summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-07-27atmel-mci: debugfs supportHaavard Skinnemoen
Create additional files under the host's debugfs directory containing additional host-specific debug information. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Add per-card debugfs supportHaavard Skinnemoen
For each card successfully added to the bus, create a subdirectory under the host's debugfs root with information about the card. At the moment, only a single file is added to the card directory for all cards: "state". It reflects the "state" field in struct mmc_card, indicating whether the card is present, readonly, etc. For MMC and SD cards (not SDIO), another file is added: "status". Reading this file will ask the card about its current status and return it. This can be useful if the card just refuses to respond to any commands, which might indicate that the card state is not what the MMC core thinks it is (due to a missing stop command, for example.) Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Export internal host state through debugfsHaavard Skinnemoen
When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug containing information about an mmc host's internal state. Currently, just a single file is created, "ios", which contains information about the current operating parameters for the bus (clock speed, bus width, etc.) Host drivers can add additional files and directories under the host's root directory by passing the debugfs_root field in struct mmc_host as the 'parent' parameter to debugfs_create_*. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: fix crash when no platform data is providedPaulius Zaleckas
Don't crash if no platform data is provided. In this case assume that card is present. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: fix platform resourcesPaulius Zaleckas
Fixup platform resources handling. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: remove DEBUG definitionPaulius Zaleckas
Removed DEBUG #define #undef, because module is automaticaly compiled with -DDEBUG when CONFIG_MMC_DEBUG is defined. Currently it just generates compiler warning about redefinition. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-24mmc_spi: put signals to low power off fixJan Nikitenko
The original intention was to write a zero byte to mmc to force spi signals to low when doing power off. Somehow the spi_w8r8 call got there so a read followed the write of single zero byte. This patch changes that to simple write of zero byte without the following read. This way the power off is more reliable and completely sufficient. Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: highmem capable PIO routines sg: reimplement sg mapping iterator mmc_test: print message when attaching to card mmc: Remove Russell as primecell mci maintainer mmc_block: bounce buffer highmem support sdhci: fix bad warning from commit c8b3e02 sdhci: add warnings for bad buffers in ADMA path mmc_test: test oversized sg lists mmc_test: highmem tests s3cmci: ensure host stopped on machine shutdown au1xmmc: suspend/resume implementation s3cmci: fixes for section mismatch warnings pxamci: trivial fix of DMA alignment register bit clearing
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits) I/OAT: I/OAT version 3.0 support I/OAT: tcp_dma_copybreak default value dependent on I/OAT version I/OAT: Add watchdog/reset functionality to ioatdma iop_adma: cleanup iop_chan_xor_slot_count iop_adma: document how to calculate the minimum descriptor pool size iop_adma: directly reclaim descriptors on allocation failure async_tx: make async_tx_test_ack a boolean routine async_tx: remove depend_tx from async_tx_sync_epilog async_tx: export async_tx_quiesce async_tx: fix handling of the "out of descriptor" condition in async_xor async_tx: ensure the xor destination buffer remains dma-mapped async_tx: list_for_each_entry_rcu() cleanup dmaengine: Driver for the Synopsys DesignWare DMA controller dmaengine: Add slave DMA interface dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap dmaengine: Add dma_client parameter to device_alloc_chan_resources dmatest: Simple DMA memcpy test client dmaengine: DMA engine driver for Marvell XOR engine iop-adma: fix platform driver hotplug/coldplug dmaengine: track the number of clients using a channel ... Fixed up conflict in drivers/dca/dca-sysfs.c manually
2008-07-23Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: kgdboc console poll hooks for mpsc uart kgdb: kgdboc console poll hooks for cpm uart kgdb, powerpc: arch specific powerpc kgdb support kgdb: support for ARCH=arm kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable
2008-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (60 commits) ide: small whitespace fixes ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings ide: ide-cd.c fix sparse endianness warnings ide-cd: convert to using the new atapi_flags ide: remove unused PC_FLAG_DRQ_INTERRUPT ide-scsi: convert to using the new atapi_flags ide-tape: convert to using the new atapi_flags ide-floppy: convert to using the new atapi_flags (take 2) ide: add per-device flags ide: use rq->cmd instead of pc->c in atapi common code ide-scsi: pass packet command in rq->cmd ide-tape: pass packet command in rq->cmd ide-tape: make room for packet command ids in rq->cmd ide-floppy: pass packet command in rq->cmd ide: remove pc->callback member from ide_atapi_pc ide-scsi: use drive->pc_callback instead of pc->callback ide-tape: use drive->pc_callback instead of pc->callback ide-floppy: use drive->pc_callback instead of pc->callback ide: push pc callback pointer into the ide_drive_t structure drivers/ide/ide-tape.c: remove double kfree ...
2008-07-23ide: small whitespace fixesPavel Machek
Small whitespace fixes for drivers/ide. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warningsHarvey Harrison
The function ide_cd_queue_pc should be checked as the bufflen arg is dereferenced and lots of callers are passing in NULL. drivers/ide/ide-cd_ioctl.c:124:46: warning: Using plain integer as NULL pointer drivers/ide/ide-cd_ioctl.c:149:47: warning: Using plain integer as NULL pointer drivers/ide/ide-cd_ioctl.c:231:46: warning: Using plain integer as NULL pointer drivers/ide/ide-cd_ioctl.c:374:46: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: ide-cd.c fix sparse endianness warningsHarvey Harrison
drivers/ide/ide-cd.c:1276:46: warning: Using plain integer as NULL pointer drivers/ide/ide-cd.c:1298:19: warning: cast to restricted __be32 drivers/ide/ide-cd.c:1300:4: warning: cast to restricted __be32 drivers/ide/ide-cd.c:1522:14: warning: cast to restricted __le16 drivers/ide/ide-cd.c:1523:14: warning: cast to restricted __le16 drivers/ide/ide-cd.c:1525:14: warning: cast to restricted __be16 drivers/ide/ide-cd.c:1526:14: warning: cast to restricted __be16 drivers/ide/ide-cd.c:1667:37: warning: cast to restricted __be16 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-cd: convert to using the new atapi_flagsBorislav Petkov
There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove unused PC_FLAG_DRQ_INTERRUPTBorislav Petkov
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-scsi: convert to using the new atapi_flagsBorislav Petkov
Remove unused IDESCSI_PC_RQ while at it. There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: convert to using the new atapi_flagsBorislav Petkov
There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-floppy: convert to using the new atapi_flags (take 2)Borislav Petkov
while at it, remove PC_FLAG_ZIP_DRIVE from the packed command flags altogether and query the drive type through drive->atapi_flags. v2: ide-floppy fix. There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add per-device flagsBorislav Petkov
Push device flags up into ide_drive_t. There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: use rq->cmd instead of pc->c in atapi common codeBorislav Petkov
There should be no functionality change resulting from this patch. [bart: s/HWGROUP(drive)/hwif->hwgroup/] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-scsi: pass packet command in rq->cmdBorislav Petkov
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: pass packet command in rq->cmdBorislav Petkov
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: make room for packet command ids in rq->cmdBorislav Petkov
ide-tape uses rq->cmd for special commands from the chrdev interface so move those to byte 13 (BLK_MAX_CDB = 16) since a packet cmd is max 12 bytes. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-floppy: pass packet command in rq->cmdBorislav Petkov
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove pc->callback member from ide_atapi_pcBorislav Petkov
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-scsi: use drive->pc_callback instead of pc->callbackBorislav Petkov
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: use drive->pc_callback instead of pc->callbackBorislav Petkov
The if-else block in the IRQ handler is only temporary so that bisect searches don't break and it'll be removed after converting the remainder of the drivers. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-floppy: use drive->pc_callback instead of pc->callbackBorislav Petkov
It is important that drive->pc_callback is set prior to enabling IRQs on the device since this is called from the IRQ handler. Otherwise it hurts as I learnt the hard way from the several "Kernel panic - not synching: Fatal exception in interrupt" during the weekend :). The if-else block in the IRQ handler is only temporary so that bisect searches don't break and it'll be removed after converting the remainder of the drivers. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: push pc callback pointer into the ide_drive_t structureBorislav Petkov
Refrain from carrying the callback ptr with every packet command since the callback function is only one anyways. ide_drive_t is probably not the most suitable place for it right now but is the more sane solution. Besides, these structs are going to be reorganized anyways during the generic ide rewrite. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23drivers/ide/ide-tape.c: remove double kfreeDarren Jenkins
Coverity CID: 2336 USE_AFTER_FREE drivers/ide/ide-tape.c ide_tape_kfree_buffer() double free's a pointer (hint freed by an alias in first outer loop). This patch simply removes the superfluous kfree(). Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: gadio@netvision.net.il Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_host_free() helper (take 2)Bartlomiej Zolnierkiewicz
* Add ide_host_free() helper and convert ide_host_remove() to use it. * Fix handling of ide_host_register() failure in ide_host_add(), icside.c, ide-generic.c, falconide.c and sgiioc4.c. While at it: * Fix handling of ide_host_alloc_all() failure in ide-generic.c. * Fix handling of ide_host_alloc() failure in falconide.c (also return the correct error value if no device is found). v2: * falconide build fix. (From Stephen Rothwell) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: allocate ide_hwif_t instances dynamicallyBartlomiej Zolnierkiewicz
* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[]. This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10): text data bss dec hex filename 9140 40 14084 23264 5ae0 drivers/ide/ide-probe.o.before 9169 40 44 9253 2425 drivers/ide/ide-probe.o.after * Remove no longer needed ide_init_port_data() call from ide_unregister(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_ports[]Bartlomiej Zolnierkiewicz
* Add ide_ports[] table keeping pointers to all initialized ports. * Set ide_ports[] entry for a given port in init_irq() and clear it ide_remove_port_from_hwgroup(). * Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for grouping ports into hwgroup. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: move ide_remove_port_from_hwgroup() to ide-probe.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: fix IDE port slots reservation and freeing (take 2)Bartlomiej Zolnierkiewicz
* Make ide_find_port_slot() return port slot index. * Add ide_free_port_slot() helper. * Move ide_init_port_data() call and error printk() from ide_find_port_slot() to ide_host_alloc_all(). * Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex and convert them use ide_indexes bitmap to keep track of reserved port slots. * Don't set hwif->chipset in ide_host_alloc_all() as it is no longer necessary. v2: * Pass the correct slot index to ide_init_port_data(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: fix ide_host_register() return valueBartlomiej Zolnierkiewicz
Fix ide_host_register() to fail only if all ports cannot be registered. While at it: * Use host->ports[] instead of ide_hwifs[] and remove idx[]. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_host_add() helperBartlomiej Zolnierkiewicz
Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_host (take 3)Bartlomiej Zolnierkiewicz
* Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_tp_ops (take 2)Bartlomiej Zolnierkiewicz
* Add struct ide_tp_ops for transport methods. * Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info and ide_hwif_t. * Set the default hwif->tp_ops in ide_init_port_data(). * Set host driver specific hwif->tp_ops in ide_init_port(). * Export ide_exec_command(), ide_read_status(), ide_read_altstatus(), ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}() and ata_{in,out}put_data(). * Convert host drivers and core code to use struct ide_tp_ops. * Remove no longer needed default_hwif_transport(). * Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops. While at it: * Use struct ide_port_info in falconide.c and q40ide.c. * Rename ata_{in,out}put_data() to ide_{in,out}put_data(). v2: * Fix missing convertion in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add 'config' field to hw_regs_tBartlomiej Zolnierkiewicz
Add 'config' field to hw_regs_t and use it to set hwif->config_data in ide_init_port_hw(), then convert ide_legacy_init_one() to use hw->config. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-generic: probing fixBartlomiej Zolnierkiewicz
* Don't skip probing IDE port if the corresponding ide_hwifs[] slot is already occupied. * Remove duplicate idx[i] assignment. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23gayle: reserve memory resources at onceBartlomiej Zolnierkiewicz
* Reserve memory resources for all IDE ports at once by moving request_mem_region() out of 'for ()' loop and always defining GAYLE_IDEREG_SIZE to 0x2000. * Keep memory resources even if no free IDE slots can be found (this driver is unloadable currently). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: filter out "default" transfer mode values in set_xfer_rate()Bartlomiej Zolnierkiewicz
* Filter out "default" transfer mode values (0x00 - default PIO mode, 0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted /proc/ide/hd?/settings:current_speed setting. Allowing "default" transfer mode values is a dangerous thing to do as we don't support programming controller to the "default" transfer mode and devices often use different values for the default and maximum PIO mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay programmed for higher PIO mode while device will use the lower PIO mode. There is no functionality loss as by using special IOCTLs device can still be programmed to "default" transfer modes (it is only useful for debugging/testing purposes anyway). * Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was previously used by few host drivers to program the controller to PIO0 timings for "default" transfer mode == 0x01 (although some host drivers would program invalid PIO timings instead). * Cleanup ide_set_xfer_rate() and add BUG_ON(). Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: filter out invalid transfer mode values in set_xfer_rate()Bartlomiej Zolnierkiewicz
Filter out invalid transfer mode values (0x02-0x07) in write handler for obsoleted /proc/ide/hd?/settings:current_speed setting. While at it: * Use XFER_UDMA_6 define. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove dead Virtual DMA supportBartlomiej Zolnierkiewicz
Lets remove dead Virtual DMA support for now so it doesn't clutter core IDE code (it can be bring back when there is a need for it): * Remove IDE_HFLAG_VDMA host flag. * Remove ide_drive_t.vdma flag. * cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops (also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA). There should be no functional changes caused by this patch. Cc: TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: mark hpt34x host driver as BROKENBartlomiej Zolnierkiewicz
Alan Cox has noticed some time ago that hpt34x is broken (http://lkml.org/lkml/2007/7/3/257): "No the old driver doesn't even do that. It starts up. It spuriously adjusts some non writable PCI BAR registers, prints a message about resources being in use already then exits." Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: limit cy82c693 host driver to ALPHABartlomiej Zolnierkiewicz
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove ->INB, ->OUTB and ->OUTBSYNC methodsBartlomiej Zolnierkiewicz
* Remove no longer needed ->INB, ->OUTB and ->OUTBSYNC methods. Then: * Remove no longer used default_hwif_[mm]iops() and ide_[mm_]outbsync(). * Cleanup SuperIO handling in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_read_bcount_and_ireason() helperBartlomiej Zolnierkiewicz
Add ide_read_bcount_and_ireason() helper and use it instead of ->INB in {cdrom_newpc,ide_pc}_intr(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 01:27:38 +0000