| Age | Commit message (Collapse) | Author |
|---|
|
Doing a 'cat /sys/kernel/debug/audmux/ssi7' causes the following oops to be printed by the kernel:
Uhandled fault: external abort on non-linefetch (0x008) at 0xf53b003c
Internal error: : 8 [#1] PREEMPT
Modules linked in:
CPU: 0 Not tainted (3.3.0-00033-gecc726e-dirty #307)
PC is at audmux_read_file+0x68/0x2f4
LR is at clk_enable+0x3c/0x48
pc : [<c001b8c8>] lr : [<c00190a0>] psr: a0000013
sp : c3ad3f38 ip : c30a4000 fp : 00000003
r10: 00001000 r9 : be83fb00 r8 : c3ad3f80
r7 : c3ad3f80 r6 : 00000007 r5 : 00031010 r4 : c30a5000
r3 : f53b0000 r2 : 0000003c r1 : 380fa100 r0 : c068dda0
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 0005317f Table: 83034000 DAC: 00000015
Process cat (pid: 1042, stack limit = 0xc3ad2270)
Stack: (0xc3ad3f38 to 0xc3ad4000)
3f20: c3139180 00000000
3f40: c3bc6500 00001000 be83fb00 c3ad3f80 00001000 c3ad2000 00000000 c0095f3c
3f60: 00000003 c3bc6508 c3bc6500 be83fb00 00000000 00000000 00001000 c0096010
3f80: 00000000 00000000 b6fe2050 00000000 00001000 be83fb00 00000003 00000003
3fa0: c000eb88 c000e9e0 00001000 be83fb00 00000003 be83fb00 00001000 00000000
3fc0: 00001000 be83fb00 00000003 00000003 00000001 00000001 00000000 00000003
3fe0: 000bec8c be83fae0 0000f808 b6ea8d5c 60000010 00000003 7dff7ede 749bedf1
[<c001b8c8>] (audmux_read_file+0x68/0x2f4) from [<c0095f3c>] (vfs_read+0xb0/0x144)
[<c0095f3c>] (vfs_read+0xb0/0x144) from [<c0096010>] (sys_read+0x40/0x70)
[<c0096010>] (sys_read+0x40/0x70) from [<c000e9e0>] (ret_fast_syscall+0x0/0x2c)
Code: e1a02186 e2822004 e3500000 e7935186 (e7937002)
---[ end trace 4d046e31309023de ]---
Fix the ssi port numbers in sysfs to fix this problem.
Reported-by: Joan Carles <joancarles@fqingenieria.es>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute.
But current settings didn't care +1 step for mute.
This patch adds it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
|
|
Rather than listing every single person who works on the drivers include
the mailing list where they can all be found. Leave myself as a human
contact.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Peter Ujfalusi has been co-maintaining sound/soc/omap/ for years but
was missing from this MAINTAINERS entry.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
* fixes
sound/soc/pxa/pxa2xx-i2s.c:86:2: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]
sound/soc/pxa/pxa2xx-i2s.c:86:2: error: initializer element is not constant
after 23019a733bb83c8499f192fb428b7e6e81c95a34 removed IOMEM
definition from arch/arm/mach-pxa/include/mach/hardware.h
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Debugfs files could be accessed any time, so explicitly enable clocks
when reading registers to generate debugfs file content.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
As manual described, VAG is an internal voltage reference of DAC/ADC,
So enabled it before DAC/ADC up.
One more thing should care about is VAG fully ramped down requires 400ms,
wait it to avoid pop.
Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console
Pull virtio S3 support patches from Amit Shah:
"Turns out S3 is not different from S4 for virtio devices: the device
is assumed to be reset, so the host and guest state are to be assumed
to be out of sync upon resume. We handle the S4 case with exactly the
same scenario, so just point the suspend/resume routines to the
freeze/restore ones.
Once that is done, we also use the PM API's macro to initialise the
sleep functions.
A couple of cleanups are included: there's no need for special thaw
processing in the balloon driver, so that's addressed in patches 1 and
2.
Testing: both S3 and S4 support have been tested using these patches
using a similar method used earlier during S4 patch development: a
guest is started with virtio-blk as the only disk, a virtio network
card, a virtio-serial port and a virtio balloon device. Ping from
guest to host, dd /dev/zero to a file on the disk, and IO from the
host on the virtio-serial port, all at once, while exercising S4 and
S3 (separately) were tested. They all continue to work fine after
resume. virtio balloon values too were tested by inflating and
deflating the balloon."
Pulling from Amit, since Rusty is off getting married (and presumably
shaving people).
* 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console:
virtio-pci: switch to PM ops macro to initialise PM functions
virtio-pci: S3 support
virtio-pci: drop restore_common()
virtio: drop thaw PM operation
virtio: balloon: Allow stats update after restore from S4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second try at vfs part d#2 from Al Viro:
"Miklos' first series (with do_lookup() rewrite split into edible
chunks) + assorted bits and pieces.
The 'untangling of do_lookup()' series is is a splitup of what used to
be a monolithic patch from Miklos, so this series is basically "how do
I convince myself that his patch is correct (or find a hole in it)".
No holes found and I like the resulting cleanup, so in it went..."
Changes from try 1: Fix a boot problem with selinux, and commit messages
prettied up a bit.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
vfs: fix out-of-date dentry_unhash() comment
vfs: split __lookup_hash
untangling do_lookup() - take __lookup_hash()-calling case out of line.
untangling do_lookup() - switch to calling __lookup_hash()
untangling do_lookup() - merge d_alloc_and_lookup() callers
untangling do_lookup() - merge failure exits in !dentry case
untangling do_lookup() - massage !dentry case towards __lookup_hash()
untangling do_lookup() - get rid of need_reval in !dentry case
untangling do_lookup() - eliminate a loop.
untangling do_lookup() - expand the area under ->i_mutex
untangling do_lookup() - isolate !dentry stuff from the rest of it.
vfs: move MAY_EXEC check from __lookup_hash()
vfs: don't revalidate just looked up dentry
vfs: fix d_need_lookup/d_revalidate order in do_lookup
ext3: move headers to fs/ext3/
migrate ext2_fs.h guts to fs/ext2/ext2.h
new helper: ext2_image_size()
get rid of pointless includes of ext2_fs.h
ext2: No longer export ext2_fs.h to user space
mtdchar: kill persistently held vfsmount
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq()
sched: Fix __schedule_bug() output when called from an interrupt
sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates and fixes from Ingo Molnar:
"It's mostly fixes, but there's also two late items:
- preliminary GTK GUI support for perf report
- PMU raw event format descriptors in sysfs, to be parsed by tooling
The raw event format in sysfs is a new ABI. For example for the 'CPU'
PMU we have:
aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/*
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc
-r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask
those lists of fields contain a specific format:
aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp
config1:0-63
So, those who wish to specify raw events can now use the following
event format:
-e cpu/cmask=1,event=2,umask=3
Most people will not want to specify any events (let alone raw
events), they'll just use whatever default event the tools use.
But for more obscure PMU events that have no cross-architecture
generic events the above syntax is more usable and a bit more
structured than specifying hex numbers."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
perf tools: Remove auto-generated bison/flex files
perf annotate: Fix off by one symbol hist size allocation and hit accounting
perf tools: Add missing ref-cycles event back to event parser
perf annotate: addr2line wants addresses in same format as objdump
perf probe: Finder fails to resolve function name to address
tracing: Fix ent_size in trace output
perf symbols: Handle NULL dso in dso__name_len
perf symbols: Do not include libgen.h
perf tools: Fix bug in raw sample parsing
perf tools: Fix display of first level of callchains
perf tools: Switch module.h into export.h
perf: Move mmap page data_head offset assertion out of header
perf: Fix mmap_page capabilities and docs
perf diff: Fix to work with new hists design
perf tools: Fix modifier to be applied on correct events
perf tools: Fix various casting issues for 32 bits
perf tools: Simplify event_read_id exit path
tracing: Fix ftrace stack trace entries
tracing: Move the tracing_on/off() declarations into CONFIG_TRACING
perf report: Add a simple GTK2-based 'perf report' browser
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Pull PARISC misc updates from James Bottomley:
"This is a couple of minor updates (fixing lws futex locking and
removing some obsolete cpu_*_map calls)."
* tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
[PARISC] remove references to cpu_*_map.
[PARISC] futex: Use same lock set as lws calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Pull SCSI updates from James Bottomley:
"This is primarily another round of driver updates (lpfc, bfa, fcoe,
ipr) plus a new ufshcd driver. There shouldn't be anything
controversial in here (The final deletion of scsi proc_ops which
caused some build breakage has been held over until the next merge
window to give us more time to stabilise it).
I'm afraid, with me moving continents at exactly the wrong time,
anything submitted after the merge window opened has been held over to
the next merge window."
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
[SCSI] ipr: Driver version 2.5.3
[SCSI] ipr: Increase alignment boundary of command blocks
[SCSI] ipr: Increase max concurrent oustanding commands
[SCSI] ipr: Remove unnecessary memory barriers
[SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
[SCSI] ipr: Fix target id allocation re-use problem
[SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
[SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
[SCSI] bfa: Update the driver version to 3.0.23.0
[SCSI] bfa: BSG and User interface fixes.
[SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
[SCSI] bfa: Move service parameter programming logic into firmware.
[SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
[SCSI] bfa: Flash controller IOC pll init fixes.
[SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
[SCSI] bfa: Modify ISR to process pending completions
[SCSI] bfa: Add fc host issue lip support
[SCSI] mpt2sas: remove extraneous sas_log_info messages
[SCSI] libfc: fcoe_transport_create fails in single-CPU environment
[SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
...
|
|
64252c75a2196a0cf1e0d3777143ecfe0e3ae650 "vfs: remove dget() from
dentry_unhash()" changed the implementation but not the comment.
Cc: Sage Weil <sage@newdream.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Split __lookup_hash into two component functions:
lookup_dcache - tries cached lookup, returns whether real lookup is needed
lookup_real - calls i_op->lookup
This eliminates code duplication between d_alloc_and_lookup() and
d_inode_lookup().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
now we have __lookup_hash() open-coded if !dentry case;
just call the damn thing instead...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reorder if-else cases for starters...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Everything arriving into if (!dentry) will have need_reval = 1.
Indeed, the only way to get there with need_reval reset to 0 would
be via
if (unlikely(d_need_lookup(dentry)))
goto unlazy;
if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE)) {
status = d_revalidate(dentry, nd);
if (unlikely(status <= 0)) {
if (status != -ECHILD)
need_reval = 0;
goto unlazy;
...
unlazy:
/* no assignments to dentry */
if (dentry && unlikely(d_need_lookup(dentry))) {
dput(dentry);
dentry = NULL;
}
and if d_need_lookup() had already been false the first time around, it
will remain false on the second call as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
d_lookup() *will* fail after successful d_invalidate(), if we are
holding i_mutex all along. IOW, we don't need to jump back to
l: - we know what path will be taken there and can do that (i.e.
d_alloc_and_lookup()) directly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
keep holding ->i_mutex over revalidation parts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Duplicate the revalidation-related parts into if (!dentry) branch.
Next step will be to pull them under i_mutex.
This and the next 8 commits are more or less a splitup of patch
by Miklos; folks, when you are working with something that convoluted,
carve your patches up into easily reviewed steps, especially when
a lot of codepaths involved are rarely hit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only caller of __lookup_hash() that needs the exec permission check on
parent is lookup_one_len().
All lookup_hash() callers already checked permission in LOOKUP_PARENT walk.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__lookup_hash() calls ->lookup() if the dentry needs lookup and on success
revalidates the dentry (all under dir->i_mutex).
While this is harmless it doesn't make a lot of sense.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Doing revalidate on a dentry which has not yet been looked up makes no sense.
Move the d_need_lookup() check before d_revalidate().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... implemented that way since the next commit will leave it
almost alone in ext2_fs.h - most of the file (including
struct ext2_super_block) is going to move to fs/ext2/ext2.h.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Since the on-disk format has been stable for quite some time, users
should either use the headers provided by libext2fs or keep a private
copy of this header. For the full discussion, see this thread:
https://lkml.org/lkml/2012/3/21/516
While at it, this commit removes all __KERNEL__ guards, which are now
unnecessary.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Andreas Dilger <aedilger@gmail.com>
Cc: linux-ext4@vger.kernel.org
|
|
... and mtdchar_notifier along with it; just have ->drop_inode() that
will unconditionally get evict them instead of dances on mtd device
removal and use simple_pin_fs() instead of kern_mount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
move mode-dependent parts to callers, kill unused arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON.
Some other systems using the pata_jmicron driver fail to boot because no
disks are detected. Passing pcie_aspm=force on the kernel command line
works around it.
The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when
ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to
always return 0 if aspm is disabled, in order to avoid cases where we
changed ASPM state on pre-PCIe 1.1 devices.
This skipped the secondary function of pcie_aspm_sanity_check which was
to avoid us enabling ASPM on devices that had non-PCIe children, causing
trouble later on. Move the aspm_disabled check so we continue to honour
that scenario.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and
http://bugs.debian.org/665420
Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic
Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520
Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363
[jn: with more symptoms in log message]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that all the slow-path code is gone from these functions, we can
inline them into the main caller - avc_has_perm_flags().
Now the compiler can see that 'avc' is allocated on the stack for this
case, which helps register pressure a bit. It also actually shrinks the
total stack frame, because the stack frame that avc_has_perm_flags()
always needed (for that 'avc' allocation) is now sufficient for the
inlined functions too.
Inlining isn't bad - but mindless inlining of cold code (see the
previous commit) is.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The selinux AVC paths remain some of the hottest (and deepest) codepaths
at filename lookup time, and we make it worse by having the slow path
cases take up I$ and stack space even when they don't trigger. Gcc
tends to always want to inline functions that are just called once -
never mind that this might make for slower and worse code in the caller.
So this tries to improve on it a bit by making the slow-path cases
explicitly separate functions that are marked noinline, causing gcc to
at least no longer allocate stack space for them unless they are
actually called. It also seems to help register allocation a tiny bit,
since gcc now doesn't take the slow case code into account.
Uninlining the slow path may also allow us to inline the remaining hot
path into the one caller that actually matters: avc_has_perm_flags().
I'll have to look at that separately, but both avc_audit() and
avc_has_perm_noaudit() are now small and lean enough that inlining them
may make sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The function for_each_cpu_mask() expects a *pointer* to struct
cpumask as its second argument, whereas select_fallback_rq()
passes the value itself.
And moreover, for_each_cpu_mask() has been marked as obselete
in include/linux/cpumask.h. So move to the more appropriate
for_each_cpu() variant.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Dave Jones <davej@redhat.com>
Cc: Liu Chuansheng <chuansheng.liu@intel.com>
Cc: vapier@gentoo.org
Cc: rusty@rustcorp.com.au
Link: http://lkml.kernel.org/r/4F75BED4.9050005@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
|
|
Use the SET_SYSTEM_SLEEP_PM_OPS macro to initialise the suspend/resume
functions in the new PM API.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
There's no difference in supporting S3 and S4 for virtio devices: the
vqs have to be re-created as the device has to be assumed to be reset at
restore-time. Since S4 already handles this situation, we can directly
use the same code and callbacks for S3 support.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
restore_common() was shared between restore and thaw callbacks. With
thaw gone, we don't need restore_common() anymore.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
The thaw operation was used by the balloon driver, but after the last
commit there's no reason to have separate thaw and restore callbacks.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
There's no reason stats update after restore can't work. If a host
requested for stats, and before servicing the request, the guest entered
S4, upon restore, the stats request can still be processed and sent off
to the host.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Pull Sam Ravnborg's sparc32 build fixes from David Miller.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc32: fix fallout from system.h removal
|
|
Build failures for the typical configs I use
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
