodeStephen Boyd
Add the mmio architected timer node. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: dts: MSM8974: Add restart nodeStephen Boyd
Add the restart node so we can reboot the device. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: Simplify ARCH_MSM_DT configStephen Boyd
This doesn't need to be a def_bool y. Instead we can have every DT supported platform select ARCH_MSM_DT and we achieve the same thing with less chance of conflicts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: Add support for MSM8974 SoCRohit Vaswani
Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard and others. Board support added in separate patch. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> [olof: split off SoC support in separate patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: trout: fix uninit var warningJosh Cartwright
Fix the following warning when !CONFIG_MMC: arch/arm/mach-msm/board-trout.c: In function 'trout_init': arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable] int rc; ^ Also, while we're here, rework explicit printk(KERN_CRIT..) to use pr_crit. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: dts: sun7i: external clock outputsChen-Yu Tsai
This commit adds the two external clock outputs available on A20 to its device tree. A dummy fixed factor clock is also added to serve as the first input of the clock outputs, which according to AW's A20 user manual, is the 24MHz oscillator divided by 750. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-02ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N styleChen-Yu Tsai
Device tree naming conventions state that node names should match the nodes function. Change external low speed oscillator node name to match. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-02ARM: dts: sun7i: Add pin muxing options for clock outputsChen-Yu Tsai
This patch adds the clock output pin options on the A20. The 2 pins can output a configurable clock to be used by external modules. This is used on the CubieTruck, to supply a 32768 Hz low power clock to the onboard Wifi+BT module. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-01ARM: dts: sun7i: Add rtp controller nodeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-01ARM: dts: sun5i: Add rtp controller nodeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-01ARM: dts: sun4i: Add rtp controller nodeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-31clk: bcm281xx: define kona clock bindingAlex Elder
Document the device tree binding for Broadcom Kona architecture clock control units and clocks. Kona device nodes are represented with compatible strings having "bcm11351" in their name. Kona clocks are managed by "clock control units" (CCUs). Each CCU has a device tree node, and within that node are defined the names of the clocks provided by the CCU. The BCM281xx family of SoCs use Kona CCUs and clocks. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
2013-12-29ARM: sun4i: dt: Remove chosen nodesMaxime Ripard
The chosen nodes are nowadays pretty useless, since they will be overriden by the bootloader anyway. We can thus safely remove them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-29ARM: sun4i: dt: Move the aliases to the DTSIMaxime Ripard
The aliases are shared across boards are really belong to the DTSI. Move them there. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-29Merge tag 'sunxi-clk-3.14-for-maxime' of ↵Maxime Ripard
https://bitbucket.org/emiliolopez/linux into sunxi/dt-for-3.14 Allwinner sunXi SoCs DT changes for clocks This contains the DT parts of the "[PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support" series. It adds DT nodes for PLL4/5/6 and mod0 clocks on most sunxi platforms.
2013-12-29Merge tag 'renesas-dt2-for-v3.14' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Second Round of Renesas ARM Based SoC DT Updates for v3.13 * r8a7791 (R-Car M2) based Koelsch board - Add GPIO keys * sh73a0 (SH-Mobile AG5) based kzm9g board - Add FSI support * tag 'renesas-dt2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: dts: Add gpio-keys device ARM: shmobile: kzm9g: add FSI support for DTS ARM: shmobile: sh73a0: add FSI support via DTSI Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-28ARM: sunxi: dt: add nodes for the mbus clockEmilio López
mbus is the memory bus clock, and it is present on both sun5i and sun7i machines. Its register layout is compatible with the mod0 one. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sun7i: dt: mod0 clocksEmilio López
This commit adds all the mod0 clocks available on A20 to its device tree. This list was created by looking at AW's code release. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sun5i: dt: mod0 clocksEmilio López
This commit adds all the mod0 clocks available on A10 and A13. The list has been constructed by looking at the Allwinner code release for A10S and A13. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sun4i: dt: mod0 clocksEmilio López
This commit adds all the mod0 clocks present on sun4i to its device tree Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: add PLL5 and PLL6 supportEmilio López
This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i device trees. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: add PLL4 supportEmilio López
This commit adds the PLL4 definition to the sun4i, sun5i and sun7i device trees. PLL4 is compatible with PLL1. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-27Merge tag 'tegra-for-3.14-dt-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt From Stephen Warren: ARM: tegra: second set of device tree changes This branch contains changes to Tegra's device tree that came in after I sent the previous pull-request/tag tegra-for-3.14-dt. Changes are: * Set up aliases for RTCs, so that the correct RTC is chosen to initialize the system date/time. * Venice2 pinctrl and regulator configuration. * Built-in panel enablement for Harmony, Cardhu, Dalmore. * HDMI enablement for Dalmore. * USB2 port enablement for Beaver. * Keyboard and power key enablement for Venice2. * tag 'tegra-for-3.14-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable power key on Venice2 ARM: tegra: Enable Venice2 keyboard ARM: tegra: enable USB2 on Tegra30 Beaver ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI ARM: tegra: Enable HDMI support on Dalmore ARM: tegra: Enable DSI support on Dalmore ARM: tegra: Add Tegra114 gr3d support ARM: tegra: Add Tegra114 gr2d support ARM: tegra: Add Tegra114 DSI support ARM: tegra: Add host1x, DC and HDMI to Tegra114 device tree ARM: tegra: Add MIPI calibration DT entries for Tegra114 ARM: tegra: Enable LVDS on Cardhu ARM: tegra: Enable LVDS on Harmony ARM: tegra: set up /aliases for RTCs on Venice2 ARM: tegra: add ams AS3722 device to Venice2 DT ARM: tegra: fix missing pincontrol configuration for Venice2 ARM: tegra: set up /aliases entries for RTCs Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge tag 'tegra-for-3.14-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt From Stephen Warren: ARM: tegra: device tree changes This branch contains all the changes to Tegra's device tree. The highlights are: * Many patches for Tegra124 SoC support, and the Venice2 board which uses that SoC. * Conversion to use more headers providing named constants for pinctrl and key codes, which improves readability. * A few cleanups. This branch is based on tag tegra-for-3.14-dmas-resets-rework in order to avoid conflicts with the DT changes required to use the common bindings for DMAs and resets. * tag 'tegra-for-3.14-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (24 commits) ARM: tegra: Add SPI controller nodes for Tegra124 ARM: tegra: Fix misconfiguration of pin PH2 on Venice2 ARM: tegra: fix pinctrl misconfiguration on Venice2 ARM: tegra: add default pinctrl nodes for Venice2 ARM: tegra: correct Colibri T20 regulator settings ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines ARM: tegra: convert dts files of Tegra114 platforms to use pinctrl defines ARM: tegra: Add header file for pinctrl constants ARM: tegra: convert device tree files to use key defines ARM: tegra: Enable PWM on Venice2 ARM: tegra: Add Tegra124 PWM support ARM: tegra: add sound card to Venice2 DT ARM: tegra: add audio-related device to Tegra124 DT ARM: tegra: enable I2C controllers on Venice2 ARM: tegra: add I2C controllers to Tegra124 DT ARM: tegra: add MMC controllers to Tegra124 DT ARM: tegra: add Tegra124 pinmux node to DT ARM: tegra: add APB DMA controller to Tegra124 DT ARM: tegra: add reset properties to Tegra124 DTs ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge branch 'tegra/dma-reset-rework' into next/dtOlof Johansson
Bringing in the tegra dma/reset framework cleanup as a base for the DT changes. * tegra/dma-reset-rework: (320 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"Simon Horman
This reverts commit b652896b02df3dfde3a68957cce01f2aa4585842. Unfortunately this commit prevents multiplatform from booting to the point where a serial console is available. Revert it while a solution is sought. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-28 03:30:29 +0000