summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-01-11Merge tag 'mfd-fixes-3.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull MFD fix from Samuel Ortiz: "This is the 2nd MFD pull request for 3.13 It only contains one fix for the rtsx_pcr driver. Without it we see a kernel panic on some machines, when resuming from suspend to RAM" * tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: rtsx_pcr: Disable interrupts before cancelling delayed works
2014-01-10Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "Late fixes for clock drivers. All of these fixes are for user-visible regressions, typically boot failures or other unsafe system configuration that causes badness" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: clk-divider: fix divisor > 255 bug clk: exynos: File scope reg_save array should depend on PM_SLEEP clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock ARM: dts: exynos5250: Fix MDMA0 clock number clk: samsung: exynos5250: Add MDMA0 clocks clk: samsung: exynos5250: Fix ACP gate register offset clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks clk: samsung: exynos4: Correct SRC_MFC register
2014-01-10Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for Renesas platforms to fixup DMA masks (this started causing errors once the DMA API added checks for valid masks in 3.13)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: mackerel: Fix coherent DMA mask ARM: shmobile: kzm9g: Fix coherent DMA mask ARM: shmobile: armadillo: Fix coherent DMA mask
2014-01-09Merge branch 'parisc-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "This patch fixes the kmap/kunmap implementation on parisc and finally makes AIO work on parisc" * 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Ensure full cache coherency for kmap/kunmap
2014-01-09Merge branch 'for-3.13-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Late fixes for libata. Nothing too interesting. Adding missing PM callbacks to satat_sis and an additional PCI ID for ahci" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_sis: missing PM support ahci: add PCI ID for Marvell 88SE9170 SATA controller
2014-01-08parisc: Ensure full cache coherency for kmap/kunmapJohn David Anglin
Helge Deller noted a few weeks ago problems with the AIO support on parisc. This change is the result of numerous iterations on how best to deal with this problem. The solution adopted here is to provide full cache coherency in a uniform manner on all parisc systems. This involves calling flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on kunmap operations. As a result, the copy_user_page() and clear_user_page() functions can be removed and the overall code is simpler. The change ensures that both userspace and kernel aliases to a mapped page are invalidated and flushed. This is necessary for the correct operation of PA8800 and PA8900 based systems which do not support inequivalent aliases. With this change, I have observed no cache related issues on c8000 and rp3440. It is now possible for example to do kernel builds with "-j64" on four way systems. On systems using XFS file systems, the patch recently posted by Mikulas Patocka to "fix crash using XFS on loopback" is needed to avoid a hang caused by an uninitialized lock passed to flush_dcache_page() in the page struct. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2014-01-08clk: clk-divider: fix divisor > 255 bugJames Hogan
Commit 6d9252bd9a4bb (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/nouveau/linux-2.6 into drm-fixes misc fixes for nouveau, one more msi rearm, regression fix for old bioses crash and leak fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/nouveau/linux-2.6: drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip() drm/nouveau/bios: fix offset calculation for BMPv1 bioses drm/nouveau: return offset of allocated notifier drm/nouveau/bios: make jump conditional drm/nvce/mc: fix msi rearm on GF114 drm/nvc0/gr: fix mthd data submission drm/nouveau: populate master subdev pointer only when fully constructed
2014-01-08Merge tag 'drm-intel-fixes-2014-01-08' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a revert (gen4 backlight seems a lost cause) and a tlb coherency fix for bdw, plus the patch to sign up Jani for co-maintainer. Thanks to Ben for taking care of -fixes while I've enjoyed a bit of vacation. * tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel: MAINTAINERS: Updates for drm/i915 Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" drm/i915/bdw: Flush system agent on gen8 also
2014-01-08drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip()Christian Engelmayer
Fix a memory leak in the nouveau_crtc_page_flip() error handling path. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-08drm/nouveau/bios: fix offset calculation for BMPv1 biosesIlia Mirkin
The only BIOS on record that needs the 14 offset has a bios major version 2 but BMP version 1.01. Another bunch of BIOSes that need the 18 offset have BMP version 2.01 or 5.01 or higher. So instead of looking at the bios major version, look at the BMP version. BIOSes with BMP version 0 do not contain a detectable script, so always return 0 for them. See https://bugs.freedesktop.org/show_bug.cgi?id=68835 Reported-by: Mauro Molinari <mauromol@tiscali.it> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07MAINTAINERS: Updates for drm/i915Daniel Vetter
Jani for co-maintainer! Jani has been a really active bug-scrubber in the past few months. I've asked him whether he wants to do this in a more official capacity and he agreed. I've already chatted with Dave and Jesse and they support this. Note that everyone can't now just relax because "Jani will do all the bug scrubbing" - au contraire expect more nagging and poking now that we have more bandwidth. Longer-term the plan is to share more of the maintainer duties, but we need to fix up the infrastructure a bit first (like moving the git repo to a common location). While at it also add the newly set-up patchwork instance. Cc: Dave Airlie <airlied@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/nouveau: return offset of allocated notifierBob Gleitsmann
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nouveau/bios: make jump conditionalIlia Mirkin
This fixes a hang in VBIOS scripts of the form "condition; jump". The jump used to always be executed, while now it will only be executed if the condition is true. See https://bugs.freedesktop.org/show_bug.cgi?id=72943 Reported-by: Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org
2014-01-07drm/nvce/mc: fix msi rearm on GF114Sid Boyce
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nvc0/gr: fix mthd data submissionKelly Doran
If the initial data element is 0, it will never be written, even though the value from the previous method may be there. Signed-off-by: Kelly Doran <kel.p.doran@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nouveau: populate master subdev pointer only when fully constructedBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfix from Ted Ts'o: "Fix a regression introduced in v3.13-rc6" * tag 'ext4_for_linus_stable' of http://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bigalloc regression
2014-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "I'm hoping this is the very last batch of networking fixes for 3.13, here goes nothing: 1) Fix crashes in VLAN's header_ops passthru. 2) Bridge multicast code needs to use BH spinlocks to prevent deadlocks with timers. From Curt Brune. 3) ipv6 tunnels lack proper synchornization when updating percpu statistics. From Li RongQing. 4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal Kalderon. 5) Avoid undefined operator evaluation order in llc code, from Daniel Borkmann. 6) Error paths in various GSO offload paths do not unwind properly, in particular they must undo any modifications they have made to the SKB. From Wei-Chun Chao. 7) Fix RX refill races during restore in virtio-net, from Jason Wang. 8) Fix SKB use after free in LLC code, from Daniel Borkmann. 9) Missing unlock and OOPS in netpoll code when VLAN tag handling fails. 10) Fix vxlan device attachment wrt ipv6, from Fan Du. 11) Don't allow creating infiniband links to non-infiniband devices, from Hangbin Liu. 12) Revert FEC phy reset active low change, it breaks things. From Fabio Estevam. 13) Fix header pointer handling in 6lowpan header building code, from Daniel Borkmann. 14) Fix RSS handling in be2net driver, from Vasundhara Volam. 15) Fix modem port indexing in HSO driver, from Dan Williams" * http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) bridge: use spin_lock_bh() in br_multicast_set_hash_max ipv6: don't install anycast address for /128 addresses on routers hso: fix handling of modem port SERIAL_STATE notifications isdn: Drop big endian cpp checks from telespci and hfc_pci drivers be2net: fix max_evt_qs calculation for BE3 in SR-IOV config be2net: increase the timeout value for loopback-test FW cmd be2net: disable RSS when number of RXQs is reduced to 1 via set-channels xen-netback: Include header for vmalloc net: 6lowpan: fix lowpan_header_create non-compression memcpy call fec: Revert "fec: Do not assume that PHY reset is active low" bnx2x: fix VLAN configuration for VFs. bnx2x: fix AFEX memory overflow bnx2x: Clean before update RSS arrives bnx2x: Correct number of MSI-X vectors for VFs bnx2x: limit number of interrupt vectors for 57711 qlcnic: Fix bug in Tx completion path infiniband: make sure the src net is infiniband when create new link {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly cxgb4: allow large buffer size to have page size netpoll: Fix missing TXQ unlock and and OOPS. ...
2014-01-06bridge: use spin_lock_bh() in br_multicast_set_hash_maxCurt Brune
br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06ipv6: don't install anycast address for /128 addresses on routersHannes Frederic Sowa
It does not make sense to create an anycast address for an /128-prefix. Suppress it. As 32019e651c6fce ("ipv6: Do not leave router anycast address for /127 prefixes.") shows we also may not leave them, because we could accidentally remove an anycast address the user has allocated or got added via another prefix. Cc: François-Xavier Le Bail <fx.lebail@yahoo.com> Cc: Thomas Haller <thaller@redhat.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06hso: fix handling of modem port SERIAL_STATE notificationsDan Williams
The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06isdn: Drop big endian cpp checks from telespci and hfc_pci driversGuenter Roeck
With arm:allmodconfig, building the Teles PCI driver fails with telespci.c:294:2: error: #error "not running on big endian machines now" Similar, building the driver for HFC PCI-Bus cards fails with hfc_pci.c:1647:2: error: #error "not running on big endian machines now" Remove the big endian cpp check from both drivers to fix the build errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06ext4: fix bigalloc regressionEric Whitney
Commit f5a44db5d2 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by: Eric Whitney <enwlinux@gmail.com>
2014-01-06Merge branch 'be2net'David S. Miller
Sathya Perla says: ==================== be2net: patch set Pls apply the following bug fixes to the 'net' tree. Thanks. Suresh Reddy (2): be2net: increase the timeout value for loopback-test FW cmd be2net: fix max_evt_qs calculation for BE3 in SR-IOV config Vasundhara Volam (1): be2net: disable RSS when number of RXQs is reduced to 1 via set-channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: fix max_evt_qs calculation for BE3 in SR-IOV configSuresh Reddy
The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF. When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: increase the timeout value for loopback-test FW cmdSuresh Reddy
The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: disable RSS when number of RXQs is reduced to 1 via set-channelsVasundhara Volam
When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"Alexander van Heukelum
My Acer 8510TZ stops displaying anything when X starts with Linus' current tree. I bisected it down to commit ee1452d74584. This patch reverts commit ee1452d74584. After the revert, everything works as before. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Reported-by: Dylan Borg <borgdylan@hotmail.com> (for a Acer Extensa 5635Z) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-06drm/i915/bdw: Flush system agent on gen8 alsoBen Widawsky
gem_gtt_cpu_tlb seems to indicate that it is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72869 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-05Merge tag 'samsung-clk-fixes' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-fixes Samsung Clock fixes for 3.13-rc7 * Several patches fixing up incorrectly defined register addresses and bitfield offsets that could lead to undefined operation when accessing respective registers or bitfields. 1) clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks 2a) clk: samsung: exynos5250: Fix ACP gate register offset 2b) clk: samsung: exynos5250: Add MDMA0 clocks 2c) ARM: dts: exynos5250: Fix MDMA0 clock number 3) clk: samsung: exynos4: Correct SRC_MFC register All three issues have been present since Exynos5250 and Exynos4 clock drivers were added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework") and e062b571777f5 ("clk: exynos4: register clocks using common clock framework") respectively. * Patch to fix automatic disabling of Exynos5250 sysreg clock that could cause undefined operation of several peripherals, such as USB, I2C, MIPI or display block. 4) clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock Present since Exynos5250 clock drivers was added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework"). * Patch fixing compilation warning in clk-exynos-audss driver when CONFIG_PM_SLEEP is disabled. 5) clk: exynos: File scope reg_save array should depend on PM_SLEEP Present since the driver was added by commit 1241ef94ccc3 ("clk: samsung: register audio subsystem clocks using common clock framework").
2014-01-05xen-netback: Include header for vmallocJosh Boyer
Commit ac3d5ac27735 ("xen-netback: fix guest-receive-side array sizes") added calls to vmalloc and vfree in the interface.c file without including <linux/vmalloc.h>. This causes build failures if the -Werror=implicit-function-declaration flag is passed. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05net: 6lowpan: fix lowpan_header_create non-compression memcpy callDaniel Borkmann
In function lowpan_header_create(), we invoke the following code construct: struct ipv6hdr *hdr; ... hdr = ipv6_hdr(skb); ... if (...) memcpy(hc06_ptr + 1, &hdr->flow_lbl[1], 2); else memcpy(hc06_ptr, &hdr, 4); Where the else path of the condition, that is, non-compression path, calls memcpy() with a pointer to struct ipv6hdr *hdr as source, thus two levels of indirection. This cannot be correct, and likely only one level of pointer was intended as source buffer for memcpy() here. Fixes: 44331fe2aa0d ("IEEE802.15.4: 6LoWPAN basic support") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05fec: Revert "fec: Do not assume that PHY reset is active low"Fabio Estevam
In order to keep DT compatibility we need to revert this, otherwise the original dts files will no longer work with this driver change. This reverts commit 7a399e3a2e05bc580a78ea72371b3896827f72e1. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05Merge branch 'bnx2x'David S. Miller
Yuval Mintz says: ==================== bnx2x: Bug fixes patch series Most of what this parch series contains is SR-IOV related bug fixes. Additionally, it contains some small fixes for legacy devices/modes. Please consider applying these patches to `net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: fix VLAN configuration for VFs.Yuval Mintz
If the hypervisor configures a vlan for the VF via the PF, the expected result is that only packets tagged by said vlan will be received by the VF (and that vlan will be silently removed). Due to an incorrect manipulation of vlan filters in the driver, the VF can receive untagged traffic even if the hypervisor configured some vlan for it. This patch corrects the behaviour. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: fix AFEX memory overflowYuval Mintz
There are 2 different (related) flows in the slowpath configuration that utilize the same pointer and cast it to different structs; This is obviously incorrect as the intended allocated memory is that of the smaller struct, possibly causing the flow utilizing the larger struct to corrupt other slowpath configuration. Since both flows are exclusive, set the allocated memory to be a union of both structs. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: Clean before update RSS arrivesMichal Kalderon
When a PF receives a VF message indicating a change in RSS properties it should clean the flags' bit-fields; Otherwise, it's possible that some random values will be considered as flags by the lower layers configuring the RSS in FW. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: Correct number of MSI-X vectors for VFsMichal Kalderon
Number of VFs in PCIe configuration space is zero-based. Driver incorrectly sets the number of VFs to be larger by one than what actually is feasible by HW, which might cause later VFs to fail to allocate their MSI-X interrupts. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-05bnx2x: limit number of interrupt vectors for 57711Dmitry Kravkov
Original straightforward division may lead to zeroing number of SB and null-pointer dereference when device is short of MSIX vectors or lacks MSIX capabilities. Reported-by: Vladislav Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another set of small fixes for ARM, covering various areas. Laura fixed a long standing issue with virt_addr_valid() failing to handle holes in memory. Steve found a problem with dcache flushing for compound pages. I fixed another bug in footbridge stuff causing time to tick slowly, and also a problem with the AES code which can cause linker errors. A patch from Rob which fixes Xen problems induced by a lack of consistency in our naming of ioremap_cache() - which thankfully has very few users" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7933/1: rename ioremap_cached to ioremap_cache ARM: fix "bad mode in ... handler" message for undefined instructions CRYPTO: Fix more AES build errors ARM: 7931/1: Correct virt_addr_valid ARM: 7923/1: mm: fix dcache flush logic for compound high pages ARM: fix footbridge clockevent device
2014-01-05ARM: 7933/1: rename ioremap_cached to ioremap_cacheRob Herring
ioremap_cache is more aligned with other architectures. There are only 2 users of this in the kernel: pxa2xx-flash and Xen. This fixes Xen build failures on arm64: drivers/tty/hvc/hvc_xen.c:233:2: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/grant-table.c:1174:3: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/xenbus/xenbus_probe.c:778:4: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-05ARM: fix "bad mode in ... handler" message for undefined instructionsRussell King
The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-05CRYPTO: Fix more AES build errorsRussell King
Building a multi-arch kernel results in: arch/arm/crypto/built-in.o: In function `aesbs_xts_decrypt': sha1_glue.c:(.text+0x15c8): undefined reference to `bsaes_xts_decrypt' arch/arm/crypto/built-in.o: In function `aesbs_xts_encrypt': sha1_glue.c:(.text+0x1664): undefined reference to `bsaes_xts_encrypt' arch/arm/crypto/built-in.o: In function `aesbs_ctr_encrypt': sha1_glue.c:(.text+0x184c): undefined reference to `bsaes_ctr32_encrypt_blocks' arch/arm/crypto/built-in.o: In function `aesbs_cbc_decrypt': sha1_glue.c:(.text+0x19b4): undefined reference to `bsaes_cbc_encrypt' This code is already runtime-conditional on NEON being supported, so there's no point compiling it out depending on the minimum build architecture. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc bugfixes from David Miller: 1) Missing include can lead to build failure, from Kirill Tkhai. 2) Use dev_is_pci() where applicable, from Yijing Wang. 3) Enable irqs after we enable preemption in cpu startup path, from Kirill Tkhai. 4) Revert a __copy_{to,from}_user_inatomic change that broke iov_iter_copy_from_user_atomic() and thus several tests in xfstests and LTP. From Dave Kleikamp. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: Revert "sparc64: Fix __copy_{to,from}_user_inatomic defines." sparc64: smp_callin: Enable irqs after preemption is disabled sparc/PCI: Use dev_is_pci() to identify PCI devices sparc64: Fix build regression
2014-01-04Revert "sparc64: Fix __copy_{to,from}_user_inatomic defines."Dave Kleikamp
This reverts commit 145e1c0023585e0e8f6df22316308ec61c5066b2. This commit broke the behavior of __copy_from_user_inatomic when it is only partially successful. Instead of returning the number of bytes not copied, it now returns 1. This translates to the wrong value being returned by iov_iter_copy_from_user_atomic. xfstests generic/246 and LTP writev01 both fail on btrfs and nfs because of this. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04sparc64: smp_callin: Enable irqs after preemption is disabledKirill Tkhai
Most of other architectures have below suggested order. So lets do the same to fit generic idle loop scheme better. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04sparc/PCI: Use dev_is_pci() to identify PCI devicesYijing Wang
Use dev_is_pci() instead of checking bus type directly. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04Linux 3.13-rc7v3.13-rc7Linus Torvalds
2014-01-03qlcnic: Fix bug in Tx completion pathShahed Shaikh
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-11 23:38:29 +0000