summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-02-24netem: define NETEM_DIST_MAXstephen hemminger
Rather than magic constant in code, expose the maximum size of packet distribution table in API. In iproute2, q_netem defines MAX_DIST as 16K already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: use vmalloc for distribution tablestephen hemminger
The netem probability table can be large (up to 64K bytes) which may be too large to allocate in one contiguous chunk. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: cleanup dump codestephen hemminger
Use nla_put_nested to update netlink attribute value. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-02-24ipv4: Rearrange how ip_route_newports() gets port keys.David S. Miller
ip_route_newports() is the only place in the entire kernel that cares about the port members in the routing cache entry's lookup flow key. Therefore the only reason we store an entire flow inside of the struct rtentry is for this one special case. Rewrite ip_route_newports() such that: 1) The caller passes in the original port values, so we don't need to use the rth->fl.fl_ip_{s,d}port values to remember them. 2) The lookup flow is constructed by hand instead of being copied from the routing cache entry's flow. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24igb: update version stringCarolyn Wyborny
This will synchronize the version with the out of tree driver which shares its functionality. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: Update Intel copyright notice for driver source.Carolyn Wyborny
This fix updates copyright information to include current year 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: add support for VF Transmit rate limit using iproute2Lior Levy
Implemented igb_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated igb_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up. The rate limit value can be ranged between 0 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported only by 82576 device. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igbvf: remove Tx hang detectionLior Levy
Removed Tx hang detection mechanism from igbvf. This mechanism has no affect and can cause false alarm message in some cases. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbevf: Fix name of function in function header commentGreg Rose
Some of the function names in function header comments did not match actual name of the function. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbevf: Enable jumbo frame support for X540 VFGreg Rose
The X540 controller allows jumbo frame setup on a per VF basis. Enable use of jumbo frames when the VF device belongs to the X540 controller. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbe: Enable Jumbo Frames on the X540 10Gigabit ControllerGreg Rose
The X540 controller supports jumbo frames in SR-IOV mode. Allow configuration of jumbo frames either in the PF driver or on behalf of a VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-23xfrm: Const'ify xfrm_address_t args to xfrm_state_find.David S. Miller
This required a const'ification in xfrm_init_tempstate() too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Remove unused 'saddr' and 'daddr' args to xfrm_state_look_at.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify xfrm_address_t args to __xfrm_state_lookup{,_byaddr}.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify xfrm_tmpl arg to xfrm_init_tempstate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify xfrm_address_t args to xfrm_*_hash.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify sec_path arg to secpath_has_nontransport.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify ptr args to xfrm_policy_ok.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify ptr args to xfrm_state_ok.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify ptr args to xfrm_state_*_check and xfrm_state_kern.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify xfrm_tmpl and xfrm_state args to xfrm_state_addr_cmp.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify selector arg to xfrm_dst_update_parent.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify policy arg to clone_policy.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify policy arg to xp_net.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify policy arg and local selector in xfrm_policy_match.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify local xfrm_address_t pointers in xfrm_policy_lookup_bytype.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify selector args in xfrm_migrate paths.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify address args to hash helpers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify pointer args to km_migrate() and implementations.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify pointer args to migrate_tmpl_match and xfrm_migrate_checkDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify address argument to xfrm_addr_any()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify address arguments to xfrm_addr_cmp()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify address arguments to __xfrm_dst_lookup()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify address arguments to ->dst_lookup()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify selector argument to xfrm_selector_match()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify tmpl and address arguments to ->init_temprop()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Pass km_event pointers around as const when possible.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23Merge branch 'tipc-Feb23-2011' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/net-next-2.6
2011-02-23tipc: Avoid reliable broadcast preparation for NACK messagesAllan Stephens
Enhance TIPC to skip unnecessary (and, in some cases, redundant) preparation work when sending a broadcast link NACK message, since this preparation is only required for broadcast messages that are sent in a reliable manner. This change also fixes a bug that caused NACK messages to be improperly counted as "TX packets" in TIPC's broadcast link statistics. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Remove unused message header field for requested number of linksAllan Stephens
Eliminates support for the "number of requested links" field in a neighbor discovery message. This field was never used and has been removed from the TIPC 2.0 protocol specification. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Remove support for per-connection message sequence numberingAllan Stephens
Eliminates TIPC's prototype support for message sequence numbering on routable connections (i.e. connections requiring more than one hop). This capability isn't currently used, and can be removed since TIPC only supports systems in which all inter-node communication can be achieved in a single hop. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Add in missing lock during link initializationAllan Stephens
Ensure that the routine that starts up processing on a newly created link endpoint takes the spinlock of the node object that owns the link, to prevent possible conflicts with processing involving other links owned by that node object. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Fix port counter handling to correct congestion controlAllan Stephens
Modifies TIPC's congestion control between a connected port and its peer so that it works as documented. The following changes have been made: 1) The counter of the number of messages sent by a port now starts at zero, rather than one. This prevents the port from reporting port congestion one message earlier than it was supposed to. 2) The counter of the number of messages sent by a port is now incremented only if a non-empty message is sent successfully. This prevents the port from becoming permanently congested if too many send attempts are unsuccessful because of congestion (or other reasons). It also removes the risk that empty hand- shaking messages used during connection setup might cause the port to report congestion earlier than it was supposed to. 3) The counter of the number of unacknowledged messages received by a port controlled by an internal TIPC service is now incremented only if the message is non-empty, in order to be consistent with the aforementioned changes. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Minor optimization to topology service connection establishmentAllan Stephens
Eliminates a local iovec structure containing no data, which was previously used during the establishment of a topology service connection, since the same effect can be achieved by passing in a NULL pointer and an iovec length of zero. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Set unused probe field of link protocol messages to defined valueAllan Stephens
Ensures that a link reset or activate message has a "probe" field of zero. (This field is currently unused in these messages, but this could potentially change in future versions of TIPC.) Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Improve accuracy of link transmit queue maximum size statisticAllan Stephens
Enhances TIPC's unicast and broadcast link code to update the transmit queue maximum size counter in a single place, namely the routine that adds messages to the queue. This ensures that the maximum size statistic reported for unicast links is completely accurate, rather than being partially based on statistical sampling. The changes to link.h are just documenting the roles of the variables. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Eliminate unnecessary locking when starting topology serviceAllan Stephens
Modifies the initialization code for TIPC's topology service to avoid taking the spinlock protecting the subscriber list, since there is no need to do this. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Clean up tracking of node requesting a broadcast retransmitAllan Stephens
Allows the broadcast link to track the node that is requesting a retransmit in a new field dedicated to that purpose. This replaces the existing mechanism that (ab)uses an existing node structure linked list field to do the tracking. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Clean out all remaining instances of #if 0'd unused codeAllan Stephens
Remove all instances of legacy or proposed-but-not-implemented code that lives within an #if 0 ... #endif block. If some of it is needed in the future it can recovered out of history, but there is no need for it to clutter up the active code base. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-24 10:28:33 +0000