summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-03-12genirq: Add chip flag to force mask on suspendThomas Gleixner
On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-11genirq: Add desc->irq_data accessorThomas Gleixner
We have accessors for all fields in irq_data based on irq_desc, but not for irq_data itself. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-08genirq: Add comments to Kconfig switchesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sam Ravnborg <sam@ravnborg.org>
2011-03-02genirq: Fixup fasteoi handler for oneshot modeThomas Gleixner
The fasteoi handler must mask the interrupt line in oneshot mode otherwise we end up with an irq storm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-26genirq: Provide forced interrupt threadingThomas Gleixner
Add a commandline parameter "threadirqs" which forces all interrupts except those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to allow retrieving better debug data from crashing interrupt handlers. If "threadirqs" is not enabled on the kernel command line, then there is no impact in the interrupt hotpath. Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after marking the interrupts which cant be threaded IRQF_NO_THREAD. All interrupts which have IRQF_TIMER set are implict marked IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded. Forced threading hard interrupts also forces all soft interrupt handling into thread context. When enabled it might slow down things a bit, but for debugging problems in interrupt code it's a reasonable penalty as it does not immediately crash and burn the machine when an interrupt handler is buggy. Some test results on a Core2Duo machine: Cache cold run of: # time git grep irq_desc non-threaded threaded real 1m18.741s 1m19.061s user 0m1.874s 0m1.757s sys 0m5.843s 0m5.427s # iperf -c server non-threaded [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec threaded [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 937 Mbits/sec Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.772668648@linutronix.de>
2011-02-25sched: Switch wait_task_inactive to schedule_hrtimeout()Thomas Gleixner
When we force thread hard and soft interrupts the startup of ksoftirqd would hang in kthread_bind() when wait_task_inactive() calls schedule_timeout_uninterruptible() because there is no softirq yet which will wake us up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.677109139@linutronix.de>
2011-02-25genirq: Add IRQF_NO_THREADThomas Gleixner
Some low level interrupts cannot be threaded even when we force thread all interrupt handlers. Add a flag to annotate such interrupts. Add all timer interrupts to this category by default. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.578893460@linutronix.de>
2011-02-25genirq: Allow shared oneshot interruptsThomas Gleixner
Support ONESHOT on shared interrupts, if all drivers agree on it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.483640430@linutronix.de>
2011-02-25genirq: Prepare the handling of shared oneshot interruptsThomas Gleixner
For level type interrupts we need to track how many threads are on flight to avoid useless interrupt storms when not all thread handlers have finished yet. Keep track of the woken threads and only unmask when there are no more threads in flight. Yes, I'm lazy and using a bitfield. But not only because I'm lazy, the main reason is that it's way simpler than using a refcount. A refcount based solution would need to keep track of various things like crashing the irq thread, spurious interrupts coming in, disables/enables, free_irq() and some more. The bitfield keeps the tracking simple and makes things just work. It's also nicely confined to the thread code pathes and does not require additional checks all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.388095876@linutronix.de>
2011-02-25genirq: Make warning in handle_percpu_event usefulThomas Gleixner
The WARN_ON_ONCE in handle_percpu_event() which emits a warning when an action handler returns with interrupts enabled is not really useful. It does not reveal the interrupt number and handler function which caused it. Make it WARN_ONCE() and add the information. Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22genirq: Streamline kernel/irq/KconfigJan Beulich
"def_bool n" without prompt is pointless, these should be just "bool". [ tglx: Adapted to latest changes ] Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4D5D3309020000780003264A@vpn.id2.novell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22genirq: Use the correct variable for note_interruptThomas Gleixner
note_interrupt wants to be called with the combined result of all handlers called, not with the last one. If it's a shared interrupt then the last handler might return IRQ_NONE often enough to trigger the spurious dectector which turns off a perfectly fine working interrupt line. Bug was introduced in commit 1277a532(genirq: Simplify handle_irq_event()). Yes, I really messed up there. First the variable ret should not have been named differently to avoid similarity with retval. Second it should have been declared in the do {} loop. Rename it to res and move it into the do {} loop and vanish under a huge brown paperbag. Reported-bisected-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-21genirq: Add missing break in __irq_set_trigger()Thomas Gleixner
The switch case in __irq_set_trigger() lacks a break, which emits a pr_err unconditionally on success. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-21genirq: Use IRQ_BITMAP_BITS as search size in irq_alloc_descs()Yinghai Lu
The runtime expansion of nr_irqs does not take into account that bitmap_find_next_zero_area() returns "start" + size in case the search for an matching zero area fails. That results in a start value which can be completely off and is not covered by the following expand_nr_irqs() and possibly outside of the absolute limit. But we use it without further checking. Use IRQ_BITMAP_BITS as the limit for the bitmap search and expand nr_irqs when the start bit is beyond nr_irqs. So start is always pointing to the correct area in the bitmap. nr_irqs is just the limit for irq enumerations, not the real limit for the irq space. [ tglx: Let irq_expand_nr_irqs() take the new upper end so we do not expand nr_irqs more than necessary. Made changelog readable ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4D6014F9.8040605@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-21genirq: Fix misplaced status update in irq_disable()Thomas Gleixner
We lazy disable interrupt lines, so only mark the line masked, when the chip provides an irq_disable callback. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Implement irq_data based move_*_irq() versionsThomas Gleixner
No need to lookup the irq descriptor when calling from a chip callback function which has irq_data already handy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq; Add fasteoi irq_chip quirkThomas Gleixner
Some chips want irq_eoi() only called when an interrupt is actually handled. So they have checks for INPROGRESS and DISABLED in their irq_eoi callbacks. Add a chip flag, which allows to handle that in the generic code. No impact on the fastpath. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add preflow handler supportThomas Gleixner
sparc64 needs to call a preflow handler on certain interrupts befor calling the action chain. Integrate it into handle_fasteoi_irq. Must be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David S. Miller <davem@davemloft.net>
2011-02-19genirq: Consolidate set_chip_handler functionsThomas Gleixner
No need to have separate functions if we have one plus inline wrappers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use irq_get/put functionsThomas Gleixner
Convert the management functions to use the common irq_get/put function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Implement irq_get/put_desc_[bus]locked/unlock()Thomas Gleixner
Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove real old transition functionsThomas Gleixner
These transition helpers are stale for years now. Remove them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove desc->status when GENERIC_HARDIRQS_NO_COMPAT=yThomas Gleixner
If everything uses the right accessors, then enabling GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you. Don't be lazy and use the trick which I use in the core code! git grep status_use_accessors will unearth it in a split second. Offenders are tracked down and not slapped with stinking trouts. This time we use frozen shark for a better educational value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reflect IRQ_MOVE_PCNTXT in irq_data stateThomas Gleixner
Required by x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move wakeup state to irq_dataThomas Gleixner
Some irq_chips need to know the state of wakeup mode for setting the trigger type etc. Reflect it in irq_data state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQCHIP_SET_TYPE_MASKED flagThomas Gleixner
irq_chips, which require to mask the chip before changing the trigger type should set this flag. So the core takes care of it and the requirement for looking into desc->status in the chip goes away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de>
2011-02-19genirq: Add flags to irq_chipThomas Gleixner
Looking through irq_chip implementations I noticed that some of them have special requirements, like setting the type masked and therefor fiddle in irq_desc->status. Add a flag field, so the core code can handle it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Cleanup irq.hThomas Gleixner
Put the constants into an enum and document them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Force wrapped access to desc->status in core codeThomas Gleixner
Force the usage of wrappers by another nasty CPP substitution. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Wrap the remaning IRQ_* flagsThomas Gleixner
Use wrappers to keep them away from the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner
That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AFFINITY_SET to coreThomas Gleixner
Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reuse existing can set affinty checkThomas Gleixner
Add a !desc check while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move debug code to separate headerThomas Gleixner
It'll break when I'm going to undefine the constants. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CHECK_IRQ_PER_CPU from core codeThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Make CHECK_IRQ_PER_CPU an inline and deprecate itThomas Gleixner
Its' too ugly and needs to go. The only users are core code and parisc. Core code does not need it and parisc gets a new check once IRQ_PER_CPU is reflected in irq_data.state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CONFIG_IRQ_PER_CPUThomas Gleixner
The saving of this switch is minimal versus the ifdef mess it creates. Simple enable PER_CPU unconditionally and remove the config switch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add state field to irq_dataThomas Gleixner
Some chip implementations need to access certain status flags. With sparse irqs that requires a lookup of the irq descriptor. Add a state field which contains such flags. Name it in a way which will make coders happy to access it with the proper accessor functions. And it's easy to grep for. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_WAKEUP to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SUSPENDED to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_PENDING flag to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_DISABLED to coreThomas Gleixner
Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_ONESHOT to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_INPROGRESS to coreThomas Gleixner
We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_POLL_INPROGRESS to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use modify_status for set_irq_nested_threadThomas Gleixner
No need for a separate function in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 12:46:03 +0000