| Age | Commit message (Collapse) | Author |
|---|
|
Rename Kprobes-based event tracer to kprobes-based tracing event
(kprobe-event), since it is not a tracer but an extensible
tracing event interface.
This also changes CONFIG_KPROBE_TRACER to CONFIG_KPROBE_EVENT
and sets it y by default.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001247.3454.14131.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Rename the group name of perf probe events to 'probe'.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001238.3454.70508.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fall back to non-dwarf probe point if the probe definition may
not need dwarf analysis, when perf can't find vmlinux/debuginfo.
This might skip some inlined code of target function.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001229.3454.63987.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Improve error messages in perf-probe so that users can figure
out problems easily.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001221.3454.52030.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Update Documentation/perf-probe.txt accoding to recent
syntax changes.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001212.3454.19415.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Annotate away this false positive warning on older GCCs:
cc1: warnings being treated as errors
builtin-probe.c: In function ‘parse_probe_event’:
builtin-probe.c:72: warning: ‘nc’ is used uninitialized in this function
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1257254947-16789-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add function-entry relative line number specifying support to
perf-probe. This allows users to define probes by line number
from entry of the function.
e.g.
perf probe schedule:16
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204319.30545.30678.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This changes probe point syntax of perf-probe as below
<SRC>[:ABS_LN] [ARGS]
or
<FUNC>[+OFFS|%return][@SRC] [ARGS]
And event name and event group name are automatically
generated based on probe-symbol and offset as below.
perfprobes/SYMBOL_OFFSET[_NUM]
Where SYMBOL is the probing symbol and OFFSET is
the byte offset from the symbol.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204310.30545.84984.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Change command-line option from -P to --add, and accepting
probes without --add too.
perf probe --add "probe-define"
or, just:
perf probe "probe-define"
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204301.30545.48600.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Exit searching after finding real (not-inlined) function,
because there should be no same symbol in that CU.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204252.30545.19251.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix find_probe_event() to compare both of event-name and
event-group. Without this fix, kprobe-tracer overwrites existing
same event-name probe even if its group-name is different.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204244.30545.27516.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add Intel FMA(FUSED-MULTIPLY-ADD) instructions to x86 opcode map
for x86 instruction decoder.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204235.30545.33997.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add Intel AVX(Advanced Vector Extensions) instruction set
support to x86 instruction decoder. This adds insn.vex_prefix
field for storing VEX prefixes, and introduces some original
tags for expressing opcodes attributes.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204226.30545.23451.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add pclmulq opcode to x86 opcode map.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204219.30545.82039.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Merge INAT_REXPFX into INAT_PFX_* macro and rename it to
INAT_PFX_REX.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204211.30545.58090.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix superscripts position because some superscripts of SSE
opcode are not put in correct position.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204204.30545.97296.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Use the new pr_{err,warning,debug,etc} printout methods, just
like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
[ Split this patch out, to keep perf/probes separate. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
tools/perf/Makefile
Merge reason:
- fix the conflict
- pick up the pr_*() infrastructure to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.
This results in build errors on some machines.
Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).
Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.
This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
After:
0.80% perf [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
| | __fsnotify_parent
Also, for clarity, we don't put anymore the callchain as is but:
- If we have a top level ancestor in the callchain, start it
with a first ascii hook.
Before:
0.80% perf [kernel] [k] __lock_acquire
__lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
After:
0.80% perf [kernel] [k] __lock_acquire
|
--- __lock_acquire
lock_acquire
|
|--58.33%-- _spin_lock
| |
| |--28.57%-- inotify_should_send_event
| | fsnotify
[..] [..]
- Otherwise, if we have several top level ancestors, then
display these like we did before:
1.69% Xorg
|
|--21.21%-- vread_hpet
| 0x7fffd85b46fc
| 0x7fffd85b494d
| 0x7f4fafb4e54d
|
|--15.15%-- exaOffscreenAlloc
|
|--9.09%-- I830WaitLpRing
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While recursively printing the branches of each callchains, we
forget to display the root. It is never printed.
Say we have:
symbol
f1
f2
|
-------- f3
| f4
|
---------f5
f6
Actually we never see that, instead it displays:
symbol
|
--------- f3
| f4
|
--------- f5
f6
However f1 is always the same than "symbol" and if we are
sorting by symbols first then "symbol", f1 and f2 will be well
aligned like in the above example, so displaying f1 looks
redundant here.
But if we are sorting by something else first (dso, comm,
etc...), displaying f1 doesn't look redundant but rather
necessary because the symbol is not well aligned anymore with
its callchain:
comm dso symbol
f1
f2
|
--------- [...]
And we want the callchain to be obvious.
So we fix the bug by printing the root branch, but we also
filter its first entry if we are sorting by symbols first.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256246604-17156-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add the kernel source include file as well to the include files
search path, to fix this build bug:
In file included from arch/x86/tools/test_get_len.c:28:
arch/x86/lib/insn.c:21:26: error: linux/string.h: No such file or directory
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165531.4145.21872.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The second argument in the strtok_r() function is not to be used
generically and can have different implementations. Currently
the function parsing of the perf trace code uses the second
argument to copy data from. This can crash the tool or just have
unpredictable results.
The correct solution is to use strsep() which has a defined
result.
I also added a check to see if the result was correct, and will
break out of the loop in case it fails to parse as expected.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020232034.237814877@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When using gdb to debug perf, it is practically impossible to
use when perf is compiled with -O6. For developers, this patch
adds the DEBUG feature to the make command line so that a
developer can easily remove the optimization flag.
LKML-Reference: <1255590330.8392.446.camel@twins>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091020232033.984323261@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add Intel AES opcodes to x86 opcode map. These opcodes are
used in arch/x86/crypt/aesni-intel_asm.S.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165531.4145.21872.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix a typo in inat_get_group_attribute() which should refer
inat_group_tables, not inat_escape_tables.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap<systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020165524.4145.97333.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We need to use map->unmap_ip() here too to match section
relative symbol address to the absolute address needed to match
objdump -dS addresses.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256061295-19835-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If the user doesn't pass a symbol name to annotate, it will
annotate all the symbols that have hits, in order, just like
'perf report -s comm,dso,symbol'.
This is a natural followup patch to the one that uses
output_hists to find the symbols with hits.
The common case is to annotate the first few entries at the top
of a perf report, so lets type less characters.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256058509-19678-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We have this sym_priv_size mechanism for attaching private areas
to struct symbol entries but annotate wasn't using it, adding
private areas to struct symbol in addition to a ->priv pointer.
Scrap all that and use the sym_priv_size mechanism.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We need this because we get section relative addresses when
reading the symtabs, but when a tool like 'perf annotate' needs
to match these address to what 'objdump -dS' produces we need
the address + section back again.
So in annotate now we look at the 'struct hist_entry' instances
(that weren't really being used) so that we iterate only over
the symbols that had some hit and get the map where that
particular hit happened so that we can get the right address to
match with annotate.
Verified that at least:
perf annotate mmap_read_counter # Uses the ~/bin/perf binary
perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all
on a 'perf record perf top' session seems to work.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255979877-12533-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
During the Kernel Summit demo of perf/ftrace/timechart, there
was a feature request to have a process filter for timechart so
that you can zoom into one or a few processes that you are
really interested in.
This patch adds basic support for this feature, the -p
(--process) option now can select a PID or a process name to be
shown. Multiple -p options are allowed, and the combined set
will be included in the output.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020070939.7d0fb8a7@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Merge reason: Queue up dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
[from KS feedback]
Currently, scheduler delays are shown in a mostly transparent,
light yellow color. This color is rather hard to see on several
screens, especially projectors.
This patch changes the color of the scheduler delays to be a
much more "hard" yellow that survived the kernel summit
projector.
Reported-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064731.20ae126a@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The timechart wakeup arrows currently show no process
information when the waker/wakee are processes that are not
actually chosen to be shown on the timechart.
This patch fixes this oversight, by looking through all
processes (after giving preference to visible processes) as well
as falling back to just showing the PID if no name for the
process can be resolved.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064649.0e4959b2@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Build dependencies were not properly mapped out.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1255973491-11626-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
To cure a bunch of:
In file included from util/include/linux/bitmap.h:1,
from util/header.h:8,
from builtin-trace.c:7:
util/include/../../../../include/linux/bitmap.h:8:26: error:
linux/string.h: No such file or directory make: ***
[builtin-trace.o] Error 1 make: *** Waiting for unfinished
jobs....
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1255972296-11500-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Count branches first, cache-misses second. The reason is that
on x86 branches are not counted by all counters on all CPUs.
Before:
Performance counter stats for 'ls':
0.756653 task-clock-msecs # 0.802 CPUs
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
250 page-faults # 0.330 M/sec
2375725 cycles # 3139.781 M/sec
1628129 instructions # 0.685 IPC
19643 cache-references # 25.960 M/sec
4608 cache-misses # 6.090 M/sec
342532 branches # 452.694 M/sec
<not counted> branch-misses
0.000943356 seconds time elapsed
After:
Performance counter stats for 'ls':
1.056734 task-clock-msecs # 0.859 CPUs
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
259 page-faults # 0.245 M/sec
3345932 cycles # 3166.295 M/sec
3074090 instructions # 0.919 IPC
616928 branches # 583.806 M/sec
39279 branch-misses # 6.367 %
21312 cache-references # 20.168 M/sec
3661 cache-misses # 3.464 M/sec
0.001230551 seconds time elapsed
(also prettify the printout of branch misses, in case it's
getting scaled.)
Cc: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
tools/perf/builtin-stat.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c373683..95a55ea 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = {
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
};
---
tools/perf/builtin-stat.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 95a55ea..90e0a26 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -50,17 +50,17 @@
static struct perf_event_attr default_attrs[] = {
- { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
- { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
- { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS },
- { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
-
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
- { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
+ { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
+ { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES },
+ { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS },
+ { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
+
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
};
|
|
Clean up the array definition to be vertically aligned.
No functional effects.
Cc: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
tools/perf/builtin-stat.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c373683..95a55ea 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = {
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
+ { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES },
};
|
|
Adds performance event information about branches
and branch misses to the default output of perf stat.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Check for libelf headers and glibc headers separately so that
the error message correctly identifies which package
installation is missing/needed.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <4ADBCCE8.3060300@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add delay_secs sanity check to handle_keypress,
this fixes a division by zero crash.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4AD9EBFD.106@klingt.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Use DECLARE_BITMAP instead of an open coded array for our bitmap
of featured sections.
This makes the array an unsigned long instead of a u64 but since
we use a 256 bits bitmap, the array size shouldn't vary between
different boxes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255795038-13751-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This provides a new set of bitmasked headers. A new field is
added in the perf headers that implements a bitmap storing
optional features present in the perf.data file.
The layout can be pictured like this:
(Usual perf headers)(Features bitmap)[Feature 0][Feature
n][Feature 255]
If the bit n is set, then the feature n is used in this file.
They are all set in order. This brings a backward and forward
compatibility.
The trace_info section has moved into such optional features,
this is the first and only one for now.
This is backward compatible with the .32 file version although
it doesn't support the previous separate trace.info file.
And finally it doesn't support the current interim development
version.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Use the kernel bitmap library for internal perf tools uses.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When we count both branches and branch-misses it is useful to
print out the percentage of branch-misses:
# perf stat -e branches -e branch-misses /bin/true
Performance counter stats for '/bin/true':
401684 branches # 0.000 M/sec
23301 branch-misses # 5.801 %
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20091018112923.GQ4808@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
kernel/trace/trace_event_profile.c
Merge reason: update to -rc5 and resolve conflict.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add perf-probe subcommand document and add it to command-list.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000827.16556.73539.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add DIE_IF() macro and replace ERR_IF() with it, and use
linux/stringify.h.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000818.16556.82452.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Replace debug() macro with eprintf() and add -v option for
showing those messages in perf-probe.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20091017000810.16556.38013.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
