summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-06-24mac80211: clean up debuggingJohannes Berg
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-22mac80211: pass sdata to some RX functionsJohannes Berg
For better debugging, we would like to have the sdata pointer available later, so pass it into these functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-22mac80211: two small verbose debug cleanupsJohannes Berg
Two instances of CONFIG_MAC80211_VERBOSE_DEBUG should be different, fix them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-22mac80211: remove TKIP debugJohannes Berg
The TKIP code hasn't been changed in a very long time, so it seems unlikely that anyone really has a need for the TKIP debug code. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-21ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFTAvinash Patil
WMM and WPS Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-21mac80211: add command to get current rssiVictor Goldenshtein
Get current rssi (in dBm) from the driver/FW. Instead of reporting the signal received in the last rx packet, which might be inaccurate if rx traffic is low and beacon filtering is enabled, get the signal from the driver/FW. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: fix double-start of remain-on-channelJohannes Berg
When a remain-on-channel item is deleted, we remove it from the list and then start the next item. However, if it wasn't actually the first item then calling ieee80211_start_next_roc() is wrong as it will start the first item -- even if that was already started. Fix the two places that do this and add a warning to prevent the problem from reoccurring. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: Allow userspace to register for auth frames in IBSSWill Hawkins
Set the necessary flags to allow user space applications to register for authentication frames on IBSS interfaces. This is useful for situations where userspace applications want to control key negotiation between stations. Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: send auth in IBSS only if userspace isn't handling itWill Hawkins
Check the auth frame registration count before sending "open system" authentication messages when a new station registers on a particular IBSS network. This stops us from sending out multiple authentication messages with different authentication algorithms. Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: Track auth frame registrations on IBSS ifacesWill Hawkins
Track userspace registrations for authentication frames received on an IBSS interface. This field will be used to decide whether or not to send "open system" authentication frames when a new station joins an adhoc network. Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org> [redesign the code flow a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: fix cleanup if driver suspend callback failsEyal Shapira
In case the driver suspend callback fails, mac80211 is left with stopped queues which prevents any further traffic as well as all STAs are left marked with WLAN_STA_BLOCK_BA which will cause any further ADDBA requests to be declined. Fix it by undoing both before returning from __iee80211_suspend. Reported-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: save wmm_acm per sdataYoni Divinsky
Save and configure the wmm_acm per sdata, rather than per hardware. If wmm_acm is saved per hardware when running two interfaces simultaneously on the same hardware one interface's wmm policy will be affected by the other interface. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: use the correct capability info in ieee80211_set_associated()Luciano Coelho
If an AP is beaconing with different capabilities than the one we get in the associate response, we were still using the capabilities received in the beacons. One example is when the AP is beaconing with the short slot bit set to zero and then we try to connect to it with long slot. In this case, we would keep using long slot until the next beacon was received. Fix this by using the correct capability value when calling ieee80211_handle_bss_capability(). We were using cbss->capability, but we should use the bss_conf->assoc_capability instead. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20cfg80211: fix regression in multi-vif AP startFelix Fietkau
Commit "cfg80211: provide channel to start_ap function" assumes that the channel is always passed to the NL80211_CMD_START_AP command, however in case of multi-BSSID, hostapd only passes the channel for the first vif. This makes starting beaconing on secondary vifs fail with -EINVAL. Fix this by storing the channel provided to .start_ap in wdev->preset_chan and picking the first AP vif's channel for secondary vifs if not provided. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: use __cfg80211_rdev_from_attrs for testmodeJohannes Berg
To fix the testmode cross-namespace access problem, use __cfg80211_rdev_from_attrs() to get the device instead of open-coding similar functionality. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: change __cfg80211_rdev_from_infoJohannes Berg
Change the function to __cfg80211_rdev_from_attrs to take attributes instead of the info struct to make it usable from dump callbacks for testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: fix netns separationJohannes Berg
There are currently a few ways to "escape" the network namespace and access a wiphy that belongs to another namespace. Add a netns argument to the relevant functions to fix this. One remaining issue with testmode will be fixed in a follow-up patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20nl80211: refactor __cfg80211_rdev_from_infoJohannes Berg
Refactor the function to make it easier to extend. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20cfg80211: make some functions staticJohannes Berg
Some of the functions to retrieve a device can be static as they're used only in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: initialize sta pointer to avoid false-positive warningLuciano Coelho
Some compilers (eg. gcc 4.4.1 for ARM) report a false positive warning in mlme.c: net/mac80211/mlme.c: In function 'ieee80211_prep_connection': net/mac80211/mlme.c:3035: warning: 'sta' may be used uninitialized in this function This is a false positive because the place where 'sta' is used is inside an if with the same condition of where it is set: [...] if (!have_sta) { sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); if (!sta) return -ENOMEM; } [...] if (!have_sta) { [...] sta->sta.supp_rates[cbss->channel->band] = rates; [...] For some reason the compiler doesn't understand this and warns. While this is not a problem in the code itself, we can avoid polluting the build logs with false positives by setting sta to NULL on declaration and checking for sta instead of !have_sta in the second if. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: cleanup offchannel_ps_enable argumentRajkumar Manoharan
The 'tell_ap' argument is always true. So that remove it and simplify the function. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: fix and improve mesh RANN processingChun-Yeow Yeoh
This patch fixes the problem of dropping RANN element if the TTL is 1. If the received RANN element TTL is 1 or greater than 1, the RANN is processed. However, forwarding of received RANN element with TTL 1 or less is prohibited according to the standard. This is previously reported by Monthadar Al Jaberi. Besides, this patch also avoid the processing of unicast PREQ generation if the RANN element does not meet the acceptance criteria mentioned in Sec. 13.10.12.4.2 of IEEE Std. 802.11-2012. Reported-by: Monthadar Al Jaberi <monthadar@gmail.com> Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: set only VO as a U-APSD enabled ACArik Nemtsov
Some APs experience problems when working with U-APSD. Decrease the probability of that happening by using legacy mode for all ACs but VO. The AP that caused us troubles was a Cisco 4410N. It ignores our setting, and always treats non-VO ACs as legacy. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: stop Rx during HW reconfigArik Nemtsov
While HW reconfig is in progress, drop all incoming Rx. This prevents incoming packets from changing the internal state of the driver or calling callbacks of the low level driver while it is in inconsistent state. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: fix the assignment of mesh element TTLChun-Yeow Yeoh
This patch fixes the wrong assignment of mesh element TTL. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18{nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationIntervalChun-Yeow Yeoh
As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: invoke the timer only with correct dot11MeshHWMPRootMode valueChun-Yeow Yeoh
mesh_path_root_timer is invoked once the dot11MeshHWMPRootMode is larger than 1. This patch also adds the backward compatible to the previous setting on dot11MeshHWMPRootMode. If the user configures as follow, it will still trigger the proactive RANN with Gate Announcement. iw mesh0 set mesh_param mesh_hwmp_rootmode 1 iw mesh0 set mesh_param mesh_gate_announcements 1 similar to the following setting: iw mesh0 set mesh_param mesh_hwmp_rootmode 4 iw mesh0 set mesh_param mesh_gate_announcements 1 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: implement the proactive PREP generationChun-Yeow Yeoh
Generate the proactive PREP element in Proactive PREQ mode as defined in Sec. 13.10.10.3 (Case D) of IEEE Std. 802.11-2012. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14mac80211: implement the proactive PREQ generationChun-Yeow Yeoh
Generate the proactive PREQ element as defined in Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012 based on the selection of dot11MeshHWMPRootMode as follow: dot11MeshHWMPRootMode (2) is proactivePREQnoPREP dot11MeshHWMPRootMode (3) is proactivePREQwithPREP The proactive PREQ is generated based on the interval defined by dot11MeshHWMProotInterval. With this change, proactive RANN element is now generated if the dot11MeshHWMPRootMode is set to (4) instead of (1). Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14{nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and ↵Chun-Yeow Yeoh
dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13cfg80211/nl80211: fix kernel-docJohannes Berg
Add missing entries to nl80211.h and fix the kernel-doc notation in cfg80211.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13nl80211: fix sched scan match attribute nameJohannes Berg
It should be NL80211_SCHED_SCAN_MATCH_ATTR_SSID as documented, not NL80211_ATTR_SCHED_SCAN_MATCH_SSID. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13mac80211: Disallow changing chan type on monitor when CHAN_MODE_FIXEDPontus Fuchs
If you add a monitor interface in parallel to a normal interface mac80211 will let you to change the channel type on the monitor interface even if you are connected. Add an explicit check to disallow this. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [fix typo in commit log, use sdata instead of netdev] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-13mac80211: allow cancelling dependent ROCsJohannes Berg
In my redesign of remain-on-channel I forgot that an item could be cancelled when it's a dependent item that is part of another item. Allow cancelling such items by removing them from the dependents list. Note that when we cancel the main item, all its dependents are also cancelled. It would be possible to not do that, but would need tricks to promote an item from dependent to top-level and is tricky in the HW ROC case. Reported-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-12ieee80211: definitions for Microsoft Vendor OUI and WPA OUI typeAvinash Patil
Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11mac80211: remove unneeded ieee80211_run_deferred_scan()Johannes Berg
Ilan pointed out to me that ieee80211_start_next_roc() already calls ieee80211_run_deferred_scan() if the list of ROC items is empty, so there's no need to call it again after calling ieee80211_start_next_roc(). Reported-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11{nl,cfg,mac}80211: fix the coding style related to mesh parametersChun-Yeow Yeoh
fix the coding style related to mesh parameters, especially the indentation, as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11cfg80211: add missing kernel-doc for mesh configuration structureChun-Yeow Yeoh
Add the missing kernel-doc for mesh configuration parameters as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09mac80211: Rename stainfo variable for the more common staJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Jason Abele <jason@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09mac80211: Remove unused variableJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Jason Abele <jason@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-08wl18xx: avoid some -Wformat warningsJohn W. Linville
CC drivers/net/wireless/ti/wl18xx/main.o drivers/net/wireless/ti/wl18xx/main.c: In function ‘wl18xx_conf_init’: drivers/net/wireless/ti/wl18xx/main.c:1024:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘long unsigned int’ [-Wformat] drivers/net/wireless/ti/wl18xx/main.c:1024:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Wformat] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-08Merge branch 'wl12xx-next' into for-linvilleLuciano Coelho
2012-06-08wlcore/wl12xx/wl18xx: make NVS file optional for wl18xxArik Nemtsov
Don't spew errors when we can't find the NVS file in wlcore. Instead fail the wl12xx boot HW op if the NVS isn't found. Take this opportunity to remove some dead code from register_hw() which looks for the NVS again needlessly. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wl18xx: clean up phy module parametersArik Nemtsov
Give all wl18xx phy module paramters -1 as a default value, indicating the paramter was not set. Add previous default values to the default 18xx priv conf structure. Remove the board_type field from wl18xx priv. The field with the same name inside the phy conf is good enough for our purposes. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wl18xx: align wl18xx_conf_phy with FW variant and remove itArik Nemtsov
wl18xx_conf_phy represents part of the FW native wl18xx_mac_and_phy_params structure. Remove it and replace the phy part of the wl18xx conf with the FW bound structure. This allows us to set/override all members. Increment the wlconf version to ensure compatibility with the new structure Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wl18xx: update fw statisticsIdo Reis
Aligned to the struct in FW 8.2.0.0.91 and updated the debugfs entries accordingly. Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wl18xx: allow FW-log by default for PG2.0Arik Nemtsov
This is supported by new FW versions (.88+). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wl18xx: read configuration structure from a binary fileLuciano Coelho
Instead of using the hardcoded configuration structure, try to read it from a "firmware" file called wl18xx-conf.bin. If the file doesn't exist, fall back to the hardcoded version. If the file exists but is illegal, bail out. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wlcore/wl18xx: export conf struct in a debugfs fileLuciano Coelho
Add conf file header structure, magic and version values and export the entire conf struct in debugfs. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-06-08wlcore/wl18xx: the conf structs must be packed so they can be exportedLuciano Coelho
Since we are now going to export the conf structure and read it from a file, it should be packed to avoid surprises with padding bytes. Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-25 00:19:49 +0000