summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-09-07Merge intel drm-intel-next branchDave Airlie
Merge remote branch 'anholt/drm-intel-next' of ../anholt-2.6 into drm-next Conflicts: drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_sdvo.c
2009-09-07drm/kms: remove old std mode fallback code.Dave Airlie
The new code adds modes in the helper, which makes more sense I disliked the non-driver code adding modes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms/i915: Add the default mode for CRT output without EDIDykzhao
Add the default mode for every output device when there is no mode for it. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms: add a function that can add the mode for the output device without EDIDZhao Yakui
Add a function that can be used to add the default mode for the output device without EDID. It will add the default mode that meets with the requirements of given hdisplay/vdisplay limit. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms: try to find the std mode in DMT tableZhao Yakui
When we need to add the standard timing mode, we will firstly check whether it can be found in DMT table by comparing the hdisplay/vdisplay/vfresh_rate. If it can't be found, then we will use the cvt/gtf to add the required mode. If it can be found, it will be returned. At the same time the function of drm_mode_vrefresh is also fixed. It will return the result of actual refresh_rate plus 0.5. For example: When the calculated value is 84.9, then the fresh_rate is 85. When the calculated value is 70.02, then the fresh_rate is 70. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/kms: Add the default mode tableZhao Yakui
When we add a standard timing mode in UMS, we will first check whether it can be found in default mode table. If it can't be found, then we will use cvt/gtf to add the standard timing mode. Add the default mode table so that we can check whether the given mode can be found in the default mode table as what we have done in UMS mode. If the status of one output device is connected but there is no EDID, it will have no correct mode. In such case we can add some default modes for it. Of course we only add the modes in the default modes list that visible part is not greater than 1024x768. The default mode is autogenerated from the DMT spec. And it is copied from xserver/hw/xfree86/modes/xf86EdidModes.c. But the mode with reduced blank feature is removed. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm: split crtc/fb helpers into a separate moduleDave Airlie
I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/radeon/kms: add updated registers from drm-fixes.Dave Airlie
Fixes up the DISCARD + 2 sided stencil in the new generator scripts. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07drm/radeon/kms: block depthxy offset from use from userspace.Dave Airlie
This could be used to bypass CS checks. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-06drm/i915: Put the idle reclocking work on our private workqueue as well.Eric Anholt
Fixes (again) whole-system lockups due to GPU lockups. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-06drm/i915: Pad ringbuffer with NOOPs before wrappingChris Wilson
According to the docs, the ringbuffer is not allowed to wrap in the middle of an instruction. G45 PRM, Vol 1b, p101: While the “free space” wrap may allow commands to be wrapped around the end of the Ring Buffer, the wrap should only occur between commands. Padding (with NOP) may be required to follow this restriction. Do as commanded. [Having seen bug reports where there is evidence of split commands, but apparently the GPU has continued on merrily before a bizarre and untimely death, this may or may not fix a few random hangs.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> CC: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: do dynamic clock freq control only in kernel modesettingZhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/I915: Use the CRT DDC to get the EDID for DVI-connector on MacKeith Packard
mac Mini's have a single DDC line on the DVI connector, shared between the analog link and the digital link. So, if DDC isn't detected on GPIOE (the usual SDVO DDC link), try GPIOA (the usual VGA DDC link) when there isn't a VGA monitor connected. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: fix tiling on IGDNGZhenyu Wang
It seems that on IGDNG the same swizzling setup always applys. And front buffer tiling needs to set address swizzle in display arb control too. Fix plane tricle feed setting in v1 which should be disable bit, and always setup address swizzle to let hardware care for buffer tiling in all cases. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: modeset: always set intel_crtc->dpms_mode by moving the assignment up.Daniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: remove open-coded drm_mode_object_findDaniel Vetter
And clean up a small whitespace goof-up in the same function, while I was looking at it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: Make the downclocking debug code be under DRM_DEBUG not DRM_ERROR.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-04drm/i915: i915_modeset is signedKyle McMartin
Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: add dynamic clock frequency controlJesse Barnes
There are several sources of unnecessary power consumption on Intel graphics systems. The first is the LVDS clock. TFTs don't suffer from persistence issues like CRTs, and so we can reduce the LVDS refresh rate when the screen is idle. It will be automatically upclocked when userspace triggers graphical activity. Beyond that, we can enable memory self refresh. This allows the memory to go into a lower power state when the graphics are idle. Finally, we can drop some clocks on the gpu itself. All of these things can be reenabled between frames when GPU activity is triggered, and so there should be no user visible graphical changes. Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: Support IGD EOSShaohua Li
In the event that any one of the DAC analog outputs (R,G,B) were driven at full-scale (white video) or some analog level close to full-scale voltage, and if the video cable were then disconnected, the analog video voltage level would exceed the maximum electrical overstress limit of the native (thin-oxide) transistors thus causing a long-term reliability concern. The electrical overstress condition occurs in this particular case. This patch address the IGD EOS (electrical overstress condition) issue. When the EOS interrupt occurs, OS should disable DAC and then disable EOS, then the normal hotplug operation follows. TODO: it appears the normal unplug interrupt is missed as reported by Li Peng, need more checks here. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: Enable PAL and SECAM format and add the propery for SDVO-TVZhao Yakui
Currently SDVO TV only support NTSC-M format. In this patch we introduce PAL and SECAM formats available and create seting-format property at init time. When user dynamically chose preferred format by xrandr command, it will refine all modelines provided by SDVO device, then instruct SDVO device to execute. At the same time the property is added for SDVO-TV so that the SDVO-TV mode can be changed by using xrandr. https://bugs.freedesktop.org/show_bug.cgi?id=22891 Signed-off-by: Ma Ling <ling.ma@intel.com> review-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: select TV format according to connector typeMa Ling
For integrated TV there are 3 connector types: S-VIDEO, Composite and Component(YprPb). Those tv formats whose component flag is true should be assigned to Component connector, others are for S-VIDEO and Composite. The patch intends to find appropriate tv format for each connector. In such case it will return the correct modeline to user space. Otherwise it will return the incorrect modeline when S-video/composite is connected. Signed-off-by: Ma Ling <ling.ma@intel.com> reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: update debugfs interrupt info on IGDNGZhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: Add i915 register dumping debugfs fileBen Gamari
Add a debugfs file to dump the entire register range. Here we assume that reading write-only/reserved registers won't make the chip angry. Seems to hold true, thankfully. Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-04drm/i915: Move i915_gem_debugfs.c to i915_debugfs.cBen Gamari
Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> [anholt: hand-applied for conflicts] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02agp/intel: support for new chip variant of IGDNG mobileZhenyu Wang
New variant of IGDNG mobile chip has new host bridge id. [anholt: Note that this new PCI ID doesn't impact the DRM, which doesn't care about the PCI ID of the bridge] Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02drm/i915: Unref old_obj on get_fence_reg() error pathChris Wilson
Remember to release the local reference if we fail to wait on the rendering. (Also whilst in the vicinity add some whitespace so that the phasing of the operations is clearer.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02drm/i915: increase default latency constant (v2 w/comment)Jesse Barnes
Some i915/i945 platforms have a fairly high memory latency in certain situations, so increase our constant a bit to avoid FIFO underruns. The effect should be positive on other platforms as well; we'll have a bit more insurance against a busy memory subsystem due to the extra FIFO entries. Fixes fdo bug #23368. Needed for 2.6.31. Tested-by: Sven Arvidsson <sa@whiz.se> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02drm/crtc_helper: avoid NULL-pointer dereference when encoder is NULLMaarten Maathuis
Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-09-02drm/crtc: fix mismerge of last patch.Dave Airlie
We only want to NULL encoder->crtc when it is off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/kms: add explicit encoder disable function and detach harder.Dave Airlie
For shared tv-out and VGA encoders, we really need to know if the encoder is just being switched off temporarily in blanking or if we are really disabling it hard. Also we need to try harder to disconnect encoders from unused connectors so we can share more efficently. (shared encoders stuff is coming in radeon tv-out support) Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm: fix drm_cache.c for arch with no support.Dave Airlie
This produces a warn on for architectures where this gets called but we don't have a cache flushing implementation suitable. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/mm: add ability to dump mm lists via debugfsDave Airlie
This adds code to the drm_mm to talk to debugfs, and adds support to radeon to add the VRAM and GTT mm lists to debugfs. I tested with spinlock debugging and it doesn't give out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31autofs4 - fix missed case when changing to use struct pathIan Kent
In the recent change by Al Viro that changes verious subsystems to use "struct path" one case was missed in the autofs4 module which causes mounts to no longer expire. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889A ALSA: hda - Add missing mux check for VT1708
2009-08-31Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors. V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true V4L/DVB (12457): zr364: wrong indexes V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces V4L/DVB (12450): Siano: Fixed SDIO compilation bugs V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices
2009-08-31lmb: Also remove __init from lmb_end_of_RAM() declaration in lmb.hBenjamin Herrenschmidt
My previous patch (commit 4f8ee2c9cc: "lmb: Remove __init from lmb_end_of_DRAM()") removed __init in lmb.c but missed the fact that it was also marked as such in the .h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31ata_piix: parallel scanning on PATA needs an extra lockingBartlomiej Zolnierkiewicz
Commit log for commit 517d3cc15b36392e518abab6bacbb72089658313 ("[libata] ata_piix: Enable parallel scan") says: This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. and it is all true but once we put all things together additional constraints for PATA controllers show up (some hardware registers have per-host not per-port atomicity) and we risk misprogramming the controller. I used the following test to check whether the issue is real: @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_ (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); - if (is_slave) + if (is_slave) { + if (ap->port_no == 0) { + u8 tmp = slave_data; + + while (slave_data == tmp) { + pci_read_config_byte(dev, slave_port, &tmp); + msleep(50); + } + + dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan " + "race detected\n"); + } pci_write_config_byte(dev, slave_port, slave_data); + } /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ and it indeed triggered the error message. Lets fix all such races by adding an extra locking to ->set_piomode and ->set_dmamode methods for PATA controllers. [ Alan: would be better to take the host lock in libata-core for these cases so that we fix all the adapters in one swoop. "Looks fine as a temproary quickfix tho" ] Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
2009-08-31ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889ATakashi Iwai
This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1 quirk with ALC889A codec, which caused the silent headphone output. Also, this gives the individual Headphone and Speaker volume controls. Reference: kernel bug#14078 http://bugzilla.kernel.org/show_bug.cgi?id=14078 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-31ALSA: hda - Add missing mux check for VT1708Takashi Iwai
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name styleJoe Perches
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors.Randy Dunlap
Reported-by: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is trueShine Liu
We should call em28xx_ir_init(dev) only when disable_ir is true. Signed-off-by: Shine Liu <shinel@foxmail.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12457): zr364: wrong indexesRoel Kluin
The order of indexes is reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfacesUdi Atar
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12450): Siano: Fixed SDIO compilation bugsUdi Atar
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xxMauro Carvalho Chehab
[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues] Signed-off-by: Steve Gotthardt <gotthardt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devicesMichael Krufky
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31drm: fix two issues with fb consolidation.Dave Airlie
Set accel to none, we really don't want anyone thinking fb is an accel interface. Pass pitch not depth to function for intel. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 21:45:20 +0000