summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-10-05ALSA: hda - Fix invalid initializations for ALC861 auto modeTakashi Iwai
The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ALSA: hda - Fix / improve ALC66x parserTakashi Iwai
The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: hda - Fix digita/analog mic auto-switching with IDT codecsTakashi Iwai
When the auto-mic switching between an analog and a digital mic is needed with IDT codecs, the current driver doesn't reset the connection of the digital mux. This patch fixes the behavior by checking both mux connections properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: hda - Added quirk to enable sound on Toshiba NB200Manoj Iyer
Patch was tested on Toshiba NB200 and is found to enable sound. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30ALSA: hda - Resurrect input-source mixer of ALC268 model=acerTakashi Iwai
In the commit fdbc66266c21976027938642f60e0f047149a61a, I mistakenly replaced the capture mixer array for ALC268_ACER to nosrc version although this should be kept to alt_mixer. Now fixed back. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-29ALSA: hda - Analog Devices AD1984A add HP Touchsmart modelMiguel de Barros
Reference: ALSA bug #0004614 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614 port-A (0x11) - front hp-out port-D (0x12) - rear line out port-E (0x1c) - front mic-in port-F (0x16) - Internal speakers digital-mic (0x17) - Internal mic init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware Signed-off-by: Miguel de Barros <miguel.de.barros@bluewin.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-24ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelistDaniel T Chen
BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=547994 Enable MSI by default for this Pavilion model. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-24ALSA: hda - CD-audio sound for hda-intel conexant benq laptopLukasz Marcinowski
After puting a cd-audio inside my laptop there was no sound out here, so I decided to install alsa-driver with debug level and setup a model=test, it didn't help, but then I look at source code and added this few lines, now cd-audio is working both when playback/recording. [Additional minor fixes of mixer element/item names by tiwai] Signed-off-by: Lukasz Marcinowski <nowymarluk@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-17ALSA: hda - Fix MSI GX620 mixerTakashi Iwai
The headphone and speaker mixer elements aren't properly set for MSI GX620 with targa-8ch-dig quirk. Also fixed the speaker volume control for other ALC883-targa quirks, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-15ALSA: hda - Fix Dell S14 pin setupTakashi Iwai
The pin setup for Dell S14 quirk is rather wrong for the latest driver. Fixed pin 0x0a, 0x0b, 0x0d and 0x0f. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-15ALSA: hda - Fix IDT92HD83* codec setupTakashi Iwai
Remove unnecessary (and buggy) init sequences left for IDT92HD83* codecs in the previous fixes. The DACs are now dynamically connected, thus shouldn't be set statically in init verbs. Also, the mono_nid is detected dynamically, thus shouldn't be set staticaly, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-14ALSA: hda - Add support for HP dv6Takashi Iwai
Add the quirk entry for HP dv6. Also add a workaround for the headphone detection by setting hp_detect=1 beforehand. Without this, the driver won't do auto-muting because BIOS doesn't give any HP pin but only a line-out pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-14ALSA: hda - Fix HP/line-out initialization with IDT/STAC codecsTakashi Iwai
It's possible that hp_detect is set even though no headphone pin is detected. The driver issues, however, an unsol event only to hp_pins[0], which can be invalid. This patch adds the check of the valid pin to send an unsol event at initialization and resume callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-14ALSA: hda - Set default GPIO for IDT92HD71bxxTakashi Iwai
A smiliar fix for IDT 92HD71Bxx codecs like the previous commit for other IDT/STAC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-14ALSA: hda - Set default GPIO for STAC/IDT codecsTakashi Iwai
IDT92HD73xx and STAC927x codecs use GPIO0 bit as EAPD on many machines. However, currently we don't set it unless the model is specified just for safety reason. But, most machines do need this bit, so this safety handling is rather annoying. This patch enables GPIO0 setup as default for them. Many HP / Dell laptops should work even without model override with this change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-11ALSA: hda - Add missing model=auto entry for ALC269Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-08ALSA: hda - Use auto model for HP laptops with ALC268 codecTakashi Iwai
The HP laptops with ALC268 codec seem working better with model=auto than model=toshiba; e.g. the auto model fixes missing digital outputs. Let's fix quirk entry to choose auto model explicitly. Tested-by: Jens Jorgensen <jbj1@ultraemail.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digitalddiaz@cenditel.gob.ve
The model clevo-m540r was created with 6-channel and digital support. All functions verified except spdif. Tested with a VIT D2000 laptop which has: [lspci extract] Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: CLEVO/KAPOK Computer Device [1558:5409] [/proc/asound/card0/codec\#0 header] Codec: Realtek ALC883 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0883 Subsystem Id: 0x15585409 Revision Id: 0x100002 [Added a comment about HP mute and the model description by tiwai] Signed-off-by: Dhionel Diaz <ddiaz@cenditel.gob.ve> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-02ALSA: hda - Add support of Alienware M17x laptopTakashi Iwai
Added the quirk for Alienware M17x with IDT 92HD73* codec chip. It has two HP and one line-out jack, one mic jack, a built-in speaker and a built-in mic. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-02ALSA: hda - Remove dead codes from patch_sigmatel.cTakashi Iwai
Due to the previous fix of input source for IDT92HD73xx, the amp mux and amp vol stuff became unused. Let's rip off dead codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-02ALSA: hda - Fix input source selection of IDT92HD73xxTakashi Iwai
Fix the mux_nids to select directly the input source instead of mux mixers so that it works with the current mux enum handler for IDT 92HD73xx codecs. Also, clean up useless / unnecessary mixer controls and init verbs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-02ALSA: hda - Fix obsolete CONFIG_SND_DEBUG_DETECTTakashi Iwai
Fix the old dead CONFIG_SND_DEBUG_DETECT to CONFIG_SND_DEBUG_VERBOSE. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-01ALSA: hda - Unmute docking line-out as default with AD1984A codecTakashi Iwai
Unmute the docking-station line-out as default on machines with AD1984A codec chip. It can be still muted via "Dock" mixer switch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-01ALSA: hda - Add another entry for Nvidia HDMI deviceTakashi Iwai
Added another entry for Nvidia HDMI device (10de:0003). Reference: kernel bug#14097 http://bugzilla.kernel.org/show_bug.cgi?id=14097 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31ALSA: hda - Add missing GPIO initialization for AD1984A laptop modelTakashi Iwai
A similar initialization of GPIO1 pin like mobile model is needed for laptop model, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31ALSA: hda - Add support of docking auto-mute/mic for AD1984A laptop modelTakashi Iwai
Add the support of automatic mute and mic-switching of the docking station HP and mic plugs for AD1984A laptop model for some HP machines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31Merge branch 'fix/hda' into topic/hdaTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c
2009-08-31ALSA: hda - Fix ALC268/ALC269 headphone pin routingTakashi Iwai
Fix the headphone pin routing of ALC268/ALC269 codecs. Using alc882 routine doesn't work because alc268/alc269 parser assumes the independent DACs for both HP and speaker outputs. Need to assign the DAC depending on the pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889ATakashi Iwai
This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1 quirk with ALC889A codec, which caused the silent headphone output. Also, this gives the individual Headphone and Speaker volume controls. Reference: kernel bug#14078 http://bugzilla.kernel.org/show_bug.cgi?id=14078 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-31ALSA: hda - Add missing mux check for VT1708Takashi Iwai
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-29ALSA: hda - Create "Digital Mic Capture Volume" correctly for IDT codecsTakashi Iwai
So far, the digital mic capture volume wasn't created. This is because IDT codecs have output amps for digital mics, not input amps, while input amps should be used for other analog pins. Thus the automatic capture volume creation should check both directions for digital mics. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27ALSA: hda - Add more quirk for HP laptops with AD1984ATakashi Iwai
More entries for HP laptops to get them working properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Add / fix model entries for HD-audio driverTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Add full audio support on Acer Aspire 7730G notebookDenis Kuplyakov
1) Added support of internal subwoofer (it sounds!!!) 2) Auto muting front speakers and internal subwoofer on headphones plug. 3) Internal mic works. 4) 3 channel mods (jack maps): black pink blue 2ch: front ext mic line in 4ch: front ext mic surround 6ch: front CLFE surround Can be changed in mixer. 5) Sound can be recorded from: Internal mic Ext mic Cd Line in 6) 2 separate capture channels. Signed-off-by: Denis Kuplyakov <dener.kup@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC662Takashi Iwai
The last patch in this series is for ALC662; pretty similar as the previous patch for ALC861-VD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC861-VDTakashi Iwai
One more patch to give a better name for the primary output controls, this time for ALC861-VD codec. The change is simple, just checking the pin connection whether it's a speaker-out. When both speaker and HP are assigned, we name the volume as "PCM" as this influences on both outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC262Takashi Iwai
Similar improvements for ALC262 codec like previous two commits: assign a better name, either Master or Speaker, for the primary output controls. However, in the case of ALC262 codec, the necessary changes are larger than others because we need to check the possibility of different mixer amps depending on the pins. The pin 0x16 is mono, and bound with the dedicated mixer 0x0e while other pins are bound with 0x0c. Thus, there are two possible volumes. When only one of them is used, we can name it as "Master". OTOH, when both are used at the same time, they have to be named uniquely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC260Takashi Iwai
Instead of fixed "Front" mixer name, try to assign a better name, e.g. "Master" or "Speaker" fot the primary output volume controls of ALC260 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Improve auto-cfg mixer name for ALC880Takashi Iwai
When there is only one DAC is used for ALC880, try to assign a better name, either Speaker or Front, depending on the output pin type. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-25ALSA: hda - Generalize input pin parsing in patch_realtek.cTakashi Iwai
Provide a standard parser for input pins to create the input mixer and input source controls instead of having a difference one for each Realtek codec. The new helper parses the codec connections dynamically isntead of fixed indicies. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ALSA: hda - Reuse ALC268 parser for ALC269Takashi Iwai
Reuse a part of the code of ALC268 parser for ALC269. This will change the default output volume either to Front or Speaker depending on the pin configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ALSA: hda: move open coded tricks into get_wcaps_channels()Wu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-19ALSA: hda - Fix probe of Toshiba laptops with ALC268 codecTakashi Iwai
There are many variants of Toshiba laptops with ALC268 codec, and it seems that a few of them don't work with model=toshiba preset since they have the secondary ALC268 codec just for HDMI output. This is a regression due to the previous clean-up work to merge all Toshiba quirk entries into a single check. This patch adds the identification of such laptops to apply the standard BIOS-probing method. Unfortunately, Toshiba laptops have all the same PCI SSID, so we need to check the codec SSID to identify each device. Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-19ALSA: hda: add model for Intel DG45ID/DG45FC boardsWu Fengguang
The BIOS pin configs are in fact correct and shall not be overwritten. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19ALSA: hda: enable speaker output for Compaq 6530s/6531sWu Fengguang
HP Compaq 6530s and 6531s internal speaker is silence or becomes silence within 1 minute after fresh boot. It is found that pin 0x1c must be set to PIN_OUT mode to make the speaker work. This is weird - line-in pin 0x1c and speaker pin 0x16 seem to be unrelated. The codec differences before/after patch are: @@ Node 0x17 [Pin Complex] wcaps 0x40020b: Pin Default 0x41a6e130: [N/A] Mic at Ext Rear Conn = Digital, Color = White DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x24: IN + Pin-ctls: 0x40: OUT @@ Node 0x1c [Pin Complex] wcaps 0x40018d: Pin Default 0x41813021: [N/A] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x1 - Pin-ctls: 0x24: IN VREF_80 + Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x24 Tests show that it won't impact (external) Mic recording. Reported-by: "Lin, Ming M" <ming.m.lin@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19ALSA: hda - Fix invalid capture mixers with some ALC268 modelsTakashi Iwai
The auto-mic clean-up patches caused regressions on some ALC268 models that have no proper input_mux but with "Input Source" mixer elements. Such a combination results in Oops when accessed. [A reason why set_capture_mixer() isn't used in patch_alc268() is that ALC268 codec have HDA_OUTPUT direction for capture volumes unlike other codecs. Thus it needs own definitions of capture elements.] This patch fixes the issues: - Add a capture mixer definition without input-source - Use the new capture mixer appropriately Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-15ALSA: hda - Add missing num_adc_nids definition for IDT92HD8xxxTakashi Iwai
The previous fix removed the definition of num_adc_nids wrongly, and this resulted in the missing input-source control. Now readded again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-13ALSA: hda - Fix / clean up IDT92HD83xxx codec parserTakashi Iwai
A few improvements for IDT 92HD83xxx codec pareser: - Remove unused / deprecated mixer-amp controls - Handle d-mics as normal inputs since this codec has no separate MUXes for analog and digital - Don't create duplicated controls for capture volumes with Mux capture volumes Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 11:44:36 +0000