summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-11-19X25: remove bkl in routing ioctlsandrew hendry
Routing doesn't use the socket data and is protected by x25_route_list_lock Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19X25: remove bkl in inq and outq ioctlsandrew hendry
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19X25: remove bkl in timestamp ioctlsandrew hendry
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19X25: pushdown bkl in ioctlsandrew hendry
Push down the bkl in the ioctls so they can be removed one at a time. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19filter: use reciprocal divideEric Dumazet
At compile time, we can replace the DIV_K instruction (divide by a constant value) by a reciprocal divide. At exec time, the expensive divide is replaced by a multiply, a less expensive operation on most processors. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19filter: cleanup codes[] initEric Dumazet
Starting the translated instruction to 1 instead of 0 allows us to remove one descrement at check time and makes codes[] array init cleaner. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19filter: optimize sk_run_filterEric Dumazet
Remove pc variable to avoid arithmetic to compute fentry at each filter instruction. Jumps directly manipulate fentry pointer. As the last instruction of filter[] is guaranteed to be a RETURN, and all jumps are before the last instruction, we dont need to check filter bounds (number of instructions in filter array) at each iteration, so we remove it from sk_run_filter() params. On x86_32 remove f_k var introduced in commit 57fe93b374a6b871 (filter: make sure filters dont read uninitialized memory) Note : We could use a CONFIG_ARCH_HAS_{FEW|MANY}_REGISTERS in order to avoid too many ifdefs in this code. This helps compiler to use cpu registers to hold fentry and A accumulator. On x86_32, this saves 401 bytes, and more important, sk_run_filter() runs much faster because less register pressure (One less conditional branch per BPF instruction) # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 2948 0 0 2948 b84 net/core/filter.o 3349 0 0 3349 d15 net/core/filter_pre.o on x86_64 : # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 5173 0 0 5173 1435 net/core/filter.o 5224 0 0 5224 1468 net/core/filter_pre.o Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18can: EG20T PCH: use BIT(X)Tomoya
Replace bit assignment value to BIT(X). For easy to readable/identifiable, replace all bit assigned macros to BIT(X) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18can: EG20T PCH: add prefix to macroTomoya
For easy to readable/identifiable, add prefix "PCH_" to all of #define macros. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18atm: fore200e: Fix build warning.David S. Miller
GCC (rightfully) complains that: drivers/atm/fore200e.c:614:5: warning: operation on 'cmdq->head' may be undefined This is due to the FORE200E_NEXT_ENTRY macro, which essentially evaluates to: i = ++i % m Make it what's explicitly intended here which is: i = (i + 1) % m and the warning goes away. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18igmp: refine skb allocationsEric Dumazet
IGMP allocates MTU sized skbs. This may fail for large MTU (order-2 allocations), so add a fallback to try lower sizes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: move definitions of BPF_S_* to net/core/filter.cChangli Gao
BPF_S_* are used internally, should not be exposed to the others. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18filter: Optimize instruction revalidation code.Tetsuo Handa
Since repeating u16 value to u8 value conversion using switch() clause's case statement is wasteful, this patch introduces u16 to u8 mapping table and removes most of case statements. As a result, the size of net/core/filter.o is reduced by about 29% on x86. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: add priority field to pktgenJohn Fastabend
Add option to set skb priority to pktgen. Useful for testing QOS features. Also by running pktgen on the vlan device the qdisc on the real device can be tested. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18dccp ccid-2: whitespace fix-upGerrit Renker
This fixes whitespace noise introduced in commit "dccp ccid-2: Algorithm to update buffer state", 5753fdfe8bd8e9a2ff9e5af19b0ffc78bfcd502a, 14 Nov 2010. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18bonding: IGMP handling cleanupEric Dumazet
Instead of iterating in_dev->mc_list from bonding driver, its better to call a helper function provided by igmp.c Details of implementation (locking) are private to igmp code. ip_mc_rejoin_group(struct ip_mc_list *im) becomes ip_mc_rejoin_groups(struct in_device *in_dev); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17net: ipv4: tcp_probe: cleanup snprintf() useVasiliy Kulikov
snprintf() returns number of bytes that were copied if there is no overflow. This code uses return value as number of copied bytes. Theoretically format string '%lu.%09lu %pI4:%u %pI4:%u %d %#x %#x %u %u %u %u\n' may be expanded up to 163 bytes. In reality tv.tv_sec is just few bytes instead of 20, 2 ports are just 5 bytes each instead of 10, length is 5 bytes instead of 10. The rest is an unstrusted input. Theoretically if tv_sec is big then copy_to_user() would overflow tbuf. tbuf was increased to fit in 163 bytes. snprintf() is used to follow return value semantic. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17net: zero kobject in rx_queue_releaseJohn Fastabend
netif_set_real_num_rx_queues() can decrement and increment the number of rx queues. For example ixgbe does this as features and offloads are toggled. Presumably this could also happen across down/up on most devices if the available resources changed (cpu offlined). The kobject needs to be zero'd in this case so that the state is not preserved across kobject_put()/kobject_init_and_add(). This resolves the following error report. ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong. Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169 Call Trace: [<ffffffff8121c940>] kobject_init+0x3a/0x83 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57 [<ffffffff8107b800>] ? mark_lock+0x21/0x267 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe] [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe] [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe] Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17net: use the macros defined for the members of flowiChangli Gao
Use the macros defined for the members of flowi to clean the code up. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17net: more Kconfig whitespace cleanupPhilippe De Muyter
indentation for TSI108_ETH entry was too big. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/can/sja1000: Use printf extension %pR for struct resourceJoe Perches
Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/vxge/vxge-main.c: Remove unnecessary casts of pci_get_drvdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/s2io.c: Remove unnecessary casts of pci_get_drvdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Bumped up driver version to 5.0.12Anirban Chakraborty
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: lro off message log from set rx checsumSony Chacko
Log LRO off message while disabling rx checksum only when LRO is already enabled. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Add description for CN1000Q adapterSritej Velaga
Add description for CN1000Q adapter Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Fix for kdumpRajesh Borundia
In case of kdump environment the function may be in unknown state. Reset the function using PCI FLR before initializing it. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Allow minimum bandwidth of zeroSucheta Chakraborty
Allow minimum bandwidth to be set zero Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17ipv6: AF_INET6 link address familyThomas Graf
IPv6 already exposes some address family data via netlink in the IFLA_PROTINFO attribute if RTM_GETLINK request is sent with the address family set to AF_INET6. We take over this format and reuse all the code. Signed-off-by: Thomas Graf <tgraf@infradead.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17ipv4: AF_INET link address familyThomas Graf
Implements the AF_INET link address family exposing the per device configuration settings via netlink using the attribute IFLA_INET_CONF. The format of IFLA_INET_CONF differs depending on the direction the attribute is sent. The attribute sent by the kernel consists of a u32 array, basically a 1:1 copy of in_device->cnf.data[]. The attribute expected by the kernel must consist of a sequence of nested u32 attributes, each representing a change request, e.g. [IFLA_INET_CONF] = { [IPV4_DEVCONF_FORWARDING] = 1, [IPV4_DEVCONF_NOXFRM] = 0, } libnl userspace API documentation and example available from: http://www.infradead.org/~tgr/libnl/doc-git/group__link__inet.html Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17inet: Define IPV4_DEVCONF_MAXThomas Graf
Define IPV4_DEVCONF_MAX to get rid of MAX - 1 notation. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17rtnetlink: Link address family APIThomas Graf
Each net_device contains address family specific data such as per device settings and statistics. We already expose this data via procfs/sysfs and partially netlink. The netlink method requires the requester to send one RTM_GETLINK request for each address family it wishes to receive data of and then merge this data itself. This patch implements a new API which combines all address family specific link data in a new netlink attribute IFLA_AF_SPEC. IFLA_AF_SPEC contains a sequence of nested attributes, one for each address family which in turn defines the structure of its own attribute. Example: [IFLA_AF_SPEC] = { [AF_INET] = { [IFLA_INET_CONF] = ..., }, [AF_INET6] = { [IFLA_INET6_FLAGS] = ..., [IFLA_INET6_CONF] = ..., } } The API also allows for address families to implement a function which parses the IFLA_AF_SPEC attribute sent by userspace to implement address family specific link options. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17clarify documentation for net.ipv4.igmp_max_membershipsJeremy Eder
This patch helps clarify documentation for net.ipv4.igmp_max_memberships by providing a formula for calculating the maximum number of multicast groups that can be subscribed to, plus defining the theoretical limit. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeremy Eder <jeder@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/isdn/hisax: Add printf format/argument verification and fix falloutJoe Perches
Add __attribute__((format... to several functins Make formats and arguments match. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17SELinux: return -ECONNREFUSED from ip_postroute to signal fatal errorEric Paris
The SELinux netfilter hooks just return NF_DROP if they drop a packet. We want to signal that a drop in this hook is a permanant fatal error and is not transient. If we do this the error will be passed back up the stack in some places and applications will get a faster interaction that something went wrong. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17network: tcp_connect should return certain errors up the stackEric Paris
The current tcp_connect code completely ignores errors from sending an skb. This makes sense in many situations (like -ENOBUFFS) but I want to be able to immediately fail connections if they are denied by the SELinux netfilter hook. Netfilter does not normally return ECONNREFUSED when it drops a packet so we respect that error code as a final and fatal error that can not be recovered. Based-on-patch-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17netfilter: allow hooks to pass error code back up the stackEric Paris
SELinux would like to pass certain fatal errors back up the stack. This patch implements the generic netfilter support for this functionality. Based-on-patch-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17net/atm: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/vxge: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/usb: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/qlge: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/qla3xxx.c: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/pcmcia: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/net/bonding: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17drivers/isdn/i4l: Remove unnecessary casts of netdev_privJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2010-11-16e1000e: add netpoll support for MSI/MSI-X IRQ modesDongdong Deng
With enabling CONFIG_PCI_MSI, e1000e could work in MSI/MSI-X IRQ mode, and netpoll controller didn't deal with those IRQ modes on e1000e. This patch add the handling MSI/MSI-X IRQ modes to netpoll controller, so that netconsole could work with those IRQ modes. Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-11-16e1000e: 82574 intermittently fails to initialize with manageability f/wBruce Allan
The driver can fail initializing the hardware when manageability firmware is performing concurrent MDIO operations because the hardware semaphore scheme to prevent concurrent operations between software and firmware is incorrect for 82574/82583. Instead of using the SWSM register, the driver should be using the EXTCNF_CTRL register. A software mutex is also added to prevent simultaneous software threads from performing similar concurrent accesses. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-11-16e1000e: 82571 SerDes link handle null code word from partnerBruce Allan
SerDes Link detection on certain 82571 mezzanine cards can fail when the link is forced, the link partner does not recognize forced link and the link partner sends null code words. Detect the null code words and return to auto-negotiation state which causes the link partner to begin responding with valid code words. Within a reasonable interval the link will finally settle as forced by both partners. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 18:39:34 +0000