summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-05-16Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville
2014-05-15iwlwifi: fix LED support Kconfig dependenciesJohannes Berg
If DVM or MVM are built-in but LEDS_CLASS isn't then the current Kconfig will enable LED support and fail the build. Fix this by making the LED support depend on LEDS_CLASS being built-in or, if it is modular, only enabling it if iwlwifi also is. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: update nmi registerLiad Kaufman
In the 8000 HW family the register for forcing an NMI has changed, so this allows to still be able to force an NMI while taking into account the HW in order to write to the correct register. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: mvm: combine p2p and station mac context functionsLuciano Coelho
Instead of having two nearly identical functions to send the mac context commands, use a single way that can handle both the p2p and !p2p cases. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: mvm: BT Coex - send channel inhibition before associationEmmanuel Grumbach
The firmware needs to know on what channel we run before we set the association bit in the MAC context. Change a bit the flow to achieve this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: mvm: add uapsd_disable module parameterMatt Chen
Some APs (e.g. TP-LINK TL-WA801N) are disabling aggregation (downlink to station) when U-APSD is enabled, resulting in low throughput. Add a module parameter to allow disabling U-APSD support in the driver. Also re-enable U-APSD for -9 firmware since the firmare issues were fixed in this release. There are devices that won't support U-APSD even with newer firmware, so bring the TLV flag back to detect those. Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-14iwlwifi: allow dynamic configuration of internal memoryEran Harary
New transport need to configure internal memory based on the data in the (enlarged) alive notification from the firmware. Add a transport API for this. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13rsi: Changed the return value to enable BA set-upJahnavi Meher
Signed-off-by: Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: determine chanspec from struct cfg80211_chan_def infoArend van Spriel
The struct cfg80211_chan_def contains additional info to derive the bandwidth and side-band information of the chanspec. This patch adds chandef_to_chanspec() function used in IBSS join and starting AP operation. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: handle 80MHz chanspecs in construct_reg_info() functionArend van Spriel
The device is queried about the usability of channels, but it did not take 80MHz channels into consideration. This patch adds processing those chanspecs and clear the NO_80MHZ flag for those control/primary channels. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: get rid of brcmf_cfg80211_set_channel() functionArend van Spriel
The function does not provide any additional functionality and is used only once so just get rid of it. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: enable 80Mhz in 5G custom regulatory rulesArend van Spriel
By default allow 80Mhz in custom regulatory rules of the 5G band so the channels will not be flagged with N0_80MHZ. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: provide VHT capability information to user-spaceArend van Spriel
Although brcmfmac support several 11ac devices it did not advertise VHT related information to cfg80211. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcm80211: extend channel conversion functions for 80MHz supportArend van Spriel
The channel values used by firmware is handled using conversion functions depending on the type of chip. These functions were already in place but lacked proper support for 80MHz channel definitions. This patch adds the support for that. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: remove usage of cfg80211_get_chandef_type()Arend van Spriel
In the .start_ap callback cfg80211_get_chandef_type() was used to provide debug log info. However, this causes a warning when the chandef contains VHT channel with 80MHz bandwidth. Avoid the warning by just printing the channel and bandwidth instead. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: Fix reconnect failure after beacon timeoutDaniel Kim
The DISASSOC command needs to be sent to firmware when a connection loss is detected by firmware (e.g., beacon timeout). Otherwise the next connect request fails due to a lingering LINK(down) event from firmware. This patch resolves the issue by using brcmf_link_down() handler, instead of the incomplete duplicated codes. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: enhance nvram processingArend van Spriel
The driver serializes the nvram firmware file before sending it to the device. This patch enhances this to assure serialized data is properly formatted and provide warnings on syntax failures. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: Make FWS queueing configurable.Hante Meuleman
FWS is always queuing frames and using a worker for de-queueing, this is not always efficient for all bus layer. For example SDIO has an internal queue and worker making the queueing of FWS unnecessary. Make it possible to bypass the worker if fws mode is none using a bus interface configuration. For USB bus layer this configuration is set true to have fws provide queueing regardless the fws mode. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: Move handling 802.1x frames to dhd_linux.Hante Meuleman
Tracking and handling of 802.1x frames is done in two modules, it is more logical and clear to move this to dhd_linux module. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: Move out hdrpull from tx_finalize.Hante Meuleman
In tx_finalize the hdrpull is performed. For the new protocol msgbuf this is complex, because it does not use protocol headers in front of payload anymore and therefor can not determine interface index in the hdr pulll operation. Move out the hdrpull operation from tx_finalize to make msgbuf implementation easier. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: Report the support of firmware roamingDaniel Kim
Currently firmware roaming support is not reported to cfg80211. This patch reports the support of firmware based roaming when it is enabled. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13brcmfmac: Give priority to 5GHz band in selecting target BSSDaniel Kim
When a BSS provides both 2.4GHz and 5GHz bands, in many cases it makes sense to choose 5GHz. Typically a 5GHz channel is less crowded and has less interference and therefore its performance will be better than a crowded 2.4 GHz channel. This patch configures 'join_pref' to induce firmware to preferably select 5GHz BSS. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k_htc: use ath9k_cmn_debug_phy_errOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k: move phy_err to ath9k_cmn_debug_phy_errOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k_htc: use ath9k_cmn_debug_recvOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k: move recv to ath9k_cmn_debug_recvOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k & ath9k_htc: move ath_rx_stats to cmnOleksij Rempel
and use it. This move need changes in both drivers. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k: reorder or remove some includesOleksij Rempel
to fix compile errors Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k_htc: use ath9k_cmn_debug_base_eepromOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k: move base_eeprom debug code to ath9k_cmn_debug_base_eepromOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k_htc: use ath9k_cmn_debug_modal_eepromOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k-common: create common-debug and move modal_eeprom to cmnOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13b43: drop SSB dependencyRafał Miłecki
This adds choice submenu "Supported bus types" as two simple bool configs would allow user to compile b43 without any bus support (prety useless). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13b43: adjust code to compile without SSBRafał Miłecki
Users of new (BCMA based) wireless chipsets may not want to enable SSB. This is hopefully the last code patch for dropping SSB dependency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13orinoco_usb: Fix broken firmware load error checkingOndrej Zary
The check of ezusb_firmware_download() return value (added by commit 488ec878034eccb852267b0e27ce9d511f75c587) is broken because ezusb_firmware_download() returns 1 on success. This causes the driver not to work with the following error: orinoco_usb: probe of 3-3:1.0 failed with error -14 Check the return value only for negative values. This fix should be applied to -stable kernels too. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13ath9k: non-functional: calculate DFS pulse interval per-wiphyZefir Kurtisi
Systems with multiple DFS channel detectors need to track timestamp of previous pulse per instance to display the correct pulse interval. Since the interval value is used for debug printing only, this is a non-functional modification. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13amend "ath9k: Allow platform override without EEPROM override"Helmut Schaa
Originally Helmut posted a v2 of the "ath9k: Allow platform override without EEPROM override", but I had prematurely commited the original as commit 552a515707a. This commit restores the tree to what Helmut intended with his v2 submission. -- JWL Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rtlwifi: rtl8723be: add msi module parameterAdam Lee
The msi module parameter offers an option to enable or disable MSI interrupts mode, for debugging and workaround(in case) convenience. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rtlwifi: rtl8188ee: add msi module parameterAdam Lee
The msi module parameter offers an option to enable or disable MSI interrupts mode. For now, some users report RTL8188EE works only with MSI on their certain platforms, some others report it works only without MSI, this parameter will help. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rtlwifi: make MSI support a module parameterAdam Lee
This makes MSI support a module parameter, for debugging and workaround convenience. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: only call ieee80211_beacon_loss in managed modeGrazvydas Ignotas
ieee80211_beacon_loss() is only to be called in managed mode, but the firmware may send the sync timeout event at any time, so do a check before calling. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: fix mixed up args for joinGrazvydas Ignotas
The join arguments are mixed up, passing beacon_interval instead of channel and channel instead of beacon_interval. Fix them. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: fix null data for IBSSGrazvydas Ignotas
Fix the WARN below by not calling ieee80211_nullfunc_get() in IBSS mode, but setting up empty template the same way wl12xx driver does. WARNING: CPU: 0 PID: 914 at net/mac80211/tx.c:2750 ieee80211_nullfunc_get+0xc0/0xd0 [mac80211]() Modules linked in: wl1251_sdio wl1251 mac80211 cfg80211 ... [<c00439c0>] (warn_slowpath_null) [<bf0bdfdc>] (ieee80211_nullfunc_get [mac80211]) [<bf134774>] (wl1251_op_bss_info_changed [wl1251]) [<bf099e14>] (ieee80211_bss_info_change_notify [mac80211]) ... Also perform join command regardless of bss_type as that seems to be required for proper operation. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Revert "wl1251: enforce changed hw encryption support on monitor state change"Grazvydas Ignotas
This reverts commit b90a1165a72fabdc260abaa9eeadcbfd29e267eb. That commit (or rather, hack) triggers a scary WARN in IBSS (ad-hoc) mode. Steps to reproduce: ifconfig wlan0 down iwconfig wlan0 mode ad-hoc ifconfig wlan0 up ------------[ cut here ]------------ WARNING: CPU: 0 PID: 905 at kernel/workqueue.c:1400 __queue_work+0x21c/0x2f4() Modules linked in: wl1251_sdio wl1251 mac80211 cfg80211 CPU: 0 PID: 905 Comm: ifconfig Not tainted 3.15.0-rc2#233 [<c0015f38>] (unwind_backtrace) from [<c0012938>] [<c0012938>] (show_stack) from [<c05d4034>] [<c05d4034>] (dump_stack) from [<c0043984>] [<c0043984>] (warn_slowpath_common) from [<c00439c0>] [<c00439c0>] (warn_slowpath_null) from [<c005b6c8>] [<c005b6c8>] (__queue_work) from [<c005b820>] [<c005b820>] (queue_work_on) from [<bf134ac0>] [<bf134ac0>] (wl1251_op_config [wl1251]) [<bf099a70>] (ieee80211_hw_config [mac80211]) ... This happens because ieee80211_connection_loss() is not expected to be called in IBSS mode (mac80211 ends up queuing uninitialized work in that case). Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-13Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-13iwlwifi: mvm: enable RX chain diversity if neededJohannes Berg
In some situations (see comment) it makes sense to enable both chains (if available) to get better throughput by having chain diversity available. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: prevent sched scan while not idleDavid Spinadel
Prevent sched scan while not idle (including during association or in AP mode) instead of while associated only. This fixes my previous commit which was incomplete: commit bd5e4744a6ca64299b57a2682c720d00a475a734 Author: David Spinadel <david.spinadel@intel.com> Date: Thu Apr 24 13:15:29 2014 +0300 iwlwifi: mvm: do no sched scan while associated Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: fix off-by-one in scan channels configurationEliad Peller
tail should be equal to the last valid index, so decrease it by one. This error causes in "a gap" in some cases (as well as some possible out-of-bound write), finally resulting in ucode assertion. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 11:44:36 +0000