summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-02-06[ARM] orion5x: remove TS-78xx NOR support as it does not existAlexander Clouter
The TS-7800's M25P40 is not available to the kernel, it's used to load the initial bitstream onto the FPGA and so these hooks point to nothing and need to be removed. Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
2009-02-06[ARM] orion5x: add rtc-m48t86 to orion5x_defconfigAlexander Clouter
The TS-7800 can have a M48T86 RTC onboard Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
2008-12-20[ARM] mv78xx0: implement GPIO and GPIO interrupt supportLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-20[ARM] Kirkwood: implement GPIO and GPIO interrupt supportLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-20[ARM] Orion: share GPIO IRQ handling codeLennert Buytenhek
Split off Orion GPIO IRQ handling code into plat-orion/. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-20[ARM] Orion: share GPIO handling codeLennert Buytenhek
Split off Orion GPIO handling code into plat-orion/, and add support for multiple sets of (32) GPIO pins. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-18[ARM] s3c: define __io using the typesafe versionRussell King
as per 0560cf5aa51216b06874333a2fa26ca034d97bdb Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-18Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
2008-12-18Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-12-18[ARM] S3C64XX: Ensure CPU_V6 is selectedBen Dooks
Select CPU_V6 with the S3C64XX series. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] 5349/1: VFP: Add PM code to save and restore current VFP stateBen Dooks
When CONFIG_PM is selected, the VFP code does not have any handler installed to deal with either saving the VFP state of the current task, nor does it do anything to try and restore the VFP after a resume. On resume, the VFP will have been reset and the co-processor access control registers are in an indeterminate state (very probably the CP10 and CP11 the VFP uses will have been disabled by the ARM core reset). When this happens, resume will break as soon as it tries to unfreeze the tasks and restart scheduling. Add a sys device to allow us to hook the suspend call to save the current thread state if the thread is using VFP and a resume hook which restores the CP10/CP11 access and ensures the VFP is disabled so that the lazy swapping will take place on next access. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-18[ARM] S3C: Remove unnecessary <linux/delay.h> includesBen Dooks
As per Russell King's last review comment, find and remove all unnecessary includes of <linux/delay.h> in the files that do not need them. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C24A0: Remove duplicate <mach/io.h> fileBen Dooks
The commit 39263db7986bf15c753f6847699107bdf5a2e318 added a default <mach/io.h> implementation which is shared if needed between all the s3c implementations. Remove the s3c24a0 version which is the same as this. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C: Remove cpufreq warnings for unset serial informationBen Dooks
As noted by Russell King, do not print any warnings if the uinfo or tty fields are not set when a CPU frequency change is sent. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C64XX: Remove __virt_to_bus/__bus_to_virt macrosBen Dooks
The changes for ARM highmem support have removed the need for the __virt_to_bus and __bus_to_virt macros, so remove them from this build. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C24XX: Add fourth UART definition for S3C2443Ben Dooks
Add the fourth UART definition for the S3C2443, and at the same time fixup the problems caused by the enlarging of the UART array in the previous commits. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C: Update CONFIG_SERIAL_SAMSUNG_UARTS handlingBen Dooks
Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places in the kernel where it had been missed. This finishes fixing a long standing issue where S3C2443 and S3C64XX could not use the 4th UART Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C: Update number of serial portsBen Dooks
Update the serial driver to handle the 4 ports of the S3C2443 and S364XX series. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18Merge branch 'next-s3c64xx-device' into next-mergedBen Dooks
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-18[ARM] MXC: do not include mach/hardware.h from mach/memory.hSascha Hauer
Instead of including other header files, define PHYS_OFFSET directly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MXC: do not include mach/hardware.h from mach/timex.hSascha Hauer
Instead of including other header files, define CLOCK_TICK_RATE directly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MXC: remove dependency to other include files from irqs.hSascha Hauer
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and switches to more meaningful names for the irq related macros. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MX1/MX2 DMA: add missing local_irq_restore()Sascha Hauer
This patch adds a missing call to local_irq_restore() and fixes some compiler warnings about unused variables for MX1. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18Merge branch 'next-s3c64xx' into next-mergedBen Dooks
2008-12-18Merge branch 'next-s3c24xx' into next-mergedBen Dooks
2008-12-18[ARM] AT2440EVB: LCD frame buffer support.Ben Dooks
Add LCD frame buffer support for AT2440EVB board. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C24XX: AT2440EVB MMCBen Dooks
Add SD/MMC support for AT2440EVB board. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] ANUBIS: Add SM501 GPIO and update I2C setupBen Dooks
Add GPIO support to the SM501 on the Simtec Anubis, and then add the necessary updates for allowing the two gpio I2C busses to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C24XX: Add extra GPIOs via KconfigBen Dooks
Add Kconfig entries to allow more GPIO space to be specified depending on the machine(s) selected. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] JIVE: fix spi gpio implementationBen Dooks
Fix the name of the driver, as well as the fact we are not passing the number of chipselects to the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C24XX: ADC driver coreBen Dooks
A common core driver for the S3C24XX ADC block so that the touchscreen, hwmon and any other drivers can share the resource. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] MX27ads: fix function nameSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MX1: Add missing selection of ARM920TSascha Hauer
The MX1 only has one possible CPU type, ARM920T. Select it in Kconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-17Merge branch 'rmk-devel-mxc-pu-v2' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel
2008-12-17Merge branch 'mxc-pu-imxfb' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel
2008-12-17Merge branch 'hsmmc-init' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-16i.MX Framebuffer: add TFT supportSascha Hauer
With TFTs we can do 5/6/5 instead of 4/4/4. Add a bitfield for this and use it with TFTs. Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX Framebuffer: rename imxfb_mach_info to imx_fb_platform_dataSascha Hauer
rename imxfb_mach_info to a name more common to kernel hackers Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX Framebuffer: Cleanup Coding styleSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX Framebuffer: remove header fileSascha Hauer
Move contents of imxfb.h to imxfb.c since it is used only in this file Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX Framebuffer: fix marginsSascha Hauer
The upper/lower and left/right margins are mixed up in the driver. Fix it Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX Framebuffer: Use readl/writel instead of direct pointer derefJuergen Beisert
This patch prepares the current i.MX1 framebuffer driver for usage in the whole i.MX family. It switches to readl/writel for register accesses. Also it moves the register definitions to the driver where they belong. Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX Framebuffer: remove gpio setup functionSascha Hauer
Remove the gpio mux setup function from i.MX framebuffer driver. This function is platform specific and thus should be done by the board setup. As there are currently no in-kernel users of this driver we do not break anything. Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16MAINTAINERS: Add myself as i.MX Framebuffer driver maintainerSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16Unused variable 'reg' removed.Claudio Scordino
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mxc-fiqPaulius Zaleckas
Drivers which are going to use it will have to select it and use mxc_set_irq_fiq() to set FIQ mode for this interrupt. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mx1-UART-supportPaulius Zaleckas
Adds support for MX1 architecture to UART driver. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mx1-mtd-xipDarius Augulis
Adds MTD XIP support for ARCH_MX1. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mx1-add-devicesDarius Augulis
Adds common devices to ARCH_MX1. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mxc-add-ARCH_MX1Paulius Zaleckas
Adds MX1 architecture to platform MXC. It will supersede mach-imx and let it die. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-22 07:35:58 +0000