summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-12-10isdn: Fix printed out copy_from_user() return value after previous change.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10bonding: add the debugfs facility to the bonding driverTaku Izumi
This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Move enic port profile handling code to a new 802.1Qbh provisioning ↵Roopa Prabhu
info type Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10isdn: return -EFAULT if copy_from_user() failsDan Carpenter
We should be returning -EFAULT here. Mostly this patch is to silence a smatch warning. The upper levels of this driver turn all non-zero return values from isar_load_firmware() into 1. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: update driver versionJon Mason
Update vxge driver version to 2.5.1 Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: independent interrupt moderationJon Mason
Configure the workload clock register and TIM register for independent interrupt moderation based on the individual vpath utilization instead of common link utilization. This greatly improves latency. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: hotplug stallJon Mason
When hot-unplugging a vxge adapter while running, the driver's remove routine prints warning and then stalls the calling thread. This is due to vxge_remove calling vxge_device_unregister to unregister the netdev before calling flush_scheduled_work clear any pending work. Swapping the order of these two functions resolves the issue. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: transmit timeout deadlockJon Mason
Use a workqueue to handle the device reset during a transmit timeout, as there can be a deadlock during bringup. Also, set the netif carrier off before the watchdog reset is started to prevent the timeout from reoccurring while still processing the first. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: use pci_request_region()Jon Mason
Only BAR0 is ever accessed, thus making the calls to pci_request_regions overkill. Change calls of pci_request_regions to pci_request_region to reduce the size of the mapped area. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: fix crash of VF when unloading PFJon Mason
Calling pci_disable_sriov when unloading a SR-IOV physical function driver from a host when a guest is using a virtual function from that device can cause a host crash or VM crash. The crash is caused by the virtual config space no longer being present when PF is removed (due to the pci_disable_sriov). This can be avoided by not calling pci_disable_sriov to disable the PCI space when shutting down the PF. Each function in the X3100 operates independently and in this case will operate properly in the absence of the PF. Also, added improved logic in the detection of SR-IOV initialization. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10vxge: code cleanup and reorganizationJon Mason
Move function locations to remove the need for internal declarations and other misc clean-ups. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: Arpit Patel <arpit.patel@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10bridge: Use consistent NF_DROP returns in nf_pre_routingHerbert Xu
The nf_pre_routing functions in bridging have collected two distinct ways of returning NF_DROP over the years, inline and via goto. There is no reason for preferring either one. So this patch arbitrarily picks the inline variant and converts the all the gotos. Also removes a redundant comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10af_packet: use swap() instead of the open coded macro XC()Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10netdev: Use default implementation of ethtool_ops::get_link where possibleBen Hutchings
Various drivers are using implementations of ethtool_ops::get_link that are equivalent to the default ethtool_op_get_link(). Change them to use that instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ethtool: Report link-down while interface is downBen Hutchings
While an interface is down, many implementations of ethtool_ops::get_link, including the default, ethtool_op_get_link(), will report the last link state seen while the interface was up. In general the current physical link state is not available if the interface is down. Define ETHTOOL_GLINK to reflect whether the interface *and* any physical port have a working link, and consistently return 0 when the interface is down. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Use VF mac set by IFLA_VF_MAC in port profile provisioning dataRoopa Prabhu
This patch adds support in enic 802.1Qbh port profile provisioning code to use the mac address set by IFLA_VF_MAC. For now we handle this mac as a special case for a VM mac address sent to us by libvirt. The VM mac address is sent to the switch along with the rest of the port profile provisioning data. This patch also adds calls to register and deregister the mac address during port profile association/deassociation. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Add ndo_set_vf_mac support for enic dynamic devicesRoopa Prabhu
This patch implements the ndo_set_vf_mac netdev operation for enic dynamic devices. It treats the mac address set by IFLA_VF_MAC as a special case to use it in the port profile provisioning data. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10enic: Add ndo_set_rx_mode support for enic vnicsRoopa Prabhu
Add ndo_set_rx_mode support to register unicast and multicast address filters for enic devices Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10pktgen: adding prefetchw() callJunchang Wang
We know for sure pktgen is going to write skb->data right after *_alloc_skb, causing unnecessary cache misses. Idea is to add a prefetchw() call to prefetch the first cache line indicated by skb->data. On systems with Adjacent Cache Line Prefetch, it's probably two cache lines are prefetched. With this patch, pktgen on Intel SR1625 server with two E5530 quad-core processors and a single ixgbe-based NIC went from 8.63Mpps to 9.03Mpps, with 4.6% improvement. Signed-off-by: Junchang Wang <junchangwang@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10sfc: convert references to LRO to GROstephen hemminger
This driver now uses Generic Receive Offload, not the older LRO. Change references to LRO in names and comments. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10inet6: Remove redundant unlikely()Tobias Klauser
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10stmmac: Remove redundant unlikely()Tobias Klauser
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10xfrm: Traffic Flow Confidentiality for IPv6 ESPMartin Willi
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10xfrm: Traffic Flow Confidentiality for IPv4 ESPMartin Willi
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10xfrm: Add Traffic Flow Confidentiality padding XFRM attributeMartin Willi
The XFRMA_TFCPAD attribute for XFRM state installation configures Traffic Flow Confidentiality by padding ESP packets to a specified length. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ifb: use the lockless variants of skb_queueChangli Gao
rq and tq are both protected by tx queue lock, so we can simply use the lockless variants of skb_queue. skb_queue_splice_tail_init() is used instead of the open coded and slow one. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ifb: remove unused macro TX_TIMEOUTChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ifb: remove the useless debug statsChangli Gao
These debug stats are not exported, and become useless. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: buffer count imbalanceJan Glauber
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: l3 add vlan hdr in passthru framesFrank Blaschka
OSA l3 mode is hw accelerated VLAN only for IPv4. Take care we add the vlan hdr to a passthru frame in the device driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: support VIPA add/del in offline modeEinar Lueck
Only work through the IP adddress to do list if the card is UP or SOFTSETUP. Enables to configure VIPA add/del in offline mode. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10qeth: support ipv6 query arp cache for HiperSocketsEinar Lueck
Function qeth_l3_arp_query now queries for IPv6 addresses, too, if QETH_QARP_WITH_IPV6 is passed as parameter to the ioctl. HiperSockets and GuestLAN in HiperSockets mode provide corresponding entries. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10net/ipv6/udp.c: fix typo in flush_stack()Jiri Pirko
skb1 should be passed as parameter to sk_rcvqueues_full() here. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ipv6: Fix 'release_it' logic in tcp_v6_get_peer()David S. Miller
We accidently set it to "true" for the case where we are using a route bound peer. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10bridge: Fix return values of br_multicast_add_group/br_multicast_new_groupTobias Klauser
If br_multicast_new_group returns NULL, we would return 0 (no error) to the caller of br_multicast_add_group, which is not what we want. Instead br_multicast_new_group should return ERR_PTR(-ENOMEM) in this case. Also propagate the error number returned by br_mdb_rehash properly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10Merge branch 'dccp' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6David S. Miller
2010-12-10Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2010-12-10Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
2010-12-10dccp: remove unused macrosShan Wei
Remove macros which have been unused since the initial implementation (commit 7c657876b63cb1d8a2ec06f8fc6c37bb8412e66c, [DCCP]: Initial implementation from Tue Aug 9 20:14:34 2005 -0700). Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-12-09bnx2x: Update version number and a date.Vladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09bnx2x: Fixed a compilation warningVladislav Zolotarov
bnx2x_src_init_t2() is used only when BCM_CNIC is defined. So, to avoid a compilation warning, we won't define it unless BCM_CNIC is defined. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09bnx2x: Use dma_alloc_coherent() semantics for ILT memory allocationVladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09bnx2x: LSO code was broken on BE platformsVladislav Zolotarov
Make the LSO code work on BE platforms: parsing_data field of a parsing BD (PBD) for 57712 was improperly composed which made FW read wrong values for TCP header's length and offset and, as a result, the corresponding PCI device was performing bad DMA reads triggering EEH. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09filter: use size of fetched data in __load_pointer()Eric Dumazet
__load_pointer() checks data we fetch from skb is included in head portion, but assumes we fetch one byte, instead of up to four. This wont crash because we have extra bytes (struct skb_shared_info) after head, but this can read uninitialized bytes. Fix this using size of the data (1, 2, 4 bytes) in the test. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09The new jhash implementationJozsef Kadlecsik
The current jhash.h implements the lookup2() hash function by Bob Jenkins. However, lookup2() is outdated as Bob wrote a new hash function called lookup3(). The patch replaces the lookup2() implementation of the 'jhash*' functions with that of lookup3(). You can read a longer comparison of the two and other hash functions at http://burtleburtle.net/bob/hash/doobs.html. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09net: optimize INET input path furtherEric Dumazet
Followup of commit b178bb3dfc30 (net: reorder struct sock fields) Optimize INET input path a bit further, by : 1) moving sk_refcnt close to sk_lock. This reduces number of dirtied cache lines by one on 64bit arches (and 64 bytes cache line size). 2) moving inet_daddr & inet_rcv_saddr at the beginning of sk (same cache line than hash / family / bound_dev_if / nulls_node) This reduces number of accessed cache lines in lookups by one, and dont increase size of inet and timewait socks. inet and tw sockets now share same place-holder for these fields. Before patch : offsetof(struct sock, sk_refcnt) = 0x10 offsetof(struct sock, sk_lock) = 0x40 offsetof(struct sock, sk_receive_queue) = 0x60 offsetof(struct inet_sock, inet_daddr) = 0x270 offsetof(struct inet_sock, inet_rcv_saddr) = 0x274 After patch : offsetof(struct sock, sk_refcnt) = 0x44 offsetof(struct sock, sk_lock) = 0x48 offsetof(struct sock, sk_receive_queue) = 0x68 offsetof(struct inet_sock, inet_daddr) = 0x0 offsetof(struct inet_sock, inet_rcv_saddr) = 0x4 compute_score() (udp or tcp) now use a single cache line per ignored item, instead of two. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09net: Abstract away all dst_entry metrics accesses.David S. Miller
Use helper functions to hide all direct accesses, especially writes, to dst_entry metrics values. This will allow us to: 1) More easily change how the metrics are stored. 2) Implement COW for metrics. In particular this will help us put metrics into the inetpeer cache if that is what we end up doing. We can make the _metrics member a pointer instead of an array, initially have it point at the read-only metrics in the FIB, and then on the first set grab an inetpeer entry and point the _metrics member there. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2010-12-08can: slcan: Add missing linux/sched.h include.David S. Miller
drivers/net/can/slcan.c: In function 'slcan_open': drivers/net/can/slcan.c:568: error: dereferencing pointer to incomplete type Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
2010-12-08tcp: protect sysctl_tcp_cookie_size readsEric Dumazet
Make sure sysctl_tcp_cookie_size is read once in tcp_cookie_size_check(), or we might return an illegal value to caller if sysctl_tcp_cookie_size is changed by another cpu. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: William Allen Simpson <william.allen.simpson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-27 02:24:53 +0000