summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-04-22b43legacy: Fixes for beaconingLarry Finger
This patch ports the beaconing fixes from commit a82d992261f "b43: Beaconing fixes" to b43legacy. Basically it prevents the card from triggering the beacon IRQ over and over again. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Tested-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: convert mutex assert to macroJohannes Berg
That will make the various cases where the WARN_ON can happen distinguishable. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove obsolet signal quality calculationChristian Lamparter
The signal quality percentage is now calculated by mac80211 stack. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: utilize all available key slots for decryption offloadChristian Lamparter
This patch takes care of outstanding TODOs: /* TODO: some devices have 4 more free slots for rx keys */ Now the driver can utilize all available key slots instead of just 4. Obviously, this helps most in AP/IBSS(/MESH) mode, when we have to use more different keys. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: Fix broken rfkill LED in 2.6.30-rc1Larry Finger
The rfkill system fails to issue a LED trigger event when the rfkill state changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43: Remove unnecessary MMIO in interrupt hotpathMichael Buesch
This removes unnecessary MMIO accesses in the interrupt hotpath. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: fix warning about %zd:John W. Linville
drivers/net/wireless/libertas/rx.c: In function ‘lbs_process_rxed_packet’: drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘__le32’ drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 5 has type ‘unsigned int’ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: adding interrupt counter in debugfs for debuggingWey-Yi Guy
This patch adds interrupt statistics report to debugfs, this can help to understand number of interrupts happened which including HW/SW error for easier and better debugging. in /sys/kernel/debug/ieee80211/phyN/iwlagn/data directory use "cat interrupt" to view the current interrupt counter use "echo 0 > interrupt" to clear interrupt counter Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlcore: fix channel display in debugfsMohamed Abbas
Fix displaying of wrong channel information when user query channel through debugfs Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: check triple_stream_basic_rates in iwl_full_rxon_requiredDaniel C Halperin
For completeness, we should also make sure that the 3x3 MIMO rates are also checked when seeing if one rxon struct matches another. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlagn: Sync rxon active with changesMohamed Abbas
We need to sync rxon_active with changes after we commit rxon_assoc, without rxon_active will still have the old data that cause iwl_send_rxon_assoc to fail with no change in rxon command. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: do not set dual_stream_ant_msk for 3 streamsDaniel C Halperin
This patch fixes a bug introduced by commit "iwlwifi: adding MIMO3 support in rate scaling". We should not set the dual_stream_ant_msk (for 2x2 MIMO) when using a 3x3 rate, this will cause a SYSASSERT in uCode. Note: there is no triple_stream_ant_msk, because all three antennas are used. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: Display decoded rate/mcs informationWey-Yi Guy
This patch adding MCS information in rate_scale_table, it help for debugging rate scaling algorithm, easy to understand what is the current rate scale table and matching modulation, plus the last mcs used for tx. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_reset_tsf from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_reset_tsf from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_get_tx_stats from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_get_tx_stats from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_config_interface from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_config_interface from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: add config_ap lib opAbhijeet Kolekar
add config_ap lib op to iwlwifi and iwl3945 in preparation of future 3945 porting actions. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_config from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_config from iwlwifi Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_remove_interface from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_remove_interface from iwlwifi Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_add_interface from iwlwifiAbhijeet Kolekar
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_set_mode in 3945Abhijeet Kolekar
3945 can now use iwl_set_mode from iwlcore library. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: add set_rxon_chain opAbhijeet Kolekar
add set_rxon_chain op to iwlwifi cfg ops in preparation of future 3945 porting work. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_get_sta_id from iwlwifiAbhijeet Kolekar
iwl3945 can now use iwl_get_sta_id. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945/iwlwifi: unify add_station functionAbhijeet Kolekar
Patch unifies the add_station function for 3945 and iwlwifi drivers. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: use station management opsAbhijeet Kolekar
Patch replaces station management functions with ops declared. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: replace station function with station opsAbhijeet Kolekar
Patch replaces station function used in driver by station management ops in 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: add station management opsAbhijeet Kolekar
This patch adds declarations for station management ops to iwlwifi drivers. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: delay mode settingAbhijeet Kolekar
Delay mode setting till uCode is ready. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: add commit_rxon libAbhijeet Kolekar
Patch adds commit_rxon lib operation to iwlwifi and iwl3945 drivers. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_beacon_updateAbhijeet Kolekar
3945 can use iwl_mac_beacon_update. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_bss_info_changedAbhijeet Kolekar
3945 can use iwl_bss_info_changed. A new lib op is created for post_assoicate to distinguish between 3945 and iwlwifi's post_associate operations. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: update injection documentationJohannes Berg
We don't currently support antenna or rate setting, so remove that. Also update the link -- the current one is dead and the wiki can be kept updated easier. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: re-upload keys only after telling driver about associationJohannes Berg
In the normal WPA or RSN case keys are only configured after associating, so we should do that in that order when resuming as well. It shouldn't really matter since we do not send any data at either point, but iwlwifi prefers it this way and it does seem more natural. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: add support for Marvell SD8688 chipBing Zhao
libertas: add support for Marvell SD8688 chip Use RxPD->pkt_ptr to locate eth803 header in the packet received since SD8688/v10 firmware allows a gap between RxPD and eth803 header. Set SDIO block size to 256 for CMD53. The maximum block size for SD8688 WLAN function is set to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size results upto 2K bytes data (4 blocks) being transferred and causes buffer overflow in firmware. Both changes above are backward compatible with earlier firmware versions for SD8385/SD8686. The SDIO_DEVICE_IDs for SD8688 chip are added in include/linux/mmc/sdio_ids.h Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: get rid of busy-wait loopsMax Filippov
p54spi_wakeup and p54spi_tx_frame used busy-waiting loop to poll for 'ready' bits in SPI_ADRS_HOST_INTERRUPTS register. With this change in place 'WR_READY timeout' messages do not show anymore. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: add support for Fukato Datacask Jupiter LEDsBob Copeland
This adds support for the LEDs on the Jupiter netbook. Reported-by: Martin Bammer <mrb74@gmx.at> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: increase spi driver thread priorityAnna Neal
Currently, the libertas main thread contends with the spi driver thread in the TX path. To improve throughput, ensure that the driver thread has higher scheduling priority than the libertas main thread. Do this by making the libertas spi driver thread a low priority real time thread. We measured an average throughput improvement of 13%. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: add cipher capabilitiesJohannes Berg
This adds the necessary code and fields to let drivers specify their cipher capabilities and exports them to userspace. Also update mac80211 to export the ciphers it has. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: send regulatory beacon hint events to userspaceLuis R. Rodriguez
This informs userspace when a change has occured on a world roaming wiphy's channel which has lifted some restrictions due to a regulatory beacon hint. Because this is now sent to userspace through the regulatory multicast group we remove the debug prints we used to use as they are no longer necessary. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: add netlink channel put helperLuis R. Rodriguez
This adds a netlink channel put helper, nl80211_msg_put_channel(), which we will also make use of later for the beacon hints events. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: respect API on orig_flags on channel for beacon hintLuis R. Rodriguez
As part of our documented API we always respect the orig_flag settings on a channel. We forgot to follow this for the beacon hints. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: add debug messages when start aggregation queueWey-Yi Guy
This patch adding few more debug messages if encounter error when driver try to start tx aggregation queue. Also change from IWL_ERR to IWL_DEBUG_HT is the HW legacy queue is empty when driver request to move to aggregation queue. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: adding MIMO3 support in rate scalingWey-Yi Guy
Separated the MIMO tpt matrix into MIMO2 and MIMO3, adding MIMO3 support in rate scaling algorithm. If the device support 3x3, then utilize all three antenna (A/B/C) for tx to improve throughput. Adding rs_switch_to_mimo3() function to allow switch to mimo3 modulation mode from other modes(legacy/siso/mimo2). Adding rs_move_mimo3_to_other() function to allow switch from mimo3 modulation mode to either siso or mimo2; also support toggle between SGI and NGI. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: adding triple stream rate support for MIMO3Wey-Yi Guy
Adding ht triple_stream_basic_rates for MIMO3 supports Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: fix interpolation with equal power levelsFabio Rossi
When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by: Fabio Rossi <rossi.f@inwind.it> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43legacy: Do not select HW_RANDOMLarry Finger
Auto-depend on HW_RANDOM, rather than "select"ing it. This way the user has the choice to enable or disable HWRNG support. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: Report rejected association to user space SMEJouni Malinen
When using nl80211 association, we need to send association response with a failure code to user space SME instead of just internally trying to send out the same (re)association request again couple of times. This fixes problems in association process getting stuck on a failure when user space is not notified in any way that something actually failed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: include HT capabilities in probe requestJohannes Berg
Include the HT capabilities in the probe request frame. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: pass all probe request IEs to driverJohannes Berg
Instead of just passing the cfg80211-requested IEs, pass the locally generated ones as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: introduce scan IE limit attributeJohannes Berg
This patch introduces a new attribute for a wiphy that tells userspace how long the information elements added to a probe request frame can be at most. It also updates the at76 to advertise that it cannot support that, and, for now until I can fix that, iwlwifi too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 15:36:03 +0000