summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-10-15ARM: mach-shmobile: add TMU platform data for sh7372Magnus Damm
This patch adds support for the two first channels of the TMU0 timer block on sh7372. One channel is used for clock event, the other for clock source. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15fbdev: sh_mobile_hdmi: add support for the "video=" kernel command line optionGuennadi Liakhovetski
Add support for specifying video modes on the kernel command line. Mode selection priorities are also changed such, that only exact matches of specified modes with monitor modes from EDID are accepted, at least in width and height. If none found - fall back to framebuffer default setting, if available. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15fbdev: sh_mobile_lcdc: relax .check_var() HSYNC testGuennadi Liakhovetski
Some valid and supported video modes have .hsync_len > 120. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15ARM: mach-shmobile: remove videomodes from ap4evb platform dataGuennadi Liakhovetski
Now that HDMI videomodes have become optional, they can be safely removed from ap4evb platform data, since anyway 720p seems to be the best supported mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15fbdev: sh_mobile_lcdc: make platform videomode table optionalGuennadi Liakhovetski
Add a default 720p mode to the sh_mobile_lcdc driver to be used, when no videomode is specified in the platform data. This can be used, e.g., with HDMI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15ARM: mach-shmobile: clock-sh7372: FSI parent select supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15ARM: mach-shmobile: clock-sh7372: add sh7372_ prefix to global clocksKuninori Morimoto
This patch also registered global extal clocks to sh7372.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13ARM: shmobile: use device name for timer clocksMagnus Damm
Move SH-Mobile ARM systems over from the legacy "clk" member of struct sh_timer_config to using the device name and clkdev for clock matching. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13ARM: shmobile: make AP4EVB MMCIF resource string consistentMagnus Damm
Just use MMCIF as name to match the sh7372 data sheet. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13ARM: shmobile: break out sh7372 platform devicesMagnus Damm
This patch introduces sh7372_late_devices which should include all regular processor specific platform devices. Early platform devices for console and timers should be put on the sh7372_early_devices list, all other devices should be on sh7372_late_devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06arm/shmobile: remove duplicated includeNicolas Kaiser
Remove duplicated include. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06sh: fix an ms7724se compile breakageGuennadi Liakhovetski
Fix a compile breakage, caused by my own careless copy-paste. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16ARM: mach-shmobile: modify wrong array size of div6_reparent_clksKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16fbdev: sh_mobile_lcdc: reconfigure the framebuffer, when freeGuennadi Liakhovetski
Currently the sh_mobile_lcdc driver only reconfigures the hardware interface, when a new monitor is plugged in. This patch adds support for dynamic framebuffer reconfiguration, when no user is holding the framebuffer device node open. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: ap4evb: modify touchpanel judgment conditionKuninori Morimoto
Current touchpanel had below 2 issues - LCDD2 pin which is needed for WVGA was changed to IRQ28_123 pin on ts_get_pendown_state - GPIO pull up on ts_init was disabled by gpio_request on ts_get_pendown_state. This mean the return value from gpio_get_value is untrusted. This patch solve these issues Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: add two more video modes for HDMIGuennadi Liakhovetski
Add video modes for 480p and SXGA (1280x1024). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: support hot-plugging of different HDMI / DVI displaysGuennadi Liakhovetski
With this patch hot-plugging of an HDMI or a DVI monitor can select a different video mode and reconfigure the LCDC and HDMI controllers accordingly. Due to a lack of a standard API to inform framebuffer users of a changed video mode, the framebuffer configuration is preserved regardless of a specific mode, selected for the monitor. As described in a previous patch, this leads to smaller framebuffers being displayed on larger monitors or a part of a larger framebuffer being displayed on a smaller resolution monitor. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: improve HDMI PHY parameters for high resolutionsGuennadi Liakhovetski
High monitor resolutions also require higher clock frequencies, current HDMI PHY parameters do not work well for resolutions higher than 720p. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: cosmetic improvementsGuennadi Liakhovetski
Improve comments, unify function names, replace pr_debug with dev_dbg. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: separate display variable data from framebuffer dataGuennadi Liakhovetski
This is a preparation for a patch, that shall allow displaying of a smaller framebuffer on a bigger display and of a part of a bigger framebuffer on a smaller display. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: implement lockingGuennadi Liakhovetski
The SH-Mobile HDMI driver runs in several contexts: ISR, delayed work-queue, task context, when called from the sh_mobile_lcdc framebuffer driver. This creates ample race possibilities. Even though most these races are purely theoretical, it is better to close them. To trace fb_info validity we install a notification callback in the HDMI driver, and the only way for it to get to driver internal data is by using struct sh_mobile_lcdc_chan, therefore it had to be extracted into a separate common header. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: enable "external" modeGuennadi Liakhovetski
The SH-Mobile HDMI controller supports two configuration modes: using pre-programmed VICs and the "external" mode - specifying video parameters explicitly. The driver already contains code, necessary to configure HDMI manually, this patch actually enables it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: add initial support for modes, other than 720pGuennadi Liakhovetski
To support standard video modes, other than 720p, the HDMI PHY configuration has to be adjusted and the VIC has to be sent to the display. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: allocate memory, sufficient for the biggest modeGuennadi Liakhovetski
Now, that we add support for multiple modes to the sh_mobile_lcdcfb driver, it has to allocate memory, sufficient for the biggest of them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: fix notifier callback return codesGuennadi Liakhovetski
Notifier callbacks have to return either one of NOTIFY_* codes or a negative errno, converted to a suitable value by the notifier_from_errno() inline, if the notifier chain shall not be continued. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform dataGuennadi Liakhovetski
This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: minor simplifications and clean upGuennadi Liakhovetski
Remove an unused variable and simplify several pointer dereferences. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: fix more error pathsGuennadi Liakhovetski
This patch fixes the following two erroneous error paths: hw_usecnt is allocated with a value of 0, therefore in an early error case, calling sh_mobile_lcdc_clk_off() will wrongly conclude, that hw_usecnt has already been incremented. Then sh_mobile_lcdc_runtime_suspend() will be called, which will access uninitialised data fields and crash the kernel. sh_mobile_lcdc_stop() can be called before framebuffer has been allocated, then ch->info is NULL and dereferencing it will Oops too. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_hdmi: simplify the EDID reading procedureGuennadi Liakhovetski
The present SH-Mobile HDMI driver reads and parses the EDID block into a variable screeninfo object, but since it is still unable to dynamically reconfigure the framebuffer, it overwrites the EDID information with preset values again. This patch just uses a temporary variable to store the EDID timing information instead. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh_mobile_lcdcfb: use fb_videomode_to_var() instead of open-codingGuennadi Liakhovetski
Use the standard fb_videomode_to_var() instead of filling fb_var_screeninfo fields manually in, also remove a redundant memset(0). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: sh7372: modify INTCS tableKuninori Morimoto
Add ignored device name by comment-out in INTCS. And MSIOF which has been forgotten is added Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: pfc-sh7372: modify wrong commentKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: Use evt2irq() for sh7372 DMACMagnus Damm
Use evt2irq() for DMAC resources on sh7372. This makes the code easier to read and also allows adjusting the INTC base offset without breaking platform data. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: Extend AP4EVB LCD commentsMagnus Damm
Extend dip switch comments for QHD and WVGA LCD panels on AP4EVB. Similar to the Ecovec comments. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14fbdev: sh-mobile_hdmi: remove un-necessity settingsKuninori Morimoto
Current gamut, acp, isrc1, isrc2 settings are wrong, and not necessary for now. Tested-by: Takanari Hayama <taki@igel.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14ARM: mach-shmobile: ap4evb: modify tsc2007 platform settingsKuninori Morimoto
This patch modify x_plate_ohms to correct value for tsc2007, and removed un-necessary ts_get_pendown_state(). gpio_pull_up() was removed also. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-13Merge branch 'sched/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Improve latencies under load by decreasing minimum scheduling granularity
2010-09-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k,m68knommu: Wire up fanotify_init, fanotify_mark, and prlimit64
2010-09-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix siglock Quoth Tony: "I committed the fix for this last week prior to your -rc4 announcement reminding us to give proper "Reported-by:" credit. This one should have had: Reported-by: Tony Ernst <tee@sgi.com> and also Much-useful-investigation-and-tracing-by: Hedi Berriche <hedi@sgi.com> Much-useful-investigation-and-tracing-by: Petr Tesarik <ptesarik@novell.com>"
2010-09-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: prevent possible memory corruption in cifs_demultiplex_thread cifs: eliminate some more premature cifsd exits cifs: prevent cifsd from exiting prematurely [CIFS] ntlmv2/ntlmssp remove-unused-function CalcNTLMv2_partial_mac_key cifs: eliminate redundant xdev check in cifs_rename Revert "[CIFS] Fix ntlmv2 auth with ntlmssp" Revert "missing changes during ntlmv2/ntlmssp auth and sign" Revert "Eliminate sparse warning - bad constant expression" Revert "[CIFS] Eliminate unused variable warning"
2010-09-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Don't use dotl version of mknod for dotu inode operations fs/9p: Use the correct dentry operations 9p: Check for NULL fid in v9fs_dir_release() fs/9p: Fix error handling in v9fs_get_sb fs/9p, net/9p: memory leak fixes
2010-09-13Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: dquot: do full inode dirty in allocating space
2010-09-13Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: move probe call to subsys_initcall() powerpc/5200: mpc52xx_uart.c: Add of_node_put to avoid memory leak spi/pl022: fix APB pclk power regression on U300 spi/spi_s3c64xx: Warn if PIO transfers time out spi/s3c64xx: Fix incorrect reuse of 'val' local variable. spi/s3c64xx: Fix compilation warning spi/dw_spi: clean the cs_control code spi/dw_spi: Allow interrupt sharing spi/spi_s3c64xx: Increase dead reckoning time in wait_for_xfer() spi/spi_s3c64xx: Move to subsys_initcall() spi: free children in spi_unregister_master, not siblings gpiolib: Add 'struct gpio_chip' forward declaration for !GPIOLIB case of: Fix missing includes - ll_temac spi/spi_s3c64xx: Staticise non-exported functions spi/spi_s3c64xx: Make probe more robust against missing board config
2010-09-13m68k,m68knommu: Wire up fanotify_init, fanotify_mark, and prlimit64Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2010-09-13sched: Improve latencies under load by decreasing minimum scheduling granularityIngo Molnar
Mathieu reported bad latencies with make -j10 kind of kbuild workloads - which is mostly caused by us scheduling with a too coarse granularity. Reduce the minimum granularity some more, to make sure we can meet the latency target. I got the following results (make -j10 kbuild load, average of 3 runs): vanilla: maximum latency: 38278.9 µs average latency: 7730.1 µs patched: maximum latency: 22702.1 µs average latency: 6684.8 µs Mathieu also measured it: | | * wakeup-latency.c (SIGEV_THREAD) with make -j10 | | - Mainline 2.6.35.2 kernel | | maximum latency: 45762.1 µs | average latency: 7348.6 µs | | - With only Peter's smaller min_gran (shown below): | | maximum latency: 29100.6 µs | average latency: 6684.1 µs | Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTi=8m4g01wZPacySoF7U0PevTNVgJoZZrHiUD-pN@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-13fs/9p: Don't use dotl version of mknod for dotu inode operationsAneesh Kumar K.V
We should not use dotlversion for the dotu inode operations Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-13fs/9p: Use the correct dentry operationsAneesh Kumar K.V
We should use the cached dentry operation only if caching mode is enabled Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-139p: Check for NULL fid in v9fs_dir_release()jvrao
NULL fid should be handled in cases where we endup calling v9fs_dir_release() before even we instantiate the fid in filp. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-13fs/9p: Fix error handling in v9fs_get_sbAneesh Kumar K.V
This was introduced by 7cadb63d58a932041afa3f957d5cbb6ce69dcee5 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-13fs/9p, net/9p: memory leak fixesLatchesar Ionkov
Four memory leak fixes in the 9P code. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-12 23:58:20 +0000