summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-02-02powerpc/usb: fix issue of CPU halt when missing USB PHY clockShengzhou Liu
when missing USB PHY clock, kernel booting up will halt during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hang in this case. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02usb: otg: mv_otg: Add dependenceNeil Zhang
This otg driver depends on marvell EHCI driver, so add the dependence. It can fix the following build error on i386: ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02usb: host: Distinguish Kconfig text for Freescale controllersFabio Estevam
Distinguish Kconfig text by providing the Freescale family name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02caif: Bugfix double kfree_skb upon xmit failureDmitry Tarnyagin
SKB is freed twice upon send error. The Network stack consumes SKB even when it returns error code. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02caif: Bugfix list_del_rcu race in cfmuxl_ctrlcmd.sjur.brandeland@stericsson.com
Always use cfmuxl_remove_uplayer when removing a up-layer. cfmuxl_ctrlcmd() can be called independently and in parallel with cfmuxl_remove_uplayer(). The race between them could cause list_del_rcu to be called on a node which has been already taken out from the list. That lead to a (rare) crash on accessing poisoned node->prev inside list_del_rcu. This fix ensures that deletion are done holding the same lock. Reported-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02net/hyperv: Fix the page buffer when an RNDIS message goes beyond page boundaryHaiyang Zhang
There is a possible data corruption if an RNDIS message goes beyond page boundary in the sending code path. This patch fixes the problem. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02net/hyperv: Use netif_tx_disable() instead of netif_stop_queue() when necessaryHaiyang Zhang
For code path not on the xmit, use netif_tx_disable() instead of netif_stop_queue() to ensure other CPUs are not doing xmit. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02drivers/net/ethernet/ti: Move call to PTR_ERR after reassignmentJulia Lawall
PTR_ERR should be called before its argument is cleared. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; constant c; @@ *e = c ... when != e = e1 when != &e when != true IS_ERR(e) *PTR_ERR(e) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reported-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02net/hyperv: fix the issue that large packets be dropped under bridgeWei Yongjun
The packets with size larger than 1452 will be dropped by bridge which with two hyperv netdevice ports. This cause by hyperv netvsc driver always copy the trailer padding to the data packet, and then the skb received from netdevice may include wrong skb->len (20 bytes larger than the real size normally). The captured packet may like this: Ethernet II, Src: Microsof_00:00:07 (00:15:5d:00:00:07), Dst: HewlettP_00:00:4e (00:1f:29:00:00:4e) Destination: HewlettP_e6:00:4e (00:1f:29:00:00:4e) Source: Microsof_f6:6d:07 (00:15:5d:f6:6d:07) Type: IP (0x0800) Trailer: 1415161718191A1B1C1D1E1F20212223 Frame check sequence: 0x24252627 [incorrect, should be 0x7c2e5a5e] The following command help to reproduction it, and the ping ICMP packets will be dropped by bridge. $ ping ip -s 1453 This patch fixed it by removing the trailer padding from the data packet. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02tcp: properly initialize tcp memory limitsJason Wang
Commit 4acb4190 tries to fix the using uninitialized value introduced by commit 3dc43e3, but it would make the per-socket memory limits too small. This patch fixes this and also remove the redundant codes introduced in 4acb4190. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Glauber Costa <glommer@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/blit: fix blit copy for very large buffers drm/radeon/kms: fix TRAVIS panel setup drm/radeon: fix use after free in ATRM bios reading code. drm/radeon/kms: Fix device tree linkage of DP i2c buses too drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height. drm/radeon/kms: disable output polling when suspended drm/nv50/pm: signedness bug in nv50_pm_clocks_pre() drm/nouveau/gem: fix fence_sync race / oops drm/nouveau: fix typo on mxmdcb option drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS drm/nouveau/disp: check that panel power gpio is enabled at init time
2012-02-02Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: Revert "microblaze: Add topology init"
2012-02-02Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', ↵Linus Torvalds
'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bugs, x86: Fix printk levels for panic, softlockups and stack dumps * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix number of samples displayed perf tools: Fix strlen() bug in perf_event__synthesize_event_type() perf tools: Fix broken build by defining _GNU_SOURCE in Makefile x86/dumpstack: Remove unneeded check in dump_trace() perf: Fix broken interrupt rate throttling * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW sched: Fix ancient race in do_exit() sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug sched/s390: Fix compile error in sched/core.c sched: Fix rq->nr_uninterruptible update race * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Remove VersaLogic Menlow reboot quirk x86/reboot: Skip DMI checks if reboot set by user x86: Properly parenthesize cmpxchg() macro arguments
2012-02-02driver core: cpu: remove kernel warning when removing a cpuGreg Kroah-Hartman
With the movement of the cpu sysdev code to be real stuct devices, now when we remove a cpu from the system, the driver core rightfully complains that there is not a release method for this device. For now, paper over this issue by quieting the driver core, but comment this in detail. This will be resolved in future kernels to be solved properly. Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02ARM: 7302/1: Add TLB flushing for both entries in a PMDCatalin Marinas
Linux uses two PMD entries for a PTE with the classic page table format, covering 2MB range. However, the __pte_free_tlb() function only adds a single TLB flush corresponding to 1MB range covering 'addr'. On Cortex-A15, level 1 entries can be cached by the TLB independently of the level 2 entries and without additional flushing a PMD entry would be left pointing at the wrong PTE. The patch limits the TLB flushing range to two 4KB pages around the 1MB boundary within PMD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15Will Deacon
Commit 89d6c0b5 ("perf, arch: Add generic NODE cache events") added empty NODE event definitions for the ARM PMU implementations. This was merged along with Cortex-A5 and Cortex-A15 PMU support, so they missed out on the original patch. This patch adds the empty definitions to Cortex-A5 and Cortex-A15. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registersWill Deacon
If we are context switched whilst copying into a thread's vfp_hard_struct then the partial copy may be corrupted by the VFP context switching code (see "ARM: vfp: flush thread hwstate before restoring context from sigframe"). This patch updates the ptrace VFP set code so that the thread state is flushed before the copy, therefore disabling VFP and preventing corruption from occurring. Cc: stable <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7307/1: vfp: fix ptrace regset modification raceDave Martin
In a preemptible kernel, vfp_set() can be preempted, causing the hardware VFP context to be switched while the thread vfp state is being read and modified. This leads to a race condition which can cause the thread vfp state to become corrupted if lazy VFP context save occurs due to preemption in between the time thread->vfpstate is read and the time the modified state is written back. This may occur if preemption occurs during the execution of a ptrace() call which modifies the VFP register state of a thread. Such instances should be very rare in most realistic scenarios -- none has been reported, so far as I am aware. Only uniprocessor systems should be affected, since VFP context save is not currently lazy in SMP kernels. The problem was introduced by my earlier patch migrating to use regsets to implement ptrace. This patch does a vfp_sync_hwstate() before reading thread->vfpstate, to make sure that the thread's VFP state is not live in the hardware registers while the registers are modified. Thanks to Will Deacon for spotting this. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon
Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Cc: stable <stable@vger.kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"Russell King
This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3. Joachim Eastwood reports: | "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping" | Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master | | Breaks booting on my custom AT91RM9200 board. | There isn't any error messages or anything that indicates what goes | wrong it just stops after; Uncompressing Linux... done, booting the | kernel. | | Reverting it makes my board boot again. and further debugging reveals: ioremap: pfn=fffff phys=fffff000 offset=400 size=1000 ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000 ioremap: found: addr fef74000 => fed73000 => fed73400 Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn 0xfffff. This happens because the changed if statement becomes: if (0x00200 > 0xfffff || 0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1) and therefore: if (0x00200 > 0xfffff || 0x000003ff > 0x00203fff) The if condition fails, and so we _believe_ that the SRAM mapping fits our request. Clearly that's totally bogus. Moreover, the original premise of the 'fix' patch was wrong: | The condition checking boundaries of the requested and existing | mappings didn't take in-page offset into consideration though, | which lead to obscure and hard to debug problems when requested | mapping crossed end of the static one. as the code immediately above this loop does: size = PAGE_ALIGN(offset + size); so 'size' already contains the requested offset into the page. So, revert the broken 'fix'. Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-02drm/radeon/kms/blit: fix blit copy for very large buffersIlija Hadzic
Evergreen and NI blit copy was broken if the buffer maps to a rectangle whose one dimension is 16384 (max dimension allowed by these chips). In the mainline kernel, the problem is exposed only when buffers are very large (1G), but it's still a problem. The problem could be exposed for smaller buffers if anyone modifies the algorithm for rectangle construction in r600_blit_create_rect() (the reason why someone would modify that algorithm is to tune the performance of buffer moves). The root cause was in i2f() function which only operated on range between 0 and 16383. Fix this by extending the range of i2f() function to 0 to 32767. While at it improve the function so that the range can be easily extended in the future (if it becomes necessary), cleanup lines over 80 characters, and replace in-line comments with one strategic comment that explains the crux of the function. Credits to michel@daenzer.net for pointing out the root cause of the bug. v2: Fix I2F_MAX_INPUT constant definition goof and warn only once if input argument is out of range. Edit the comment a little bit to avoid some linguistic confusion and make it look better in general. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02drm/radeon/kms: fix TRAVIS panel setupAlex Deucher
Different versions of the DP to LVDS bridge chip need different panel mode settings depending on the chip version used. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41569 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02drm/radeon: fix use after free in ATRM bios reading code.Dave Airlie
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45503 Reported-and-Debugged-by: mlambda@gmail.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-02HID: hyperv: Properly disconnect the input deviceK. Y. Srinivasan
When we unload the mouse driver, properly disconnect the input device. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reported-by: Fuzhou Chen <fuzhouch@microsoft.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-02ALSA: hda - Disable dynamic-power control for VIA as defaultTakashi Iwai
Since the dynamic pin power-control and the analog low-current mode may lead to pop-noise, it's safer to set it off as default. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Allow analog low-current mode when dynamic power-control is onTakashi Iwai
VIA codecs have several different power-saving features, and one of them is the analog low-current mode. But it turned out that the ALC mode causes pop-noises at each on/off time on some machines. As a quick workaround, disable the ALC when another power-saving feature, the dynamic pin power-control, is turned off, too, since the dynamic power-control is already exposed as a mixer enum element so that user can turn it on/off freely. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Fix the logic to detect VIA analog low-current modeTakashi Iwai
The analog low-current mode must be enabled when the no stream is running but the current detection checks it in a wrong way. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Check power-state before changing in patch_via.cTakashi Iwai
Instead of always writing AC_VERB_SET_POWER_STATE, check the current power-state and don't write again if the value is already set. This may reduce the click noise upon the dynamic power-state change (e.g. in analog-input mixer). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02HID: usbhid: fix dead lock between open and disconectMing Lei
There is no reason to hold hiddev->existancelock before calling usb_deregister_dev, so move it out of the lock. The patch fixes the lockdep warning below. [ 5733.386271] ====================================================== [ 5733.386274] [ INFO: possible circular locking dependency detected ] [ 5733.386278] 3.2.0-custom-next-20120111+ #1 Not tainted [ 5733.386281] ------------------------------------------------------- [ 5733.386284] khubd/186 is trying to acquire lock: [ 5733.386288] (minor_rwsem){++++.+}, at: [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386311] [ 5733.386312] but task is already holding lock: [ 5733.386315] (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid] [ 5733.386328] [ 5733.386329] which lock already depends on the new lock. [ 5733.386330] [ 5733.386333] [ 5733.386334] the existing dependency chain (in reverse order) is: [ 5733.386336] [ 5733.386337] -> #1 (&hiddev->existancelock){+.+...}: [ 5733.386346] [<ffffffff81082d26>] lock_acquire+0xcb/0x10e [ 5733.386357] [<ffffffff813df961>] __mutex_lock_common+0x60/0x465 [ 5733.386366] [<ffffffff813dfe4d>] mutex_lock_nested+0x36/0x3b [ 5733.386371] [<ffffffffa0094ad6>] hiddev_open+0x113/0x193 [usbhid] [ 5733.386378] [<ffffffffa0011971>] usb_open+0x66/0xc2 [usbcore] [ 5733.386390] [<ffffffff8111a8b5>] chrdev_open+0x12b/0x154 [ 5733.386402] [<ffffffff811159a8>] __dentry_open.isra.16+0x20b/0x355 [ 5733.386408] [<ffffffff811165dc>] nameidata_to_filp+0x43/0x4a [ 5733.386413] [<ffffffff81122ed5>] do_last+0x536/0x570 [ 5733.386419] [<ffffffff8112300b>] path_openat+0xce/0x301 [ 5733.386423] [<ffffffff81123327>] do_filp_open+0x33/0x81 [ 5733.386427] [<ffffffff8111664d>] do_sys_open+0x6a/0xfc [ 5733.386431] [<ffffffff811166fb>] sys_open+0x1c/0x1e [ 5733.386434] [<ffffffff813e7c79>] system_call_fastpath+0x16/0x1b [ 5733.386441] [ 5733.386441] -> #0 (minor_rwsem){++++.+}: [ 5733.386448] [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74 [ 5733.386454] [<ffffffff81082d26>] lock_acquire+0xcb/0x10e [ 5733.386458] [<ffffffff813e01f5>] down_write+0x44/0x77 [ 5733.386464] [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386475] [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid] [ 5733.386483] [<ffffffff8132df51>] hid_disconnect+0x3f/0x54 [ 5733.386491] [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a [ 5733.386496] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386502] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386507] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386512] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386519] [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d [ 5733.386525] [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid] [ 5733.386530] [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore] [ 5733.386542] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386547] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386552] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386557] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386562] [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore] [ 5733.386573] [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore] [ 5733.386583] [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore] [ 5733.386593] [<ffffffff8105dc0f>] kthread+0x95/0x9d [ 5733.386601] [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10 [ 5733.386607] [ 5733.386608] other info that might help us debug this: [ 5733.386609] [ 5733.386612] Possible unsafe locking scenario: [ 5733.386613] [ 5733.386615] CPU0 CPU1 [ 5733.386618] ---- ---- [ 5733.386620] lock(&hiddev->existancelock); [ 5733.386625] lock(minor_rwsem); [ 5733.386630] lock(&hiddev->existancelock); [ 5733.386635] lock(minor_rwsem); [ 5733.386639] [ 5733.386640] *** DEADLOCK *** [ 5733.386641] [ 5733.386644] 6 locks held by khubd/186: [ 5733.386646] #0: (&__lockdep_no_validate__){......}, at: [<ffffffffa00084af>] hub_thread+0x14a/0x1157 [usbcore] [ 5733.386661] #1: (&__lockdep_no_validate__){......}, at: [<ffffffffa0006b77>] usb_disconnect+0x50/0x11f [usbcore] [ 5733.386677] #2: (hcd->bandwidth_mutex){+.+.+.}, at: [<ffffffffa0006bc8>] usb_disconnect+0xa1/0x11f [usbcore] [ 5733.386693] #3: (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d [ 5733.386704] #4: (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d [ 5733.386714] #5: (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid] [ 5733.386727] [ 5733.386727] stack backtrace: [ 5733.386731] Pid: 186, comm: khubd Not tainted 3.2.0-custom-next-20120111+ #1 [ 5733.386734] Call Trace: [ 5733.386741] [<ffffffff81062881>] ? up+0x34/0x3b [ 5733.386747] [<ffffffff813d9ef3>] print_circular_bug+0x1f8/0x209 [ 5733.386752] [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74 [ 5733.386756] [<ffffffff810808b4>] ? trace_hardirqs_on_caller+0x15d/0x1a3 [ 5733.386763] [<ffffffff81043a3f>] ? vprintk+0x3f4/0x419 [ 5733.386774] [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386779] [<ffffffff81082d26>] lock_acquire+0xcb/0x10e [ 5733.386789] [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386797] [<ffffffff813e01f5>] down_write+0x44/0x77 [ 5733.386807] [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386818] [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386825] [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid] [ 5733.386830] [<ffffffff8132df51>] hid_disconnect+0x3f/0x54 [ 5733.386834] [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a [ 5733.386839] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386844] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386848] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386854] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386859] [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d [ 5733.386865] [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid] [ 5733.386876] [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore] [ 5733.386882] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386886] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386890] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386895] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386905] [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore] [ 5733.386916] [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore] [ 5733.386921] [<ffffffff813dff82>] ? __mutex_unlock_slowpath+0x130/0x141 [ 5733.386929] [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore] [ 5733.386935] [<ffffffff8106a51d>] ? finish_task_switch+0x78/0x150 [ 5733.386941] [<ffffffff8105e396>] ? __init_waitqueue_head+0x4c/0x4c [ 5733.386950] [<ffffffffa0008365>] ? usb_remote_wakeup+0x56/0x56 [usbcore] [ 5733.386955] [<ffffffff8105dc0f>] kthread+0x95/0x9d [ 5733.386961] [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10 [ 5733.386966] [<ffffffff813e24b8>] ? retint_restore_args+0x13/0x13 [ 5733.386970] [<ffffffff8105db7a>] ? __init_kthread_worker+0x55/0x55 [ 5733.386974] [<ffffffff813e90b0>] ? gs_change+0x13/0x13 Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-02i.MX SDMA: Fix burstsize settingsPhilippe Rétornaz
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01gpio: Add missing spin_lock_init in gpio-ml-ioh driverAxel Lin
This bug was introduced by commit 54be5663 "gpio-ml-ioh: Support interrupt function" which adds a spinlock to struct ioh_gpio but never init the spinlock. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-01gpio: Add missing spin_lock_init in gpio-pch driverAxel Lin
This bug was introduced by commit d568a681 "gpio-pch: add spinlock in suspend/resume processing" which adds a spinlock to struct pch_gpio but never init the spinlock. Reported-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-01Merge tag 'firewire-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 firewire fixes post v3.3-rc1 Add workarounds table entries for hardware bugs in - FireWire part of Sound Blaster Audigy cards, - Ricoh PCIe 1394 controllers. Without these, several protocols, e.g. AV/C, do not work on the Audigy, and the Ricoh PCIe controllers wouldn't work at all. This does not concern the older Ricoh PCI controllers. * tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: disable MSI on Ricoh controllers firewire: ohci: add reset packet quirk for SB Audigy
2012-02-01staging: fix go7007-usb licenseRandy Dunlap
Add MODULE_LICENSE() as per the license in the comment at the top of the file for this source module to fix build warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o see include/linux/module.h for more information Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Ross Cohen <rcohen@snurgle.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01docbook: fix fatal errors in device-drivers docbook and add DMA Management ↵Randy Dunlap
section Fix 2 fatal errors in the device-drivers docbook. Also add some missing files from drivers/base/; since several of these are DMA-related, add a section for DMA Management. docproc: drivers/base/sys.c: No such file or directory docproc: drivers/tty/serial/8250.c: No such file or directory Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01USB: add new zte 3g-dongle's pid to option.cRui li
As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-01gpio: samsung: adapt to changes in gpio specifier translator function ↵Thomas Abraham
declaration Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle parsing data) modifies the parameter list of of_xlate function pointer declaration in gpio_chip. Adapt the gpio specifier translate function for this change. Reported-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Tested-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-01Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h lib: Fix multiple definitions of clz_tab lib/digsig: checks for NULL return value lib/mpi: added missing NULL check lib/mpi: added comment on divide by 0 case lib/mpi: check for possible zero length lib/digsig: pkcs_1_v1_5_decode_emsa cleanup lib/digsig: additional sanity checks against badly formated key payload lib/mpi: removed unused functions lib/mpi: checks for zero divisor length lib/mpi: return error code on dividing by zero lib/mpi: replaced MPI_NULL with normal NULL lib/mpi: added missing NULL check
2012-02-01usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()Kuninori Morimoto
The usb/ch9.h will be installed to /usr/include/linux, and be used from user space. But le16_to_cpu() is only defined for kernel code. Without this patch, user space compile will be broken. Special thanks to Stefan Becker Reported-by: Stefan Becker <chemobejk@gmail.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-01USB: qcserial: don't enable autosuspendThomas Tuttle
We've found that qcserial devices will not always wake up reliably from autosuspend, so disable it. Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-01USB: qcserial: add several new serial devicesThomas Tuttle
Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-02-01ASoC: wm_hubs: Correct line input to line output 2 pathsMark Brown
The second line output mixer has the controls for the line input bypasses in the opposite order. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-02lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.hDavid Miller
This copy of longlong.h is extremely dated and results in compile errors on sparc32 when MPILIB is enabled, copy over the more uptodate implementation from arch/sparc/math/sfp-util_32.h Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02lib: Fix multiple definitions of clz_tabDavid Miller
Both sparc 32-bit's software divide assembler and MPILIB provide clz_tab[] with identical contents. Break it out into a seperate object file and select it when SPARC32 or MPILIB is set. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-01Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband InfiniBand/RDMA fixes for 3.3: - Fix a crash due to a regression (uninitialized refcnt) introduced in 3.2 with XRC support. - Close race in how ucma reports events when connect fails. - Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works. - Fix regression in qib caused by over-aggressive PCIe tuning. - Other small fixes for hardware drivers (ipath, nes, qib). * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Copyright update IB/mlx4: pass SMP vendor-specific attribute MADs to firmware RDMA/nes: Fix fast memory registration opcode RDMA/nes: Fix fast memory registration length RDMA/ucma: Discard all events for new connections until accepted IB/qib: Roll back PCIe tuning change IB/qib: Use GFP_ATOMIC when locks are held RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh() RDMA/nes: Fix for sending MPA reject frame IB/ipath: Calling PTR_ERR() on right variable in create_file() RDMA/core: Fix kernel panic by always initializing qp->usecnt
2012-02-01proc: make sure mem_open() doesn't pin the target's memoryOleg Nesterov
Once /proc/pid/mem is opened, the memory can't be released until mem_release() even if its owner exits. Change mem_open() to do atomic_inc(mm_count) + mmput(), this only pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count) before access_remote_vm(), this verifies that this mm is still alive. I am not sure what should mem_rw() return if atomic_inc_not_zero() fails. With this patch it returns zero to match the "mm == NULL" case, may be it should return -EINVAL like it did before e268337d. Perhaps it makes sense to add the additional fatal_signal_pending() check into the main loop, to ensure we do not hold this memory if the target task was oom-killed. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01proc: unify mem_read() and mem_write()Oleg Nesterov
No functional changes, cleanup and preparation. mem_read() and mem_write() are very similar. Move this code into the new common helper, mem_rw(), which takes the additional "int write" argument. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01proc: mem_release() should check mm != NULLOleg Nesterov
mem_release() can hit mm == NULL, add the necessary check. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-01PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl pathSrivatsa S. Bhat
In the SNAPSHOT_CREATE_IMAGE ioctl, if the call to hibernation_snapshot() fails, the frozen tasks are not thawed. And in the case of success, if we happen to exit due to a successful freezer test, all tasks (including those of userspace) are thawed, whereas actually we should have thawed only the kernel threads at that point. Fix both these issues. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@vger.kernel.org
2012-02-01mac80211: timeout a single frame in the rx reorder bufferEliad Peller
The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: <stable@vger.kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>