summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-11-29atm: br2684: Make headroom and hard_header_len depend on the payload typePascal Hambourg
Routed payload requires less headroom than bridged payload. So do not reallocate headroom if not needed. Also, add worst case AAL5 overhead to netdev->hard_header_len. Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: optimize socket timestampingEric Dumazet
We can test/set multiple bits from sk_flags at once, to shorten a bit socket setup/dismantle phase. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: dont call jump_label_dec from irq contextEric Dumazet
Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/ethernet: convert drivers/net/ethernet/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/net/ethernet/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jonas Bonn <jonas@southpole.se> Cc: Sebastian Poehn <sebastian.poehn@belden.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/can: convert drivers/net/can/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/net/can/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Kurt Van Dijck <kurt.van.dijck@eia.be> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: NETROM: Fix formatting.Ralf Baechle
The Linux coding style wants the return statement on its own line. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: NETROM: Cleanup argument SIOCADDRT ioctl argument checking.Ralf Baechle
nr_route.ndigis is unsigned int so the nr_route.ndigis < 0 expression is never true and can be dropped. Doing the nr_ax25_dev_get call later allows the nr_route.ndigis test to bail out without having to dev_put. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: NETROM: When adding a route verify length of mnemonic string.Ralf Baechle
struct nr_route_struct's mnemonic permits a string of up to 7 bytes to be used. If userland passes a not zero terminated string to the kernel adding a node to the routing table might result in the kernel attempting to read copy a too long string. Mnemonic is part of the NET/ROM routing protocol; NET/ROM routing table updates only broadcast 6 bytes. The 7th byte in the mnemonic array exists only as a \0 termination character for the kernel code's convenience. Fixed by rejecting mnemonic strings that have no terminating \0 in the first 7 characters. Do this test only NETROM_NODE to avoid breaking NETROM_NEIGH where userland might passing an uninitialized mnemonic field. Initial patch by Dan Carpenter <dan.carpenter@oracle.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Walter Harms <wharms@bfs.de> Cc: Thomas Osterried <thomas@osterried.de> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29NET: AX.25: Check ioctl arguments to avoid overflows further down the road.Ralf Baechle
Very large, nonsenical arguments or use in very extreme conditions could result in integer overflows. Check ioctls arguments to avoid such overflows and return -EINVAL for too large arguments. To allow the use of AX.25 for even the most extreme setup (think packet radio to the Phase 5E mars probe) we make no further attempt to clamp the argument range. Originally reported by Fan Long <longfancn@gmail.com> and a first patch was sent by Xi Wang <xi.wang@gmail.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Xi Wang <xi.wang@gmail.com> Cc: Joerg Reuter <jreuter@yaina.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Thomas Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move switch drivers to new directory drivers/net/dsaBen Hutchings
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move all definitions needed by drivers into <net/dsa.h>Ben Hutchings
Any headers included by drivers should be under include/, and any definitions they use are not really private to the core as the name "dsa_priv.h" suggests. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Remove unnecessary exportsBen Hutchings
I mistakenly exported functions from slave.c that are only called from dsa.c, part of the same module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2011-11-28tg3: Scale back code that modifies MRRSMatt Carlson
Tg3 normally gets a performance boost by increasing the PCI Maximum Read Request Size (MRRS) to 4k. Unfortunately, this is causing some problems on particular hardware platforms. This patch removes all code that modifies the MRRS except for one case. As part of a solution to fix an internal FIFO problem on the 5719, the driver artificially capped the MRRS to 2k for the entire 5719, and later 5720, ASIC revs. This was overly aggressive and only really needed to be done for the 5719 A0. In the spirit of the rest of this patch, the driver will only reprogram the MRRS for this device if the value exceeds the 2k cap. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28tg3: Fix TSO CAP for 5704 devs w / ASF enabledMatt Carlson
On the earliest TSO capable devices, TSO was accomplished through firmware. The TSO cannot coexist with ASF management firmware though. The tg3 driver determines whether or not ASF is enabled by calling tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory. Commit dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move TSO_CAPABLE assignment", accidentally moved the code that determines TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a consequence, the driver was attempting to determine TSO capabilities before it had all the data it needed to make the decision. This patch fixes the problem by revisiting and reevaluating the decision after tg3_get_eeprom_hw_cfg() is called. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28sch_sfb: use skb_flow_dissect()Eric Dumazet
Current SFB double hashing is not fulfilling SFB theory, if two flows share same rxhash value. Using skb_flow_dissect() permits to really have better hash dispersion, and get tunnelling support as well. Double hashing point was mentioned by Florian Westphal Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28cls_flow: use skb_flow_dissect()Eric Dumazet
Instead of using a custom flow dissector, use skb_flow_dissect() and benefit from tunnelling support. This lack of tunnelling support was mentioned by Dan Siemon. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28net: use skb_flow_dissect() in __skb_get_rxhash()Eric Dumazet
No functional changes. This uses the code we factorized in skb_flow_dissect() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28net: introduce skb_flow_dissect()Eric Dumazet
We use at least two flow dissectors in network stack, with known limitations and code duplication. Introduce skb_flow_dissect() to factorize this, highly inspired from existing dissector from __skb_get_rxhash() Note : We extensively use skb_header_pointer(), this permits us to not touch skb at all. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Change value comparison orderYaniv Rosner
Change comparison order such that the variable will come before the compared value. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Cosmetic changesYaniv Rosner
Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Fix self test of BCM57800Yaniv Rosner
Fix the MAC test of the 1G port of the BCM57800 to use the UMAC instead of the XMAC. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Add known PHY type checkYaniv Rosner
The populate function will fail in case an unknown external PHY is detected. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Change Warpcore MDIO work around modeYaniv Rosner
This patch enables the usage of simpler MDC/MDIO work-around when accessing Warpcore registers. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Fix BCM84833 link and LED behaviorYaniv Rosner
This patch contain several fixes for the BCM84833. This PHY is still not in bnx2x production, hence this patch can be considered as enhancement. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: Warpcore HW reset following fan failureYaniv Rosner
Put Warpcore in low power mode in case of fan failure to reduce heat. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: ETS changesYaniv Rosner
Fix a problem when new traffic class is created with 0% BW, the ETS is not conforming. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28bnx2x: PFC changesYaniv Rosner
Change BRB to work in per class guaranteed mode and handle cases for BW 0%. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28tcp: tcp_sendmsg() wrong access to sk_route_capsEric Dumazet
Now sk_route_caps is u64, its dangerous to use an integer to store result of an AND operator. It wont work if NETIF_F_SG is moved on the upper part of u64. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-11-27net/irda: convert drivers/net/irda/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/net/irda/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27tcp: skip cwnd moderation in TCP_CA_Open in tcp_try_to_openNeal Cardwell
The problem: Senders were overriding cwnd values picked during an undo by calling tcp_moderate_cwnd() in tcp_try_to_open(). The fix: Don't moderate cwnd in tcp_try_to_open() if we're in TCP_CA_Open, since doing so is generally unnecessary and specifically would override a DSACK-based undo of a cwnd reduction made in fast recovery. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27tcp: allow undo from reordered DSACKsNeal Cardwell
Previously, SACK-enabled connections hung around in TCP_CA_Disorder state while snd_una==high_seq, just waiting to accumulate DSACKs and hopefully undo a cwnd reduction. This could and did lead to the following unfortunate scenario: if some incoming ACKs advance snd_una beyond high_seq then we were setting undo_marker to 0 and moving to TCP_CA_Open, so if (due to reordering in the ACK return path) we shortly thereafter received a DSACK then we were no longer able to undo the cwnd reduction. The change: Simplify the congestion avoidance state machine by removing the behavior where SACK-enabled connections hung around in the TCP_CA_Disorder state just waiting for DSACKs. Instead, when snd_una advances to high_seq or beyond we typically move to TCP_CA_Open immediately and allow an undo in either TCP_CA_Open or TCP_CA_Disorder if we later receive enough DSACKs. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27tcp: use SACKs and DSACKs that arrive on ACKs below snd_unaNeal Cardwell
The bug: When the ACK field is below snd_una (which can happen when ACKs are reordered), senders ignored DSACKs (preventing undo) and did not call tcp_fastretrans_alert, so they did not increment prr_delivered to reflect newly-SACKed sequence ranges, and did not call tcp_xmit_retransmit_queue, thus passing up chances to send out more retransmitted and new packets based on any newly-SACKed packets. The change: When the ACK field is below snd_una (the "old_ack" goto label), call tcp_fastretrans_alert to allow undo based on any newly-arrived DSACKs and try to send out more packets based on newly-SACKed packets. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27tcp: use DSACKs that arrive when packets_out is 0Neal Cardwell
The bug: Senders ignored DSACKs after recovery when there were no outstanding packets (a common scenario for HTTP servers). The change: when there are no outstanding packets (the "no_queue" goto label), call tcp_fastretrans_alert() in order to use DSACKs to undo congestion window reductions. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27tcp: make is_dupack a parameter to tcp_fastretrans_alert()Neal Cardwell
Allow callers to decide whether an ACK is a duplicate ACK. This is a prerequisite to allowing fastretrans_alert to be called from new contexts, such as the no_queue and old_ack code paths, from which we have extra info that tells us whether an ACK is a dupack. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4_en: bug fix for the case of vlan id 0 and UP 0Amir Vadai
When using vlan 0 and UP 0, vlan header wasn't placed. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4_en: adding loopback supportAmir Vadai
Device must be in promiscuous mode or DMAC must be same as the host MAC, or else packet will be dropped by the HW rx filtering. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4_en: fix WOL handlers were always looking at port2 capability bitOren Duer
There are 2 capability bits for WOL, one for each port. WOL handlers were looking only on the second bit, regardless of the port. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4_en: using non collapsed CQ on TXYevgeny Petrilin
Moving to regular Completion Queue implementation (not collapsed) Completion for each transmitted packet is written to new entry. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4_en: fix sparse warning on a cast which truncates bits from constant ↵Or Gerlitz
value the MLX4_EN_WOL_DO_MODIFY flag which is defined through enum targets bit 63, this triggers a "cast truncate bits from constant value (8000000000000000 becomes 0)" warning from sparse, fix that by using define instead of enum. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4: fix UDP RSS related settingsOr Gerlitz
Using RSS which takes into account UDP headers is controlled by a module param, fix the setting of the HW RSS context to align with that scheme. So far it was uncoditionally allowing hashing on the UDP headers. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27net/mlx4: move RSS related definitions to be globalOr Gerlitz
Towards adding RSS support for IB drivers/application who use the mlx4 HW, make the RSS related definitions global and change the mlx4_en driver to use them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27isdn/gigaset: report ISDN4Linux interface only onceTilman Schmidt
Move the "ISDN4Linux interface" message from device registration, where it is emitted for each device, to driver registration, where it is emitted only once, for consistency with the CAPI variant. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26ifenslave: Fix unused variable warnings.David S. Miller
Documentation/networking/ifenslave.c: In function ‘if_getconfig’: Documentation/networking/ifenslave.c:508:14: warning: variable ‘mtu’ set but not used [-Wunused-but-set-variable] Documentation/networking/ifenslave.c:508:6: warning: variable ‘metric’ set but not used [-Wunused-but-set-variable] The purpose of this function is to simply print out the values it probes, so... Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26atm: eliminate atm_guess_pdu2truesize()chas williams - CONTRACTOR
Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26virtio_net: return already tracked tx_fifo_errors via virtnet_getstats()Rick Jones
Tx_fifo_errors are tracked in start_xmit_ for virtio_net, but not reported in the tallies returned by virtnet_stats(). Return them as the rx "sub-stats" rx_length_errors and rx_frame_errors are. Signed-off-by: Rick Jones <rick.jones2@hp.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26ray_cs: Fix array bounds warnings.David S. Miller
rx_msg is defined to have a 1 entry array at the end, so gcc warns: drivers/net/wireless/ray_cs.c: In function ‘rx_authenticate’: drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2439:15: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2452:16: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2453:18: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2453:32: warning: array subscript is above array bounds [-Warray-bounds] Use a zero length array and rename to "ray_rx_msg" to make sure we hit all of the necessary cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26airo: Fix array bounds warning when moving packet payload.David S. Miller
drivers/net/wireless/airo.c: In function ‘encapsulate’: drivers/net/wireless/airo.c:1421:15: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/airo.c: In function ‘decapsulate’: drivers/net/wireless/airo.c:1509:16: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26KSZ8851-SNL: Add ethtool support for EEPROM via eeprom_93cx6Ben Dooks
Add ethtool EEPROM read/write support using the eeprom_93cx6 library instead of open-coding the functions. Depends on eeprom_93cx6 driver getting EEPROM write support. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> [sboyd@codeaurora.org: Removed previous eeprom implementation] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-22 10:29:26 +0000