summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-08-06ARM: shmobile: Use default ->init_time() on Bockw DT refMagnus Damm
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: Use default ->init_time() on BockwMagnus Damm
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: Use default ->init_time() on r8a7779Magnus Damm
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: Use default ->init_time() on r8a7778Magnus Damm
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: Use default ->init_time() on r8a7740Magnus Damm
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: Use default ->init_time() on r8a73a4Magnus Damm
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of hspiKuninori Morimoto
sh-hspi driver which doesn't need platform data at the time of registration can be registerd on SoC. And, registering these drivers in the SoC code can avoid unwanted device numbering issue. (ex. the hspi2 device number will be spi.0 if hspi2 only registered) This patch registers it on SoC code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of i2cKuninori Morimoto
i2c-rcar driver which doesn't need platform data at the time of registration can be registerd on SoC. And, registering these drivers in the SoC code can avoid unwanted device numbering issue. (ex. the i2c3 device number will be i2c.0 if i2c3 only registered) This patch registers it on SoC code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of sdhiKuninori Morimoto
sdhi driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of usb phyKuninori Morimoto
usb phy driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: r8a7778: cleanup registration of mmcifKuninori Morimoto
sh_mmcif driver which needs platform data at the time of registration is used from BockW only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06Merge branch 'dt2' into cleanup3-baseSimon Horman
Conflicts: arch/arm/mach-shmobile/Makefile.boot
2013-08-06ARM: shmobile: r8a7740: Add TPU node to the device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: lager: enable nfsroot in DTSSimon Horman
Now that Ether support has been added to the lager board it is possible to use nfsroot. This configuration is in line with that of other shmobile boards. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: marzen: Use DT for GICKuninori Morimoto
Current Marzen is using DT booting, and r8a7779.dtsi already has GIC settings. So, we can remove the C version of the GIC setup code, instead rely on GIC information provided by DT. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: armadillo800eva: Use DT for GICKuninori Morimoto
Current Armadillo800eva is using DT booting, and r8a7740.dtsi already has GIC settings. So, we can remove the C version of the GIC setup code, instead rely on GIC information provided by DT. This patch removes r8a7740_init_irq() which has no user any more Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-05ARM: shmobile: Mount root file systems in r/w mode for all DT platformsLaurent Pinchart
The shmobile DT files available in the kernel are reference implementations intended to be used as sample code, as well as for development. As such, it makes sense to mount the root file system in read/write mode by default. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31ARM: shmobile: emev2: add PMU information to emev2.dtsiMagnus Damm
Add PMU information to emev2.dtsi. With this included KZM9D DT reference may use the PMU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31ARM: shmobile: sh73a0: add PMU information to sh73a0.dtsiMagnus Damm
Add PMU information to sh73a0.dtsi. With this included KZM9G DT reference may use the PMU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31ARM: shmobile: r8a7740: add PMU information to r8a7740.dtsiMagnus Damm
Add PMU information to r8a7740.dtsi. With this included Armadillo800eva DT reference may use the PMU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30ARM: shmobile: r8a7779: Remove '0x's from R8A7779 DTS fileLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30ARM: shmobile: r8a7779: Rely on DT for SMP CPU infoSimon Horman
Remove r8a7779 specific ->smp_init_cpus() callback and instead of relying on shmobile_smp_init_cpus() simply use DT for CPU core information. Based on work for the sh73a0 by Magnus Damm. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30ARM: shmobile: marzen: Switch to DT_MACHINE_STARTMagnus Damm
Convert the marzen board to use DT_MACHINE_START. With this in place all mach-shmobile boards use DT_MACHINE_START. Also, this makes it possible for the r8a7779 SMP code to use DT for CPUs. Signed-off-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: Select USE_OF in Kconfig] [horms+renesas@verge.net.au: Provide dt_compat in DT_MACHINE_START] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30ARM: shmobile: marzen: Add r8a7779-marzen.dtbSimon Horman
This is in preparation for converting the marzen board to use DT_MACHINE_START. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30ARM: shmobile: r8a7779: cleanup registration of usb phyKuninori Morimoto
usb phy driver which needs platform data at the time of registration is used from Marzen only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30ARM: shmobile: ape6evm-reference: switch PFC to DTGuennadi Liakhovetski
PFC pinctrl configuration can now be performed via DT. Update ape6evm-reference to use this. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-26ARM: shmobile: sh73a0: Rely on DT for SMP CPU infoMagnus Damm
Remove sh73a0 specific ->smp_init_cpus() callback and instead of relying on shmobile_smp_init_cpus() simply use DT for CPU core information. This assumes that DT_MACHINE_START is used which is the case when AG5EVM and Kota2 are removed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-26ARM: shmobile: bockw: add DT referenceKuninori Morimoto
This patch adds a sample DT-based Bock-W "reference" implementation. The use of platform-specific C-code should be avoided with this configuration as much as possible. This patch adds new r8a7778_add_dt_devices() which was same stance of r8a7790_add_dt_devices() Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-25ARM: shmobile: No need to use INTC header on r8a7779Magnus Damm
Now when the intc-irqpin driver is used for external IRQ pins on r8a7779 it possible to get rid of unused INTC headers mach/intc.h and linux/sh_intc.h. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-25ARM: shmobile: No need to use INTC demux on r8a7740Magnus Damm
Now when the r8a7740 code has been converted to make use of GIC instead of INTC for root interrupt controller it is possible to exclude the low level INTC demux function shmobile_handle_irq_intc from linking. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-25ARM: shmobile: Use pm-rmobile on sh7372 and r8a7740 onlyMagnus Damm
The functions in pm-rmobile.c are only used on sh7372 and r8a7740, so adjust the Makefile to only link in that file in case those SoCs are selected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: r8a73a4: Remove ->init_machine() special caseMagnus Damm
No need to special case r8a73a4 ->init_machine(), so get rid of undesired cpufreq platform device from the generic long term r8a73a4 DT support code. For short term support on APE6EVM the DT reference implementation already adds a "cpufreq-cpu0" platform device so that can be used for development. Regarding more long term cpufreq support, perhaps it makes sense to adjust the cpufreq driver to check for DT information directly instead of using a platform device for software configuration and DT for hardware parameters. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove include <mach/hardware.h>Magnus Damm
Now when no one is using this file, remove <mach/hardware.h>. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove Marzen use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on Marzen. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove r8a7779 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on r8a7779. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove EMEV2 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on EMEV2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove sh7372 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on sh7372. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove sh73a0 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on sh73a0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARCH: ARM: shmobile: Remove ag5evm board supportSimon Horman
Remove support for the sh73a0 based ag5evm board. The sh73a0 SoC is continued to be supported using the kzm9g board. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARCH: ARM: shmobile: Remove kota2 board supportSimon Horman
Remove support for the sh73a0 based kota2 board. The sh73a0 SoC is continued to be supported using the kzm9g board. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24Merge branches 'tpu-pwm', 'backlight' and 'soc' into cleanup2-baseSimon Horman
2013-07-23ARM: shmobile: lager-reference: Add LED6-LED8 to the device treeLaurent Pinchart
LED6 to LED8 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22leds: Remove leds-renesas-tpu driverLaurent Pinchart
The driver is superseded by the generic pwm-renesas-tpu driver used with leds-pwm. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-19ARM: shmobile: sh73a0: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-19ARM: shmobile: kota2: Use leds-pwm + pwm-rmobLaurent Pinchart
Instead of using the LED-specific TPU PWM driver, switch to the generic TPU PWM driver with leds-pwm. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-19ARM: shmobile: armadillo800eva: Add backlight supportLaurent Pinchart
The flat panel backlight on the Armadillo 800 EVA board is driven by the TPU PWM output. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Minor update for the Lager DT reference codeMagnus Damm
Update the Lager DT reference code to get rid of the redundant irqchip header and also make lager_add_standard_devices() static. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: lager: Add DT referenceSimon Horman
This is sufficient to allow boot of the Lager board with a console without boards-lager.c compiled into the kernel. This is an example of a minimal but still useful initialisation of the board using DT as much as possible. As such it is the same as the boot of Lager that can be achieved without a board file. The intention of adding this file is to facilitate further work to allow board specific devices to be initialised via DT. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: ape6evm-reference: add CPUFreq supportGuennadi Liakhovetski
Add CPUFreq support to ape6evm-reference, using a max8973 regulator, that is supplying V_DVFS for the 4 CA15 cores on r8a73a4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: ape6evm: add DT referenceGuennadi Liakhovetski
This patch adds a sample DT-based APE6EVM "reference" implementation. The use of platform-specific C-code should be avoided with this configuration as much as possible. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>