summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-03-16Merge branch 'ux500/dt' into next/dt2Arnd Bergmann
* ux500/dt: ARM: ux500: Provide local timer support for Device Tree ARM: ux500: Enable PL022 SSP Controller in Device Tree ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree ARM: ux500: db8500: list most devices in the snowball device tree ARM: ux500: split dts file for snowball into generic part ARM: ux500: combine the board init functions for DT boot ARM: ux500: Initial Device Tree support for Snowball ARM: ux500: CONFIG: Enable Device Tree support for future endeavours ARM: ux500: fix compilation after local timer rework (adds dependency on localtimer branch, irqdomain branch and ux500/soc branch) Conflicts: arch/arm/mach-ux500/devices-common.c This adds patches from Lee Jones, Niklas Hernaeus and myself to provide initial device tree support on the ux500 platform. The pull request from Lee contained some other changes, so I rebased the patches on top of the branches that are actually dependencies for this. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Provide local timer support for Device TreeLee Jones
This enables local timer (AKA: private timer) support for all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable PL022 SSP Controller in Device TreeLee Jones
This SSP Controller supports a number of serial communication methods and as such cannot be registered using of_register_spi_devices. Instead we register it simply as a primecell device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable PL310 Level 2 Cache Controller in Device TreeLee Jones
This provides PL310 Level 2 Cache Controller Device Tree support for all u8500 based devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable PL011 AMBA UART Controller for Device TreeLee Jones
Enables the 3 UARTs found on a u8500 using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device TreeLee Jones
This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: db8500: list most devices in the snowball device treeLee Jones
This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: split dts file for snowball into generic partArnd Bergmann
db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: combine the board init functions for DT bootArnd Bergmann
This lets us move over evertything to device tree one by one. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Initial Device Tree support for SnowballArnd Bergmann
This provides very basic Device Tree support for ST-Ericsson's low-cost development platform, Snowball. If Device Tree for ux500 is enabled and the correct board is configured within the Device Tree blob, the correct *_init_machine() will be called. This patch is based on some original work completed by: Niklas Hernaeus <niklas.hernaeus@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Niklas Hernaeus <niklas.hernaeus@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: CONFIG: Enable Device Tree support for future endeavoursLee Jones
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16Merge branch 'depends/driver-core' into ux500/dtArnd Bergmann
Conflicts: drivers/base/cpu.c
2012-03-16Merge branch 'ux500/soc' into ux500/dtArnd Bergmann
2012-03-16Merge branch 'at91-3.4-cleanup2-DT2+USB' of ↵Arnd Bergmann
git://github.com/at91linux/linux-at91 into next/dt * 'at91-3.4-cleanup2-DT2+USB' of git://github.com/at91linux/linux-at91: ARM: at91: sam9g20 udc add dt support USB: at91: Device udc add dt support
2012-03-16Merge branch 'at91-3.4-cleanup2-DT2' of ↵Arnd Bergmann
git://github.com/at91linux/linux-at91 into next/dt * 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91: (23 commits) ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5 ARM: at91: usb ehci add dt support ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5 ARM: at91: usb ohci add dt support ARM: at91: add Shutdown Controller (SHDWC) DT support ARM: at91: add ram controller DT support ARM: at91: add RSTC (Reset Controller) dt support ARM: at91: always enable sam9 restart ARM: at91: add pmc DT support ARM: at91/dt: add specific DT soc init ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20 ARM: at91: sam9x5 add i2c DT support ARM: at91: sam9g45 add i2c DT support ARM: at91: usb_a9g20 add DT i2c support ARM: at91: sam9g20 add i2c DT support i2c/gpio: add DT support ARM: at91: sam9x5 add nand support atmel/nand: add DT support of/mtd/nand: add generic bindings and helpers of: introduce helper to manage boolean ...
2012-03-16ARM: at91: sam9g20 udc add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-16USB: at91: Device udc add dt supportJean-Christophe PLAGNIOL-VILLARD
Allow to compile it if AT91 is enable. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5Jean-Christophe PLAGNIOL-VILLARD
make the ECHI depends on ARCH_AT91 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: usb ehci add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: usb ohci add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15ARM: at91: add Shutdown Controller (SHDWC) DT supportJean-Christophe PLAGNIOL-VILLARD
Use a string to specific the wakeup mode to make it more readable. Add the Real-time Clock Wake-up support too for sam9g45 and sam9x5. Add AT91_SHDW_CPTWK0_MAX to specific the Max of the Wakeup Counter. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add ram controller DT supportJean-Christophe PLAGNIOL-VILLARD
We can now drop the call to ioremap_registers() as we have the binding for the SDRAM/DDR Controller. Drop ioremap_registers() for sam9x5 too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add RSTC (Reset Controller) dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: always enable sam9 restartJean-Christophe PLAGNIOL-VILLARD
This is need for multiple SoC in the same kernel image and DT. As we will chose the restart function via binding. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add pmc DT supportJean-Christophe PLAGNIOL-VILLARD
Specified the main Oscillator via clock binding. This will allow to do not hardcode it anymore in the DT board at 12MHz. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91/dt: add specific DT soc initJean-Christophe PLAGNIOL-VILLARD
This will allow to have static Device mapping and DT probe mapping for the System Controller. Temporary keep the call to ioremap_registers() until we have the binding for the SDRAM/DDR Controller. Temporary keep the main clock hardcoded to 12MHz until we have the binding for the PMC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20Jean-Christophe PLAGNIOL-VILLARD
http://www.calao-systems.com/articles.php?lng=en&pg=6099 this daughter board add the following device: - Micro-SD socket - TTL 3V3 - (Tx/Rx/RTS/CTS) - I2C port - 0.96" Serial OLED Display Module (over UART) - MP3 decoder with Micro & Speakers - 4x PB, 4x Leds (Blue), 3x Leds (Green, Orange, Red) for now we add only the 2 UARTs, 4 Buttons, 7 leds and i2c via DT used_led1 will not be re-add via DT as it's used by the motherboard too Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-15ARM: at91: sam9x5 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9g45 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: usb_a9g20 add DT i2c supportJean-Christophe PLAGNIOL-VILLARD
Use i2c-gpio and enable rv3029 RTC. Enable the rtc in the sam9g20 defconfig. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9g20 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15i2c/gpio: add DT supportJean-Christophe PLAGNIOL-VILLARD
To achieve DT support, we need to populate a custom platform_data in a private struct from DT information. To simplify code, the adapter and algorithm are also put into the private struct. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9x5 add nand supportJean-Christophe PLAGNIOL-VILLARD
Enable the nand in the cpu module with the partition. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-15atmel/nand: add DT supportJean-Christophe PLAGNIOL-VILLARD
Use a local copy of board informatin and fill with DT data. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15of/mtd/nand: add generic bindings and helpersJean-Christophe PLAGNIOL-VILLARD
- nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stefan Roese <sr@denx.de>
2012-03-15of: introduce helper to manage booleanJean-Christophe PLAGNIOL-VILLARD
of_property_read_bool Search for a property in a device node. Returns true if the property exist false otherwise. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-15ARM: at91: enable on flash bbt for Atmel Reference and DT boardsJean-Christophe PLAGNIOL-VILLARD
Enable it on Calao board too as they are in DT too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-15mtd/atmel_nand: add on_flash_bbt to enable the use of On Flash BBTJean-Christophe PLAGNIOL-VILLARD
This will allow to enable it from the board. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: David Woodhouse <dwmw2@infradead.org>
2012-03-15ATMEL: fix nand ecc supportJean-Christophe PLAGNIOL-VILLARD
So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc and hardware). Set ecc mode in the boards to soft as currently in the driver. Move platform data to a common header include/linux/platform_data/atmel_nand.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: David Woodhouse <dwmw2@infradead.org>
2012-03-15Merge branch 'local_timers-for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into next/timer * 'local_timers-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms: ARM: ux500: fix compilation after local timer rework
2012-03-15ARM: ux500: fix compilation after local timer reworkMarc Zyngier
mach-ux500/timer.c lacked the inclusion of mach/irqs.h, and thus failed to compile. Fix it and also remove an unused variable. Test compiled only. Reported-by: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergman <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13Merge branch 'local_timers-for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into next/timer * 'local_timers-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms: ARM: local timers: make the runtime registration interface mandatory ARM: local timers: convert MSM to runtime registration interface ARM: local timers: convert exynos to runtime registration interface ARM: smp_twd: remove old local timer interface ARM: imx6q: convert to twd_local_timer_register() interface ARM: highbank: convert to twd_local_timer_register() interface ARM: ux500: convert to twd_local_timer_register() interface ARM: shmobile: convert to twd_local_timer_register() interface ARM: tegra: convert to twd_local_timer_register() interface ARM: plat-versatile: convert to twd_local_timer_register() interface ARM: OMAP4: convert to twd_local_timer_register() interface ARM: smp_twd: add device tree support ARM: smp_twd: add runtime registration support ARM: local timers: introduce a new registration interface ARM: smp_twd: make local_timer_stop a symbol instead of a #define
2012-03-13ARM: local timers: make the runtime registration interface mandatoryMarc Zyngier
Remove all traces of the compile-time local timer interface, and make the runtime selection mandatory. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: local timers: convert MSM to runtime registration interfaceMarc Zyngier
Convert the MSM timers to the runtime registration interface. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: local timers: convert exynos to runtime registration interfaceMarc Zyngier
Convert the Exynos MCT timers to the runtime registration interface. Tested on Origen. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: smp_twd: remove old local timer interfaceMarc Zyngier
Now that all users of the previous local timer interface have been converted to the runtime registration API, make this interface the only one supported for this driver. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: imx6q: convert to twd_local_timer_register() interfaceMarc Zyngier
Add support for the new smp_twd runtime registration interface to the imx6q platforms, and remove the old compile-time support. The imx6q DTS file is updated to match the TWD DT documentation. Also present in this patch a DTS fix to the timer interrupt routing (the PPI connection uses bits [15:8]) and trigger (rising edge). Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: highbank: convert to twd_local_timer_register() interfaceMarc Zyngier
Add support for the new smp_twd runtime registration interface to the highbank platforms, and remove the old compile-time support. The highbank DTS file is updated to match the TWD DT documentation and fixes the timer trigger (rising edge). Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: ux500: convert to twd_local_timer_register() interfaceMarc Zyngier
Add support for the new smp_twd runtime registration interface to the ux500 platforms, and remove the old compile-time support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-26 10:16:10 +0000