summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-03-27Add Merisc board supportJonas Larsson
Merisc is the family name for a range of AVR32-based boards. The boards are designed to be used in a man-machine interfacing environment, utilizing a touch-based graphical user interface. They host a vast range of I/O peripherals as well as a large SDRAM & Flash memory bank. For more information see: http://www.martinsson.se/merisc Signed-off-by: Jonas Larsson <jonas.larsson@martinsson.se> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: use gpio_is_valid() to check USBA vbus_pin I/O lineHans-Christian Egtvedt
This patch will use gpio_is_valid() to check the vbus_pin I/O line. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O lineHans-Christian Egtvedt
This patch will convert to use gpio_is_valid() to check the vbus_pin platform data. It will also default to -ENODEV if no vbus_pin is defined. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: fix timing LCD parameters for EVKLCD10X boardsHans-Christian Egtvedt
This patch adjusts the timing parameters for the Kyocera LCD panels connected on the EVKLCD10X addon boards. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: use GPIO line PB15 on EVKLCD10x boards for backlightHans-Christian Egtvedt
The PB15 GPIO line is used to control the enable and disable signal for the backlight regulator on EVKLCD10x boards. This patch hands the I/O line over to the LCDC driver, which will control when to enable and disable the backlight. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> [haavard.skinnemoen@atmel.com: reverted ac97c change] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: configure MCI detect and write protect pins for EVKLCD10x boardsHans-Christian Egtvedt
This patch removes the special handling of MCI platform data for EVKLCD10x boards. This is now possible since the pin mask for the LCD controller is no longer reserving the I/O lines used for MCI card detection and write protect. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: set pin mask to alternative 18 bpp for EVKLCD10x boardsHans-Christian Egtvedt
This patch will set the pin mask to alternative 18 bits per pixel output for EVKLCD10x boards. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: add pin mask for 18-bit color on the LCD controllerHans-Christian Egtvedt
This patch adds two defines for setting a pin mask for 18-bit LCD panels connected to the LCD controller. One mask for primary output and one mask for alternative output. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26avr32: fix 15-bit LCDC pin mask to use MSB linesHans-Christian Egtvedt
This patch corrects the 15-bit LCDC pin mask definitions to select the five upper lines in each color byte from the LCDC data output. When reducing the color depth the LCDC will start filling MSB and downwards. Also only enable 5 bits per color as the define indicates. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-24avr32: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/avr32/boards/hammerhead/flash.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Alex Raimondi <mailinglist@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-16avr32: fix out-of-range rjmp instruction on large kernelsHaavard Skinnemoen
Use .subsection to place fixups closer to their jump targets. This increases the maximum size of the kernel before we get link errors significantly. The problem here is that we don't have a "call"-ish pseudo-instruction to use instead of rjmp...we could add one, but that means we'll have to wait for a new toolchain release, wait until we're fairly sure most people are using it, etc... As an added bonus, it should decrease the RAM footprint slightly, though it might pollute the icache a bit more. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-16avr32: Fix out-of-range rcalls in large kernelsBen Nizette
Replace handcoded rcall instructions with the call pseudo-instruction. For kernels too far over 1MB the rcall instruction can't reach and linking will fail. We already call the final linker with --relax which converts call pseudo-instructions to the right things anyway. This fixes arch/avr32/kernel/built-in.o: In function `syscall_exit_work': (.ex.text+0x198): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o arch/avr32/kernel/built-in.o: In function `fault_exit_work': (.ex.text+0x3b6): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o But I'm still left with arch/avr32/kernel/built-in.o:(.fixup+0x2): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+45a arch/avr32/kernel/built-in.o:(.fixup+0x8): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+8ea arch/avr32/kernel/built-in.o:(.fixup+0xe): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+abe arch/avr32/kernel/built-in.o:(.fixup+0x14): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ac8 arch/avr32/kernel/built-in.o:(.fixup+0x1a): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ad2 arch/avr32/kernel/built-in.o:(.fixup+0x20): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+adc arch/avr32/kernel/built-in.o:(.fixup+0x26): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ae6 arch/avr32/kernel/built-in.o:(.fixup+0x2c): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+af0 arch/avr32/kernel/built-in.o:(.fixup+0x32): additional relocation overflows omitted from the output These are caused by a similar problem with 'rjmp' instructions. Unfortunately, there's no easy fix for these at the moment since we don't have a arbitrary-range 'jmp' instruction similar to 'call'. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-15Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: sched_slice() fixlet sched: fix update_min_vruntime sched: SCHED_OTHER vs SCHED_IDLE isolation sched: SCHED_IDLE weight change sched: fix bandwidth validation for UID grouping Revert "sched: improve preempt debugging"
2009-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build failure.
2009-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits) b44: GFP_DMA skb should not escape from driver korina: do not use IRQF_SHARED with IRQF_DISABLED korina: do not stop queue here korina: fix handling tx_chain_tail korina: do tx at the right position korina: do schedule napi after testing for it korina: rework korina_rx() for use with napi korina: disable napi on close and restart korina: reset resource buffer size to 1536 korina: fix usage of driver_data bnx2x: First slow path interrupt race bnx2x: MTU Filter bnx2x: Indirection table initialization index bnx2x: Missing brackets bnx2x: Fixing the doorbell size bnx2x: Endianness issues bnx2x: VLAN tagged packets without VLAN offload bnx2x: Protecting the link change indication bnx2x: Flow control updated before reporting the link bnx2x: Missing mask when calculating flow control ...
2009-01-15Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX hwmon: (abituguru3) Match partial DMI board name strings hwmon: Add a driver for the ADT7475 hardware monitoring chip hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs hwmon: (k8temp) Warn about fam F rev F errata
2009-01-159p: disallow RDMA if RDMA CM isn't availableRoland Dreier
If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set to n and the RDMA CM functions rdma_connect() et al are not built. However, the current config dependencies allow NET_9P_RDMA to be selected in this, which leads to a build failure. Fix this by adding a dependency on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15ext2: also update the inode on disk when dir is IS_DIRSYNCJan Kara
We used to just write changed page for IS_DIRSYNC inodes. But we also have to update the directory inode itself just for the case that we've allocated a new block and changed i_size. [akpm@linux-foundation.org: still sync the data page] Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y buildDavid Brownell
Carry out the PM-routine interface change in the USB OTG pathway. This was omitted from the earlier interface-change patch by mistake. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15include of <linux/types.h> is preferred over <asm/types.h>Jaswinder Singh Rajput
Impact: fix 15 make headers_check warnings: include of <linux/types.h> is preferred over <asm/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15memcg: fix a race when setting memory.swappinessLi Zefan
(suppose: memcg->use_hierarchy == 0 and memcg->swappiness == 60) echo 10 > /memcg/0/swappiness | mem_cgroup_swappiness_write() | ... | echo 1 > /memcg/0/use_hierarchy | mkdir /mnt/0/1 | sub_memcg->swappiness = 60; memcg->swappiness = 10; | In the above scenario, we end up having 2 different swappiness values in a single hierarchy. We should hold cgroup_lock() when cheking cgrp->children list. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15memcg: fix section mismatchLi Zefan
At system boot when creating the top cgroup, mem_cgroup_create() calls enable_swap_cgroup() which is marked as __init, so mark mem_cgroup_create() as __ref to avoid false section mismatch warning. Reported-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15hp_accel: do not call ACPI from invalid contextPavel Machek
The LED on HP notebooks is connected through ACPI. That unfortunately means that it needs to be delayed by using schedule_work() to avoid calling the ACPI interpreter from an invalid context. [akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it] Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15lis3: fix documentation to fit into 80 columnsPavel Machek
Fix lis3 documentation to fit into 80 columns. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15lis3lv02d: merge with leds hp diskEric Piel
Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15lib/idr.c: use kmem_cache_zalloc() for the idr_layer cacheAndrew Morton
David points out that the idr_remove_all() function returns unused slabs to the kmem cache, but needs to zero them first or else they will be uninitialized upon next use. This causes crashes which have been observed in the firewire subsystem. He fixed this by zeroing the object before freeing it in idr_remove_all(). But we agree that simply removing the constructor and zeroing the object at allocation time is simpler than relying upon slab constructor machinery and might even be faster. This problem was introduced by "idr: make idr_remove rcu-safe" (commit cf481c20c476ad2c0febdace9ce23f5a4db19582), which was first released in 2.6.27. There are no known codesites which trigger this bug in 2.6.27 or 2.6.28. The post-2.6.28 firewire changes are the only known triggerer. There might of course be not-yet-discovered triggerers in 2.6.27 and 2.6.28, and there might be out-of-tree triggerers which are added to those kernel versions. I'll let the -stable guys decide whether they want to backport this fix. Reported-by: David Moore <dcm@acm.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Kristian Hgsberg <krh@redhat.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15alpha: make pte_alloc_one_kernel() inlineIvan Kokshaysky
As it's just a single call to __get_free_page(). Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15alpha: .gitignore vmlinux.ldsIvan Kokshaysky
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15alpha: fix RTC on marvelIvan Kokshaysky
Unlike other alphas, marvel doesn't have real PC-style CMOS clock hardware - RTC accesses are emulated via PAL calls. Unfortunately, for unknown reason these calls work only on CPU #0. So current implementation for arbitrary CPU makes CMOS_READ/WRITE to be executed on CPU #0 via IPI. However, for obvious reason this doesn't work with standard get/set_rtc_time() functions, where a bunch of CMOS accesses is done with disabled interrupts. Solved by making the IPI calls for entire get/set_rtc_time() functions, not for individual CMOS accesses. Which is also a lot more effective performance-wise. The patch is largely based on the code from Jay Estabrook. My changes: - tweak asm-generic/rtc.h by adding a couple of #defines to avoid a massive code duplication in arch/alpha/include/asm/rtc.h; - sys_marvel.c: fix get/set_rtc_time() return values (Jay's FIXMEs). NOTE: this fixes *only* LIB_RTC drivers. Legacy (CONFIG_RTC) driver wont't work on marvel. Actually I think that we should just disable CONFIG_RTC on alpha (maybe in 2.6.30?), like most other arches - AFAIK, all modern distributions use LIB_RTC anyway. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15alpha: nautilus - fix hang on bootIvan Kokshaysky
Recently introduced generic pci_common_swizzle() relies on bus->self being NULL for the root PCI bus. But on nautilus bus->self points to the host bridge device, which is necessary as we do a root bus sizing on this system. As a result, pci_common_swizzle() loops infinitely. This worked until 2.6.29-rc1 because the alpha-specific swizzle routine checked for bus->parent == NULL (instead of bus->self). Fixed by clearing bus->self after bus sizing is done. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15alpha: nautilus - fix compile failure with gcc-4.3Ivan Kokshaysky
init_srm_irq() deals with irq's #16 and above, but size of irq_desc array on nautilus and some other system types is 16. So gcc-4.3 complains that "array subscript is above array bounds", even though this function is never called on those systems. This adds a check for NR_IRQS <= 16, which effectively optimizes init_srm_irq() code away on problematic platforms. Thanks to Daniel Drake <dsd@gentoo.org> for detailed analysis of the problem. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15revert "mm: vmalloc use mutex for purge"Andrew Morton
Revert commit e97a630eb0f5b8b380fd67504de6cedebb489003 ("mm: vmalloc use mutex for purge") Bryan Donlan reports: : After testing 2.6.29-rc1 on xen-x86 with a btrfs root filesystem, I : got the OOPS quoted below and a hard freeze shortly after boot. : Boot messages and config are attached. : : ------------[ cut here ]------------ : Kernel BUG at c05ef80d [verbose debug info unavailable] : invalid opcode: 0000 [#1] SMP : last sysfs file: /sys/block/xvdc/size : Modules linked in: : : Pid: 0, comm: swapper Not tainted (2.6.29-rc1 #6) : EIP: 0061:[<c05ef80d>] EFLAGS: 00010087 CPU: 2 : EIP is at schedule+0x7cd/0x950 : EAX: d5aeca80 EBX: 00000002 ECX: 00000000 EDX: d4cb9a40 : ESI: c12f5600 EDI: d4cb9a40 EBP: d6033fa4 ESP: d6033ef4 : DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 : Process swapper (pid: 0, ti=d6032000 task=d6020b70 task.ti=d6032000) : Stack: : 000d85bc 00000000 000186a0 00000000 0dd11410 c0105417 c12efe00 0dc367c3 : 00000011 c0105d46 d5a5d310 deadbeef d4cb9a40 c07cc600 c05f1340 c12e0060 : deadbeef d6020b70 d6020d08 00000002 c014377d 00000000 c12f5600 00002c22 : Call Trace: : [<c0105417>] xen_force_evtchn_callback+0x17/0x30 : [<c0105d46>] check_events+0x8/0x12 : [<c05f1340>] _spin_unlock_irqrestore+0x20/0x40 : [<c014377d>] hrtimer_start_range_ns+0x12d/0x2e0 : [<c014c4f6>] tick_nohz_restart_sched_tick+0x146/0x160 : [<c0107485>] cpu_idle+0xa5/0xc0 and bisected it to this commit. Let's remove it now while we have a think about the problem. Reported-by: Bryan Donlan <bdonlan@gmail.com> Tested-by: Christophe Saout <christophe@saout.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15memcg: make oom less frequentlyDaisuke Nishimura
In previous implementation, mem_cgroup_try_charge checked the return value of mem_cgroup_try_to_free_pages, and just retried if some pages had been reclaimed. But now, try_charge(and mem_cgroup_hierarchical_reclaim called from it) only checks whether the usage is less than the limit. This patch tries to change the behavior as before to cause oom less frequently. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15memcg: fix hierarchical reclaimDaisuke Nishimura
If root_mem has no children, last_scaned_child is set to root_mem itself. But after some children added to root_mem, mem_cgroup_get_next_node can mem_cgroup_put the root_mem although root_mem has not been mem_cgroup_get. This patch fixes this behavior by: - Set last_scanned_child to NULL if root_mem has no children or DFS search has returned to root_mem itself(root_mem is not a "child" of root_mem). Make mem_cgroup_get_first_node return root_mem in this case. There are no mem_cgroup_get/put for root_mem. - Rename mem_cgroup_get_next_node to __mem_cgroup_get_next_node, and mem_cgroup_get_first_node to mem_cgroup_get_next_node. Make mem_cgroup_hierarchical_reclaim call only new mem_cgroup_get_next_node. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15memcg: fix error path of mem_cgroup_move_parentDaisuke Nishimura
There is a bug in error path of mem_cgroup_move_parent. Extra refcnt got from try_charge should be dropped, and usages incremented by try_charge should be decremented in both error paths: A: failure at get_page_unless_zero B: failure at isolate_lru_page This bug makes this parent directory unremovable. In case of A, rmdir doesn't return, because res.usage doesn't go down to 0 at mem_cgroup_force_empty even after all the pc in lru are removed. In case of B, rmdir fails and returns -EBUSY, because it has extra ref counts even after res.usage goes down to 0. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15memcg: fix mem_cgroup_get_reclaim_stat_from_pageDaisuke Nishimura
In case of swapin, a new page is added to lru before it is charged, so page->pc->mem_cgroup points to NULL or last mem_cgroup the page was charged before. In the latter case, if the mem_cgroup has already freed by rmdir, the area pointed to by page->pc->mem_cgroup may have invalid data. Actually, I saw general protection fault. general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map CPU 4 Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode] Pid: 26038, comm: page01 Tainted: G W 2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1 RIP: 0010:[<ffffffff8028e710>] [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42 RSP: 0000:ffff8801ee457da8 EFLAGS: 00010002 RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8 RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28 RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001 R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000 R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2 FS: 00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960) Stack: ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17 ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000 ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8 Call Trace: [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89 [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98 [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741 [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff804d860f>] ? page_fault+0x1f/0x30 Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54 RIP [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42 RSP <ffff8801ee457da8> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15hwmon: applesmc: fix light sensor readings on newer MacBooksAlex Murray
The light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later) changed to report 10 bytes instead the earlier 6, and the sensor encoding subsequently changed. As a result, the reported light sensors readings are much too low. Via experiments leading up to this patch, it seems only the ALV0 is reporting data, and the most useful value therein is a 10-bit big-endian value at offset 6. This suggests that a new protocol was added as a backward-compatible replacement on top of the old one. This patch makes applesmc report the improved light sensor reading for the new machines, on a scale in conformance with earlier ones. Signed-off-by: Alex Murray <murray.alex@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15checkpatch: version: 0.27Andy Whitcroft
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15checkpatch: struct seq_operations should normally be constAndy Whitcroft
In the general use case struct seq_operations should be a const object. Check for and warn where it is not. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15checkpatch: if should not continue a preceeding braceAndy Whitcroft
We should not be continuing a braced section with an if, for example: if (...) { } if (...) { } Detect this and suggest adding a newline. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15checkpatch: allow parentheses on return handle array valuesAndy Whitcroft
When we allow return to have surrounding parentheses when containing comparison operators we are not correctly handling the case where the values contain array sufffixes. Squash them. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15checkpatch: type/cast spacing should not check prefix spacingAndy Whitcroft
We should not be complaining about the prefix spacing for types and casts. We are triggering here because the check for spacing between '*'s is overly loose. Tighten this up. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15checkpatch: handle missing #if open in contextAndy Whitcroft
If the #if opening statement is not in the context then the context stack can be empty. Handle this by ensuring there is always a blank entry in the stack. Signed-off-by: Andy Whitcroft <apw@canonical.com> Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15nbd: do not allow two clients at the same timePavel Machek
Two nbd-clients at same time are bad idea, and cause WARN_ON from nbd in 2.6.28-rc7 from sysfs_add_one. This simply prevents that from happening. To reproduce: cat /dev/zero | head -c 10000000 > /tmp/delme.fstest.fs nbd-server 9100 -l /anyone.can.connect > /tmp/delme.fstest.fs & sleep 1 nbd-client localhost 9100 /dev/nd0 & nbd-client localhost 9100 /dev/nd0 & Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15btrfs & squashfs: Move btrfs and squashfsto's magic number to <linux/magic.h>Qinghuang Feng
Use the standard magic.h for btrfs and squashfs. Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15MAINTAINERS: add entry for freezerPavel Machek
Now that people are using freezer for non-suspend/hibernation stuff, it should have separate maintainers entry so that it is easier to find. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15resources: fix parameter name and kernel-docRandy Dunlap
Fix __request_region() parameter kernel-doc notation and parameter name: Warning(linux-2.6.28-git10//kernel/resource.c:627): No description found for parameter 'flags' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15jbd: fix missing kernel-docRandy Dunlap
Fix jbd header file kernel-doc notation: Warning(linux-2.6.28-git13//include/linux/jbd.h:823): No description found for parameter 'j_average_commit_time' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15Documentation/accounting/getdelays.c: fix endless loopMarcus Meissner
When no option is passed to getdelays it just hangs, waiting for a reply which will never come. This patch prints usage() when no output marker is specified. Signed-off-by: Marcus Meissner <meissner@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15idr: fix wrong kernel-docLi Zefan
idr_get_new_above() and ida_get_new_above() return an id in the range of @staring_id ... 0x7fffffff, not 0 ... 0x7fffffff. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 02:30:16 +0000