summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-06-11pktgen: increasing transmission granularityDaniel Turull
This patch increases the granularity of the rate generated by pktgen. The previous version of pktgen uses micro seconds (udelay) resolution when it was delayed causing gaps in the rates. It is changed to nanosecond (ndelay). Now any rate is possible. Also it allows to set, the desired rate in Mb/s or packets per second. The documentation has been updated. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11econet: fix lockingEric Dumazet
econet lacks proper locking. It holds econet_lock only when inserting or deleting an entry in econet_sklist, not during lookups. - convert econet_lock from rwlock to spinlock - use econet_lock in ec_listening_socket() lookup - use appropriate sock_hold() / sock_put() to avoid corruptions. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11pkt_sched: gen_kill_estimator() rcu fixesEric Dumazet
gen_kill_estimator() API is incomplete or not well documented, since caller should make sure an RCU grace period is respected before freeing stats_lock. This was partially addressed in commit 5d944c640b4 (gen_estimator: deadlock fix), but same problem exist for all gen_kill_estimator() users, if lock they use is not already RCU protected. A code review shows xt_RATEEST.c, act_api.c, act_police.c have this problem. Other are ok because they use qdisc lock, already RCU protected. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11bnx2: Fix compiler warning in bnx2_disable_forced_2g5().Michael Chan
drivers/net/bnx2.c: In function 'bnx2_disable_forced_2g5': drivers/net/bnx2.c:1489: warning: 'bmcr' may be used uninitialized in this function We fix it by checking return values from all bnx2_read_phy() and proceeding to do read-modify-write only if the read operation is successful. The related bnx2_enable_forced_2g5() is also fixed the same way. Reported-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11enic: cleanup vic_provinfo_alloc()Dan Carpenter
If oui were a null variable then vic_provinfo_alloc() would leak memory. But this function is only called from one place and oui is not null so I removed the check. I also moved the memory allocation down a line so it was easier to spot. (No one ever reads variable declarations). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-06-11ethoc: use devres resource managementJonas Bonn
The point of using the devres resource management routines is that they simplify the driver by taking care of releasing resources on failure and release. A recent commit added a bunch of error handling that is unnecessary in this context. This patch removes this redundant error handling, as well as using dmam_alloc_coherent in place of dma_alloc_coherent in order to use this framework consistenly throughout the driver. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11ethoc: Clear command buffer after writeJonas Bonn
This matches what ethoc_mdio_read does and makes the functions symmetric. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11Remove unused variableJonas Bonn
Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11ethoc: Clean up PHY probingJonas Bonn
- No need to iterate over all possible addresses on bus - Use helper function phy_find_first - Use phy_connect_direct as we already have the relevant structure Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11ethoc: write number of TX buffers in init_ringJonas Bonn
This moves the write of the TX_BD_NUM to init_ring together with the rest of the code setting up the transmission buffers. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11ethoc: Write bus addresses to registersJonas Bonn
The ethoc driver should be writing bus addresses to the ethoc registers, not virtual addresses. This patch adds an array to store the virtual addresses in and references that array when manipulating the contents of the buffer descriptors. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11ethoc: calculate number of buffers in ethoc_probeJonas Bonn
This moves the calculation of the number of transmission buffers to ethoc_probe where it more logically fits with the rest of the memory allocation code. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11Merge branch 'wimax-2.6.35.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2010-06-11wimax/i2400m: fix missing endian correction read in fw loaderInaky Perez-Gonzalez
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2010-06-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-10net-next: remove useless union keywordChangli Gao
remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10net8139: fix a race at the end of NAPIFigo.zhang
fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10pktgen: Fix accuracy of inter-packet delay.Daniel Turull
This patch correct a bug in the delay of pktgen. It makes sure the inter-packet interval is accurate. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10pkt_sched: gen_estimator: add a new lockEric Dumazet
gen_kill_estimator() / gen_new_estimator() is not always called with RTNL held. net/netfilter/xt_RATEEST.c is one user of these API that do not hold RTNL, so random corruptions can occur between "tc" and "iptables". Add a new fine grained lock instead of trying to use RTNL in netfilter. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10ip: ip_ra_control() rcu fixEric Dumazet
commit 66018506e15b (ip: Router Alert RCU conversion) introduced RCU lookups to ip_call_ra_chain(). It missed proper deinit phase : When ip_ra_control() deletes an ip_ra_chain, it should make sure ip_call_ra_chain() users can not start to use socket during the rcu grace period. It should also delay the sock_put() after the grace period, or we risk a premature socket freeing and corruptions, as raw sockets are not rcu protected yet. This delay avoids using expensive atomic_inc_not_zero() in ip_call_ra_chain(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10net: deliver skbs on inactive slaves to exact matchesJohn Fastabend
Currently, the accelerated receive path for VLAN's will drop packets if the real device is an inactive slave and is not one of the special pkts tested for in skb_bond_should_drop(). This behavior is different then the non-accelerated path and for pkts over a bonded vlan. For example, vlanx -> bond0 -> ethx will be dropped in the vlan path and not delivered to any packet handlers at all. However, bond0 -> vlanx -> ethx and bond0 -> ethx will be delivered to handlers that match the exact dev, because the VLAN path checks the real_dev which is not a slave and netif_recv_skb() doesn't drop frames but only delivers them to exact matches. This patch adds a sk_buff flag which is used for tagging skbs that would previously been dropped and allows the skb to continue to skb_netif_recv(). Here we add logic to check for the deliver_no_wcard flag and if it is set only deliver to handlers that match exactly. This makes both paths above consistent and gives pkt handlers a way to identify skbs that come from inactive slaves. Without this patch in some configurations skbs will be delivered to handlers with exact matches and in others be dropped out right in the vlan path. I have tested the following 4 configurations in failover modes and load balancing modes. # bond0 -> ethx # vlanx -> bond0 -> ethx # bond0 -> vlanx -> ethx # bond0 -> ethx | vlanx -> -- Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09ipv6: fix ICMP6_MIB_OUTERRORSEric Dumazet
In commit 1f8438a85366 (icmp: Account for ICMP out errors), I did a typo on IPV6 side, using ICMP6_MIB_OUTMSGS instead of ICMP6_MIB_OUTERRORS Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09ipv6: mcast: RCU conversionsEric Dumazet
- ipv6_sock_mc_join() : doesnt touch dev refcount - ipv6_sock_mc_drop() : doesnt touch dev/idev refcounts - ip6_mc_find_dev() becomes ip6_mc_find_dev_rcu() (called from rcu), and doesnt touch dev/idev refcounts - ipv6_sock_mc_close() : doesnt touch dev/idev refcounts - ip6_mc_source() uses ip6_mc_find_dev_rcu() - ip6_mc_msfilter() uses ip6_mc_find_dev_rcu() - ip6_mc_msfget() uses ip6_mc_find_dev_rcu() - ipv6_dev_mc_dec(), ipv6_chk_mcast_addr(), igmp6_event_query(), igmp6_event_report(), mld_sendpack(), igmp6_send() dont touch idev refcount Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09cleanup: remove pppoe_xmit() declaration.Rami Rosen
There is no need for pppoe_xmit() forward declaration in drivers/net/pppoe.c. This patch removes this pppoe_xmit() declaration. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09icmp: RCU conversion in icmp_address_reply()Eric Dumazet
- rcu_read_lock() already held by caller - use __in_dev_get_rcu() instead of in_dev_get() / in_dev_put() - remove goto out; Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09r8169: fix mdio_read and update mdio_write according to hw specsTimo Teräs
Realtek confirmed that a 20us delay is needed after mdio_read and mdio_write operations. Reduce the delay in mdio_write, and add it to mdio_read too. Also add a comment that the 20us is from hw specs. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09Merge branch 'num_rx_queues' of git://kernel.ubuntu.com/rtg/net-2.6David S. Miller
2010-06-09gianfar: Revive the driver for eTSEC devices (disable timestamping)Anton Vorontsov
Since commit cc772ab7cdcaa24d1fae332d92a1602788644f7a ("gianfar: Add hardware RX timestamping support"), the driver no longer works on at least MPC8313ERDB and MPC8568EMDS boards (and possibly much more boards as well). That's how MPC8313 Reference Manual describes RCTRL_TS_ENABLE bit: Timestamp incoming packets as padding bytes. PAL field is set to 8 if the PAL field is programmed to less than 8. Must be set to zero if TMR_CTRL[TE]=0. I see that the commit above sets this bit, but it doesn't handle TMR_CTRL. Manfred probably had this bit set by the firmware for his boards. But obviously this isn't true for all boards in the wild. Also, I recall that Freescale BSPs were explicitly disabling the timestamping because of a performance drop. For now, the best way to deal with this is just disable the timestamping, and later we can discuss proper device tree bindings and implement enabling this feature via some property. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09caif: fix a couple range checksDan Carpenter
The extra ! character means that these conditions are always false. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09phylib: Add support for the LXT973 phy.Richard Cochran
This patch implements a work around for Erratum 5, "3.3 V Fiber Speed Selection." If the hardware wiring does not respect this erratum, then fiber optic mode will not work properly. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09phonet: use call_rcu for phonet device freeJiri Pirko
Use call_rcu rather than synchronize_rcu. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09net: Print num_rx_queues imbalance warning only when there are allocated queuesTim Gardner
BugLink: http://bugs.launchpad.net/bugs/591416 There are a number of network drivers (bridge, bonding, etc) that are not yet receive multi-queue enabled and use alloc_netdev(), so don't print a num_rx_queues imbalance warning in that case. Also, only print the warning once for those drivers that _are_ multi-queue enabled. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2010-06-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-08mac80211: fix deauth before assocJohannes Berg
When we receive a deauthentication frame before having successfully associated, we neither print a message nor abort assocation. The former makes it hard to debug, while the latter later causes a warning in cfg80211 when, as will typically be the case, association timed out. This warning was reported by many, e.g. in https://bugzilla.kernel.org/show_bug.cgi?id=15981, but I couldn't initially pinpoint it. I verified the fix by hacking hostapd to send a deauth frame instead of an association response. Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08iwlwifi: add missing rcu_read_lockJohannes Berg
Using ieee80211_find_sta() needs to be under RCU read lock, which iwlwifi currently misses, so fix it. Cc: stable@kernel.org Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08wl1251: fix ELP_CTRL register readsGrazvydas Ignotas
Reading the ELP_CTRL register with sdio_readb causes problems because hardware seems to be performing a write using stuff bits in the request (those bits contain write data in write request). This indicates that it actually expects RAW (read after write) type of request, so perform that when reading ELP_CTRL instead. Also cache last written value so we know what to write when doing RAW request. Because of the above it was not possible to wake the chip from ELP power saving mode, PM had to be disabled to have the driver usable in SDIO mode. After this patch PM is functional. For backporting to 2.6.34 or earlier, this patch depends on 6c1f716e8154ee9315534782b9b1eedea0559a24, which adds the required SDIO funcion. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08wireless: fix kernel-docJohannes Berg
Fix a whole bunch of kernel-doc warnings and errors that crop up when running it on mac80211 and cfg80211; the latter isn't normally done so lots of bit-rot happened. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08mac80211: Add netif state checking to ieee80211_ifa_changedJuuso Oikarinen
There's a window for ieee80211_ifa_changed() to get called whilst the managed mode mutex has not been initialized when opening and stopping the interface. Currently this causes a kernel BUG like the following: [ 132.460013] kernel BUG at /home/wifi/iwlwifi-2.6/net/mac80211/main.c:380! [ 132.460013] invalid opcode: 0000 [#1] SMP The mutex is initialized during open(), hence once netif_running() is true, the mutex should be valid. Fix by adding a netif_running() check to the function. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08ath5k: add debugfs file for queue debuggingBruno Randolf
Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08ath5k: no need to save/restore the default antennaBruno Randolf
Since ath5k_hw_set_antenna_mode() always writes the default antenna register and is called at the end of reset, there is no need to separately save and restore the default antenna. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08ath5k: new function for setting the antenna switch tableBruno Randolf
Collect all pieces concering the antenna switch table into one function. Previously it was split up between ath5k_hw_reset() and ath5k_hw_commit_eeprom_settings(). Also we need to set the antenna switch table when ath5k_hw_set_antenna_mode() is called manually (by "iw phy0 antenna set", for example). I'm not sure if we need to set the switchtable at the same place in ath5k_hw_reset() as it was before - it is set later thru ath5k_hw_set_antenna_mode() anyways - but i leave it there to avoid problems(?). Plus print switchtable registers in the debugfs file. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08ath5k: update AR5K_PHY_RESTART_DIV_GC values to match masksBruno Randolf
#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 is 3 bit wide. The previous values of 0xc and 0x8 are 4bit wide and bigger than the mask. Writing 0 and 1 to AR5K_PHY_RESTART_DIV_GC is consistent with the comments and initvals we have in the HAL. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08libertas: Fix ethtool reporting no WOL options supported if WOL is not ↵Sascha Silbe
already active This patch fixes the libertas driver incorrectly reporting that Wake-on-LAN is not supported if Wake-on-LAN is currently disabled. Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-07anycast: Some RCU conversionsEric Dumazet
- dev_get_by_flags() changed to dev_get_by_flags_rcu() - ipv6_sock_ac_join() dont touch dev & idev refcounts - ipv6_sock_ac_drop() dont touch dev & idev refcounts - ipv6_sock_ac_close() dont touch dev & idev refcounts - ipv6_dev_ac_dec() dount touch idev refcount - ipv6_chk_acast_addr() dont touch idev refcount Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07net: avoid two atomic ops in ip_rcv_options()Eric Dumazet
in_dev_get() -> __in_dev_get_rcu() in a rcu protected function. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07ipv4: avoid two atomic ops in ip_rt_redirect()Eric Dumazet
in_dev_get() -> __in_dev_get_rcu() in a rcu protected function. [ Fix build with CONFIG_IP_ROUTE_VERBOSE disabled. -DaveM ] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07igmp: avoid two atomic ops in igmp_rcv()Eric Dumazet
in_dev_get() -> __in_dev_get_rcu() in a rcu protected function. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07ip: Router Alert RCU conversionEric Dumazet
Straightforward conversion to RCU. One rwlock becomes a spinlock, and is static. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-07macvlan: use call_rcu for port freeJiri Pirko
Use call_rcu rather than synchronize_rcu. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-27 12:15:19 +0000